static void
fujitsu_hk_sysctl_setup(struct fujitsu_hk_softc *sc)
{
const struct sysctlnode *rnode;
bool dummy_state;
if (fujitsu_hk_get_backlight(sc, &dummy_state) == 0) {
if ((sysctl_createv(&sc->sc_log, 0, NULL, &rnode,
0, CTLTYPE_NODE, "acpi", NULL,
NULL, 0, NULL, 0,
CTL_HW, CTL_CREATE, CTL_EOL)) != 0)
goto fail;
if ((sysctl_createv(&sc->sc_log, 0, &rnode, &rnode,
0, CTLTYPE_NODE, device_xname(sc->sc_dev),
SYSCTL_DESCR("Fujitsu hotkeys controls"),
NULL, 0, NULL, 0,
CTL_CREATE, CTL_EOL)) != 0)
goto fail;
(void)sysctl_createv(&sc->sc_log, 0, &rnode, NULL,
CTLFLAG_READWRITE, CTLTYPE_BOOL, "backlight",
SYSCTL_DESCR("Internal DFP backlight switch state"),
fujitsu_hk_sysctl_backlight, 0, (void *)sc, 0,
CTL_CREATE, CTL_EOL);
}
return;
fail:
aprint_error_dev(sc->sc_dev, "couldn't add sysctl nodes\n");
}
static void
sysctl_wmi_hp_setup(struct wmi_hp_softc *sc)
{
const struct sysctlnode *rnode;
int err;
err = sysctl_createv(&wmihp_sysctllog, 0, NULL, &rnode,
CTLFLAG_PERMANENT, CTLTYPE_NODE, "acpi", NULL,
NULL, 0, NULL, 0, CTL_HW, CTL_CREATE, CTL_EOL);
if (err != 0)
return;
err = sysctl_createv(&wmihp_sysctllog, 0, &rnode, &rnode,
0, CTLTYPE_NODE, "wmi", SYSCTL_DESCR("ACPI HP WMI"),
NULL, 0, NULL, 0, CTL_CREATE, CTL_EOL);
if (err != 0)
return;
if (wmi_hp_method_read(sc, WMI_HP_METHOD_CMD_ALS) == true) {
(void)sysctl_createv(NULL, 0, &rnode, NULL,
CTLFLAG_READWRITE, CTLTYPE_BOOL, "als",
SYSCTL_DESCR("Ambient Light Sensor"),
sysctl_wmi_hp_set_als, 0, NULL, 0, CTL_CREATE, CTL_EOL);
}
}
void
gpiopwm_attach(device_t parent, device_t self, void *aux)
{
struct gpiopwm_softc *sc = device_private(self);
struct gpio_attach_args *ga = aux;
const struct sysctlnode *node;
sc->sc_dev = self;
/* Map pin */
sc->sc_gpio = ga->ga_gpio;
sc->sc_map.pm_map = sc->_map;
if (gpio_pin_map(sc->sc_gpio, ga->ga_offset, ga->ga_mask,
&sc->sc_map)) {
aprint_error(": can't map pin\n");
return;
}
aprint_normal(" [%d]", sc->sc_map.pm_map[0]);
pmf_device_register(self, NULL, NULL);
callout_init(&sc->sc_pulse, CALLOUT_MPSAFE);
callout_setfunc(&sc->sc_pulse, gpiopwm_pulse, sc);
sysctl_createv(&sc->sc_log, 0, NULL, &node,
0,
CTLTYPE_NODE, device_xname(sc->sc_dev),
SYSCTL_DESCR("GPIO software PWM"),
NULL, 0, NULL, 0,
CTL_HW, CTL_CREATE, CTL_EOL);
if (node == NULL) {
printf(": can't create sysctl node\n");
return;
}
sysctl_createv(&sc->sc_log, 0, &node, NULL,
CTLFLAG_READWRITE,
CTLTYPE_INT, "on",
SYSCTL_DESCR("PWM 'on' period in ticks"),
gpiopwm_set_on, 0, (void *)sc, 0,
CTL_CREATE, CTL_EOL);
sysctl_createv(&sc->sc_log, 0, &node, NULL,
CTLFLAG_READWRITE,
CTLTYPE_INT, "off",
SYSCTL_DESCR("PWM 'off' period in ticks"),
gpiopwm_set_off, 0, (void *)sc, 0,
CTL_CREATE, CTL_EOL);
aprint_normal("\n");
return;
}
static void
acpicpu_sysctl(device_t self)
{
const struct sysctlnode *node;
int err;
KASSERT(acpicpu_log == NULL);
err = sysctl_createv(&acpicpu_log, 0, NULL, &node,
CTLFLAG_PERMANENT, CTLTYPE_NODE, "hw", NULL,
NULL, 0, NULL, 0, CTL_HW, CTL_EOL);
if (err != 0)
goto fail;
err = sysctl_createv(&acpicpu_log, 0, &node, &node,
CTLFLAG_PERMANENT, CTLTYPE_NODE, "acpi", NULL,
NULL, 0, NULL, 0, CTL_CREATE, CTL_EOL);
if (err != 0)
goto fail;
err = sysctl_createv(&acpicpu_log, 0, &node, &node,
0, CTLTYPE_NODE, "cpu", SYSCTL_DESCR("ACPI CPU"),
NULL, 0, NULL, 0, CTL_CREATE, CTL_EOL);
if (err != 0)
goto fail;
err = sysctl_createv(&acpicpu_log, 0, &node, NULL,
CTLFLAG_READWRITE, CTLTYPE_BOOL, "dynamic",
