示例#1
0
bool wxGenericProgressDialog::Pulse(const wxString& newmsg, bool *skip)
{
    if ( !DoBeforeUpdate(skip) )
        return false;

    wxCHECK_MSG( m_gauge, false, "dialog should be fully created" );

    // show a bit of progress
    m_gauge->Pulse();

    UpdateMessage(newmsg);

    if (m_elapsed || m_remaining || m_estimated)
    {
        unsigned long elapsed = wxGetCurrentTime() - m_timeStart;

        SetTimeLabel(elapsed, m_elapsed);
        SetTimeLabel((unsigned long)-1, m_estimated);
        SetTimeLabel((unsigned long)-1, m_remaining);
    }

    DoAfterUpdate();

    return m_state != Canceled;
}
示例#2
0
bool wxProgressDialog::Pulse(const wxString& newmsg, bool *skip)
{
    if ( !DoBeforeUpdate(skip) )
        return false;

    wxASSERT_MSG( m_gauge, wxT("cannot update non existent dialog") );

    // show a bit of progress
    m_gauge->Pulse();

    UpdateMessage(newmsg);

    if (m_elapsed || m_remaining || m_estimated)
    {
        unsigned long elapsed = wxGetCurrentTime() - m_timeStart;

        SetTimeLabel(elapsed, m_elapsed);
        SetTimeLabel((unsigned long)-1, m_estimated);
        SetTimeLabel((unsigned long)-1, m_remaining);
    }

    DoAfterUpdate();

    return m_state != Canceled;
}
示例#3
0
void CProgressThreadDlg::OnTimer(UINT_PTR nIDEvent)
{
  ASSERT(nIDEvent == m_uTimerID);
  CDialog::OnTimer(nIDEvent);

  // Eat spurious WM_TIMER messages
  MSG msg;
  while(::PeekMessage(&msg, m_hWnd, WM_TIMER, WM_TIMER, PM_REMOVE));

  SetTimeLabel();
}
示例#4
0
wxProgressDialog::wxProgressDialog(wxString const &title,
                                   wxString const &message,
                                   int maximum,
                                   wxWindow *parent,
                                   int style)
                : wxDialog(parent, wxID_ANY, title),
                  m_skip(false),
                  m_delay(3),
                  m_hasAbortButton(false),
                  m_hasSkipButton(false)
{
    // we may disappear at any moment, let the others know about it
    SetExtraStyle(GetExtraStyle() | wxWS_EX_TRANSIENT);
    m_windowStyle |= style;

    m_hasAbortButton = (style & wxPD_CAN_ABORT) != 0;
    m_hasSkipButton = (style & wxPD_CAN_SKIP) != 0;

    bool isPda = (wxSystemSettings::GetScreenType() <= wxSYS_SCREEN_PDA);

#if defined(__WXMSW__) && !defined(__WXUNIVERSAL__)
    // we have to remove the "Close" button from the title bar then as it is
    // confusing to have it - it doesn't work anyhow
    //
    // FIXME: should probably have a (extended?) window style for this
    if ( !m_hasAbortButton )
    {
        EnableCloseButton(false);
    }
#endif // wxMSW

#if defined(__SMARTPHONE__)
    SetLeftMenu();
#endif

    m_state = m_hasAbortButton ? Continue : Uncancelable;
    m_maximum = maximum;

#if defined(__WXMSW__) || defined(__WXPM__)
    // we can't have values > 65,536 in the progress control under Windows, so
    // scale everything down
    m_factor = m_maximum / 65536 + 1;
    m_maximum /= m_factor;
#endif // __WXMSW__

    m_parentTop = wxGetTopLevelParent(parent);

    wxClientDC dc(this);
    dc.SetFont(wxSystemSettings::GetFont(wxSYS_DEFAULT_GUI_FONT));
    long widthText = 0;
    dc.GetTextExtent(message, &widthText, NULL, NULL, NULL, NULL);

    wxBoxSizer *sizer = new wxBoxSizer(wxVERTICAL);

    m_msg = new wxStaticText(this, wxID_ANY, message);
    sizer->Add(m_msg, 0, wxLEFT | wxTOP, 2*LAYOUT_MARGIN);

    wxSize sizeDlg,
           sizeLabel = m_msg->GetSize();
    sizeDlg.y = 2*LAYOUT_MARGIN + sizeLabel.y;

    if ( maximum > 0 )
    {
        int gauge_style = wxGA_HORIZONTAL;
        if ( ( style & wxPD_SMOOTH ) == wxPD_SMOOTH )
            gauge_style |= wxGA_SMOOTH;
        m_gauge = new wxGauge(this, wxID_ANY, m_maximum,
                              wxDefaultPosition, wxDefaultSize,
                              gauge_style );

        sizer->Add(m_gauge, 0, wxLEFT | wxRIGHT | wxTOP | wxEXPAND, 2*LAYOUT_MARGIN);
        m_gauge->SetValue(0);

        wxSize sizeGauge = m_gauge->GetSize();
        sizeDlg.y += 2*LAYOUT_MARGIN + sizeGauge.y;
    }
    else
        m_gauge = (wxGauge *)NULL;

