int F820121(TRUSERID *handle,int iRequest,ST_PACK *in_pack,int *pRetCode,char *szMsg)
{
T_t_pif_phydevice aphydev;
double dUniqNo=0;
int ret=0;
memset(&aphydev,0,sizeof(aphydev));
//从cpack中取得相应字符串
Strncpy_t(aphydev.dname,in_pack->sphone,sizeof(aphydev.dname));
Strncpy_t(aphydev.dtype,in_pack->spager,sizeof(aphydev.dtype));
Strncpy_t(aphydev.factory,in_pack->scert_no,sizeof(aphydev.factory));
Strncpy_t(aphydev.comments,(char*)in_pack->usset1,sizeof(aphydev.comments));
//设备标志从系统键值表中取得
ret=getNewUniqNo(KEYTYPE_PHYDEVICE,&dUniqNo);
if(ret)
{
*pRetCode=E_DB_SYSKEY_R;
goto L_RETU;
}
aphydev.phytype =D2I(dUniqNo);
ret=DB_t_pif_phydevice_add(&aphydev);
if(ret)
{
*pRetCode=E_DB_PHYDEVICE_I;
goto L_RETU;
}
return 0;
L_RETU:
return -1;
}
int F820122(TRUSERID *handle,int iRequest,ST_PACK *in_pack,int *pRetCode,char *szMsg)
{
T_t_pif_phydevice aphydev;
int ret=0;
int v_phytype=0;
memset(&aphydev,0,sizeof(aphydev));
v_phytype = in_pack->lvol6;
aphydev.phytype = in_pack->lvol6;
Strncpy_t(aphydev.dname,in_pack->sphone,sizeof(aphydev.dname));
Strncpy_t(aphydev.dtype,in_pack->spager,sizeof(aphydev.dtype));
Strncpy_t(aphydev.factory,in_pack->scert_no,sizeof(aphydev.factory));
Strncpy_t(aphydev.comments,in_pack->usset1,sizeof(aphydev.comments));
ret=DB_t_pif_phydevice_update_by_phytype(v_phytype,&aphydev);
if(ret)
{
if(DB_NOTFOUND == ret)
*pRetCode=E_DB_PHYDEVICE_N;
else
*pRetCode=E_DB_PHYDEVICE_U;
goto L_RETU;
}
return 0;
L_RETU:
return -1;
}
int F240004(TRUSERID *handle,int iRequest,ST_PACK *rPack,int *pRetCode,char *szMsg)
{
int ret=0;
T_t_refno tRefno;
T_t_transdtl transdtl; //卡操作流水表，用做冲正用
memset(&transdtl,0,sizeof transdtl);
ST_CPACK aPack;
ST_PACK *out_pack = &(aPack.pack);
SetCol(handle,0);
SetCol(handle,F_SHOLDER_AC_NO,F_SCLOSE_EMP,F_SORDER0,F_SORDER1,F_SSERIAL1,F_LVOL0,F_LVOL1,F_SDATE0,F_STIME0,F_SDATE1,F_STIME1,F_SCUST_NO,F_SCHANGE_EMP,F_SSERIAL0,F_LVOL2,F_SCUST_AUTH,F_SSTATUS1,F_SEMP_PWD,F_SEMP_PWD2,F_SSTATION0,F_SSTATION1,F_SORDER2,0);
ret = DB_t_refno_open_select_by_c1_and_status(RS_YKTREVSUCC);
if(ret)
{
if(DB_NOTFOUND == ret)
return E_DB_REFNO_N;
return E_DB_REFNO_R;
}
while(1)
{
memset(&tRefno,0,sizeof tRefno);
ret = DB_t_refno_fetch_select_by_c1(&tRefno);
if(ret)
{
if(DB_NOTFOUND==ret)
return 0;
else
return E_DB_REFNO_R;
}
break;
}
ret=DB_t_transdtl_read_by_accdate_and_termid_and_termseqno(tRefno.accdate,tRefno.termid,tRefno.termseqno,&transdtl);
if(ret)
{
if(ret==DB_NOTFOUND)
return E_DB_TRANSDTL_N;
else
return E_DB_TRANSDTL_R;
}
sprintf(out_pack->sorder0,"%-9d", int(transdtl.amount)); // 转账时 限制了金额不能有小数
Strncpy_t(out_pack->sdate0,transdtl.transdate,sizeof(out_pack->sdate0));
Strncpy_t(out_pack->stime0,transdtl.transtime,sizeof(out_pack->stime0));
sprintf(out_pack->sserial0,"%-10d",transdtl.cardno);
Strncpy_t(out_pack->scust_auth,transdtl.extdata,sizeof(out_pack->scust_auth));
out_pack->lvol0=atoi(transdtl.refno+8);
//out_pack->lvol1=atoi(transdtl.refno+8);
out_pack->lvol2=transdtl.termid;
des2src(out_pack->sholder_ac_no,transdtl.refno); // 交易参考号
des2src(out_pack->sdate1,tRefno.mac);
PutRow(handle,out_pack,pRetCode,szMsg);
return 0;
}
int F900290(TRUSERID *handle,int iRequest,ST_PACK *in_pack,int *pRetCode,char *szMsg)
{
char hi_operator[10+1]="";
char hi_idNo[255+1]="";
int i=0;
int ret=0;
char * pch;
// 准备处理结果中在ST_PACK中使用的字段
Strncpy_t(hi_operator, in_pack->scust_no, sizeof(hi_operator));
Strncpy_t(hi_idNo, in_pack->vsmess, sizeof(hi_idNo));
// 输入参数检查
trim(hi_operator);
trim(hi_idNo);
if (!strlen (hi_operator))
{
*pRetCode=E_INPUT_NOOPERATOR;
writelog(LOG_ERR,"Operator is null,hi_operator[%s]errcode[%d]!",hi_operator,E_INPUT_NOOPERATOR);
goto L_RETU;
}
if (!strlen(hi_idNo))
{
*pRetCode=E_INPUT_NOFUNCNO;
writelog(LOG_ERR,"Shopid is null,hi_idNo[%s]errcode[%d]!",hi_operator,E_INPUT_NOFUNCNO);
goto L_RETU;
}
pch = strtok (hi_idNo," ");
while (pch != NULL)
{
i = atoi(pch);
ret=Select_By_ShopBalance_Bet_Where_1(handle,pRetCode,szMsg,i);
if(ret)
{
*pRetCode=ret;
writelog(LOG_ALERT,"Select_By_ShopBalance_Bet_Where err,errcode[%d]",ret);
goto L_RETU;
}
pch = strtok (NULL, " ");
}
return 0;
L_RETU:
return *pRetCode;
}
int F820131(TRUSERID *handle,int iRequest,ST_PACK *in_pack,int *pRetCode,char *szMsg)
{
T_t_cardstrut acardstru;
double dUniqNo=0;
int scode=0;
memset(&acardstru,0,sizeof(acardstru));
//从cpack中取得相应字符串
acardstru. phytype = in_pack->lvol4;
acardstru. sectorno = in_pack->lvol5;
acardstru. blockno = in_pack->lvol6;
acardstru. begin_addr = in_pack->lvol7;
acardstru. end_addr = in_pack->lvol8;
acardstru. bytenum = in_pack->lvol9;
Strncpy_t(acardstru.define,(char*)in_pack->usset0,sizeof(acardstru.define));
Strncpy_t(acardstru.comments,(char*)in_pack->usset1,sizeof(acardstru.comments));
//设备标志从系统键值表中取得
scode=getNewUniqNo(KEYTYPE_CARD_STRU,&dUniqNo);
if(0 != scode)
{
*pRetCode=E_DB_SYSKEY_R;
sprintf(szMsg,"820121：取系统键值表错误，RetCode=%d\n",scode);
db_chk_err(__FILE__,__LINE__,&sqlca);
writelog(LOG_ERR,szMsg);
goto L_Ret;
}
//正确，赋值给结构体
acardstru.id = D2I(dUniqNo);
scode=DB_t_cardstrut_add(&acardstru);
if(0 != scode)
{
*pRetCode=E_DB_CARDSTRUT_I;
sprintf(szMsg,"卡结构信息表插入错误，SQLLCODE=%d\n",scode);
db_chk_err(__FILE__,__LINE__,&sqlca);
writelog(LOG_ERR,szMsg);
goto L_Ret;
}
return 0;
L_Ret:
return -1;
}
int F240004(TRUSERID *handle,int iRequest,ST_PACK *rPack,int *pRetCode,char *szMsg)
{
int ret=0;
T_t_tif_tradeserial tradeserial; //卡操作流水表，用做冲正用
memset(&tradeserial,0,sizeof tradeserial);
ST_CPACK aPack;
ST_PACK *out_pack = &(aPack.pack);
SetCol(handle,0);
SetCol(handle,F_SCLOSE_EMP,F_SORDER0,F_SORDER1,F_SSERIAL1,F_LVOL0,F_LVOL1,F_SDATE0,F_STIME0,F_SDATE1,F_STIME1,F_SCUST_NO,F_SCHANGE_EMP,F_SSERIAL0,F_LVOL2,F_SCUST_AUTH,F_SSTATUS1,F_SEMP_PWD,F_SEMP_PWD2,F_SSTATION0,F_SSTATION1,F_SORDER2,0);
ret = DB_t_tif_tradeserial_next_flush(&tradeserial);
if(ret)
{
if(ret==DB_NOTFOUND)
{
*pRetCode=E_DB_TRADESERIAL_N;
goto L_RETU;
}
else
{
*pRetCode=E_DB_TRADESERIAL_R;
writelog(LOG_ERR,"读取冲正记录失败,errcode=[%d]",ret);
goto L_RETU;
}
}
sprintf(out_pack->sorder0,"%-9d", int(tradeserial.trade_fee));
Strncpy_t(out_pack->sdate0,tradeserial.operate_date,sizeof(out_pack->sdate0));
Strncpy_t(out_pack->stime0,tradeserial.operate_time,sizeof(out_pack->stime0));
sprintf(out_pack->sserial0,"%-10d",tradeserial.cardno);
Strncpy_t(out_pack->scust_auth,tradeserial.b_act_id,sizeof(out_pack->scust_auth));
out_pack->lvol0=tradeserial.reviseserial_no;
out_pack->lvol1=tradeserial.serial_no;
out_pack->lvol2=tradeserial.deviceid;
