/**
Initialize debug agent.
This function is used to set up debug environment for SEC and PEI phase.
If InitFlag is DEBUG_AGENT_INIT_PREMEM_SEC, it will overirde IDT table entries
and initialize debug port. It will enable interrupt to support break-in feature.
It will set up debug agent Mailbox in cache-as-ramfrom. It will be called before
physical memory is ready.
If InitFlag is DEBUG_AGENT_INIT_POSTMEM_SEC, debug agent will build one GUIDed
HOB to copy debug agent Mailbox. It will be called after physical memory is ready.
This function is used to set up debug environment to support source level debugging.
If certain Debug Agent Library instance has to save some private data in the stack,
this function must work on the mode that doesn't return to the caller, then
the caller needs to wrap up all rest of logic after InitializeDebugAgent() into one
function and pass it into InitializeDebugAgent(). InitializeDebugAgent() is
responsible to invoke the passing-in function at the end of InitializeDebugAgent().
If the parameter Function is not NULL, Debug Agent Libary instance will invoke it by
passing in the Context to be its parameter.
If Function() is NULL, Debug Agent Library instance will return after setup debug
environment.
@param[in] InitFlag Init flag is used to decide the initialize process.
@param[in] Context Context needed according to InitFlag; it was optional.
@param[in] Function Continue function called by debug agent library; it was
optional.
**/
VOID
EFIAPI
InitializeDebugAgent (
IN UINT32 InitFlag,
IN VOID *Context, OPTIONAL
IN DEBUG_AGENT_CONTINUE Function OPTIONAL
)
{
DEBUG_AGENT_MAILBOX *Mailbox;
DEBUG_AGENT_MAILBOX MailboxInStack;
DEBUG_AGENT_PHASE2_CONTEXT Phase2Context;
DEBUG_AGENT_CONTEXT_POSTMEM_SEC *DebugAgentContext;
DisableInterrupts ();
switch (InitFlag) {
case DEBUG_AGENT_INIT_PREMEM_SEC:
InitializeDebugIdt ();
Mailbox = &MailboxInStack;
ZeroMem ((VOID *) Mailbox, sizeof (DEBUG_AGENT_MAILBOX));
//
// Get and save debug port handle and set the length of memory block.
//
SetMailboxPointerInIdtEntry ((VOID *) Mailbox);
InitializeDebugTimer ();
Phase2Context.Context = Context;
Phase2Context.Function = Function;
DebugPortInitialize ((VOID *) &Phase2Context, InitializeDebugAgentPhase2);
//
// If reaches here, it means Debug Port initialization failed.
//
DEBUG ((EFI_D_ERROR, "Debug Agent: Debug port initialization failed.\n"));
break;
case DEBUG_AGENT_INIT_POSTMEM_SEC:
//
// Memory has been ready
//
if (IsHostConnected()) {
//
// Trigger one software interrupt to inform HOST
//
TriggerSoftInterrupt (MEMORY_READY_SIGNATURE);
}
DebugAgentContext = (DEBUG_AGENT_CONTEXT_POSTMEM_SEC *) Context;
Mailbox = (DEBUG_AGENT_MAILBOX *) GetMailboxPointerInIdtEntry ();
Mailbox->DebugPortHandle = Mailbox->DebugPortHandle + DebugAgentContext->StackMigrateOffset;
Mailbox = BuildMailboxHob ();
Mailbox = (DEBUG_AGENT_MAILBOX *) ((UINTN) Mailbox + DebugAgentContext->HeapMigrateOffset);
SetMailboxPointerInIdtEntry ((VOID *) Mailbox);
EnableInterrupts ();
break;
default:
//
// Only DEBUG_AGENT_INIT_PREMEM_SEC and DEBUG_AGENT_INIT_POSTMEM_SEC are allowed for this
// Debug Agent library instance.
//
DEBUG ((EFI_D_ERROR, "Debug Agent: The InitFlag value is not allowed!\n"));
CpuDeadLoop ();
break;
}
//
// If Function is not NULL, invoke it always whatever debug agent was initialized sucesssfully or not.
//
if (Function != NULL) {
Function (Context);
}
}
/**
Initialize debug agent.