SYSCTL_DESCR("Dynamic states"), NULL, 0,
&acpicpu_dynamic, 0, CTL_CREATE, CTL_EOL);
if (err != 0)
goto fail;
err = sysctl_createv(&acpicpu_log, 0, &node, NULL,
CTLFLAG_READWRITE, CTLTYPE_BOOL, "passive",
SYSCTL_DESCR("Passive cooling"), NULL, 0,
&acpicpu_passive, 0, CTL_CREATE, CTL_EOL);
if (err != 0)
goto fail;
return;
fail:
aprint_error_dev(self, "failed to initialize sysctl (err %d)\n", err);
}
static void
obsled_attach(device_t parent, device_t self, void *aux)
{
struct obsled_softc *sc = device_private(self);
struct gpio_attach_args *ga = aux;
struct sysctlnode *node;
int err, node_mib;
char led_name[5];
/* int led = (1 << device_unit(sc->sc_dev)); */
snprintf(led_name, sizeof(led_name),
"led%d", (1 << device_unit(sc->sc_dev)) & 0x7);
aprint_naive(": OpenBlockS %s\n", led_name);
aprint_normal(": OpenBlockS %s\n", led_name);
sc->sc_dev = self;
sc->sc_tag = ga->ga_tag;
sc->sc_addr = ga->ga_addr;
sc->sc_led_state = 0;
obs266_led_set(OBS266_LED_OFF);
/* add sysctl interface */
err = sysctl_createv(NULL, 0,
NULL, NULL,
0, CTLTYPE_NODE,
"hw",
NULL,
NULL, 0, NULL, 0,
CTL_HW, CTL_EOL);
if (err != 0)
return;
err = sysctl_createv(NULL, 0,
NULL, (const struct sysctlnode **)&node,
0, CTLTYPE_NODE,
"obsled",
NULL,
NULL, 0, NULL, 0,
CTL_HW, CTL_CREATE, CTL_EOL);
if (err != 0)
return;
node_mib = node->sysctl_num;
err = sysctl_createv(NULL, 0,
NULL, (const struct sysctlnode **)&node,
CTLFLAG_READWRITE, CTLTYPE_INT,
led_name,
SYSCTL_DESCR("OpenBlockS LED state (0=off, 1=on)"),
obsled_sysctl_verify, 0, (void *)sc, 0,
CTL_HW, node_mib, CTL_CREATE, CTL_EOL);
if (err != 0)
return;
sc->sc_led_state_mib = node->sysctl_num;
#if 0
{
gpio_tag_t tag = sc->sc_tag;
(*(tag)->io_or_write)((tag)->cookie, sc->sc_addr, 0);
}
#endif
}
static int
overlay_modcmd(modcmd_t cmd, void *arg)
{
int error;
switch (cmd) {
case MODULE_CMD_INIT:
error = vfs_attach(&overlay_vfsops);
if (error != 0)
break;
sysctl_createv(&overlay_sysctl_log, 0, NULL, NULL,
CTLFLAG_PERMANENT, CTLTYPE_NODE, "overlay",
SYSCTL_DESCR("Overlay file system"),
NULL, 0, NULL, 0,
CTL_VFS, CTL_CREATE, CTL_EOL);
break;
case MODULE_CMD_FINI:
error = vfs_detach(&overlay_vfsops);
if (error != 0)
break;
sysctl_teardown(&overlay_sysctl_log);
break;
default:
error = ENOTTY;
break;
}
return (error);
}
static int
union_modcmd(modcmd_t cmd, void *arg)
{
int error;
switch (cmd) {
case MODULE_CMD_INIT:
error = vfs_attach(&union_vfsops);
if (error != 0)
break;
sysctl_createv(&union_sysctl_log, 0, NULL, NULL,
CTLFLAG_PERMANENT,
CTLTYPE_NODE, "union",
SYSCTL_DESCR("Union file system"),
NULL, 0, NULL, 0,
CTL_VFS, 15, CTL_EOL);
/*
* XXX the "15" above could be dynamic, thereby eliminating
* one more instance of the "number to vfs" mapping problem,
* but "15" is the order as taken from sys/mount.h
*/
break;
case MODULE_CMD_FINI:
error = vfs_detach(&union_vfsops);
if (error != 0)
break;
sysctl_teardown(&union_sysctl_log);
break;
default:
error = ENOTTY;
break;
}
return (error);
}
/*
* Initialize clock frequencies and start both clocks running.
*/
void
initclocks(void)
{
static struct sysctllog *clog;
int i;
/*
* Set divisors to 1 (normal case) and let the machine-specific
* code do its bit.
*/
psdiv = 1;
/*
* provide minimum default time counter
* will only run at interrupt resolution
*/
intr_timecounter.tc_frequency = hz;
tc_init(&intr_timecounter);
cpu_initclocks();
/*
* Compute profhz and stathz, fix profhz if needed.