PutRow(handle,out_pack,pRetCode,szMsg);
return 0;
L_RETU:
return ret;
}
int F820132(TRUSERID *handle,int iRequest,ST_PACK *in_pack,int *pRetCode,char *szMsg)
{
T_t_cardstrut acardstru;
int scode=0;
int v_id=0;
memset(&acardstru,0,sizeof(acardstru));
//从cpack中取得相应字符串
v_id = in_pack->lvol3;
acardstru. id = in_pack->lvol3;
acardstru. phytype = in_pack->lvol4;
acardstru. sectorno = in_pack->lvol5;
acardstru. blockno = in_pack->lvol6;
acardstru. begin_addr = in_pack->lvol7;
acardstru. end_addr = in_pack->lvol8;
acardstru. bytenum = in_pack->lvol9;
Strncpy_t(acardstru.define,(char*)in_pack->usset0,sizeof(acardstru.define));
Strncpy_t(acardstru.comments,(char*)in_pack->usset1,sizeof(acardstru.comments));
scode=DB_t_cardstrut_update_by_id(v_id,&acardstru);
if(SC_NOTFOUND==scode){
*pRetCode=E_DB_CARDSTRUT_N;
sprintf(szMsg,"卡物理结构信息表无相应记录，SQLLCODE=%d\n",scode);
db_chk_err(__FILE__,__LINE__,&sqlca);
writelog(LOG_ERR,szMsg);
goto L_Ret;
}
if(0!=scode)
{
*pRetCode=E_DB_CARDSTRUT_U;
sprintf(szMsg,"卡物理结构信息表更新错误，SQLLCODE=%d\n",scode);
db_chk_err(__FILE__,__LINE__,&sqlca);
writelog(LOG_ERR,szMsg);
goto L_Ret;
}
return 0;
L_Ret:
return -1;
}
int F820134(TRUSERID *handle,int iRequest,ST_PACK *in_pack,int *pRetCode,char *szMsg)
{
T_t_pif_cardstrut acardstru;
int v_id=0;
int nrows=0;
int r=0;
ST_CPACK aPack;
ST_PACK *out_pack = &(aPack.pack);
SetCol(handle,F_LVOL3,F_LVOL4,F_LVOL5,F_LVOL6,F_LVOL7,F_LVOL8,F_LVOL9,F_USSET0,F_USSET1,0);
memset(&acardstru,0,sizeof(acardstru));
v_id = in_pack->lvol3;
if(0 == v_id)
{
DB_t_pif_cardstrut_open_select_by_c1();
while(1){
memset(&acardstru,0,sizeof(acardstru));
r=DB_t_pif_cardstrut_fetch_select_by_c1(&acardstru);
if(0 != r)
{
if(SC_NOTFOUND==r)
{
if(0 == nrows)
{
*pRetCode=E_DB_CARDSTRUT_N;
sprintf(szMsg,"查询卡物理结构信息表无记录,SQLCODE=%d\n",r);
db_chk_err(__FILE__,__LINE__,&sqlca);
writelog(LOG_WARNING,szMsg);
goto L_Ret_if;
}
}
else
{
*pRetCode=E_DB_CARDSTRUT_R;
sprintf(szMsg,"读取卡物理结构信息表出错,SQLCODE=%d\n",r);
db_chk_err(__FILE__,__LINE__,&sqlca);
writelog(LOG_WARNING,szMsg);
goto L_Ret_if;
}
break;
}
out_pack->lvol3 = acardstru.id;
out_pack->lvol4 = acardstru.phytype;
out_pack->lvol5 = acardstru.sectorno;
out_pack->lvol6 = acardstru.blockno;
out_pack->lvol7 = acardstru.begin_addr;
out_pack->lvol8 = acardstru.end_addr;
out_pack->lvol9 = acardstru.bytenum;
Strncpy_t(out_pack->usset0,acardstru.define,sizeof(out_pack->usset0));
Strncpy_t(out_pack->usset1,acardstru.comments,sizeof(out_pack->usset1));
PutRow(handle,out_pack,pRetCode,szMsg);
nrows++;
if (15 == nrows)
{
// 这里调用AnswerDataPart是为了不让前端等待太长时间，在有15条记录的时候就给返回，至于后续数据就不用管了，BCC与前端自动会将后续数据采集回去
AnswerDataPart(handle,*pRetCode,szMsg);
}
};
DB_t_pif_cardstrut_close_select_by_c1();
return 0;
L_Ret_if:
DB_t_pif_cardstrut_close_select_by_c1();
return r;
}
else{
r=DB_t_pif_cardstrut_read_by_id(v_id,&acardstru);
if(SC_NOTFOUND==r)
{
*pRetCode=E_DB_CARDSTRUT_N;
sprintf(szMsg,"卡物理结构信息表不存在相应记录,SQLCODE=%d\n",r);
db_chk_err(__FILE__,__LINE__,&sqlca);
writelog(LOG_ERR,szMsg);
goto L_Ret_else;
}
else if(0!=r)
{
*pRetCode=E_DB_CARDSTRUT_R;
sprintf(szMsg,"卡物理信息表读取错误,SQLCODE=%d\n",r);
db_chk_err(__FILE__,__LINE__,&sqlca);
writelog(LOG_ERR,szMsg);
goto L_Ret_else;
}
out_pack->lvol3 = acardstru.id;
out_pack->lvol4 = acardstru.phytype;
out_pack->lvol5 = acardstru.sectorno;
out_pack->lvol6 = acardstru.blockno;
out_pack->lvol7 = acardstru.begin_addr;
out_pack->lvol8 = acardstru.end_addr;
out_pack->lvol9 = acardstru.bytenum;
Strncpy_t(out_pack->usset0,acardstru.define,sizeof(out_pack->usset0));
Strncpy_t(out_pack->usset1,acardstru.comments,sizeof(out_pack->usset1));
PutRow(handle,out_pack,pRetCode,szMsg);
return 0;
L_Ret_else:
return r;
}
}
int F847106(TRUSERID *handle,int iRequest,ST_PACK *rPack,int *pRetCode,char *szMsg)
{
int i=0;
int ret =0;
char logicdate[11]=""; //业务日期
char sysdate[11]="";
char systime[9]="";
int type=0;
InAcc IA;
double dSerialNo = 0;
int card_id=0;
char physical_no[41]="";
char sMaxCardBalance[20]="";
char sMsg[256]="";
double dMaxCardBalance=0;
T_t_tif_tradeserial tradeserial;
T_t_pif_card tCard;
T_t_tif_savdtl tSavdtl;
T_t_cif_customer tCustomer;
T_t_pif_spefee tSpeFee;
T_t_aif_account tAccount; //帐户表
ST_CPACK aPack;
ST_PACK *out_pack = &(aPack.pack);
memset(&tSavdtl,0,sizeof(tSavdtl));
memset(&tCard,0,sizeof(tCard));
memset(&tAccount,0,sizeof(tAccount));
memset(&tradeserial,0,sizeof(tradeserial));
memset(&tCustomer,0,sizeof(tCustomer));
memset(&tSpeFee,0,sizeof(tSpeFee));
memset(&IA,0,sizeof(IA));
ResetNormalCPack(&aPack,0,1);
SetCol(handle,0);
SetCol(handle,F_LSERIAL1,F_DAMT2,F_DAMT3,F_VSMESS,0);
if(amtcmp(rPack->damt0,0)<=0)
{
*pRetCode=E_INPUT_AMT;
goto L_RETU;
}
if(amtcmp(rPack->damt1,0)<0)
{
*pRetCode=E_INPUT_CARD_BALA;
goto L_RETU;
}
if(rPack->lvol10<1)
{
*pRetCode=E_INPUT_CARD_TXCNT;
goto L_RETU;
}
card_id=rPack->lvol0;
tradeserial.trade_fee = rPack->damt0; //充值金额
des2src(physical_no, rPack->sbank_acc); //物理卡号
getsysdate(sysdate);
getsystime(systime);
ret=GetLogicDate(logicdate); //业务日期
if(ret)
{
*pRetCode=ret;
goto L_RETU;
}
ret=DB_t_pif_card_read_by_card_id(card_id, &tCard);
if(ret)
{
if(DB_NOTFOUND==ret)
*pRetCode=E_CARDNO_NOT_EXIST;
else
*pRetCode=E_DB_CARD_R;
goto L_RETU;
}
if(strncmp(tCard.state_id,CARDSTAT_REG,4)!=0)
{
if('2'==tCard.state_id[CARDSTAT_TYPE_REG])
*pRetCode = E_CARDNO_LOGOUT;
else if('3'==tCard.state_id[CARDSTAT_TYPE_REG])
*pRetCode = E_CARD_CHANGE;
else if(tCard.state_id[CARDSTAT_TYPE_LOST]==STATE_TRUE)
*pRetCode=E_CARDNO_LOST;
else if(tCard.state_id[CARDSTAT_TYPE_FREEZE]==STATE_TRUE)
*pRetCode=E_CARDNO_FREEZE;
else if(tCard.state_id[CARDSTAT_TYPE_WFAIL]==STATE_TRUE)
*pRetCode=E_CARDNO_WFAIL;
goto L_RETU;
}
trim(physical_no);
trim(tCard.physical_no);
if(strcmp(tCard.physical_no,physical_no)!=0)
{
writelog(LOG_ERR,"db physical_no[%s],input physical_no[%s]",tCard.physical_no,physical_no);
*pRetCode= E_CARD_PHYNO_DIFFER;
goto L_RETU;
}
//根据卡号和钱包号得到消费者账号(借方)
ret=DB_t_aif_account_read_by_card_id_and_purse_id(card_id, PURSE_NO_ONE,&tAccount);
if(ret)
{
writelog(LOG_ERR,"DB_t_aif_account_read_by_card_id_and_purse_id ret[%d]card_id[%d]",ret,card_id);
if(DB_NOTFOUND==ret)
*pRetCode=E_ACTNO_NOT_EXIST;
else
*pRetCode=E_DB_ACCOUNT_R;
goto L_RETU;
}
ret=GetParameter(GLOBE_MAXCARDBALANCE,sMaxCardBalance);
if(ret)
{
*pRetCode=ret;
goto L_RETU;
}
dMaxCardBalance=atof(sMaxCardBalance);
if(amtcmp(tAccount.cur_bala+tradeserial.trade_fee,dMaxCardBalance)>0)
{
*pRetCode= E_AMT_EXCEED_MAX;
goto L_RETU;