This function is used to set up debug environment for SEC and PEI phase.
If InitFlag is DEBUG_AGENT_INIT_PREMEM_SEC, it will overirde IDT table entries
and initialize debug port. It will enable interrupt to support break-in feature.
It will set up debug agent Mailbox in cache-as-ramfrom. It will be called before
physical memory is ready.
If InitFlag is DEBUG_AGENT_INIT_POSTMEM_SEC, debug agent will build one GUIDed
HOB to copy debug agent Mailbox. It will be called after physical memory is ready.
This function is used to set up debug environment to support source level debugging.
If certain Debug Agent Library instance has to save some private data in the stack,
this function must work on the mode that doesn't return to the caller, then
the caller needs to wrap up all rest of logic after InitializeDebugAgent() into one
function and pass it into InitializeDebugAgent(). InitializeDebugAgent() is
responsible to invoke the passing-in function at the end of InitializeDebugAgent().
If the parameter Function is not NULL, Debug Agent Libary instance will invoke it by
passing in the Context to be its parameter.
If Function() is NULL, Debug Agent Library instance will return after setup debug
environment.
@param[in] InitFlag Init flag is used to decide the initialize process.
@param[in] Context Context needed according to InitFlag; it was optional.
@param[in] Function Continue function called by debug agent library; it was
optional.
**/
VOID
EFIAPI
InitializeDebugAgent (
IN UINT32 InitFlag,
IN VOID *Context, OPTIONAL
IN DEBUG_AGENT_CONTINUE Function OPTIONAL
)
{
DEBUG_AGENT_MAILBOX *Mailbox;
DEBUG_AGENT_MAILBOX *NewMailbox;
DEBUG_AGENT_MAILBOX MailboxInStack;
DEBUG_AGENT_PHASE2_CONTEXT Phase2Context;
DEBUG_AGENT_CONTEXT_POSTMEM_SEC *DebugAgentContext;
EFI_STATUS Status;
IA32_DESCRIPTOR *Ia32Idtr;
IA32_IDT_ENTRY *Ia32IdtEntry;
UINT64 DebugPortHandle;
UINT64 MailboxLocation;
UINT64 *MailboxLocationPointer;
EFI_PHYSICAL_ADDRESS Address;
DisableInterrupts ();
switch (InitFlag) {
case DEBUG_AGENT_INIT_PREMEM_SEC:
InitializeDebugIdt ();
MailboxLocation = (UINT64)(UINTN)&MailboxInStack;
Mailbox = &MailboxInStack;
ZeroMem ((VOID *) Mailbox, sizeof (DEBUG_AGENT_MAILBOX));
//
// Get and save debug port handle and set the length of memory block.
//
SetLocationSavedMailboxPointerInIdtEntry (&MailboxLocation);
//
// Force error message could be printed during the first shakehand between Target/HOST.
//
SetDebugFlag (DEBUG_AGENT_FLAG_PRINT_ERROR_LEVEL, DEBUG_AGENT_ERROR);
//
// Save init arch type when debug agent initialized
//
SetDebugFlag (DEBUG_AGENT_FLAG_INIT_ARCH, DEBUG_ARCH_SYMBOL);
InitializeDebugTimer ();
Phase2Context.InitFlag = InitFlag;
Phase2Context.Context = Context;
Phase2Context.Function = Function;
DebugPortInitialize ((VOID *) &Phase2Context, InitializeDebugAgentPhase2);
//
// If reaches here, it means Debug Port initialization failed.