*/
i = stathz ? stathz : hz;
if (profhz == 0)
profhz = i;
psratio = profhz / i;
if (schedhz == 0) {
/* 16Hz is best */
hardscheddiv = hz / 16;
if (hardscheddiv <= 0)
panic("hardscheddiv");
}
sysctl_createv(&clog, 0, NULL, NULL,
CTLFLAG_PERMANENT,
CTLTYPE_STRUCT, "clockrate",
SYSCTL_DESCR("Kernel clock rates"),
sysctl_kern_clockrate, 0, NULL,
sizeof(struct clockinfo),
CTL_KERN, KERN_CLOCKRATE, CTL_EOL);
sysctl_createv(&clog, 0, NULL, NULL,
CTLFLAG_PERMANENT,
CTLTYPE_INT, "hardclock_ticks",
SYSCTL_DESCR("Number of hardclock ticks"),
NULL, 0, &hardclock_ticks, sizeof(hardclock_ticks),
CTL_KERN, KERN_HARDCLOCK_TICKS, CTL_EOL);
}
static void
sysctl_vfs_syncfs_setup(struct sysctllog **clog)
{
const struct sysctlnode *rnode, *cnode;
sysctl_createv(clog, 0, NULL, &rnode,
CTLFLAG_PERMANENT,
CTLTYPE_NODE, "vfs", NULL,
NULL, 0, NULL, 0,
CTL_VFS, CTL_EOL);
sysctl_createv(clog, 0, &rnode, &rnode,
CTLFLAG_PERMANENT,
CTLTYPE_NODE, "sync",
SYSCTL_DESCR("syncer options"),
NULL, 0, NULL, 0,
CTL_CREATE, CTL_EOL);
sysctl_createv(clog, 0, &rnode, &cnode,
CTLFLAG_PERMANENT|CTLFLAG_READWRITE,
CTLTYPE_QUAD, "delay",
SYSCTL_DESCR("max time to delay syncing data"),
NULL, 0, &syncdelay, 0,
CTL_CREATE, CTL_EOL);
sysctl_createv(clog, 0, &rnode, &cnode,
CTLFLAG_PERMANENT|CTLFLAG_READWRITE,
CTLTYPE_QUAD, "filedelay",
SYSCTL_DESCR("time to delay syncing files"),
NULL, 0, &filedelay, 0,
CTL_CREATE, CTL_EOL);
sysctl_createv(clog, 0, &rnode, &cnode,
CTLFLAG_PERMANENT|CTLFLAG_READWRITE,
CTLTYPE_QUAD, "dirdelay",
SYSCTL_DESCR("time to delay syncing directories"),
NULL, 0, &dirdelay, 0,
CTL_CREATE, CTL_EOL);
sysctl_createv(clog, 0, &rnode, &cnode,
CTLFLAG_PERMANENT|CTLFLAG_READWRITE,
CTLTYPE_QUAD, "metadelay",
SYSCTL_DESCR("time to delay syncing metadata"),
NULL, 0, &metadelay, 0,
CTL_CREATE, CTL_EOL);
}
static int
smbfs_modcmd(modcmd_t cmd, void *arg)
{
const struct sysctlnode *smb = NULL;
int error;
switch (cmd) {
case MODULE_CMD_INIT:
error = vfs_attach(&smbfs_vfsops);
if (error != 0)
break;
sysctl_createv(&smbfs_sysctl_log, 0, NULL, NULL,
CTLFLAG_PERMANENT,
CTLTYPE_NODE, "vfs", NULL,
NULL, 0, NULL, 0,
CTL_VFS, CTL_EOL);
sysctl_createv(&smbfs_sysctl_log, 0, NULL, &smb,
CTLFLAG_PERMANENT,
CTLTYPE_NODE, "samba",
SYSCTL_DESCR("SMB/CIFS remote file system"),
NULL, 0, NULL, 0,
CTL_VFS, CTL_CREATE, CTL_EOL);
if (smb != NULL) {
sysctl_createv(&smbfs_sysctl_log, 0, &smb, NULL,
CTLFLAG_PERMANENT|CTLFLAG_IMMEDIATE,
CTLTYPE_INT, "version",
SYSCTL_DESCR("smbfs version"),
NULL, SMBFS_VERSION, NULL, 0,
CTL_CREATE, CTL_EOL);
}
break;
case MODULE_CMD_FINI:
error = vfs_detach(&smbfs_vfsops);
if (error != 0)
break;
sysctl_teardown(&smbfs_sysctl_log);
break;
default:
error = ENOTTY;
break;
}
return (error);
}
/*
* Setup sysctl(3) MIB, net.ieee80211.*
*
* TBD condition CTLFLAG_PERMANENT on being a module or not
*/
void
ieee80211_rssadapt_sysctl_setup(struct sysctllog **clog)
{
int rc;
const struct sysctlnode *node;
if ((rc = sysctl_createv(clog, 0, NULL, &node,
CTLFLAG_PERMANENT, CTLTYPE_NODE, "link", NULL,
NULL, 0, NULL, 0, CTL_NET, PF_LINK, CTL_EOL)) != 0)
goto err;
if ((rc = sysctl_createv(clog, 0, &node, &node,
CTLFLAG_PERMANENT, CTLTYPE_NODE, "ieee80211", NULL,
NULL, 0, NULL, 0, CTL_CREATE, CTL_EOL)) != 0)
goto err;
if ((rc = sysctl_createv(clog, 0, &node, &node,
CTLFLAG_PERMANENT, CTLTYPE_NODE, "rssadapt",
SYSCTL_DESCR("Received Signal Strength adaptation controls"),
NULL, 0, NULL, 0, CTL_CREATE, CTL_EOL)) != 0)
goto err;
#ifdef IEEE80211_DEBUG
/* control debugging printfs */
if ((rc = sysctl_createv(clog, 0, &node, NULL,
CTLFLAG_PERMANENT|CTLFLAG_READWRITE, CTLTYPE_INT, "debug",
SYSCTL_DESCR("Enable RSS adaptation debugging output"),
sysctl_ieee80211_rssadapt_debug, 0, &ieee80211_rssadapt_debug, 0,
CTL_CREATE, CTL_EOL)) != 0)
goto err;
#endif /* IEEE80211_DEBUG */
/* control rate of decay for exponential averages */
if ((rc = sysctl_createv(clog, 0, &node, NULL,
CTLFLAG_PERMANENT|CTLFLAG_READWRITE, CTLTYPE_STRUCT,
"expavgctl", SYSCTL_DESCR("RSS exponential averaging control"),
sysctl_ieee80211_rssadapt_expavgctl, 0,
&master_expavgctl, sizeof(master_expavgctl), CTL_CREATE,
CTL_EOL)) != 0)
goto err;
return;
err:
printf("%s: sysctl_createv failed (rc = %d)\n", __func__, rc);
}
static int
cd9660_modcmd(modcmd_t cmd, void *arg)
{
int error;
switch (cmd) {
case MODULE_CMD_INIT:
error = vfs_attach(&cd9660_vfsops);
if (error != 0)
break;
sysctl_createv(&cd9660_sysctl_log, 0, NULL, NULL,
CTLFLAG_PERMANENT, CTLTYPE_NODE, "vfs", NULL,
NULL, 0, NULL, 0,
CTL_VFS, CTL_EOL);
sysctl_createv(&cd9660_sysctl_log, 0, NULL, NULL,
CTLFLAG_PERMANENT, CTLTYPE_NODE, "cd9660",
SYSCTL_DESCR("ISO-9660 file system"),
NULL, 0, NULL, 0,
CTL_VFS, 14, CTL_EOL);
sysctl_createv(&cd9660_sysctl_log, 0, NULL, NULL,
CTLFLAG_PERMANENT|CTLFLAG_READWRITE,
CTLTYPE_INT, "utf8_joliet",
SYSCTL_DESCR("Encode Joliet filenames to UTF-8"),
NULL, 0, &cd9660_utf8_joliet, 0,
CTL_VFS, 14, CD9660_UTF8_JOLIET, CTL_EOL);
/*
* XXX the "14" above could be dynamic, thereby eliminating
* one more instance of the "number to vfs" mapping problem,
* but "14" is the order as taken from sys/mount.h
*/
break;
case MODULE_CMD_FINI:
error = vfs_detach(&cd9660_vfsops);
if (error != 0)
break;
sysctl_teardown(&cd9660_sysctl_log);
break;
default:
error = ENOTTY;
break;
}
return (error);
}
/*
* Top level filesystem related information gathering.