}
ret=DB_t_cif_customer_read_lock_by_cur_and_cut_id(tCard.cosumer_id, &tCustomer);
if(ret)
{
writelog(LOG_ERR,"cut_id[%d]",tCard.cosumer_id);
if(DB_NOTFOUND==ret)
*pRetCode= E_CUSTOMER_NOT_EXIST;
else
*pRetCode= E_DB_CUSTOMER_R;
goto L_RETU;
}
//得到收费类别
if(0==tCustomer.fee_type)
{
ret=DB_t_pif_spefee_read_by_dept_code_and_cut_type(tCustomer.classdept_no, tCustomer.cut_type,&tSpeFee);
if(ret)
{
if(DB_NOTFOUND==ret)
{
tCustomer.fee_type=tCustomer.cut_type;
}
else
{
DB_t_cif_customer_free_lock_cur();
*pRetCode=E_DB_SPEFEE_R;
goto L_RETU;
}
}
else
{
tCustomer.fee_type=tSpeFee.fee_type;
}
//更新客户表的收费类别字段
ret=DB_t_cif_customer_update_lock_by_cur(&tCustomer);
if(ret)
{
if(DB_NOTFOUND==ret)
*pRetCode= E_CUSTOMER_NOT_EXIST;
else
*pRetCode= E_DB_CUSTOMER_U;
goto L_RETU;
}
}
DB_t_cif_customer_free_lock_cur();
type=rPack->lvol4; //交易类型
IA.dArrInAmt[0]=tradeserial.trade_fee;
switch(type)
{
case TYPE_CASH: //现金
IA.iArrInFeeSwitch[1]=1;
break;
case TYPE_BILL: //支票
IA.iArrInFeeSwitch[2]=1;
break;
case TYPE_FUNDBOOK: //经费本
IA.iArrInFeeSwitch[3]=1;
break;
default:
*pRetCode=E_INPUT_DEPOSIT_TYPE;
goto L_RETU;
}
ret = getNewUniqNo(KEYTYPE_TRADESERIAL,&dSerialNo); //获得最大流水号
if(ret)
{
*pRetCode = ret;
writelog(LOG_ERR," ERRCODE = [%d]",ret);
goto L_RETU;
}
tradeserial.serial_no = D2I(dSerialNo); //流水号
tradeserial.other_seri_no = 0; //上传端流水号
tradeserial.serial_type = TXCODE_SAVING_CASH;
tradeserial.serial_state = SERISTAT_DEBT; //流水状态
des2src(tradeserial.operate_date,sysdate); //发生日期
des2src(tradeserial.operate_time,systime); //发生时间
des2src(tradeserial.collect_date,sysdate); //采集日期
des2src(tradeserial.collect_time,systime); //采集时间
des2src(tradeserial.enteract_date,logicdate); //处理日期
des2src(tradeserial.enteract_time,systime); //处理时间
tradeserial.maindevice_id = rPack->lvol6; //上传工作站标识
tradeserial.device_id = rPack->lvol7; //采集设备标识
tradeserial.card_id =card_id; //卡号
tradeserial.purse_id = rPack->lvol1; //钱包号
//tradeserial.customer_id = rPack->lvol2; //客户标识
tradeserial.customer_id = tCustomer.cut_id;
tradeserial.in_balance=rPack->damt1;
tradeserial.trade_count=rPack->lvol10+1; //交易次数
Strncpy_t(tradeserial.oper_code , rPack->scust_limit, sizeof(tradeserial.oper_code)); //操作员代码
tradeserial.sys_id = 0; //外部系统标识
switch(type)
{
case TYPE_CASH: //现金
break;
case TYPE_BILL: //支票
case TYPE_FUNDBOOK: //经费本
case TYPE_OTHER: //其他
tSavdtl.amount=rPack->damt0; //发生额
if(amtcmp(tSavdtl.amount,0)<=0)
break;
des2src(tSavdtl.bill_no,rPack->sphone); //票据号码
if(strlen(tSavdtl.bill_no)<1)
{
*pRetCode=E_INPUT_BILLNO;
goto L_RETU;
}
tSavdtl.card_no=tCard.card_id; //卡号
des2src(tSavdtl.oper_no,rPack->scust_limit); //操作员
tSavdtl.seqno=tradeserial.serial_no; //流水号
des2src(tSavdtl.tx_date,sysdate); //发生日期
des2src(tSavdtl.tx_time,systime); //发生时间
tSavdtl.cnt=1; //票据数量
tSavdtl.bill_type=type; //票据类型
tSavdtl.tx_code=tradeserial.serial_type; //交易码
ret=DB_t_tif_savdtl_add(&tSavdtl);
if(ret)
{
if(DB_REPEAT==ret)
*pRetCode = E_DB_SAVDTL_E;
else
*pRetCode = E_DB_SAVDTL_I;
goto L_RETU;
}
break;
default:
*pRetCode=E_TXCODE_NOT_EXIST;
goto L_RETU;
}
des2src(IA.sArrInActno[0],tAccount.account_id); //帐户
IA.iCardNo=tCard.card_id;
IA.iFeeType=tCustomer.fee_type;
IA.dArrInAmt[0]=tradeserial.trade_fee;
IA.iArrInFeeSwitch[0]=rPack->lvol0;
IA.iArrInFeeSwitch[5]=rPack->lvol5;
IA.iArrInFeeSwitch[6]=rPack->lvol6;
IA.iArrInFeeSwitch[7]=rPack->lvol7;
IA.iArrInFeeSwitch[8]=rPack->lvol8;
IA.iArrInFeeSwitch[9]=rPack->lvol9;
IA.iArrInFeeSwitch[10]=rPack->lvol10;
ret=process(&IA,&tradeserial);
if(ret)
{
writelog(LOG_ERR,"process ret[%d]",ret);
*pRetCode=ret;
goto L_RETU;
}
sprintf(out_pack->vsmess,"流水号:%d 卡号:%d ",IA.iSerialNo,IA.iCardNo);
for(i=1;i<=IA.iOutTxTypeCnt;i++)
{
switch(IA.iArrOutTxType[i])
{
case TXTYPE_TOLL_DEPOSIT:
case TXTYPE_TOLL_DEPOSIT_BILL:
case TXTYPE_TOLL_DEPOSIT_FUNDBOOK:
case TXTYPE_DEDUCT_DEPOSIT:
case TXTYPE_RETURN_DEPOSIT:
tradeserial.deposit_fee=IA.dArrOutAmt[i];
break;
case TXTYPE_PRE_TOLL_BOARD:
case TXTYPE_PRE_TOLL_BOARD_BILL:
case TXTYPE_PRE_TOLL_BOARD_FUNDBOOK:
case TXTYPE_TOLL_BOARD:
case TXTYPE_DEDUCT_BOARD:
case TXTYPE_RETURN_BOARD:
case TXTYPE_RETURN_BOARD_BILL:
case TXTYPE_RETURN_BOARD_FUNDBOOK:
case TXTYPE_PRE_TOLL_MANAGE:
tradeserial.boardfee=IA.dArrOutAmt[i];
break;
case TXTYPE_TOLL_CHARGE:
case TXTYPE_TOLL_CHARGE_BILL:
case TXTYPE_TOLL_CHARGE_FUNDBOOK:
tradeserial.in_fee=IA.dArrOutAmt[i];
break;
case TXTYPE_TOLL_CARDCOST:
case TXTYPE_TOLL_CARDCOST_BILL:
case TXTYPE_TOLL_CARDCOST_FUNDBOOK:
tradeserial.cost_fee=IA.dArrOutAmt[i];
break;
default:
break;
}
if(amtcmp(IA.dArrOutAmt[i],0)!=0)
{
sprintf(sMsg,"%s:%.2lf元 ",IA.sArrOutTxName[i],IA.dArrOutAmt[i]);
strcat(out_pack->vsmess,sMsg);
}
}
sprintf(sMsg,"充值前卡余额:%.2lf元 卡当前余额:%.2lf元",tradeserial.in_balance,tradeserial.out_balance);
strcat(out_pack->vsmess,sMsg);
writelog(LOG_DEBUG,out_pack->vsmess);
ret = DB_t_tif_tradeserial_add(&tradeserial);
if (ret)
{
writelog(LOG_ERR,"ret[%d]",ret);
if(DB_REPEAT==ret)
*pRetCode = E_DB_TRADESERIAL_E;
else
*pRetCode = E_DB_TRADESERIAL_I;
goto L_RETU;
}
if(amtcmp(tradeserial.out_balance,0)<0)
{
*pRetCode=E_ENTER_ACCOUNT;
goto L_RETU;
}
out_pack->damt2=tradeserial.out_balance; //出卡值
out_pack->damt3=tradeserial.boardfee; //搭伙费
out_pack->lserial1=tradeserial.serial_no; //流水号
PutRow(handle,out_pack,pRetCode,szMsg);
return 0;
L_RETU:
return -1;
}
int Select_By_ShopBalance_Bet_Where_1(TRUSERID *handle,int *pRetCode,char *szMsg,int shop_id)
{
int ret=0;
int nrows = 0;
int i=0;
ST_CPACK aPack;
ST_PACK *out_pack = &(aPack.pack);
T_t_tif_report_shop_balance pv_tif_shopdeptfee;
memset(&pv_tif_shopdeptfee,0,sizeof(pv_tif_shopdeptfee));
i=shop_id;
ret= DB_v_tif_shopdeptfee_open_select_by_c5();
if(ret)
{
*pRetCode=ret;
db_chk_err(__FILE__,__LINE__,&sqlca);
writelog(LOG_ALERT,"DB_v_tif_shopdeptfee_open_select_by_c5 err sqlcode[%d]",SQLCODE);
goto L_RETU;
}
SetCol(handle,0);
//SetCol(handle,F_LVOL0,F_SALL_NAME,F_LVOL1,F_LVOL2,F_DAMT0,F_DAMT1,F_DAMT2,F_SORDER0,F_STX_PWD,0);
SetCol(handle,F_SCUST_NO,F_SCUST_NO2,F_SALL_NAME,F_LVOL0,F_LVOL1,F_LVOL2,F_LVOL7,F_DAMT0,F_DAMT1,F_DAMT2,F_SROOM_NO2,F_STX_PWD,F_SORDER0
,0);
while(1)
{
memset(out_pack,0,sizeof(ST_PACK));
// 初始化宿主变量
ret=DB_v_tif_shopdeptfee_fetch_select_by_c5(&pv_tif_shopdeptfee);
if(ret)
{
db_chk_err(__FILE__,__LINE__,&sqlca);
if(ret==DB_NOTFOUND)
{
if(0==nrows)
{
*pRetCode=E_DB_T_REPORT_SHOP_BALANCE_N;
writelog(LOG_DEBUG,"fetch t_tif_report_shop_balance no data [%d]",ret);
goto L_RETU;
}
else
