void AmplifyDialog::OnAmpSlider(wxCommandEvent & event)
{
if (mLoopDetect)
return;
mLoopDetect = true;
wxString str;
double dB = GetAmpSlider()->GetValue() / 10.0;
ratio = pow(10.0,TrapDouble(dB, AMP_MIN, AMP_MAX)/20.0);
double dB2 = (GetAmpSlider()->GetValue()-1) / 10.0;
double ratio2 = pow(10.0,TrapDouble(dB2, AMP_MIN, AMP_MAX)/20.0);
if (!GetClipCheckBox()->GetValue() &&
ratio * peak > 1.0 &&
ratio2 * peak < 1.0)
ratio = 1.0 / peak;
str.Printf(wxT("%.1f"), 20*log10(ratio));
GetAmpText()->SetValue(str);
str.Printf(wxT("%.1f"), 20*log10(ratio*peak));
GetPeakText()->SetValue(str);
mLoopDetect = false;
CheckClip();
}
bool ToneGenDialog::TransferDataFromWindow()
{
wxTextCtrl *t;
t = GetAmpText();
if (t) {
double d;
t->GetValue().ToDouble(&d);
amplitude = TrapDouble(d, AMP_MIN, AMP_MAX);
}
t = GetFreqText();
if (t) {
double d;
t->GetValue().ToDouble(&d);
frequency = TrapDouble(d, FREQ_MIN, FREQ_MAX);
}
wxChoice *c = GetWaveformChoice();
if (c)
waveform = TrapLong(c->GetSelection(), WAVEFORM_MIN, WAVEFORM_MAX);
wxCheckBox *cb = GetMixChoice();
if (cb)
mix = cb->GetValue();
return TRUE;
}
bool ToneGenDialog::TransferDataFromWindow()
{
ShuttleGui S( this, eIsGettingFromDialog );
PopulateOrExchange( S );
amplitude[0] = TrapDouble(amplitude[0], AMP_MIN, AMP_MAX);
frequency[0] = TrapDouble(frequency[0], FREQ_MIN, FREQ_MAX);
amplitude[1] = TrapDouble(amplitude[1], AMP_MIN, AMP_MAX);
frequency[1] = TrapDouble(frequency[1], FREQ_MIN, FREQ_MAX);
return true;
}
bool ToneGenDialog::TransferDataFromWindow()
{
EffectDialog::TransferDataFromWindow();
amplitude[0] = TrapDouble(amplitude[0], AMP_MIN, AMP_MAX);
frequency[0] = TrapDouble(frequency[0], FREQ_MIN, (float)(GetActiveProject()->GetRate())/2.);
amplitude[1] = TrapDouble(amplitude[1], AMP_MIN, AMP_MAX);
frequency[1] = TrapDouble(frequency[1], FREQ_MIN, (float)(GetActiveProject()->GetRate())/2.);
// Must handle this ourselves since ShuttleGui doesn't know about it
mDuration = mToneDurationT->GetTimeValue();
return true;
}
bool AmplifyDialog::TransferDataToWindow()
{
wxSlider *slider;
// limit range of gain
double dB = TrapDouble(200*log10(ratio), AMP_MIN, AMP_MAX)/10.0;
ratio = pow(10.0, dB/20.0);
slider = GetAmpSlider();
if (slider)
slider->SetValue((int)(200*log10(ratio)+0.5));
mLoopDetect = true;
wxTextCtrl *text = GetAmpText();
if (text) {
wxString str;
str.Printf(wxT("%.1f"), 20*log10(ratio));
text->SetValue(str);
}
text = GetPeakText();
if (text) {
wxString str;
str.Printf(wxT("%.1f"), 20*log10(ratio*peak));
text->SetValue(str);
}
mLoopDetect = false;
return TRUE;
}
void AmplifyDialog::OnAmpText(wxCommandEvent & event)
{
if (mLoopDetect)
return;
wxTextCtrl *c = GetAmpText();
if (c) {
double r;
mLoopDetect = true;
wxString val = c->GetValue();
val.ToDouble(&r);
ratio = pow(10.0,TrapDouble(r*10, AMP_MIN, AMP_MAX)/200.0);
wxSlider *slider = GetAmpSlider();
if (slider)
slider->SetValue((int)(200*log10(ratio)+0.5));
wxString str;
if( ratio*peak > 0.0 )
str.Printf(wxT("%.1f"), 20*log10(ratio*peak));
else
str = _("-Infinity"); // the case when the waveform is all zero
GetPeakText()->SetValue(str);
mLoopDetect = false;
}
CheckClip();
}
bool EffectToneGen::SetAutomationParameters(EffectAutomationParameters & parms)
{
ReadAndVerifyEnum(Waveform, mWaveforms);
ReadAndVerifyEnum(Interp, mInterpolations);
if (mChirp)
{
ReadAndVerifyDouble(StartFreq);
ReadAndVerifyDouble(EndFreq);
ReadAndVerifyDouble(StartAmp);
ReadAndVerifyDouble(EndAmp);
mFrequency[0] = StartFreq;
mFrequency[1] = EndFreq;
mAmplitude[0] = StartAmp;
mAmplitude[1] = EndAmp;
}
else
{
ReadAndVerifyDouble(Frequency);
ReadAndVerifyDouble(Amplitude);
mFrequency[0] = Frequency;
mFrequency[1] = Frequency;
mAmplitude[0] = Amplitude;
mAmplitude[1] = Amplitude;