    // create the estimated/remaining/total time zones if requested
    m_elapsed = m_estimated = m_remaining = (wxStaticText*)NULL;
    m_display_estimated = m_last_timeupdate = m_break = 0;
    m_ctdelay = 0;

    // if we are going to have at least one label, remember it in this var
    wxStaticText *label = NULL;

    // also count how many labels we really have
    size_t nTimeLabels = 0;

    if ( style & wxPD_ELAPSED_TIME )
    {
        nTimeLabels++;

        label =
        m_elapsed = CreateLabel(_("Elapsed time : "), sizer);
    }

    if ( style & wxPD_ESTIMATED_TIME )
    {
        nTimeLabels++;

        label =
        m_estimated = CreateLabel(_("Estimated time : "), sizer);
    }

    if ( style & wxPD_REMAINING_TIME )
    {
        nTimeLabels++;

        label =
        m_remaining = CreateLabel(_("Remaining time : "), sizer);
    }

    if ( nTimeLabels > 0 )
    {
        // set it to the current time
        m_timeStart = wxGetCurrentTime();
        sizeDlg.y += nTimeLabels * (label->GetSize().y + LAYOUT_MARGIN);
    }

#if defined(__SMARTPHONE__)
    if ( m_hasSkipButton )
        SetRightMenu(wxID_SKIP, _("Skip"));
    if ( m_hasAbortButton )
        SetLeftMenu(wxID_CANCEL);
#else
    m_btnAbort = m_btnSkip = (wxButton *)NULL;
    bool sizeDlgModified = false;
    wxBoxSizer *buttonSizer = new wxBoxSizer(wxHORIZONTAL);

    const int sizerFlags =
#if defined(__WXMSW__) || defined(__WXPM__)
                           wxALIGN_RIGHT | wxALL
#else // !MSW
                           wxALIGN_CENTER_HORIZONTAL | wxBOTTOM | wxTOP
#endif // MSW/!MSW
                           ;

    if ( m_hasSkipButton )
    {
        m_btnSkip = new wxButton(this, wxID_SKIP, _("Skip"));

        // Windows dialogs usually have buttons in the lower right corner
        buttonSizer->Add(m_btnSkip, 0, sizerFlags, LAYOUT_MARGIN);
        sizeDlg.y += 2*LAYOUT_MARGIN + wxButton::GetDefaultSize().y;
        sizeDlgModified = true;
    }

    if ( m_hasAbortButton )
    {
        m_btnAbort = new wxButton(this, wxID_CANCEL);

        // Windows dialogs usually have buttons in the lower right corner
        buttonSizer->Add(m_btnAbort, 0, sizerFlags, LAYOUT_MARGIN);
        if(!sizeDlgModified)
            sizeDlg.y += 2*LAYOUT_MARGIN + wxButton::GetDefaultSize().y;
    }

    sizer->Add(buttonSizer, 0, sizerFlags, LAYOUT_MARGIN );
#endif // __SMARTPHONE__/!__SMARTPHONE__

    SetSizerAndFit(sizer);

    if (!isPda)
    {
        sizeDlg.y += 2*LAYOUT_MARGIN;

        // try to make the dialog not square but rectangular of reasonable width
        sizeDlg.x = (wxCoord)wxMax(3*widthText/2, 4*sizeDlg.y/3);
        SetClientSize(sizeDlg);
    }

    Centre(wxCENTER_FRAME | wxBOTH);

    if ( style & wxPD_APP_MODAL )
    {
        m_winDisabler = new wxWindowDisabler(this);
    }
    else
    {
        if ( m_parentTop )
            m_parentTop->Disable();
        m_winDisabler = NULL;
    }

    Show();
    Enable();

    // this one can be initialized even if the others are unknown for now
    //
    // NB: do it after calling Layout() to keep the labels correctly aligned
    if ( m_elapsed )
    {
        SetTimeLabel(0, m_elapsed);
    }