break;
}
else *pRetCode=E_DB_T_REPORT_SHOP_BALANCE_R;
writelog(LOG_ALERT,"DB_v_tif_shopdeptfee_fetch_select_by_c5 err sqlcode[%d]",SQLCODE);
goto L_RETU;
}
if(i==pv_tif_shopdeptfee.shop_id||i==pv_tif_shopdeptfee.dept_id)
{
out_pack->lvol0 = pv_tif_shopdeptfee.shop_id;
memset(out_pack->sall_name,0,sizeof out_pack->sall_name);
Strncpy_t(out_pack->sall_name, pv_tif_shopdeptfee.shop_name, sizeof(out_pack->sall_name));
out_pack->lvol1 = pv_tif_shopdeptfee.dept_id;
out_pack->lvol2 = pv_tif_shopdeptfee.trade_num;
out_pack->damt0 = pv_tif_shopdeptfee.trade_amt;
out_pack->damt1 = pv_tif_shopdeptfee.mng_amt;
out_pack->damt2 = pv_tif_shopdeptfee.trade_amt+pv_tif_shopdeptfee.mng_amt;
PutRow(handle,out_pack,pRetCode,szMsg);
nrows++;
}
}
DB_v_tif_shopdeptfee_close_select_by_c5();
// EXEC SQL CLOSE C1;
return 0;
L_RETU:
return *pRetCode;
int F847109(TRUSERID *handle,int iRequest,ST_PACK *in_pack,int *pRetCode,char *szMsg)
{
int ret = 0;
char seed_key[17] = ""; //种子密钥
char logicdate[11]="";
T_t_aif_account tAccount;
T_t_cif_customer tCustomer;
ST_CPACK aPack;
ST_PACK *pp = &(aPack.pack);
ResetNormalCPack(&aPack,0,1);
memset(&tAccount,0,sizeof(tAccount));
memset(&tCustomer,0,sizeof(tCustomer));
memcpy(seed_key,STATIC_SEED_KEY,sizeof(seed_key)); //读种子密钥
tCustomer.cut_id = in_pack->lvol1; //客户号
ret=GetLogicDate(logicdate); //业务日期
if(ret)
{
*pRetCode = ret;
goto L_RETU;
}
ret=DB_t_cif_customer_read_by_cut_id(tCustomer.cut_id,&tCustomer);
if(ret)
{
writelog(LOG_ERR,"cut_id[%d]",tCustomer.cut_id);
if(DB_NOTFOUND==ret)
*pRetCode=E_CUSTOMER_NOT_EXIST;
else
*pRetCode=E_DB_CUSTOMER_R;
goto L_RETU;
}
if(CUSTSTAT_LOGOUT==tCustomer.cut_state)
{
*pRetCode=E_CUSTOMER_LOGOUT;
goto L_RETU;
}
ret=DB_t_aif_account_read_by_customer_id_and_act_type(tCustomer.cut_id,ACCTYPE_SHOPMAIN, &tAccount);
if(ret)
{
writelog(LOG_ERR,"cut_id[%d]",tCustomer.cut_id);
if(DB_NOTFOUND!=ret)
{
*pRetCode=E_DB_ACCOUNT_R;
goto L_RETU;
}
}
else
{
if(tAccount.current_state!=ACCOUNTSTAT_LOGOUT)
{
*pRetCode=E_ACTNO_EXIST;
goto L_RETU;
}
}
memset(&tAccount,0,sizeof(tAccount));
des2src(tAccount.open_date,logicdate); //开户日期
des2src(tAccount.cut_name,in_pack->sname); //客户名称
tAccount.customer_id=tCustomer.cut_id; //客户号
tAccount.cut_type = in_pack->lvol2; //客户类别
des2src(tAccount.stuemp_no,in_pack->sname2); //客户学号或员工号
tAccount.current_state = ACCOUNTSTAT_REGIST; //当前状态
ret = getNewActno(tAccount.account_id); //获得新帐号
if (ret)
{
*pRetCode = ret;
goto L_RETU;
}
tAccount.act_type = ACCTYPE_SHOPMAIN; //帐号类别
tAccount.card_id = 0; //关联卡号
tAccount.purse_id = 0; //关联卡钱包号
// tAccount.card_state = 0; //卡状态
tAccount.card_type = 0; //卡类别
des2src(tAccount.subno,SUBJECT_SHOPSAVING); //所属科目
EncodePwd(seed_key,in_pack->sserial0,tAccount.password,0); //帐户密码
Strncpy_t(tAccount.isautotra,in_pack->scust_type,sizeof(tAccount.isautotra)); //是否自动转帐
tAccount.last_bala = 0.00; //前次帐户总余额
tAccount.last_freebala = 0.00; //前次帐户可用余额
tAccount.last_frozebala = 0.00; //前次帐户冻结余额
tAccount.cur_bala = 0.00; //当前帐户总余额
tAccount.cur_freebala = 0.00; //当前帐户可用余额
tAccount.cur_frozebala = 0.00; //当前帐户冻结余额
tAccount.out_bala = 0.00; //借方发生总额
tAccount.in_bala = 0.00; //贷方发生总额
tAccount.out_count = 0; //借方发生总数
tAccount.in_count = 0; //贷方发生总数
tAccount.card_balance = 0.00; //当前卡中帐户余额
tAccount.consume_count = 0; //当前卡中帐户消费次数
// 插入帐户信息表
ret = DB_t_aif_account_add(&tAccount);
if (ret)
{
if(DB_REPEAT==ret)
*pRetCode = E_DB_ACCOUNT_E;
else
*pRetCode = E_DB_ACCOUNT_I;
goto L_RETU;
}
// 返回帐号到前台
SetCol(handle,0);
SetCol(handle,F_SSTATION0,0);
des2src(pp->sstation0, tAccount.account_id); //帐号
PutRow(handle,pp,pRetCode,szMsg);
return 0;
L_RETU:
return -1;
}
int F930032(TRUSERID *handle,int iRequest,ST_PACK *in_pack,int *pRetCode,char *szMsg) {
int ret = 0; //返回码
int hi_sign = 0; //挂失解挂标志
double h_temp_Serial_no = 0; //本地流水号
char logicdate[11]="";
char sysdate[11]="";
char systime[9]="";
int dev_id=0;
T_t_tif_tradeserial tradeserial;
memset(&tradeserial,0,sizeof(tradeserial));
hi_sign = in_pack->lvol6; //挂失解挂标志
ret=chk_dyn_key(in_pack->lcert_code,in_pack->scust_limit2);
if(ret) {
*pRetCode = ret;
goto L_RETU;
}
getsysdate(sysdate);
getsystime(systime);
ret=GetLogicDate(logicdate); //业务日期
if(ret) {
*pRetCode = ret;
goto L_RETU;
}
switch (hi_sign) {
case 0:
tradeserial.serial_type = TXCODE_CARD_LOSS; //挂失
break;
case 1:
tradeserial.serial_type = TXCODE_CARD_COMEBACK_LOSS; //解挂
break;
case 2:
tradeserial.serial_type = TXCODE_MODIFICATIONPW; //修改密码
break;
default:
*pRetCode = -1;
writelog(LOG_ERR,"挂失解挂修改密码标志出错。ERRCODE[%d] ",*pRetCode);
goto L_RETU;
break;
}
/* 读取设备ID */
ret = GetDevIdByDevPhyId(&dev_id,in_pack->sdate1);
if (ret) {
*pRetCode = ret;
writelog(LOG_ERR,"GetDevIdByDevPhyId err[%d] ",ret);
goto L_RETU;
}
tradeserial.serial_state = SERISTAT_NODEBT; //流水状态
ret = getNewUniqNo(KEYTYPE_TRADESERIAL,&h_temp_Serial_no);
if(ret) {
*pRetCode = ret;
writelog(LOG_ERR,"获取最大流水号错误: ERRCODE = [%d]",ret);
goto L_RETU;
}
tradeserial.serial_no = D2I(h_temp_Serial_no); //流水号
snprintf(tradeserial.operate_date,9,"20%s",in_pack->spost_code); //发生日期(格式化输入的日期)
des2src(tradeserial.operate_time,in_pack->spost_code2); //发生时间(格式化输入的时间)
des2src(tradeserial.collect_date,sysdate); //采集日期
des2src(tradeserial.collect_time,systime); //采集时间
des2src(tradeserial.enteract_date,logicdate); //处理日期
des2src(tradeserial.enteract_time,systime); //处理时间
tradeserial.other_seri_no = in_pack->lvol4; //上传端流水号
tradeserial.serial_state = SERISTAT_DEBT; //流水状态
tradeserial.maindeviceid = in_pack->lcert_code; //上传工作站标识
tradeserial.deviceid = dev_id; //采集设备标识
tradeserial.cardno = in_pack->lvol5; //卡号
Strncpy_t(tradeserial.showid,in_pack->sstation0,sizeof(tradeserial.showid)); //显示卡号
Strncpy_t(tradeserial.oldpwd,in_pack->sstock_code,sizeof(tradeserial.oldpwd)); //原始密码
Strncpy_t(tradeserial.newpwd,in_pack->sstock_code2,sizeof(tradeserial.newpwd)); //更新密码
des2src(tradeserial.opercode,"system");
ret = DB_t_tif_tradeserial_add(&tradeserial);
if (ret) {
writelog(LOG_ERR,"ret[%d]",ret);
if(DB_REPEAT==ret)
*pRetCode = E_DB_TRADESERIAL_E;
else
*pRetCode = E_DB_TRADESERIAL_I;
goto L_RETU;
}
return 0;
L_RETU:
return -1;
}
int F820124(TRUSERID *handle,int iRequest,ST_PACK *in_pack,int *pRetCode,char *szMsg)
{
T_t_phydevice aphydev;
//int scode=0;
int v_phytype=0;
int nrows=0;
int r=0;
ST_CPACK aPack;
ST_PACK *out_pack = &(aPack.pack);
SetCol(handle,F_LVOL6,F_SPHONE,F_SPAGER,F_SCERT_NO,F_USSET1,0);
memset(&aphydev,0,sizeof(aphydev));
v_phytype = in_pack->lvol6;