}
mWaveform = Waveform;
mInterpolation = Interp;
double freqMax = (GetActiveProject() ? GetActiveProject()->GetRate() : 44100.0) / 2.0;
mFrequency[1] = TrapDouble(mFrequency[1], MIN_EndFreq, freqMax);
return true;
}
void AmplifyDialog::OnPeakText(wxCommandEvent & event)
{
if (mLoopDetect)
return;
wxTextCtrl *c = GetPeakText();
if (c) {
double r;
mLoopDetect = true;
wxString val = c->GetValue();
val.ToDouble(&r);
ratio = pow(10.0, r/20.0) / peak;
double dB = TrapDouble(200*log10(ratio), AMP_MIN, AMP_MAX)/10.0;
ratio = pow(10.0, dB/20.0);
wxSlider *slider = GetAmpSlider();
if (slider)
slider->SetValue((int)(10*dB+0.5));
wxString str;
str.Printf(wxT("%.1f"), dB);
GetAmpText()->SetValue(str);
mLoopDetect = false;
}
CheckClip();
}
void AmplifyDialog::OnAmpText(wxCommandEvent & event)
{
if (mLoopDetect)
return;
wxTextCtrl *c = GetAmpText();
if (c) {
double r;
mLoopDetect = true;
wxString val = c->GetValue();
val.ToDouble(&r);
ratio = pow(10,TrapDouble(r*10, AMP_MIN, AMP_MAX)/200.0);
wxSlider *slider = GetAmpSlider();
if (slider)
slider->SetValue((int)(200*log10(ratio)+0.5));
wxString str;
str.Printf("%.1f", 20*log10(ratio*peak));
GetPeakText()->SetValue(str);
mLoopDetect = false;
}
CheckClip();
}
void BassTrebleDialog::OnLevelText(wxCommandEvent & WXUNUSED(event))
{
double val;
mLevelT->GetValue().ToDouble(&val);
int newval = floor(val / 0.1 + 0.5);
mLevelS->SetValue(TrapDouble(newval, LEVEL_MIN, LEVEL_MAX));
UpdateUI();
}
bool NoiseDialog::TransferDataFromWindow()
{
ShuttleGui S( this, eIsGettingFromDialog );
PopulateOrExchange( S );
nAmplitude = TrapDouble(nAmplitude, AMP_MIN, AMP_MAX);
return true;
}
bool DtmfDialog::TransferDataFromWindow()
{
EffectDialog::TransferDataFromWindow();
dAmplitude = TrapDouble(dAmplitude, AMP_MIN, AMP_MAX);
// recalculate to make sure all values are up-to-date. This is especially
// important if the user did not change any values in the dialog
Recalculate();
return true;
}
bool NoiseDialog::TransferDataFromWindow()
{
EffectDialog::TransferDataFromWindow();
nAmplitude = TrapDouble(nAmplitude, AMP_MIN, AMP_MAX);
// Must handle this ourselves since ShuttleGui doesn't know about it
nDuration = mNoiseDurationT->GetTimeValue();
return true;
}
bool AmplifyDialog::TransferDataFromWindow()
{
wxString val = mAmpT->GetValue();
double r;
val.ToDouble(&r);
ratio = pow(10.0,TrapDouble(r*10, AMP_MIN, AMP_MAX)/200.0);
noclip = !mClip->GetValue();
return true;
}
void EffectAmplify::OnAmpSlider(wxCommandEvent & evt)
{
double dB = evt.GetInt() / SCL_Amp;
mRatio = DB_TO_LINEAR(TrapDouble(dB, MIN_Amp, MAX_Amp));
double dB2 = (evt.GetInt() - 1) / SCL_Amp;
double ratio2 = DB_TO_LINEAR(TrapDouble(dB2, MIN_Amp, MAX_Amp));
if (!mClip->GetValue() && mRatio * mPeak > 1.0 && ratio2 * mPeak < 1.0)
{
mRatio = 1.0 / mPeak;
}
mAmp = LINEAR_TO_DB(mRatio);
mAmpT->GetValidator()->TransferToWindow();
mNewPeak = LINEAR_TO_DB(mRatio * mPeak);
mNewPeakT->GetValidator()->TransferToWindow();
CheckClip();
}
bool WahwahDialog::TransferDataFromWindow()
{
wxTextCtrl *c;
long x;
c = GetFreqText();
if (c) {
double d;
c->GetValue().ToDouble(&d);
freq = TrapDouble(d * 10, FREQ_MIN, FREQ_MAX) / 10;
}
c = GetFreqOffText();
if (c) {
double d;
c->GetValue().ToDouble(&d);
freqoff = TrapDouble(d, FREQOFF_MIN, FREQOFF_MAX);
}
c = GetPhaseText();
if (c) {
c->GetValue().ToLong(&x);
startphase = TrapLong(x, PHASE_MIN, PHASE_MAX);
}
c = GetDepthText();
if (c) {
c->GetValue().ToLong(&x);
depth = TrapLong(x, DEPTH_MIN, DEPTH_MAX);
}
c = GetResonanceText();
if (c) {
double d;
c->GetValue().ToDouble(&d);
res = TrapDouble(d * 10, RES_MIN, RES_MAX) / 10;
}
return TRUE;
}
void EffectChangeSpeed::Update_TimeCtrl_ToLength()
// Update ToLength control from percent change.