//
DEBUG ((EFI_D_ERROR, "Debug Agent: Debug port initialization failed.\n"));
break;
case DEBUG_AGENT_INIT_POSTMEM_SEC:
Mailbox = GetMailboxPointer ();
//
// Memory has been ready
//
SetDebugFlag (DEBUG_AGENT_FLAG_MEMORY_READY, 1);
if (IsHostAttached ()) {
//
// Trigger one software interrupt to inform HOST
//
TriggerSoftInterrupt (MEMORY_READY_SIGNATURE);
}
//
// Install Vector Handoff Info PPI to persist vectors used by Debug Agent
//
Status = PeiServicesInstallPpi (&mVectorHandoffInfoPpiList[0]);
if (EFI_ERROR (Status)) {
DEBUG ((EFI_D_ERROR, "DebugAgent: Failed to install Vector Handoff Info PPI!\n"));
CpuDeadLoop ();
}
//
// Fix up Debug Port handle address and mailbox address
//
DebugAgentContext = (DEBUG_AGENT_CONTEXT_POSTMEM_SEC *) Context;
if (DebugAgentContext != NULL) {
DebugPortHandle = (UINT64)(UINT32)(Mailbox->DebugPortHandle + DebugAgentContext->StackMigrateOffset);
UpdateMailboxContent (Mailbox, DEBUG_MAILBOX_DEBUG_PORT_HANDLE_INDEX, DebugPortHandle);
Mailbox = (DEBUG_AGENT_MAILBOX *) ((UINTN) Mailbox + DebugAgentContext->StackMigrateOffset);
MailboxLocation = (UINT64)(UINTN)Mailbox;
//
// Build mailbox location in HOB and fix-up its address
//
MailboxLocationPointer = BuildGuidDataHob (
&gEfiDebugAgentGuid,
&MailboxLocation,
sizeof (UINT64)
);
MailboxLocationPointer = (UINT64 *) ((UINTN) MailboxLocationPointer + DebugAgentContext->HeapMigrateOffset);
} else {
//
// DebugAgentContext is NULL. Then, Mailbox can directly be copied into memory.
// Allocate ACPI NVS memory for new Mailbox and Debug Port Handle buffer
//
Status = PeiServicesAllocatePages (
EfiACPIMemoryNVS,
EFI_SIZE_TO_PAGES (sizeof(DEBUG_AGENT_MAILBOX) + PcdGet16(PcdDebugPortHandleBufferSize)),
&Address
);
if (EFI_ERROR (Status)) {
DEBUG ((EFI_D_ERROR, "DebugAgent: Failed to allocate pages!\n"));
CpuDeadLoop ();
}
NewMailbox = (DEBUG_AGENT_MAILBOX *) (UINTN) Address;
//
// Copy Mailbox and Debug Port Handle buffer to new location in ACPI NVS memory, because original Mailbox
// and Debug Port Handle buffer in the allocated pool that may be marked as free by DXE Core after DXE Core
// reallocates the HOB.
//
CopyMem (NewMailbox, Mailbox, sizeof (DEBUG_AGENT_MAILBOX));
CopyMem (NewMailbox + 1, (VOID *)(UINTN)Mailbox->DebugPortHandle, PcdGet16(PcdDebugPortHandleBufferSize));
UpdateMailboxContent (NewMailbox, DEBUG_MAILBOX_DEBUG_PORT_HANDLE_INDEX, (UINT64)(UINTN)(NewMailbox + 1));
MailboxLocation = (UINT64)(UINTN)NewMailbox;
//
// Build mailbox location in HOB
//
MailboxLocationPointer = BuildGuidDataHob (
&gEfiDebugAgentGuid,
&MailboxLocation,
sizeof (UINT64)
);
}
//
// Update IDT entry to save the location saved mailbox pointer
//
SetLocationSavedMailboxPointerInIdtEntry (MailboxLocationPointer);
break;
case DEBUG_AGENT_INIT_PEI:
if (Context == NULL) {
DEBUG ((EFI_D_ERROR, "DebugAgent: Input parameter Context cannot be NULL!\n"));
CpuDeadLoop ();
}
//
// Check if Debug Agent has initialized before
//
if (IsDebugAgentInitialzed()) {
DEBUG ((EFI_D_WARN, "Debug Agent: It has already initialized in SEC Core!\n"));
break;
}
//
// Install Vector Handoff Info PPI to persist vectors used by Debug Agent
//
Status = PeiServicesInstallPpi (&mVectorHandoffInfoPpiList[0]);
if (EFI_ERROR (Status)) {
DEBUG ((EFI_D_ERROR, "DebugAgent: Failed to install Vector Handoff Info PPI!\n"));
CpuDeadLoop ();
}
//
// Set up IDT entries
//
InitializeDebugIdt ();
//
// Build mailbox in HOB and setup Mailbox Set In Pei flag
//
Mailbox = AllocateZeroPool (sizeof (DEBUG_AGENT_MAILBOX));
MailboxLocation = (UINT64)(UINTN)Mailbox;
MailboxLocationPointer = BuildGuidDataHob (
&gEfiDebugAgentGuid,
&MailboxLocation,
sizeof (UINT64)
);
InitializeDebugTimer ();
//
// Update IDT entry to save the location pointer saved mailbox pointer
//
SetLocationSavedMailboxPointerInIdtEntry (MailboxLocationPointer);
//
// Save init arch type when debug agent initialized
//
SetDebugFlag (DEBUG_AGENT_FLAG_INIT_ARCH, DEBUG_ARCH_SYMBOL);
//
// Register for a callback once memory has been initialized.