*/
void
compat_sysctl_vfs(struct sysctllog **clog)
{
extern int nmountcompatnames;
sysctl_createv(clog, 0, NULL, NULL,
CTLFLAG_PERMANENT|CTLFLAG_IMMEDIATE,
CTLTYPE_INT, "maxtypenum",
SYSCTL_DESCR("Highest valid filesystem type number"),
NULL, nmountcompatnames, NULL, 0,
CTL_VFS, VFS_GENERIC, VFS_MAXTYPENUM, CTL_EOL);
sysctl_createv(clog, 0, NULL, NULL,
CTLFLAG_PERMANENT,
CTLTYPE_STRUCT, "conf",
SYSCTL_DESCR("Filesystem configuration information"),
sysctl_vfs_generic_conf, 0, NULL,
sizeof(struct vfsconf),
CTL_VFS, VFS_GENERIC, VFS_CONF, CTL_EOL);
}
void
cprng_init(void)
{
static struct sysctllog *random_sysctllog;
nist_ctr_initialize();
sysctl_createv(&random_sysctllog, 0, NULL, NULL,
CTLFLAG_PERMANENT,
CTLTYPE_INT, "urandom",
SYSCTL_DESCR("Random integer value"),
sysctl_kern_urnd, 0, NULL, 0,
CTL_KERN, KERN_URND, CTL_EOL);
sysctl_createv(&random_sysctllog, 0, NULL, NULL,
CTLFLAG_PERMANENT,
CTLTYPE_INT, "arandom",
SYSCTL_DESCR("n bytes of random data"),
sysctl_kern_arnd, 0, NULL, 0,
CTL_KERN, KERN_ARND, CTL_EOL);
}
void
drm_sysctl_init(struct drm_sysctl_def *def)
{
const void * const *b = def->bp, * const *e = def->ep;
const struct sysctlnode *rnode = NULL, *cnode;
const char *name = "drm2";
int error;
if ((error = sysctl_createv(&def->log, 0, NULL, &rnode,
CTLFLAG_PERMANENT, CTLTYPE_NODE, name,
SYSCTL_DESCR("DRM driver parameters"),
NULL, 0, NULL, 0, CTL_HW, CTL_CREATE, CTL_EOL)) != 0) {
aprint_error("sysctl_createv returned %d, "
"for %s ignoring\n", error, name);
return;
}
for (; b < e; b++) {
const struct linux_module_param_info *p = *b;
char copy[256], *n, *nn;
strlcpy(copy, p->name, sizeof(copy));
cnode = rnode;
for (n = copy; (nn = strchr(n, '.')) != NULL; n = nn) {
*nn++ = '\0';
if ((error = drm_sysctl_node(n, &cnode, &def->log))
!= 0) {
aprint_error("sysctl_createv returned %d, "
"for %s ignoring\n", error, n);
continue;
}
}
if ((error = sysctl_createv(&def->log, 0, &cnode,
&cnode, p->mode == 0600 ? CTLFLAG_READWRITE : 0,
drm_sysctl_get_type(p), n,
SYSCTL_DESCR(drm_sysctl_get_description(p, def)),
NULL, 0, p->ptr, 0, CTL_CREATE, CTL_EOL)) != 0)
aprint_error("sysctl_createv returned %d, "
"for %s ignoring\n", error, n);
}
}
static ACPI_STATUS
sony_walk_cb(ACPI_HANDLE hnd, UINT32 v, void *context, void **status)
{
struct sony_acpi_softc *sc = (void *)context;
const struct sysctlnode *node, *snode;
const char *name = acpi_name(hnd);
ACPI_INTEGER acpi_val;
char buf[SYSCTL_NAMELEN + 1], *ptr;
int rv;
if ((name = strrchr(name, '.')) == NULL)
return AE_OK;
name++;
if ((*name != 'G') && (*name != 'S'))
return AE_OK;
(void)strlcpy(buf, name, sizeof(buf));
*buf = 'G';
/*
* We assume that if the 'get' of the name as an integer is
* successful it is ok.