    Update();
}
示例#5
0
bool
wxProgressDialog::Update(int value, const wxString& newmsg, bool *skip)
{
    wxASSERT_MSG( value == -1 || m_gauge, wxT("cannot update non existent dialog") );

#ifdef __WXMSW__
    value /= m_factor;
#endif // __WXMSW__

    wxASSERT_MSG( value <= m_maximum, wxT("invalid progress value") );

    if ( m_gauge )
        m_gauge->SetValue(value);

    UpdateMessage(newmsg);

    if ( (m_elapsed || m_remaining || m_estimated) && (value != 0) )
    {
        unsigned long elapsed = wxGetCurrentTime() - m_timeStart;
        if (    m_last_timeupdate < elapsed
             || value == m_maximum
           )
        {
            m_last_timeupdate = elapsed;
            unsigned long estimated = m_break +
                  (unsigned long)(( (double) (elapsed-m_break) * m_maximum ) / ((double)value)) ;
            if (    estimated > m_display_estimated
                 && m_ctdelay >= 0
               )
            {
                ++m_ctdelay;
            }
            else if (    estimated < m_display_estimated
                      && m_ctdelay <= 0
                    )
            {
                --m_ctdelay;
            }
            else
            {
                m_ctdelay = 0;
            }
            if (    m_ctdelay >= m_delay          // enough confirmations for a higher value
                 || m_ctdelay <= (m_delay*-1)     // enough confirmations for a lower value
                 || value == m_maximum            // to stay consistent
                 || elapsed > m_display_estimated // to stay consistent
                 || ( elapsed > 0 && elapsed < 4 ) // additional updates in the beginning
               )
            {
                m_display_estimated = estimated;
                m_ctdelay = 0;
            }
        }

        long display_remaining = m_display_estimated - elapsed;
        if ( display_remaining < 0 )
        {
            display_remaining = 0;
        }

        SetTimeLabel(elapsed, m_elapsed);
        SetTimeLabel(m_display_estimated, m_estimated);
        SetTimeLabel(display_remaining, m_remaining);
    }

    if ( value == m_maximum )
    {
        if ( m_state == Finished )
        {
            // ignore multiple calls to Update(m_maximum): it may sometimes be
            // troublesome to ensure that Update() is not called twice with the
            // same value (e.g. because of the rounding errors) and if we don't
            // return now we're going to generate asserts below
            return true;
        }

        // so that we return true below and that out [Cancel] handler knew what
        // to do
        m_state = Finished;
        if( !(GetWindowStyle() & wxPD_AUTO_HIDE) )
        {
            EnableClose();
            DisableSkip();
#if defined(__WXMSW__) && !defined(__WXUNIVERSAL__)
            EnableCloseButton();
#endif // __WXMSW__

            if ( newmsg.empty() )
            {
                // also provide the finishing message if the application didn't
                m_msg->SetLabel(_("Done."));
            }

            wxYieldIfNeeded() ;

            (void)ShowModal();
        }
        else // auto hide
        {
            // reenable other windows before hiding this one because otherwise
            // Windows wouldn't give the focus back to the window which had
            // been previously focused because it would still be disabled
            ReenableOtherWindows();

            Hide();
        }
    }
    else // not at maximum yet
    {
        return DoAfterUpdate(skip);
    }

    // update the display in case yielding above didn't do it
    Update();

    return m_state != Canceled;
}
示例#6
0
bool
wxGenericProgressDialog::Update(int value, const wxString& newmsg, bool *skip)
{
    if ( !DoBeforeUpdate(skip) )
        return false;

    wxCHECK_MSG( m_gauge, false, "dialog should be fully created" );

#ifdef __WXMSW__
    value /= m_factor;
#endif // __WXMSW__

    wxASSERT_MSG( value <= m_maximum, wxT("invalid progress value") );

    m_gauge->SetValue(value);

    UpdateMessage(newmsg);

    if ( (m_elapsed || m_remaining || m_estimated) && (value != 0) )
    {
        unsigned long elapsed;
        unsigned long display_remaining;

        UpdateTimeEstimates( value,
                             elapsed,
                             m_display_estimated,
                             display_remaining );

        SetTimeLabel(elapsed, m_elapsed);
        SetTimeLabel(m_display_estimated, m_estimated);
        SetTimeLabel(display_remaining, m_remaining);
    }

    if ( value == m_maximum )
    {
        if ( m_state == Finished )
        {
            // ignore multiple calls to Update(m_maximum): it may sometimes be
            // troublesome to ensure that Update() is not called twice with the
            // same value (e.g. because of the rounding errors) and if we don't
            // return now we're going to generate asserts below
            return true;
        }