// If memery has been ready, the callback funtion will be invoked immediately
//
Status = PeiServicesNotifyPpi (&mMemoryDiscoveredNotifyList[0]);
if (EFI_ERROR (Status)) {
DEBUG ((EFI_D_ERROR, "DebugAgent: Failed to register memory discovered callback function!\n"));
CpuDeadLoop ();
}
//
// Set HOB check flag if memory has not been ready yet
//
if (GetDebugFlag (DEBUG_AGENT_FLAG_MEMORY_READY) == 0) {
SetDebugFlag (DEBUG_AGENT_FLAG_CHECK_MAILBOX_IN_HOB, 1);
}
Phase2Context.InitFlag = InitFlag;
Phase2Context.Context = Context;
Phase2Context.Function = Function;
DebugPortInitialize ((VOID *) &Phase2Context, InitializeDebugAgentPhase2);
FindAndReportModuleImageInfo (4);
break;
case DEBUG_AGENT_INIT_THUNK_PEI_IA32TOX64:
if (Context == NULL) {
DEBUG ((EFI_D_ERROR, "DebugAgent: Input parameter Context cannot be NULL!\n"));
CpuDeadLoop ();
} else {
Ia32Idtr = (IA32_DESCRIPTOR *) Context;
Ia32IdtEntry = (IA32_IDT_ENTRY *)(Ia32Idtr->Base);
MailboxLocationPointer = (UINT64 *) (UINTN) (Ia32IdtEntry[DEBUG_MAILBOX_VECTOR].Bits.OffsetLow +
(Ia32IdtEntry[DEBUG_MAILBOX_VECTOR].Bits.OffsetHigh << 16));
Mailbox = (DEBUG_AGENT_MAILBOX *) (UINTN)(*MailboxLocationPointer);
//
// Mailbox should valid and setup before executing thunk code
//
VerifyMailboxChecksum (Mailbox);
DebugPortHandle = (UINT64) (UINTN)DebugPortInitialize ((VOID *)(UINTN)Mailbox->DebugPortHandle, NULL);
UpdateMailboxContent (Mailbox, DEBUG_MAILBOX_DEBUG_PORT_HANDLE_INDEX, DebugPortHandle);
//
// Set up IDT entries
//
InitializeDebugIdt ();
//
// Update IDT entry to save location pointer saved the mailbox pointer
//
SetLocationSavedMailboxPointerInIdtEntry (MailboxLocationPointer);
FindAndReportModuleImageInfo (4);
}
break;
default:
//
// Only DEBUG_AGENT_INIT_PREMEM_SEC and DEBUG_AGENT_INIT_POSTMEM_SEC are allowed for this
// Debug Agent library instance.
//
DEBUG ((EFI_D_ERROR, "Debug Agent: The InitFlag value is not allowed!\n"));
CpuDeadLoop ();
break;
}
//
// Enable CPU interrupts so debug timer interrupts can be delivered
//
EnableInterrupts ();
//
// If Function is not NULL, invoke it always whatever debug agent was initialized sucesssfully or not.
//
if (Function != NULL) {
Function (Context);
}
//
// Set return status for DEBUG_AGENT_INIT_PEI
//
if (InitFlag == DEBUG_AGENT_INIT_PEI && Context != NULL) {
*(EFI_STATUS *)Context = EFI_SUCCESS;
}
}
/**
Initialize debug agent.
This function is used to set up debug enviroment for source level debug
in SMM code.