*/
if (acpi_eval_integer(sc->sc_node->ad_handle, buf, &acpi_val))
return AE_OK;
for (ptr = buf; *ptr; ptr++)
*ptr = tolower(*ptr);
if ((rv = sysctl_createv(&sc->sc_log, 0, NULL, &node, CTLFLAG_PERMANENT,
CTLTYPE_NODE, "hw", NULL, NULL, 0, NULL, 0, CTL_HW, CTL_EOL)) != 0)
goto out;
if ((rv = sysctl_createv(&sc->sc_log, 0, &node, &snode, 0,
CTLTYPE_NODE, device_xname(sc->sc_dev),
SYSCTL_DESCR("sony controls"),
NULL, 0, NULL, 0, CTL_CREATE, CTL_EOL)) != 0)
goto out;
if ((rv = sysctl_createv(&sc->sc_log, 0, &snode, &node,
CTLFLAG_READWRITE, CTLTYPE_INT, buf + 1, NULL,
sony_sysctl_helper, 0, sc, 0, CTL_CREATE, CTL_EOL)) != 0)
goto out;
out:
#ifdef DIAGNOSTIC
if (rv)
printf("%s: sysctl_createv failed (rv = %d)\n",
device_xname(sc->sc_dev), rv);
#endif
return AE_OK;
}
static void
asus_sysctl_setup(struct asus_softc *sc)
{
const struct sysctlnode *node, *node_cfv, *node_ncfv;
int err, node_mib;
if (sc->sc_cfvnum == 0)
return;
err = sysctl_createv(&sc->sc_log, 0, NULL, &node, 0,
CTLTYPE_NODE, device_xname(sc->sc_dev), NULL, NULL, 0,
NULL, 0, CTL_HW, CTL_CREATE, CTL_EOL);
if (err)
goto sysctl_err;
node_mib = node->sysctl_num;
err = sysctl_createv(&sc->sc_log, 0, NULL, &node_ncfv,
CTLFLAG_READONLY, CTLTYPE_QUAD, "ncfv",
SYSCTL_DESCR("Number of CPU frequency/voltage modes"),
NULL, 0, &sc->sc_cfvnum, 0,
CTL_HW, node_mib, CTL_CREATE, CTL_EOL);
if (err)
goto sysctl_err;
sc->sc_cfvnum_mib = node_ncfv->sysctl_num;
err = sysctl_createv(&sc->sc_log, 0, NULL, &node_cfv,
CTLFLAG_READWRITE, CTLTYPE_INT, "cfv",
SYSCTL_DESCR("Current CPU frequency/voltage mode"),
asus_sysctl_verify, 0, (void *)sc, 0,
CTL_HW, node_mib, CTL_CREATE, CTL_EOL);
if (err)
goto sysctl_err;
sc->sc_cfv_mib = node_cfv->sysctl_num;
return;
sysctl_err:
aprint_error_dev(sc->sc_dev, "failed to add sysctl nodes. (%d)\n", err);
}
static void
xbseeprom_attach(device_t parent, device_t self, void *opaque)
{
struct xbseeprom_softc *sc = device_private(self);
struct i2c_attach_args *ia = opaque;
uint8_t *ptr;
int i;
sc->sc_dev = self;
sc->sc_tag = ia->ia_tag;
sc->sc_addr = ia->ia_addr;
sc->sc_data = kmem_alloc(XBSEEPROM_SIZE, KM_SLEEP);
if (sc->sc_data == NULL) {
aprint_error(": Not enough memory to copy EEPROM\n");
return;
}
aprint_normal(": Xbox Serial EEPROM\n");
/* Read in EEPROM contents */
ptr = (uint8_t *)sc->sc_data;
for (i = 0; i < XBSEEPROM_SIZE; i++, ptr++)
xbseeprom_read_1(sc, i, ptr);
#if 0
/* Display some interesting information */
aprint_normal_dev(self, "MAC address %02x:%02x:%02x:%02x:%02x:%02x\n",
sc->sc_data->MACAddress[0], sc->sc_data->MACAddress[1],
sc->sc_data->MACAddress[2], sc->sc_data->MACAddress[3],
sc->sc_data->MACAddress[4], sc->sc_data->MACAddress[5]
);
#endif
/* Setup sysctl subtree */
memset(xbseeprom_serial, 0, sizeof(xbseeprom_serial));
memcpy(xbseeprom_serial, sc->sc_data->SerialNumber, 16);
sysctl_createv(NULL, 0, NULL, NULL,
0, CTLTYPE_STRING, "xbox_serial",
SYSCTL_DESCR("Xbox serial number"),
NULL, 0, &xbseeprom_serial, 0,
CTL_MACHDEP, CTL_CREATE, CTL_EOL);
return;
}
static void
ufsdirhash_sysctl_init(void)
{
const struct sysctlnode *rnode, *cnode;
sysctl_createv(&ufsdirhash_sysctl_log, 0, NULL, &rnode,
CTLFLAG_PERMANENT,
CTLTYPE_NODE, "vfs", NULL,
NULL, 0, NULL, 0,
CTL_VFS, CTL_EOL);
sysctl_createv(&ufsdirhash_sysctl_log, 0, &rnode, &rnode,
CTLFLAG_PERMANENT,
CTLTYPE_NODE, "ufs",
SYSCTL_DESCR("ufs"),
NULL, 0, NULL, 0,
CTL_CREATE, CTL_EOL);
sysctl_createv(&ufsdirhash_sysctl_log, 0, &rnode, &rnode,
CTLFLAG_PERMANENT,
CTLTYPE_NODE, "dirhash",
SYSCTL_DESCR("dirhash"),
NULL, 0, NULL, 0,
CTL_CREATE, CTL_EOL);
sysctl_createv(&ufsdirhash_sysctl_log, 0, &rnode, &cnode,
CTLFLAG_PERMANENT|CTLFLAG_READWRITE,
CTLTYPE_INT, "minblocks",
SYSCTL_DESCR("minimum hashed directory size in blocks"),
NULL, 0, &ufs_dirhashminblks, 0,
CTL_CREATE, CTL_EOL);
sysctl_createv(&ufsdirhash_sysctl_log, 0, &rnode, &cnode,
CTLFLAG_PERMANENT|CTLFLAG_READWRITE,
CTLTYPE_INT, "maxmem",
SYSCTL_DESCR("maximum dirhash memory usage"),
NULL, 0, &ufs_dirhashmaxmem, 0,
CTL_CREATE, CTL_EOL);
sysctl_createv(&ufsdirhash_sysctl_log, 0, &rnode, &cnode,
CTLFLAG_PERMANENT|CTLFLAG_READONLY,
CTLTYPE_INT, "memused",