{
mToLength = (mFromLength * 100.0) / (100.0 + m_PercentChange);
// Set the format first so we can get sample accuracy.
mpToLengthCtrl->SetFormatName(mFormat);
// Negative times do not make sense.
// 359999 = 99h:59m:59s which is a little less disturbing than overflow characters
// though it may still look a bit strange with some formats.
mToLength = TrapDouble(mToLength, 0.0, 359999.0);
mpToLengthCtrl->SetValue(mToLength);
}
bool AmplifyDialog::TransferDataFromWindow()
{
wxTextCtrl *c = GetAmpText();
if (c) {
double r;
wxString val = c->GetValue();
val.ToDouble(&r);
ratio = pow(10,TrapDouble(r*10, AMP_MIN, AMP_MAX)/100.0);
}
return TRUE;
}
void WahwahDialog::OnFreqOffText(wxCommandEvent & WXUNUSED(event))
{
wxTextCtrl *c = GetFreqOffText();
if (c) {
double freqoff;
c->GetValue().ToDouble(&freqoff);
freqoff = TrapDouble(freqoff, FREQOFF_MIN, FREQOFF_MAX);
wxSlider *slider = GetFreqOffSlider();
if (slider)
slider->SetValue((int)freqoff);
}
}
void PhaserDialog::OnFreqText(wxCommandEvent & WXUNUSED(event))
{
wxTextCtrl *c = GetFreqText();
if (c) {
double freq;
c->GetValue().ToDouble(&freq);
freq = TrapDouble(freq * 10, FREQ_MIN, FREQ_MAX);
wxSlider *slider = GetFreqSlider();
if (slider)
slider->SetValue((int)freq);
}
}
void WahwahDialog::OnResonanceText(wxCommandEvent & event)
{
wxTextCtrl *c = GetResonanceText();
if (c) {
double resd = Internat::ToDouble(c->GetValue());
res = resd;
res = TrapDouble(resd * 10, RES_MIN, RES_MAX) / 10.0;
wxSlider *slider = GetResonanceSlider();
if (slider)
slider->SetValue((int)(res * 10));
}
}
void AmplifyDialog::OnAmpSlider(wxCommandEvent & event)
{
wxString str;
double dB = mAmpS->GetValue() / 10.0;
ratio = pow(10.0,TrapDouble(dB, AMP_MIN, AMP_MAX)/20.0);
double dB2 = (mAmpS->GetValue()-1) / 10.0;
double ratio2 = pow(10.0,TrapDouble(dB2, AMP_MIN, AMP_MAX)/20.0);
if (!mClip->GetValue() && ratio * peak > 1.0 && ratio2 * peak < 1.0)
ratio = 1.0 / peak;
str.Printf(wxT("%.1f"), 20*log10(ratio));
mAmpT->ChangeValue(str);
if (ratio*peak > 0.0)
str.Printf(wxT("%.1f"), 20*log10(ratio*peak));
else
str = _("-Infinity"); // the case when the waveform is all zero
mPeakT->ChangeValue(str);
CheckClip();
}
void WahwahDialog::OnResonanceText(wxCommandEvent & WXUNUSED(event))
{
wxTextCtrl *c = GetResonanceText();
if (c) {
double resd;
c->GetValue().ToDouble(&resd);
res = resd;
res = TrapDouble(resd * 10, RES_MIN, RES_MAX) / 10.0;
wxSlider *slider = GetResonanceSlider();
if (slider)
slider->SetValue((int)floor(res * 10 + .5));
}
}
bool AmplifyDialog::TransferDataFromWindow()
{
wxTextCtrl *c = GetAmpText();
if (c) {
double r = 0;
wxString val = c->GetValue();
val.ToDouble(&r);
ratio = pow(10.0,TrapDouble(r*10, AMP_MIN, AMP_MAX)/200.0);
}
noclip = !GetClipCheckBox()->GetValue();
return TRUE;
}