if(0==v_phytype)
{
DB_t_phydevice_open_select_by_c1();
while(1){
memset(&aphydev,0,sizeof(aphydev));
r=DB_t_phydevice_fetch_select_by_c1(&aphydev);
if(0 != r)
{
if(SC_NOTFOUND == r)
{
if(0 == nrows)
{
*pRetCode=E_DB_PHYDEVICE_N;
sprintf(szMsg,"查询设备结构信息表无记录,SQLCODE=%d\n",SQLCODE);
writelog(LOG_WARNING,szMsg);
db_chk_err(__FILE__,__LINE__,&sqlca);
goto L_Ret_if;
}
}
else
{
*pRetCode=E_DB_PHYDEVICE_R;
sprintf(szMsg,"读取设备结构信息表出错,SQLCODE=%d\n",SQLCODE);
writelog(LOG_WARNING,szMsg);
db_chk_err(__FILE__,__LINE__,&sqlca);
goto L_Ret_if;
}
break;
}
out_pack->lvol6 = aphydev.phytype;
Strncpy_t(out_pack->sphone,aphydev.dname,sizeof(out_pack->sphone));
Strncpy_t(out_pack->spager,aphydev.dtype,sizeof(out_pack->spager));
Strncpy_t(out_pack->scert_no,aphydev.factory,sizeof(out_pack->scert_no));
Strncpy_t((char*)out_pack->usset1,aphydev.comments,sizeof(out_pack->usset1));
PutRow(handle,out_pack,pRetCode,szMsg);
nrows++;
if (15==nrows)
{
// 这里调用AnswerDataPart是为了不让前端等待太长时间，在有15条记录的时候就给返回，至于后续数据就不用管了，BCC与前端自动会将后续数据采集回去
AnswerDataPart(handle,*pRetCode,szMsg);
}
};
DB_t_phydevice_close_select_by_c1();
return 0;
L_Ret_if:
DB_t_phydevice_close_select_by_c1();
return r;
}
else{
r=DB_t_phydevice_read_by_phytype(v_phytype,&aphydev);
if(SC_NOTFOUND==r)
{
*pRetCode=E_DB_PHYDEVICE_N;
sprintf(szMsg,"设备物理信息表不存在相应记录,SQLCODE=%d\n",SQLCODE);
writelog(LOG_ERR,szMsg);
db_chk_err(__FILE__,__LINE__,&sqlca);
goto L_Ret_else;
}
else if(r!=0)
{
*pRetCode=E_DB_PHYDEVICE_R;
sprintf(szMsg,"设备物理信息表读取错误,SQLCODE=%d\n",SQLCODE);
writelog(LOG_ERR,szMsg);
db_chk_err(__FILE__,__LINE__,&sqlca);
goto L_Ret_else;
}
out_pack->lvol6 = aphydev.phytype;
Strncpy_t(out_pack->sphone,aphydev.dname,sizeof(out_pack->sphone));
Strncpy_t(out_pack->spager,aphydev.dtype,sizeof(out_pack->spager));
Strncpy_t(out_pack->scert_no,aphydev.factory,sizeof(out_pack->scert_no));
Strncpy_t((char*)out_pack->usset1,aphydev.comments,sizeof(out_pack->usset1));
PutRow(handle,out_pack,pRetCode,szMsg);
return 0;
L_Ret_else:
return r;
}
}
int F240002(TRUSERID *handle,int iRequest,ST_PACK *rPack,int *pRetCode,char *szMsg)
{
int ret=0;
double unique=0;
int temp_serial_no=0;
char logicdate[11]="";
char buffer[16]="";
int i=0;
double trans_amt=0.0;
char sMsg[255]="";
char sDebugMsg[255]="";
char sMaxCardBalance[20]="";
double dMaxCardBalance=0;
T_t_aif_account tAccount; //帐户表
T_t_cif_customer tCustomer;
T_t_pif_spefee tSpeFee;
T_t_tif_tradeserial tradeserial; //卡操作流水表
T_t_pif_card card;
InAcc IA;
memset(&tSpeFee,0,sizeof(tSpeFee));
memset(&tCustomer,0,sizeof(tCustomer));
memset(&tAccount,0,sizeof(tAccount));
memset(&IA,0,sizeof(IA));
memset(&tradeserial,0,sizeof(tradeserial));
memset(&card,0,sizeof(card));
ST_CPACK aPack;
ST_PACK *out_pack = &(aPack.pack);
ResetNormalCPack(&aPack,0,1);
SetCol(handle,0);
SetCol(handle,F_DAMT0,F_DAMT1,F_DAMT2,F_LVOL1,F_LVOL2,F_SBANK_CODE,F_SEMP_NO,0);
//memset(&tradeserial_bak,0,sizeof(tradeserial_bak));
ret=GetLogicDate(logicdate); //业务日期
if(ret)
{
*pRetCode=E_TRANS_UNKNOW_ERROR;
writelog(LOG_ERR,"GetLogicDate error,errcode=[%d]",ret);
goto L_RETU;
}
//判断设备是否登陆
if(0!=device_login_yes_or_no(atoi(rPack->sorder2)))
{
*pRetCode=E_TRANS_TERM_NOLOGIN;
writelog(LOG_ERR,"Device don't login");
goto L_RETU;
}
//判断是否处于日终结算状态
ret=GetParameter(GLOBE_FLAG_BALANCE,buffer);
if(ret)
{
*pRetCode=E_TRANS_UNKNOW_ERROR;
writelog(LOG_ERR,"GetParameter error,errcode=[%d]",ret);
goto L_RETU;
}
else if(strncmp(buffer,"0",1)!=0)
{
*pRetCode=E_TRANS_BANK_SERVICE_NOEXIT;
writelog(LOG_ERR,"System is balance now!");
goto L_RETU;
}
ret=DB_t_pif_card_read_by_card_id(atoi(rPack->sserial0),&card);
if(ret)
{
*pRetCode=E_TRANS_SCHACC_NOEXIT;
writelog(LOG_ERR,"Create serial_no error,error code=[%d]",ret);
goto L_RETU;
}
if(strncmp(card.state_id,CARDSTAT_LOGOUT,4)==0)
{
*pRetCode=E_TRANS_SCHACC_DESTORY;
writelog(LOG_ERR,"card.state_id=[%d]",card.card_id);
goto L_RETU;
}
if(STATE_TRUE==card.state_id[CARDSTAT_TYPE_LOST])
{
DB_t_pif_card_free_lock_by_cur();
*pRetCode=E_TRANS_SCHCARD_LOSTING;
writelog(LOG_ERR,"card_state=[%s]",card.state_id);
goto L_RETU;
}
if(STATE_TRUE==card.state_id[CARDSTAT_TYPE_FREEZE])
{
DB_t_pif_card_free_lock_by_cur();
*pRetCode=E_TRANS_SCHCARD_FREEZE;
writelog(LOG_ERR,"card_state=[%s]",card.state_id);
goto L_RETU;
}
if(STATE_TRUE==card.state_id[CARDSTAT_TYPE_WFAIL])
{
DB_t_pif_card_free_lock_by_cur();
*pRetCode=E_TRANS_SCHCARD_WFAIL;
writelog(LOG_ERR,"card_state=[%s]",card.state_id);
goto L_RETU;
}
//转账不允许转小数金额
if((rPack->lvol5)%100>0)
{
*pRetCode=E_TRANS_TRANSMONEY_OUTRANGE;
writelog(LOG_ERR,"Trans money is not a integer!,transmoney=[%f]",rPack->lvol5/100.0);
goto L_RETU;
}
//开始填充流水数据
//流水号
ret=getNewUniqNo(KEYTYPE_TRADESERIAL, &unique);
if(ret)
{
*pRetCode=E_TRANS_UNKNOW_ERROR;
writelog(LOG_ERR,"Create serial_no error,error code=[%d]",ret);
goto L_RETU;
}
tradeserial.serial_no=D2I(unique);
//记录流水号，作为冲正使用
temp_serial_no=tradeserial.serial_no;
tradeserial.other_seri_no=rPack->lvol0; //上传端流水号
tradeserial.serial_type=TXCODE_BANK_SCHOOL; //交易代码
tradeserial.serial_state=SERISTAT_NODEBT; //流水状态
tradeserial.card_id=atoi(rPack->sserial0);
tradeserial.purse_id=0;
tradeserial.in_balance=double((rPack->lvol6)/100.00); //入卡金额
tradeserial.out_balance=tradeserial.in_balance; //出卡金额
tradeserial.trade_count=rPack->lvol1+1; //当前卡中交易次数
ret=get_datetime_from_db(tradeserial.operate_date,tradeserial.operate_time);
if(ret)
{
writelog(LOG_ERR,"get_datetime_from_db error,error code=[%d]",ret);
getsysdate(tradeserial.operate_date);
getsystime(tradeserial.operate_time);
}
Strncpy_t(tradeserial.collect_date,tradeserial.operate_date,sizeof(tradeserial.collect_date)); //采集日期
Strncpy_t(tradeserial.collect_time,tradeserial.operate_time,sizeof(tradeserial.collect_time)); //采集时间
Strncpy_t(tradeserial.enteract_date,logicdate,sizeof(tradeserial.enteract_date)); //入帐日期
Strncpy_t(tradeserial.enteract_time,tradeserial.operate_time,sizeof(tradeserial.enteract_time)); //入帐时间
tradeserial.maindevice_id=GetTransferSystemId(); //子系统号码
tradeserial.device_id=atoi(rPack->sorder2); //终端ID
tradeserial.trade_fee=(rPack->lvol5)/100.0; //转帐金额
Strncpy_t(tradeserial.b_act_id,rPack->scust_auth,sizeof(tradeserial.b_act_id));
tradeserial.sys_id=rPack->lvol2; //表示银行
tradeserial.condition_id=SELF_TRANS; //自动/自助转帐标识
tradeserial.customer_id=card.cosumer_id;
Strncpy_t(tradeserial.oper_code,OPER_SYSTEM_KEY,sizeof(tradeserial.oper_code)); //操作员代码
//判断转帐金额是否超出钱包最大限额