SYSCTL_DESCR("current dirhash memory usage"),
NULL, 0, &ufs_dirhashmem, 0,
CTL_CREATE, CTL_EOL);
sysctl_createv(&ufsdirhash_sysctl_log, 0, &rnode, &cnode,
CTLFLAG_PERMANENT|CTLFLAG_READWRITE,
CTLTYPE_INT, "docheck",
SYSCTL_DESCR("enable extra sanity checks"),
NULL, 0, &ufs_dirhashcheck, 0,
CTL_CREATE, CTL_EOL);
}
static int
procfs_modcmd(modcmd_t cmd, void *arg)
{
int error;
switch (cmd) {
case MODULE_CMD_INIT:
error = vfs_attach(&procfs_vfsops);
if (error != 0)
break;
sysctl_createv(&procfs_sysctl_log, 0, NULL, NULL,
CTLFLAG_PERMANENT,
CTLTYPE_NODE, "vfs", NULL,
NULL, 0, NULL, 0,
CTL_VFS, CTL_EOL);
sysctl_createv(&procfs_sysctl_log, 0, NULL, NULL,
CTLFLAG_PERMANENT,
CTLTYPE_NODE, "procfs",
SYSCTL_DESCR("Process file system"),
NULL, 0, NULL, 0,
CTL_VFS, 12, CTL_EOL);
/*
* XXX the "12" above could be dynamic, thereby eliminating
* one more instance of the "number to vfs" mapping problem,
* but "12" is the order as taken from sys/mount.h
*/
procfs_listener = kauth_listen_scope(KAUTH_SCOPE_PROCESS,
procfs_listener_cb, NULL);
break;
case MODULE_CMD_FINI:
error = vfs_detach(&procfs_vfsops);
if (error != 0)
break;
sysctl_teardown(&procfs_sysctl_log);
kauth_unlisten_scope(procfs_listener);
break;
default:
error = ENOTTY;
break;
}
return (error);
}
static int
mfs_modcmd(modcmd_t cmd, void *arg)
{
int error;
switch (cmd) {
case MODULE_CMD_INIT:
error = vfs_attach(&mfs_vfsops);
if (error != 0)
break;
sysctl_createv(&mfs_sysctl_log, 0, NULL, NULL,
CTLFLAG_PERMANENT,
CTLTYPE_NODE, "vfs", NULL,
NULL, 0, NULL, 0,
CTL_VFS, CTL_EOL);
sysctl_createv(&mfs_sysctl_log, 0, NULL, NULL,
CTLFLAG_PERMANENT|CTLFLAG_ALIAS,
CTLTYPE_NODE, "mfs",
SYSCTL_DESCR("Memory based file system"),
NULL, 1, NULL, 0,
CTL_VFS, 3, CTL_EOL);
/*
* XXX the "1" and the "3" above could be dynamic, thereby
* eliminating one more instance of the "number to vfs"
* mapping problem, but they are in order as taken from
* sys/mount.h
*/
break;
case MODULE_CMD_FINI:
error = vfs_detach(&mfs_vfsops);
if (error != 0)
break;
sysctl_teardown(&mfs_sysctl_log);
break;
default:
error = ENOTTY;
break;
}
return (error);
}
static int
vmt_sysctl_setup_clock_sync(device_t self, const struct sysctlnode *root_node)
{
const struct sysctlnode *node, *period_node;
struct vmt_softc *sc = device_private(self);
int rv;
rv = sysctl_createv(&sc->sc_log, 0, &root_node, &node,
0, CTLTYPE_NODE, "clock_sync", NULL,
NULL, 0, NULL, 0, CTL_CREATE, CTL_EOL);
if (rv != 0)
return rv;
rv = sysctl_createv(&sc->sc_log, 0, &node, &period_node,
CTLFLAG_READWRITE, CTLTYPE_INT, "period",
SYSCTL_DESCR("Period, in seconds, at which to update the "
"guest's clock"),
vmt_sysctl_update_clock_sync_period, 0, (void *)sc, 0,
CTL_CREATE, CTL_EOL);
return rv;
}
static int
ext2fs_modcmd(modcmd_t cmd, void *arg)
{
// printf("In file: %s, fun: %s,lineno: %d\n",__FILE__, __func__, __LINE__);
int error;
switch (cmd) {
case MODULE_CMD_INIT:
error = vfs_attach(&ext2fs_vfsops);
if (error != 0)
break;
sysctl_createv(&ext2fs_sysctl_log, 0, NULL, NULL,
CTLFLAG_PERMANENT,
CTLTYPE_NODE, "ext2fs",
SYSCTL_DESCR("Linux EXT2FS file system"),
NULL, 0, NULL, 0,
CTL_VFS, 17, CTL_EOL);
/*
* XXX the "17" above could be dynamic, thereby eliminating
* one more instance of the "number to vfs" mapping problem,
* but "17" is the order as taken from sys/mount.h
*/
break;
case MODULE_CMD_FINI:
error = vfs_detach(&ext2fs_vfsops);
if (error != 0)
break;
sysctl_teardown(&ext2fs_sysctl_log);
break;
default:
error = ENOTTY;
break;
}
return (error);
}
void
sysctl_security_overlay_setup(struct sysctllog **clog)
{
const struct sysctlnode *rnode;
sysctl_createv(clog, 0, NULL, &rnode,
CTLFLAG_PERMANENT,
CTLTYPE_NODE, "models", NULL,
NULL, 0, NULL, 0,
CTL_SECURITY, CTL_CREATE, CTL_EOL);
sysctl_createv(clog, 0, &rnode, &rnode,
CTLFLAG_PERMANENT,
CTLTYPE_NODE, "overlay",
SYSCTL_DESCR("Overlay security model on-top of bsd44"),
NULL, 0, NULL, 0,
CTL_CREATE, CTL_EOL);
sysctl_createv(clog, 0, &rnode, NULL,
CTLFLAG_PERMANENT,
CTLTYPE_STRING, "name", NULL,
NULL, 0, __UNCONST(SECMODEL_OVERLAY_NAME), 0,
CTL_CREATE, CTL_EOL);
}
/*
* Attach a supported board.
*
* XXX This doesn't fail gracefully.