        // so that we return true below and that out [Cancel] handler knew what
        // to do
        m_state = Finished;
        if( !HasPDFlag(wxPD_AUTO_HIDE) )
        {
            EnableClose();
            DisableSkip();
#if defined(__WXMSW__) && !defined(__WXUNIVERSAL__)
            EnableCloseButton();
#endif // __WXMSW__

            if ( newmsg.empty() )
            {
                // also provide the finishing message if the application didn't
                m_msg->SetLabel(_("Done."));
            }

            // allow the window to repaint:
            // NOTE: since we yield only for UI events with this call, there
            //       should be no side-effects
            wxEventLoopBase::GetActive()->YieldFor(wxEVT_CATEGORY_UI);

            // NOTE: this call results in a new event loop being created
            //       and to a call to ProcessPendingEvents() (which may generate
            //       unwanted re-entrancies).
            (void)ShowModal();
        }
        else // auto hide
        {
            // reenable other windows before hiding this one because otherwise
            // Windows wouldn't give the focus back to the window which had
            // been previously focused because it would still be disabled
            ReenableOtherWindows();

            Hide();
        }
    }
    else // not at maximum yet
    {
        DoAfterUpdate();
    }

    // update the display in case yielding above didn't do it
    Update();

    return m_state != Canceled;
}
示例#7
0
bool wxGenericProgressDialog::Create( const wxString& title,
                                      const wxString& message,
                                      int maximum,
                                      wxWindow *parent,
                                      int style )
{
    SetTopParent(parent);

    m_parentTop = wxGetTopLevelParent(parent);
    m_pdStyle = style;

    wxWindow* const
        realParent = GetParentForModalDialog(parent, GetWindowStyle());

    if (!wxDialog::Create(realParent, wxID_ANY, title))
        return false;

    SetMaximum(maximum);

    // We need a running event loop in order to update the dialog and be able
    // to process clicks on its buttons, so ensure that there is one running
    // even if this means we have to start it ourselves (this happens most
    // commonly during the program initialization, e.g. for the progress
    // dialogs shown from overridden wxApp::OnInit()).
    if ( !wxEventLoopBase::GetActive() )
    {
        m_tempEventLoop = new wxEventLoop;
        wxEventLoop::SetActive(m_tempEventLoop);
    }

#if defined(__WXMSW__) && !defined(__WXUNIVERSAL__)
    // we have to remove the "Close" button from the title bar then as it is
    // confusing to have it - it doesn't work anyhow
    //
    // FIXME: should probably have a (extended?) window style for this
    if ( !HasPDFlag(wxPD_CAN_ABORT) )
    {
        EnableCloseButton(false);
    }
#endif // wxMSW

#if defined(__SMARTPHONE__)
    SetLeftMenu();
#endif

    m_state = HasPDFlag(wxPD_CAN_ABORT) ? Continue : Uncancelable;

    // top-level sizerTop
    wxSizer * const sizerTop = new wxBoxSizer(wxVERTICAL);

    m_msg = new wxStaticText(this, wxID_ANY, message);
    sizerTop->Add(m_msg, 0, wxLEFT | wxTOP, 2*LAYOUT_MARGIN);

    int gauge_style = wxGA_HORIZONTAL;
    if ( style & wxPD_SMOOTH )
        gauge_style |= wxGA_SMOOTH;

#ifdef __WXMSW__
    maximum /= m_factor;
#endif

    m_gauge = new wxGauge
                  (
                    this,
                    wxID_ANY,
                    maximum,
                    wxDefaultPosition,
                    // make the progress bar sufficiently long
                    wxSize(wxMin(wxGetClientDisplayRect().width/3, 300), -1),
                    gauge_style
                  );

    sizerTop->Add(m_gauge, 0, wxLEFT | wxRIGHT | wxTOP | wxEXPAND, 2*LAYOUT_MARGIN);
    m_gauge->SetValue(0);

    // create the estimated/remaining/total time zones if requested
    m_elapsed =
    m_estimated =
    m_remaining = NULL;