ret=DB_t_aif_account_read_by_card_id_and_purse_id(card.card_id, PURSE_NO_ONE,&tAccount);
if(ret)
{
writelog(LOG_ERR,"DB_t_aif_account_read_by_card_id_and_purse_id ret[%d]card_id[%d]",ret,card.card_id);
if(DB_NOTFOUND==ret)
{
*pRetCode=E_TRANS_SCHACC_NOEXIT;
goto L_RETU;
}
else
{
*pRetCode=E_TRANS_UNKNOW_ERROR;
goto L_RETU;
}
}
ret=GetParameter(GLOBE_MAXCARDBALANCE,sMaxCardBalance);
if(ret)
{
writelog(LOG_ERR,"GetParameter GLOBE_MAXCARDBALANCE error,errcode=[%d]",ret);
*pRetCode=E_TRANS_UNKNOW_ERROR;
goto L_RETU;
}
dMaxCardBalance=atof(sMaxCardBalance);
if(amtcmp(tAccount.cur_bala+tradeserial.trade_fee,dMaxCardBalance)>0)
{
*pRetCode=E_TRANS_TRANSMONEY_OUTRANGE;
goto L_RETU;
}
//读取客户收费类别字段
ret=DB_t_cif_customer_read_lock_by_cur_and_cut_id(card.cosumer_id, &tCustomer);
if(ret)
{
writelog(LOG_ERR,"cut_id[%d]",card.cosumer_id);
if(DB_NOTFOUND==ret)
{
*pRetCode=E_TRANS_UNKNOW_ERROR;
goto L_RETU;
}
else
{
*pRetCode=E_TRANS_UNKNOW_ERROR;
goto L_RETU;
}
}
if(0==tCustomer.fee_type)
{
ret=DB_t_pif_spefee_read_by_dept_code_and_cut_type(tCustomer.classdept_no, tCustomer.cut_type,&tSpeFee);
if(ret)
{
if(DB_NOTFOUND==ret)
{
tCustomer.fee_type=tCustomer.cut_type;
}
else
{
DB_t_cif_customer_free_lock_cur();
writelog(LOG_ERR,"DB_t_pif_spefee_read_by_dept_code_and_cut_type error,errcode=[%d]",ret);
*pRetCode=E_TRANS_UNKNOW_ERROR;
goto L_RETU;
}
}
else
{
tCustomer.fee_type=tSpeFee.fee_type;
}
}
DB_t_cif_customer_free_lock_cur();
//记录流水数据，用于提供正确的流水号，以及银行业务不成功供查询
ret=DB_t_tif_tradeserial_add(&tradeserial);
if(ret)
{
*pRetCode=E_TRANS_UNKNOW_ERROR;
writelog(LOG_ERR,"Insert t_tif_tradeserial table error,error code=[%d]",ret);
goto L_RETU;
}
ret=db_commit();
if(ret)
{
*pRetCode=E_DB_COMMIT;
writelog(LOG_ERR,"db_commit error,error code=[%d]",ret);
goto L_RETU;
}
//填写入账结构,问问闻剑
memset(&IA,0,sizeof(IA));
des2src(IA.sArrInActno[0],tAccount.account_id); //贷方帐户,持卡人账户
des2src(IA.sArrInActno[2],rPack->sstation0); //借方帐号，由前置机上传
switch (rPack->lvol3)
{
case 4:
IA.iArrInFeeSwitch[1] = 1;
break;
case 5:
IA.iArrInFeeSwitch[1] = 0;
break;
default:
break;
}
IA.iCardNo=card.card_id;
IA.iFeeType=tCustomer.fee_type;
IA.dArrInAmt[0]=tradeserial.trade_fee;
writelog(LOG_ERR,"借方帐号=[%d]",atoi(rPack->sstation0));
ret=process(&IA,&tradeserial);
if(ret)
{
writelog(LOG_ERR,"process err,errcode[%d]",ret);
*pRetCode=E_TRANS_UNKNOW_ERROR;
goto L_RETU;
}
sprintf(sDebugMsg,"流水号:%d ",IA.iSerialNo);
for(i=1;i<=IA.iOutTxTypeCnt;i++)
{
switch(IA.iArrOutTxType[i])
{
case TXTYPE_TOLL_DEPOSIT:
case TXTYPE_DEDUCT_DEPOSIT:
case TXTYPE_RETURN_DEPOSIT:
tradeserial.deposit_fee=IA.dArrOutAmt[i];
break;
case TXTYPE_PRE_TOLL_BOARD:
case TXTYPE_TOLL_BOARD:
case TXTYPE_DEDUCT_BOARD:
case TXTYPE_RETURN_BOARD:
case TXTYPE_BANK_PRE_TOLL_BOARD:
tradeserial.boardfee=IA.dArrOutAmt[i];
break;
case TXTYPE_TOLL_CHARGE:
tradeserial.in_fee=IA.dArrOutAmt[i];
break;
case TXTYPE_BANK_TRANSFER:
trans_amt=IA.dArrOutAmt[i];
break;
default:
break;
}
if(amtcmp(IA.dArrOutAmt[i],0)!=0)
{
sprintf(sMsg,"%s:%.2lf元 ",IA.sArrOutTxName[i],IA.dArrOutAmt[i]);
strcat(sDebugMsg,sMsg);
}
}
sprintf(sMsg,"充值前卡余额:%.2lf 转帐后卡余额:%.2lf ",IA.dInCardBala,IA.dOutCardBala);
strcat(sDebugMsg,sMsg);
writelog(LOG_DEBUG,sDebugMsg);
out_pack->damt0=tradeserial.out_balance;
out_pack->damt1=tradeserial.trade_fee;
out_pack->damt2=tradeserial.boardfee;
out_pack->lvol1=tradeserial.serial_no;
out_pack->lvol2=D2I(tradeserial.out_balance*100.0);
des2src(out_pack->semp_no, tradeserial.operate_date);
des2src(out_pack->sbank_code, tradeserial.operate_time);
PutRow(handle,out_pack,pRetCode,szMsg);
//业务结束后，回滚事务
ret=db_rollback();
if(ret)
{
*pRetCode=E_DB_ROLLBACK;
writelog(LOG_ERR,"db_rollback error,error code=[%d]",ret);
goto L_RETU;
}
return 0;
L_RETU:
return -1;
}
//查询校园卡转帐流水
int Pos_QuerySerial(INNER_TRANS_REQUEST * pNode,TRUSERID *handle,int *pRetCode,char *szMsg)
{
char key[32+1]="";
char pwd[32+1]="";
//char account_id[16+1]="";
char account_pwd[6+1]="";
int ret=0;
int cnt=0;
//double unique=0.0;
INNER_TRANS_REQUEST from_pos;
T_t_tif_tradeserial tradeserial; //卡操作流水表
T_t_aif_account account;
T_t_pif_card card;
ST_CPACK aPack;
ST_PACK *out_pack = &(aPack.pack);
memset(&from_pos,0,sizeof(from_pos));
memset(&account,0,sizeof(account));
memset(&card,0,sizeof(card));
memcpy(&from_pos,pNode,sizeof(from_pos));
//判断设备是否登陆
if(0!=device_login_yes_or_no(atoi(from_pos.TerminalId)))
{
writelog(LOG_ERR,"Device don't login");
return E_TRANS_TERM_NOLOGIN;
}
ret=DB_t_pif_card_read_by_card_id(atoi(from_pos.CardNo),&card);
if(ret)
{
writelog(LOG_ERR,"DB_t_pif_card_read_lock_by_cur_and_card_id error,errcode=[%d]",ret);
//sprintf(pNode->RetCode,"%d",E_TRANS_UNKNOW_ERROR);
return E_TRANS_SCHACC_NOEXIT;
}
strcpy(key,STATIC_SEED_KEY);
Strncpy_t(account_pwd, from_pos.AccountPwd,sizeof(account_pwd));
EncodePwd(key,account_pwd,pwd, 0);
//判断卡密码是否正确
if(0!=memcmp(pwd,card.password,sizeof(pwd)))
{
writelog(LOG_ERR,"Card password error,clear_pwd[%s],input_pwd=[%s],db_pwd=[%s]",account_pwd,pwd,card.password);
//sprintf(pNode->RetCode,"%d",E_TRANS_SCHCARD_PWDERR);
return E_TRANS_SCHCARD_PWDERR;
}
if(strncmp(card.state_id,TYPE_YES,1)!=0)
{
DB_t_pif_card_free_lock_by_cur();
writelog(LOG_ERR,"card_state=[%s]",card.state_id);
return E_TRANS_SCHACC_DESTORY;
}
if(STATE_TRUE==card.state_id[CARDSTAT_TYPE_LOST])
{
DB_t_pif_card_free_lock_by_cur();
writelog(LOG_ERR,"card_state=[%s]",card.state_id);
return E_TRANS_SCHCARD_LOSTING;
}
if(STATE_TRUE==card.state_id[CARDSTAT_TYPE_FREEZE])
{
DB_t_pif_card_free_lock_by_cur();
writelog(LOG_ERR,"card_state=[%s]",card.state_id);
return E_TRANS_SCHCARD_FREEZE;
}
ret=DB_t_tif_tradeserial_open_select_by_cur3_and_serial_type_and_card_id(TRADE_INNER_TRANS,card.card_id);
if(ret)
{
db_chk_err(__FILE__,__LINE__,&sqlca);
writelog(LOG_ALERT,"declare cursor err sqlcode[%d]",ret);
return E_TRANS_UNKNOW_ERROR;
}
SetCol(handle,0);
SetCol(handle,F_SCLOSE_EMP,F_SORDER0,F_SORDER1,F_SSERIAL1,F_LVOL0,F_LVOL1,F_SDATE0,F_STIME0,F_SDATE1,F_STIME1,F_SCUST_NO,F_SCHANGE_EMP,F_SSERIAL0,F_LVOL2,F_SCUST_AUTH,F_SSTATUS1,F_SEMP_PWD,F_SEMP_PWD2,F_SSTATION0,F_SSTATION1,F_SORDER2,0);
while(1)
{
ret=DB_t_tif_tradeserial_fetch_select_by_cur3(&tradeserial);
if(ret)
{
DB_t_tif_tradeserial_close_select_by_cur3();
if(ret==DB_NOTFOUND)
{
if(cnt==0)
{
writelog(LOG_DEBUG,"There havn't record from t_tif_tradeserial table!");
break;
}
else break;
}
else
return E_TRANS_UNKNOW_ERROR;
}
cnt++;
memcpy(from_pos.TradeDate,tradeserial.operate_date,sizeof(from_pos.TradeDate));