*/
static void
twe_attach(device_t parent, device_t self, void *aux)
{
struct pci_attach_args *pa;
struct twe_softc *sc;
pci_chipset_tag_t pc;
pci_intr_handle_t ih;
pcireg_t csr;
const char *intrstr;
int s, size, i, rv, rseg;
size_t max_segs, max_xfer;
bus_dma_segment_t seg;
const struct sysctlnode *node;
struct twe_cmd *tc;
struct twe_ccb *ccb;
sc = device_private(self);
sc->sc_dev = self;
pa = aux;
pc = pa->pa_pc;
sc->sc_dmat = pa->pa_dmat;
SIMPLEQ_INIT(&sc->sc_ccb_queue);
SLIST_INIT(&sc->sc_ccb_freelist);
aprint_naive(": RAID controller\n");
aprint_normal(": 3ware Escalade\n");
if (pci_mapreg_map(pa, PCI_CBIO, PCI_MAPREG_TYPE_IO, 0,
&sc->sc_iot, &sc->sc_ioh, NULL, NULL)) {
aprint_error_dev(self, "can't map i/o space\n");
return;
}
/* Enable the device. */
csr = pci_conf_read(pa->pa_pc, pa->pa_tag, PCI_COMMAND_STATUS_REG);
pci_conf_write(pa->pa_pc, pa->pa_tag, PCI_COMMAND_STATUS_REG,
csr | PCI_COMMAND_MASTER_ENABLE);
/* Map and establish the interrupt. */
if (pci_intr_map(pa, &ih)) {
aprint_error_dev(self, "can't map interrupt\n");
return;
}
intrstr = pci_intr_string(pc, ih);
sc->sc_ih = pci_intr_establish(pc, ih, IPL_BIO, twe_intr, sc);
if (sc->sc_ih == NULL) {
aprint_error_dev(self, "can't establish interrupt%s%s\n",
(intrstr) ? " at " : "",
(intrstr) ? intrstr : "");
return;
}
if (intrstr != NULL)
aprint_normal_dev(self, "interrupting at %s\n",
intrstr);
/*
* Allocate and initialise the command blocks and CCBs.
*/
size = sizeof(struct twe_cmd) * TWE_MAX_QUEUECNT;
if ((rv = bus_dmamem_alloc(sc->sc_dmat, size, PAGE_SIZE, 0, &seg, 1,
&rseg, BUS_DMA_NOWAIT)) != 0) {
aprint_error_dev(self, "unable to allocate commands, rv = %d\n", rv);
return;
}
if ((rv = bus_dmamem_map(sc->sc_dmat, &seg, rseg, size,
(void **)&sc->sc_cmds,
BUS_DMA_NOWAIT | BUS_DMA_COHERENT)) != 0) {
aprint_error_dev(self, "unable to map commands, rv = %d\n", rv);
return;
}
if ((rv = bus_dmamap_create(sc->sc_dmat, size, size, 1, 0,
BUS_DMA_NOWAIT, &sc->sc_dmamap)) != 0) {
aprint_error_dev(self, "unable to create command DMA map, rv = %d\n", rv);
return;
}
if ((rv = bus_dmamap_load(sc->sc_dmat, sc->sc_dmamap, sc->sc_cmds,
size, NULL, BUS_DMA_NOWAIT)) != 0) {
aprint_error_dev(self, "unable to load command DMA map, rv = %d\n", rv);
return;
}
ccb = malloc(sizeof(*ccb) * TWE_MAX_QUEUECNT, M_DEVBUF, M_NOWAIT);
if (ccb == NULL) {
aprint_error_dev(self, "unable to allocate memory for ccbs\n");
return;
}
sc->sc_cmds_paddr = sc->sc_dmamap->dm_segs[0].ds_addr;
memset(sc->sc_cmds, 0, size);
sc->sc_ccbs = ccb;
tc = (struct twe_cmd *)sc->sc_cmds;
max_segs = twe_get_maxsegs();
max_xfer = twe_get_maxxfer(max_segs);
for (i = 0; i < TWE_MAX_QUEUECNT; i++, tc++, ccb++) {
ccb->ccb_cmd = tc;
ccb->ccb_cmdid = i;
ccb->ccb_flags = 0;
rv = bus_dmamap_create(sc->sc_dmat, max_xfer,
max_segs, PAGE_SIZE, 0,
BUS_DMA_NOWAIT | BUS_DMA_ALLOCNOW,
&ccb->ccb_dmamap_xfer);
if (rv != 0) {
aprint_error_dev(self, "can't create dmamap, rv = %d\n", rv);
return;
}
/* Save the first CCB for AEN retrieval. */
if (i != 0)
SLIST_INSERT_HEAD(&sc->sc_ccb_freelist, ccb,
ccb_chain.slist);
}
/* Wait for the controller to become ready. */
if (twe_status_wait(sc, TWE_STS_MICROCONTROLLER_READY, 6)) {
aprint_error_dev(self, "microcontroller not ready\n");
return;
}
twe_outl(sc, TWE_REG_CTL, TWE_CTL_DISABLE_INTRS);
/* Reset the controller. */
s = splbio();
rv = twe_reset(sc);
splx(s);
if (rv) {
aprint_error_dev(self, "reset failed\n");
return;
}
/* Initialise connection with controller. */
twe_init_connection(sc);
twe_describe_controller(sc);
/* Find and attach RAID array units. */
sc->sc_nunits = 0;
for (i = 0; i < TWE_MAX_UNITS; i++)
(void) twe_add_unit(sc, i);
/* ...and finally, enable interrupts. */
twe_outl(sc, TWE_REG_CTL, TWE_CTL_CLEAR_ATTN_INTR |
TWE_CTL_UNMASK_RESP_INTR |
TWE_CTL_ENABLE_INTRS);
/* sysctl set-up for 3ware cli */
if (sysctl_createv(NULL, 0, NULL, NULL,
CTLFLAG_PERMANENT, CTLTYPE_NODE, "hw",
NULL, NULL, 0, NULL, 0,
CTL_HW, CTL_EOL) != 0) {
aprint_error_dev(self, "could not create %s sysctl node\n",
"hw");
return;
}
if (sysctl_createv(NULL, 0, NULL, &node,
0, CTLTYPE_NODE, device_xname(self),