    // also count how many labels we really have
    size_t nTimeLabels = 0;

    wxSizer * const sizerLabels = new wxFlexGridSizer(2);

    if ( style & wxPD_ELAPSED_TIME )
    {
        nTimeLabels++;

        m_elapsed = CreateLabel(GetElapsedLabel(), sizerLabels);
    }

    if ( style & wxPD_ESTIMATED_TIME )
    {
        nTimeLabels++;

        m_estimated = CreateLabel(GetEstimatedLabel(), sizerLabels);
    }

    if ( style & wxPD_REMAINING_TIME )
    {
        nTimeLabels++;

        m_remaining = CreateLabel(GetRemainingLabel(), sizerLabels);
    }
    sizerTop->Add(sizerLabels, 0, wxALIGN_CENTER_HORIZONTAL | wxTOP, LAYOUT_MARGIN);

#if defined(__SMARTPHONE__)
    if ( HasPDFlag(wxPD_CAN_SKIP) )
        SetRightMenu(wxID_SKIP, _("Skip"));
    if ( HasPDFlag(wxPD_CAN_ABORT) )
        SetLeftMenu(wxID_CANCEL);
#else
    m_btnAbort =
    m_btnSkip = NULL;

    wxBoxSizer *buttonSizer = new wxBoxSizer(wxHORIZONTAL);

    // Windows dialogs usually have buttons in the lower right corner
    const int sizerFlags =
#if defined(__WXMSW__) || defined(__WXPM__) || defined(__WXOSX__)
                           wxALIGN_RIGHT | wxALL
#else // !MSW
                           wxALIGN_CENTER_HORIZONTAL | wxBOTTOM | wxTOP
#endif // MSW/!MSW
                           ;

    if ( HasPDFlag(wxPD_CAN_SKIP) )
    {
        m_btnSkip = new wxButton(this, wxID_SKIP, _("&Skip"));

        buttonSizer->Add(m_btnSkip, 0, sizerFlags, LAYOUT_MARGIN);
    }

    if ( HasPDFlag(wxPD_CAN_ABORT) )
    {
        m_btnAbort = new wxButton(this, wxID_CANCEL);

        buttonSizer->Add(m_btnAbort, 0, sizerFlags, LAYOUT_MARGIN);
    }

    if ( !HasPDFlag(wxPD_CAN_SKIP | wxPD_CAN_ABORT) )
        buttonSizer->AddSpacer(LAYOUT_MARGIN);

    sizerTop->Add(buttonSizer, 0, sizerFlags, LAYOUT_MARGIN );
#endif // __SMARTPHONE__/!__SMARTPHONE__

    SetSizerAndFit(sizerTop);

    Centre(wxCENTER_FRAME | wxBOTH);

    DisableOtherWindows();

    Show();
    Enable();

    // this one can be initialized even if the others are unknown for now
    //
    // NB: do it after calling Layout() to keep the labels correctly aligned
    if ( m_elapsed )
    {
        SetTimeLabel(0, m_elapsed);
    }

    Update();
    return true;
}
示例#8
0
wxProgressDialog::wxProgressDialog(const wxString& title,
                                   const wxString& message,
                                   int maximum,
                                   wxWindow *parent,
                                   int style)
                : wxDialog(GetParentForModalDialog(parent), wxID_ANY, title),
                  m_skip(false),
                  m_delay(3),
                  m_hasAbortButton(false),
                  m_hasSkipButton(false)
{
    // we may disappear at any moment, let the others know about it
    SetExtraStyle(GetExtraStyle() | wxWS_EX_TRANSIENT);
    m_windowStyle |= style;

    m_hasAbortButton = (style & wxPD_CAN_ABORT) != 0;
    m_hasSkipButton = (style & wxPD_CAN_SKIP) != 0;

#if defined(__WXMSW__) && !defined(__WXUNIVERSAL__)
    // we have to remove the "Close" button from the title bar then as it is
    // confusing to have it - it doesn't work anyhow
    //
    // FIXME: should probably have a (extended?) window style for this
    if ( !m_hasAbortButton )
    {
        EnableCloseButton(false);
    }
#endif // wxMSW

#if defined(__SMARTPHONE__)
    SetLeftMenu();
#endif

    m_state = m_hasAbortButton ? Continue : Uncancelable;
    m_maximum = maximum;

#if defined(__WXMSW__) || defined(__WXPM__)
    // we can't have values > 65,536 in the progress control under Windows, so
    // scale everything down
    m_factor = m_maximum / 65536 + 1;
    m_maximum /= m_factor;
#endif // __WXMSW__

    m_parentTop = wxGetTopLevelParent(parent);

    wxClientDC dc(this);
    dc.SetFont(wxSystemSettings::GetFont(wxSYS_DEFAULT_GUI_FONT));
    wxCoord widthText = 0;
    dc.GetTextExtent(message, &widthText, NULL, NULL, NULL, NULL);