memcpy(from_pos.TradeTime,tradeserial.operate_time,sizeof(from_pos.TradeTime));
sprintf(from_pos.CardNo,"%d",tradeserial.card_id);
memcpy(from_pos.BankCardNo,tradeserial.b_act_id,sizeof(from_pos.BankCardNo));
sprintf(from_pos.TransMoney,"%d",int(tradeserial.trade_fee)*100);
if(tradeserial.serial_state!=2)
{
sprintf(from_pos.RetCode,"%s","失败");
}
else sprintf(from_pos.RetCode,"%s","成功");
//开始返回应答包
Strncpy_t(out_pack->sclose_emp,from_pos.TradeCode,sizeof(out_pack->sclose_emp));
Strncpy_t(out_pack->sorder0,from_pos.TransMoney,sizeof(out_pack->sorder0));
Strncpy_t(out_pack->sorder1,from_pos.ExtraMoney,sizeof(out_pack->sorder1));
Strncpy_t(out_pack->sserial1,from_pos.AccountMoney,sizeof(out_pack->sserial1));
out_pack->lvol0=from_pos.SendNo;
out_pack->lvol1=from_pos.RecvNo;
memcpy(out_pack->sdate0,from_pos.TradeDate,sizeof(from_pos.TradeDate));
memcpy(out_pack->stime0,from_pos.TradeTime,sizeof(from_pos.TradeTime));
memcpy(out_pack->sdate1,from_pos.BankDate,sizeof(from_pos.BankDate));
memcpy(out_pack->stime1,from_pos.BankTime,sizeof(from_pos.BankTime));
Strncpy_t(out_pack->scust_no,from_pos.Balance,sizeof(out_pack->scust_no));
Strncpy_t(out_pack->schange_emp,from_pos.RetCode,sizeof(out_pack->schange_emp));
Strncpy_t(out_pack->sserial0,from_pos.CardNo,sizeof(out_pack->sserial0));
out_pack->lvol2=from_pos.Notecase;
Strncpy_t(out_pack->scust_auth,from_pos.BankCardNo,sizeof(out_pack->scust_auth));
sprintf(out_pack->sstatus1,"%c",from_pos.MngFeeFlag);
Strncpy_t(out_pack->semp_pwd,from_pos.AccountPwd,sizeof(out_pack->semp_pwd));
Strncpy_t(out_pack->semp_pwd2,from_pos.AccountNewPwd,sizeof(out_pack->semp_pwd2));
Strncpy_t(out_pack->sstation0,from_pos.BankCardPwd,sizeof(out_pack->sstation0));
Strncpy_t(out_pack->sstation1,from_pos.BankCardNewPwd,sizeof(out_pack->sstation1));
Strncpy_t(out_pack->sorder2,from_pos.TerminalId,sizeof(out_pack->sorder2));
// printf("LINE:%d\n",__LINE__);
PutRow(handle,out_pack,pRetCode,szMsg);
if(cnt>=10)
{
DB_t_tif_tradeserial_close_select_by_cur3();
break;
}
}
// printf("LINE:%d\n",__LINE__);
T_t_tif_tradeserial_his tradeserial_his;
memset(&tradeserial_his,0,sizeof(tradeserial_his));
if(cnt<10)
{
ret=DB_t_tif_tradeserial_his_open_select_by_cur1_and_serial_type_and_card_id(TRADE_INNER_TRANS,card.card_id);
if(ret)
{
db_chk_err(__FILE__,__LINE__,&sqlca);
writelog(LOG_ALERT,"declare cursor err sqlcode[%d]",ret);
return E_TRANS_UNKNOW_ERROR;
}
// printf("LINE:%d\n",__LINE__);
while(1)
{
ret=DB_t_tif_tradeserial_his_fetch_select_by_cur1(&tradeserial_his);
if(ret)
{
DB_t_tif_tradeserial_his_close_select_by_cur1();
if(ret==DB_NOTFOUND)
{
writelog(LOG_DEBUG,"There havn't record from t_tif_tradeserial_his table!");
break;
}
else
return E_TRANS_UNKNOW_ERROR;
}
cnt++;
memcpy(from_pos.TradeDate,tradeserial_his.operate_date,sizeof(from_pos.TradeDate));
memcpy(from_pos.TradeTime,tradeserial_his.operate_time,sizeof(from_pos.TradeTime));
sprintf(from_pos.CardNo,"%d",tradeserial_his.card_id);
memcpy(from_pos.BankCardNo,tradeserial_his.b_act_id,sizeof(from_pos.BankCardNo));
sprintf(from_pos.TransMoney,"%d",int(tradeserial_his.trade_fee)*100);
if(tradeserial_his.serial_state!=2)
{
sprintf(from_pos.RetCode,"%s","失败");
}
else sprintf(from_pos.RetCode,"%s","成功");
//开始返回应答包
Strncpy_t(out_pack->sclose_emp,from_pos.TradeCode,sizeof(out_pack->sclose_emp));
Strncpy_t(out_pack->sorder0,from_pos.TransMoney,sizeof(out_pack->sorder0));
Strncpy_t(out_pack->sorder1,from_pos.ExtraMoney,sizeof(out_pack->sorder1));
Strncpy_t(out_pack->sserial1,from_pos.AccountMoney,sizeof(out_pack->sserial1));
out_pack->lvol0=from_pos.SendNo;
out_pack->lvol1=from_pos.RecvNo;
Strncpy_t(out_pack->sdate0,from_pos.TradeDate,sizeof(out_pack->sdate0));
Strncpy_t(out_pack->stime0,from_pos.TradeTime,sizeof(out_pack->stime0));
Strncpy_t(out_pack->sdate1,from_pos.BankDate,sizeof(out_pack->sdate1));
Strncpy_t(out_pack->stime1,from_pos.BankTime,sizeof(out_pack->stime1));
Strncpy_t(out_pack->scust_no,from_pos.Balance,sizeof(out_pack->scust_no));
Strncpy_t(out_pack->schange_emp,from_pos.RetCode,sizeof(out_pack->schange_emp));
Strncpy_t(out_pack->sserial0,from_pos.CardNo,sizeof(out_pack->sserial0));
out_pack->lvol2=from_pos.Notecase;
Strncpy_t(out_pack->scust_auth,from_pos.BankCardNo,sizeof(out_pack->scust_auth));
sprintf(out_pack->sstatus1,"%c",from_pos.MngFeeFlag);
Strncpy_t(out_pack->semp_pwd,from_pos.AccountPwd,sizeof(out_pack->semp_pwd));
Strncpy_t(out_pack->semp_pwd2,from_pos.AccountNewPwd,sizeof(out_pack->semp_pwd2));
Strncpy_t(out_pack->sstation0,from_pos.BankCardPwd,sizeof(out_pack->sstation0));
Strncpy_t(out_pack->sstation1,from_pos.BankCardNewPwd,sizeof(out_pack->sstation1));
Strncpy_t(out_pack->sorder2,from_pos.TerminalId,sizeof(out_pack->sorder2));
PutRow(handle,out_pack,pRetCode,szMsg);
if(cnt>=10)
{
DB_t_tif_tradeserial_his_close_select_by_cur1();
break;
}
}
}
writelog(LOG_INFO,"query trans record succeed!");
return 0;
}
int F900077(TRUSERID *handle,int iRequest,ST_PACK *in_pack,int *pRetCode,char *szMsg)
{
int ret=0;
char tradecode[6+1]="";
// 此处检查银行登陆状态,可能过于严格,可转移到switch中需要银行登陆的功能中
if(!BANK_LOGIN)
{
*pRetCode=E_TRANS_BANK_NETERR;
return *pRetCode;
}
INNER_TRANS_REQUEST from_pos,to_pos;
//BANK_TRANS_REQUEST from_bank;
ST_CPACK aPack;
ST_PACK *out_pack = &(aPack.pack);
// 用于根据请求包整理本CPACK包的头清空包头位图和包体中的数据
ResetNormalCPack(&aPack,0,1);
//初始化交换结构
memset(&from_pos,0,sizeof(from_pos));
//从输入cpack中提取数据，填充到通用交换数据结构中
memcpy(from_pos.TradeCode,in_pack->sclose_emp,sizeof(from_pos.TradeCode)); //交易代码
memcpy(from_pos.TransMoney,in_pack->sorder0,sizeof(from_pos.TransMoney)); //交易金额
memcpy(from_pos.ExtraMoney,in_pack->sorder1,sizeof(from_pos.ExtraMoney)); //附加交易金额
Strncpy_t(from_pos.AccountMoney,in_pack->sserial1,sizeof(from_pos.AccountMoney)); //校园卡帐户金额
from_pos.SendNo=in_pack->lvol0; //发起方流水号
from_pos.RecvNo=in_pack->lvol1; //接受方流水号
memcpy(from_pos.TradeDate,in_pack->sdate0,sizeof(from_pos.TradeDate)); //交易日期 YYYYMMDD
memcpy(from_pos.TradeTime,in_pack->stime0,sizeof(from_pos.TradeTime)); //交易时间 HHMMSS
memcpy(from_pos.BankDate,in_pack->sdate1,sizeof(from_pos.BankDate)); //银行处理日期
memcpy(from_pos.BankTime,in_pack->stime1,sizeof(from_pos.BankTime)); //银行处理时间
memcpy(from_pos.Balance,in_pack->scust_no,sizeof(from_pos.Balance)); //银行卡余额
memcpy(from_pos.RetCode,in_pack->schange_emp,sizeof(from_pos.RetCode)); //交易结果
memcpy(from_pos.CardNo,in_pack->sserial0,sizeof(from_pos.CardNo)); //校园卡卡号
from_pos.Notecase=in_pack->lvol2; //校园卡对应钱包号