SYSCTL_DESCR("twe driver information"),
NULL, 0, NULL, 0,
CTL_HW, CTL_CREATE, CTL_EOL) != 0) {
aprint_error_dev(self, "could not create %s.%s sysctl node\n",
"hw", device_xname(self));
return;
}
if ((i = sysctl_createv(NULL, 0, NULL, NULL,
0, CTLTYPE_STRING, "driver_version",
SYSCTL_DESCR("twe0 driver version"),
NULL, 0, __UNCONST(&twever), 0,
CTL_HW, node->sysctl_num, CTL_CREATE, CTL_EOL))
!= 0) {
aprint_error_dev(self, "could not create %s.%s.driver_version sysctl\n",
"hw", device_xname(self));
return;
}
}
SYSCTL_SETUP(sysctl_security_keylock_setup,
"sysctl security keylock setup")
{
const struct sysctlnode *rnode;
sysctl_createv(clog, 0, NULL, &rnode,
CTLFLAG_PERMANENT,
CTLTYPE_NODE, "models", NULL,
NULL, 0, NULL, 0,
CTL_SECURITY, CTL_CREATE, CTL_EOL);
sysctl_createv(clog, 0, &rnode, &rnode,
CTLFLAG_PERMANENT,
CTLTYPE_NODE, "keylock",
SYSCTL_DESCR("Keylock security model"),
NULL, 0, NULL, 0,
CTL_CREATE, CTL_EOL);
sysctl_createv(clog, 0, &rnode, NULL,
CTLFLAG_PERMANENT,
CTLTYPE_STRING, "name", NULL,
NULL, 0, __UNCONST("Keylock"), 0,
CTL_CREATE, CTL_EOL);
}
void
secmodel_keylock_init(void)
{
int error = secmodel_register(&keylock_sm,
"org.netbsd.secmodel.keylock",
newsize = seminfo.semmnu;
error = sysctl_lookup(SYSCTLFN_CALL(&node));
if (error || newp == NULL)
return error;
return semrealloc(seminfo.semmni, seminfo.semmns, newsize);
}
SYSCTL_SETUP(sysctl_ipc_sem_setup, "sysctl kern.ipc subtree setup")
{
const struct sysctlnode *node = NULL;
sysctl_createv(clog, 0, NULL, &node,
CTLFLAG_PERMANENT,
CTLTYPE_NODE, "ipc",
SYSCTL_DESCR("SysV IPC options"),
NULL, 0, NULL, 0,
CTL_KERN, KERN_SYSVIPC, CTL_EOL);
if (node == NULL)
return;
sysctl_createv(clog, 0, &node, NULL,
CTLFLAG_PERMANENT | CTLFLAG_READWRITE,
CTLTYPE_INT, "semmni",
SYSCTL_DESCR("Max number of number of semaphore identifiers"),
sysctl_ipc_semmni, 0, &seminfo.semmni, 0,
CTL_CREATE, CTL_EOL);
sysctl_createv(clog, 0, &node, NULL,
CTLFLAG_PERMANENT | CTLFLAG_READWRITE,
CTLTYPE_INT, "semmns",
#include <sys/cdefs.h>
__KERNEL_RCSID(0, "$NetBSD: init_sysctl_base.c,v 1.1 2009/09/16 15:03:56 pooka Exp $");
#include <sys/param.h>
#include <sys/sysctl.h>
/*
* sets up the base nodes...
*/
SYSCTL_SETUP(sysctl_root_setup, "sysctl base setup")
{
sysctl_createv(clog, 0, NULL, NULL,
CTLFLAG_PERMANENT,
CTLTYPE_NODE, "kern",
SYSCTL_DESCR("High kernel"),
NULL, 0, NULL, 0,
CTL_KERN, CTL_EOL);
sysctl_createv(clog, 0, NULL, NULL,
CTLFLAG_PERMANENT,
CTLTYPE_NODE, "vm",
SYSCTL_DESCR("Virtual memory"),
NULL, 0, NULL, 0,
CTL_VM, CTL_EOL);
sysctl_createv(clog, 0, NULL, NULL,
CTLFLAG_PERMANENT,
CTLTYPE_NODE, "vfs",
SYSCTL_DESCR("Filesystem"),
NULL, 0, NULL, 0,
CTL_VFS, CTL_EOL);
sysctl_createv(clog, 0, NULL, NULL,
return (0);
}
SYSCTL_SETUP(sysctl_kern_gprof_setup, "sysctl kern.profiling subtree setup")
{
sysctl_createv(clog, 0, NULL, NULL,
CTLFLAG_PERMANENT,
CTLTYPE_NODE, "kern", NULL,
NULL, 0, NULL, 0,
CTL_KERN, CTL_EOL);
sysctl_createv(clog, 0, NULL, NULL,
CTLFLAG_PERMANENT,
CTLTYPE_NODE, "profiling",
SYSCTL_DESCR("Profiling information (available)"),
NULL, 0, NULL, 0,
CTL_KERN, KERN_PROF, CTL_EOL);
sysctl_createv(clog, 0, NULL, NULL,
CTLFLAG_PERMANENT|CTLFLAG_READWRITE,
CTLTYPE_INT, "state",
SYSCTL_DESCR("Profiling state"),
sysctl_kern_profiling, 0, NULL, 0,
CTL_KERN, KERN_PROF, GPROF_STATE, CTL_EOL);
sysctl_createv(clog, 0, NULL, NULL,
CTLFLAG_PERMANENT|CTLFLAG_READWRITE,
CTLTYPE_STRUCT, "count",
SYSCTL_DESCR("Array of statistical program counters"),
sysctl_kern_profiling, 0, NULL, 0,
CTL_KERN, KERN_PROF, GPROF_COUNT, CTL_EOL);
SYSCTL_SETUP(sysctl_hw_ubt_debug_setup, "sysctl hw.ubt_debug setup")
{
sysctl_createv(NULL, 0, NULL, NULL,
CTLFLAG_PERMANENT,
CTLTYPE_NODE, "hw",
NULL,
NULL, 0,
NULL, 0,
CTL_HW, CTL_EOL);
sysctl_createv(NULL, 0, NULL, NULL,
CTLFLAG_PERMANENT | CTLFLAG_READWRITE,
CTLTYPE_INT, "ubt_debug",
SYSCTL_DESCR("ubt debug level"),
NULL, 0,
&ubt_debug, sizeof(ubt_debug),
CTL_HW, CTL_CREATE, CTL_EOL);
}
#else
#define DPRINTF(...)
#define DPRINTFN(...)
#endif
/*******************************************************************************
*
* ubt softc structure
*
*/