    // top-level sizerTop
    wxSizer * const sizerTop = new wxBoxSizer(wxVERTICAL);

    m_msg = new wxStaticText(this, wxID_ANY, message);
    sizerTop->Add(m_msg, 0, wxLEFT | wxTOP, 2*LAYOUT_MARGIN);

    if ( maximum > 0 )
    {
        int gauge_style = wxGA_HORIZONTAL;
        if ( style & wxPD_SMOOTH )
            gauge_style |= wxGA_SMOOTH;
        m_gauge = new wxGauge
                      (
                        this,
                        wxID_ANY,
                        m_maximum,
                        wxDefaultPosition,
                        // make the progress bar sufficiently long
                        wxSize(wxMin(wxGetClientDisplayRect().width/3, 300), -1),
                        gauge_style
                      );

        sizerTop->Add(m_gauge, 0, wxLEFT | wxRIGHT | wxTOP | wxEXPAND, 2*LAYOUT_MARGIN);
        m_gauge->SetValue(0);
    }
    else
    {
        m_gauge = NULL;
    }

    // create the estimated/remaining/total time zones if requested
    m_elapsed =
    m_estimated =
    m_remaining = NULL;
    m_display_estimated =
    m_last_timeupdate =
    m_break = 0;
    m_ctdelay = 0;

    // also count how many labels we really have
    size_t nTimeLabels = 0;

    wxSizer * const sizerLabels = new wxFlexGridSizer(2);

    if ( style & wxPD_ELAPSED_TIME )
    {
        nTimeLabels++;

        m_elapsed = CreateLabel(_("Elapsed time:"), sizerLabels);
    }

    if ( style & wxPD_ESTIMATED_TIME )
    {
        nTimeLabels++;

        m_estimated = CreateLabel(_("Estimated time:"), sizerLabels);
    }

    if ( style & wxPD_REMAINING_TIME )
    {
        nTimeLabels++;

        m_remaining = CreateLabel(_("Remaining time:"), sizerLabels);
    }
    sizerTop->Add(sizerLabels, 0, wxALIGN_CENTER_HORIZONTAL | wxTOP, LAYOUT_MARGIN);

    if ( nTimeLabels > 0 )
    {
        // set it to the current time
        m_timeStart = wxGetCurrentTime();
    }

#if defined(__SMARTPHONE__)
    if ( m_hasSkipButton )
        SetRightMenu(wxID_SKIP, _("Skip"));
    if ( m_hasAbortButton )
        SetLeftMenu(wxID_CANCEL);
#else
    m_btnAbort =
    m_btnSkip = NULL;

    wxBoxSizer *buttonSizer = new wxBoxSizer(wxHORIZONTAL);

    // Windows dialogs usually have buttons in the lower right corner
    const int sizerFlags =
#if defined(__WXMSW__) || defined(__WXPM__)
                           wxALIGN_RIGHT | wxALL
#else // !MSW
                           wxALIGN_CENTER_HORIZONTAL | wxBOTTOM | wxTOP
#endif // MSW/!MSW
                           ;

    if ( m_hasSkipButton )
    {
        m_btnSkip = new wxButton(this, wxID_SKIP, _("&Skip"));

        buttonSizer->Add(m_btnSkip, 0, sizerFlags, LAYOUT_MARGIN);
    }

    if ( m_hasAbortButton )
    {
        m_btnAbort = new wxButton(this, wxID_CANCEL);

        buttonSizer->Add(m_btnAbort, 0, sizerFlags, LAYOUT_MARGIN);
    }

    sizerTop->Add(buttonSizer, 0, sizerFlags, LAYOUT_MARGIN );
#endif // __SMARTPHONE__/!__SMARTPHONE__

    SetSizerAndFit(sizerTop);

    Centre(wxCENTER_FRAME | wxBOTH);

    if ( style & wxPD_APP_MODAL )
    {
        m_winDisabler = new wxWindowDisabler(this);
    }
    else
    {
        if ( m_parentTop )
            m_parentTop->Disable();
        m_winDisabler = NULL;
    }

    Show();
    Enable();

    // this one can be initialized even if the others are unknown for now
    //
    // NB: do it after calling Layout() to keep the labels correctly aligned
    if ( m_elapsed )
    {
        SetTimeLabel(0, m_elapsed);
    }

    Update();
}