memcpy(from_pos.BankCardNo,in_pack->scust_auth,sizeof(from_pos.BankCardNo)); //银行卡号
from_pos.MngFeeFlag=atoi(in_pack->sstatus1); //手续费标志
memcpy(from_pos.AccountPwd,in_pack->semp_pwd,sizeof(from_pos.AccountPwd)); //校园账户密码
memcpy(from_pos.AccountNewPwd,in_pack->semp_pwd2,sizeof(from_pos.AccountNewPwd)); //校园账户新密码
memcpy(from_pos.BankCardPwd,in_pack->sstation0,sizeof(from_pos.BankCardPwd)); //银行账户密码
memcpy(from_pos.BankCardNewPwd,in_pack->sstation1,sizeof(from_pos.BankCardNewPwd)); //银行账户新密码
memcpy(from_pos.TerminalId,in_pack->sorder2,sizeof(from_pos.TerminalId)); //终端编号
//判断交易代码，进行相应处理
//switch(241031)
//int temp=atoi(from_pos.TradeCode);
//printf("this is test record:atoi(from_pos.TradeCode)=[%d]\n",temp);
SetCol(handle,0);
SetCol(handle,F_SCLOSE_EMP,F_SORDER0,F_SORDER1,F_SSERIAL1,F_LVOL0,F_LVOL1,F_SDATE0,F_STIME0,F_SDATE1,F_STIME1,F_SCUST_NO,F_SCHANGE_EMP,F_SSERIAL0,F_LVOL2,F_SCUST_AUTH,F_SSTATUS1,F_SEMP_PWD,F_SEMP_PWD2,F_SSTATION0,F_SSTATION1,F_SORDER2,0);
memcpy(tradecode,from_pos.TradeCode,sizeof(from_pos.TradeCode));
tradecode[6]=0;
writelog(LOG_INFO,"Trade start,trade code=[%6.6s],card_id=[%s],bankcardno=[%s],TerminalId=[%s]!",tradecode,from_pos.CardNo,from_pos.BankCardNo,from_pos.TerminalId);
switch(atoi(tradecode))
{
case TRADE_INNER_QUERYBANK:
ret=Pos_QueryBank(&from_pos);
if(ret)
{
*pRetCode=ret;
goto L_RETU;
}
memcpy(&to_pos,&from_pos,sizeof(to_pos));
break;
case TRADE_INNER_TRANS:
ret=Pos_Transfer(&from_pos);
if(ret)
{
*pRetCode=ret;
goto L_RETU;
}
memcpy(&to_pos,&from_pos,sizeof(to_pos));
break;
case TRADE_INNER_FEE:
ret=Pos_Fee(&from_pos);
if(ret)
{
*pRetCode=ret;
goto L_RETU;
}
memcpy(&to_pos,&from_pos,sizeof(to_pos));
break;
case TRADE_INNER_ADDRELATION:
ret=Pos_AddRelation(&from_pos);
if(ret)
{
*pRetCode=ret;
goto L_RETU;
}
memcpy(&to_pos,&from_pos,sizeof(to_pos));
break;
case TRADE_INNER_DELRELATION:
ret=Pos_DelRelation(&from_pos);
if(ret)
{
*pRetCode=ret;
goto L_RETU;
}
memcpy(&to_pos,&from_pos,sizeof(to_pos));
break;
case TRADE_INNER_POSLOGIN:
ret=Pos_Login(&from_pos);
if(ret)
{
*pRetCode=ret;
goto L_RETU;
}
memcpy(&to_pos,&from_pos,sizeof(to_pos));
break;
case TRADE_INNER_QUERYINNER:
ret=Pos_QuerySchool(&from_pos);
if(ret)
{
*pRetCode=ret;
goto L_RETU;
}
memcpy(&to_pos,&from_pos,sizeof(to_pos));
break;
case TRADE_INNER_CHANGEPWD:
ret=Pos_ChangePwd(&from_pos);
if(ret)
{
*pRetCode=ret;
goto L_RETU;
}
memcpy(&to_pos,&from_pos,sizeof(to_pos));
break;
case TRADE_INNER_LOST:
ret=Pos_LostCard(&from_pos);
if(ret)
{
*pRetCode=ret;
goto L_RETU;
}
memcpy(&to_pos,&from_pos,sizeof(to_pos));
break;
case TRADE_INNER_UNLOST:
ret=Pos_UnlostCard(&from_pos);
if(ret)
{
*pRetCode=ret;
goto L_RETU;
}
memcpy(&to_pos,&from_pos,sizeof(to_pos));
break;
case TRADE_INNER_QUERYSERIAL:
ret=Pos_QuerySerial(&from_pos,handle,pRetCode,szMsg);
if(ret)
{
*pRetCode=ret;
goto L_RETU;
}
return 0;
case TRADE_INNER_WRITEERRCARD:
ret=Pos_WriteErrCard(&from_pos);
if(ret)
{
*pRetCode=ret;
goto L_RETU;
}
break;
//前台发起部分，包括签到、签退、对帐等
case TRADE_INNER_LOGIN:
writelog(LOG_ERR,"start inner login!");
break;
//查询补助信息
case TRADE_INNER_QUERYSUBSIDY:
ret=query_subsidy(in_pack,handle,pRetCode,szMsg);
if(ret)
{
*pRetCode=ret;
goto L_RETU;
}
return 0;
//领取补助
case TRADE_INNER_GETSUBSIDY:
ret=get_subsidy(in_pack,handle,pRetCode,szMsg);
if(ret)
{
*pRetCode=ret;
goto L_RETU;
}
return 0;
default:
writelog(LOG_INFO,"This trade can't supplied,tradecode=[%d]!",atoi(tradecode));
*pRetCode=E_TRANS_FUNC_NONSUPPORT;
goto L_RETU;
}
Strncpy_t(out_pack->sclose_emp,to_pos.TradeCode,sizeof(out_pack->sclose_emp));
Strncpy_t(out_pack->sorder0,to_pos.TransMoney,sizeof(out_pack->sorder0));
Strncpy_t(out_pack->sorder1,to_pos.ExtraMoney,sizeof(out_pack->sorder1));
Strncpy_t(out_pack->sserial1,to_pos.AccountMoney,sizeof(out_pack->sserial1));
out_pack->lvol0=to_pos.SendNo;
out_pack->lvol1=to_pos.RecvNo;
Strncpy_t(out_pack->sdate0,to_pos.TradeDate,sizeof(out_pack->sdate0));
Strncpy_t(out_pack->stime0,to_pos.TradeTime,sizeof(out_pack->stime0));
Strncpy_t(out_pack->sdate1,to_pos.BankDate,sizeof(out_pack->sdate1));
Strncpy_t(out_pack->stime1,to_pos.BankTime,sizeof(out_pack->stime1));
Strncpy_t(out_pack->scust_no,to_pos.Balance,sizeof(out_pack->scust_no));
Strncpy_t(out_pack->schange_emp,to_pos.RetCode,sizeof(out_pack->schange_emp));
Strncpy_t(out_pack->sserial0,to_pos.CardNo,sizeof(out_pack->sserial0));
out_pack->lvol2=to_pos.Notecase;
Strncpy_t(out_pack->scust_auth,to_pos.BankCardNo,sizeof(out_pack->scust_auth));
sprintf(out_pack->sstatus1,"%c",to_pos.MngFeeFlag);
Strncpy_t(out_pack->semp_pwd,to_pos.AccountPwd,sizeof(out_pack->semp_pwd));
Strncpy_t(out_pack->semp_pwd2,to_pos.AccountNewPwd,sizeof(out_pack->semp_pwd2));
Strncpy_t(out_pack->sstation0,to_pos.BankCardPwd,sizeof(out_pack->sstation0));
Strncpy_t(out_pack->sstation1,to_pos.BankCardNewPwd,sizeof(out_pack->sstation1));
Strncpy_t(out_pack->sorder2,to_pos.TerminalId,sizeof(out_pack->sorder2));
PutRow(handle,out_pack,pRetCode,szMsg);
writelog(LOG_INFO,"Trade succeed,trade code=[%6.6s]!",to_pos.TradeCode);
return 0;
L_RETU:
//writelog(LOG_ERR,"Trade faild,trade code=[%s],return code=[%d]!",to_pos.TradeCode,*pRetCode);
return *pRetCode;
L_RET_BANK_NOT_LOGIN:
writelog(LOG_ERR,"Trade faild,trade code=[%s],return code=[%d]!",to_pos.TradeCode,*pRetCode);
*pRetCode=E_TRANS_BANK_NETERR;
return *pRetCode;
}
int F900088(TRUSERID *handle,int iRequest,ST_PACK *in_pack,int *pRetCode,char *szMsg)
{
char hi_operator[10+1];
char szNull[] ="";
int ret=0;
// 解析操作员代码
Strncpy_t(hi_operator, in_pack->scust_no, sizeof(hi_operator));
// 输入参数检查
trim(hi_operator);
if (strcmp (szNull,hi_operator) == 0)
{
*pRetCode=E_INPUT_NOOPERATOR;
writelog(LOG_ERR,"hi_operator,hi_operator[%s]errcode[%d]!",hi_operator,E_INPUT_NOOPERATOR);
goto L_RETU;
}
//停止入帐，改数据库全局参数表中的入帐标志
ret=StopInBalance();
if(ret)
{
writelog(LOG_ERR,"修改日结标志出错!");
return ret;
}
//生成运行情况报表
ret=CreateActiveReport();
if(ret)
{
writelog(LOG_ERR,"生成运行情况报表出错!");
return ret;
}
//生成操作情况报表
ret=CreateOperReport();
if(ret)
{
writelog(LOG_ERR,"生成操作情况表失败!");
return ret;
}
//生成普通商户结算报表
ret=CreateShopReport();
if(ret)
{
writelog(LOG_ERR,"生成商户结算报表失败!");
return ret;
}
//生成资产负债报表
ret=CreateRichDebtReport();
if(ret)
{
writelog(LOG_ERR,"生成资产负债表失败!");
return ret;
}
//手动结帐结束，启动服务，接收新的入帐流水
ret=Startup();
if(ret)
{
writelog(LOG_ERR,"系统启动服务失败!");
return ret;
}
writelog(LOG_ERR,"Manual balance is succeed![%d]",ret);
//ERR_DEAL("结帐成功完成!",ret);
return 0;
L_RETU:
return *pRetCode;
}