bool PhaserDialog::TransferDataFromWindow()
{
wxTextCtrl *c;
long x;
c = GetFreqText();
if (c) {
double d;
c->GetValue().ToDouble(&d);
freq = TrapDouble(d * 10, FREQ_MIN, FREQ_MAX) / 10;
}
c = GetPhaseText();
if (c) {
c->GetValue().ToLong(&x);
startphase = TrapLong(x, PHASE_MIN, PHASE_MAX);
}
c = GetDepthText();
if (c) {
c->GetValue().ToLong(&x);
depth = TrapLong(x, DEPTH_MIN, DEPTH_MAX);
}
c = GetFeedbackText();
if (c) {
c->GetValue().ToLong(&x);
fb = TrapLong(x, FB_MIN, FB_MAX);
}
c = GetStagesText();
if (c) {
c->GetValue().ToLong(&x);
stages = TrapLong(x, STAGES_MIN, STAGES_MAX);
if ((stages % 2) == 1) // must be even
stages = TrapLong(stages - 1, STAGES_MIN, STAGES_MAX);
}
c = GetDryWetText();
if (c) {
c->GetValue().ToLong(&x);
drywet = TrapLong(x, DRYWET_MIN, DRYWET_MAX);
}
return TRUE;
}
void EffectAmplify::OnAmpText(wxCommandEvent & WXUNUSED(evt))
{
if (!mAmpT->GetValidator()->TransferFromWindow())
{
EnableApply(false);
return;
}
mRatio = DB_TO_LINEAR(TrapDouble(mAmp * SCL_Amp, MIN_Amp * SCL_Amp, MAX_Amp * SCL_Amp) / SCL_Amp);
mAmpS->SetValue((int) (LINEAR_TO_DB(mRatio) * SCL_Amp + 0.5));
mNewPeak = LINEAR_TO_DB(mRatio * mPeak);
mNewPeakT->GetValidator()->TransferToWindow();
CheckClip();
}
bool EffectAmplify::TransferDataFromWindow()
{
if (!mUIParent->Validate() || !mUIParent->TransferDataFromWindow())
{
return false;
}
mRatio = DB_TO_LINEAR(TrapDouble(mAmp * SCL_Amp, MIN_Amp * SCL_Amp, MAX_Amp * SCL_Amp) / SCL_Amp);
mCanClip = mClip->GetValue();
if (!mCanClip && mRatio * mPeak > 1.0)
{
mRatio = 1.0 / mPeak;
}
return true;
}
void AmplifyDialog::OnPeakText(wxCommandEvent & event)
{
wxString val = mPeakT->GetValue();
double r;
val.ToDouble(&r);
ratio = pow(10.0, r/20.0) / peak;
double dB = TrapDouble(200*log10(ratio), AMP_MIN, AMP_MAX)/10.0;
ratio = pow(10.0, dB/20.0);
mAmpS->SetValue((int)(10*dB+0.5));
val.Printf(wxT("%.1f"), dB);
mAmpT->ChangeValue(val);
CheckClip();
}
void AmplifyDialog::OnAmpText(wxCommandEvent & event)
{
wxString val = mAmpT->GetValue();
double r;
val.ToDouble(&r);
ratio = pow(10.0,TrapDouble(r*10, AMP_MIN, AMP_MAX)/200.0);
mAmpS->SetValue((int)(200*log10(ratio)+0.5));
if( ratio*peak > 0.0 )
val.Printf(wxT("%.1f"), 20*log10(ratio*peak));
else
val = _("-Infinity"); // the case when the waveform is all zero
mPeakT->ChangeValue(val);
CheckClip();
}
bool AmplifyDialog::TransferDataToWindow()
{
// limit range of gain
double dB = TrapDouble(200*log10(ratio), AMP_MIN, AMP_MAX)/10.0;
ratio = pow(10.0, dB/20.0);
mAmpS->SetValue((int)(200*log10(ratio)+0.5));
mAmpT->ChangeValue(wxString::Format(wxT("%.1f"), 20*log10(ratio)));
wxString str;
if( ratio*peak > 0.0 )
str.Printf(wxT("%.1f"), 20*log10(ratio*peak));
else
str = _("-Infinity"); // the case when the waveform is all zero
mPeakT->ChangeValue(str);
return true;
}