If InitFlag is DEBUG_AGENT_INIT_SMM, it will overirde IDT table entries
and initialize debug port. It will get debug agent Mailbox from GUIDed HOB,
it it exists, debug agent wiil copied it into the local Mailbox in SMM space.
it will overirde IDT table entries and initialize debug port. Context will be
NULL.
If InitFlag is DEBUG_AGENT_INIT_ENTER_SMI, debug agent will save Debug
Registers and get local Mailbox in SMM space. Context will be NULL.
If InitFlag is DEBUG_AGENT_INIT_EXIT_SMI, debug agent will restore Debug
Registers. Context will be NULL.
@param[in] InitFlag Init flag is used to decide initialize process.
@param[in] Context Context needed according to InitFlag.
@param[in] Function Continue function called by debug agent library; it was
optional.
**/
VOID
EFIAPI
InitializeDebugAgent (
IN UINT32 InitFlag,
IN VOID *Context, OPTIONAL
IN DEBUG_AGENT_CONTINUE Function OPTIONAL
)
{
EFI_STATUS Status;
UINT64 DebugPortHandle;
IA32_IDT_GATE_DESCRIPTOR IdtEntry[33];
IA32_DESCRIPTOR IdtDescriptor;
IA32_DESCRIPTOR *Ia32Idtr;
IA32_IDT_ENTRY *Ia32IdtEntry;
IA32_DESCRIPTOR Idtr;
UINT16 IdtEntryCount;
DEBUG_AGENT_MAILBOX *Mailbox;
UINT64 *MailboxLocation;
UINT32 DebugTimerFrequency;
BOOLEAN PeriodicMode;
UINTN TimerCycle;
switch (InitFlag) {
case DEBUG_AGENT_INIT_SMM:
//
// Install configuration table for persisted vector handoff info
//
Status = gSmst->SmmInstallConfigurationTable (
gSmst,
&gEfiVectorHandoffTableGuid,
(VOID *) &mVectorHandoffInfoDebugAgent[0],
sizeof (EFI_VECTOR_HANDOFF_INFO) * mVectorHandoffInfoCount
);
if (EFI_ERROR (Status)) {
DEBUG ((EFI_D_ERROR, "DebugAgent: Cannot install configuration table for persisted vector handoff info!\n"));
CpuDeadLoop ();
}
//
// Check if Debug Agent initialized in DXE phase
//
Status = EfiGetSystemConfigurationTable (&gEfiDebugAgentGuid, (VOID **) &Mailbox);
if (Status == EFI_SUCCESS && Mailbox != NULL) {
VerifyMailboxChecksum (Mailbox);
mMailboxPointer = Mailbox;
break;
}
//
// Check if Debug Agent initialized in SEC/PEI phase
//
Mailbox = GetMailboxFromHob ();
if (Mailbox != NULL) {
mMailboxPointer = Mailbox;
break;
}
//
// Debug Agent was not initialized before, use the local mailbox.
//
ZeroMem (&mLocalMailbox, sizeof (DEBUG_AGENT_MAILBOX));
Mailbox = &mLocalMailbox;
//
// Save original IDT entries
//
AsmReadIdtr (&IdtDescriptor);
CopyMem (&IdtEntry, (VOID *)IdtDescriptor.Base, 33 * sizeof(IA32_IDT_GATE_DESCRIPTOR));
//
// Initialized Debug Agent
//
InitializeDebugIdt ();
//
// Initialize Debug Timer hardware and save its frequency
//
InitializeDebugTimer (&DebugTimerFrequency, TRUE);
UpdateMailboxContent (Mailbox, DEBUG_MAILBOX_DEBUG_TIMER_FREQUENCY, DebugTimerFrequency);
DebugPortHandle = (UINT64) (UINTN)DebugPortInitialize ((DEBUG_PORT_HANDLE) (UINTN)Mailbox->DebugPortHandle, NULL);
UpdateMailboxContent (Mailbox, DEBUG_MAILBOX_DEBUG_PORT_HANDLE_INDEX, DebugPortHandle);
mMailboxPointer = Mailbox;
//
// Trigger one software interrupt to inform HOST
//
TriggerSoftInterrupt (SYSTEM_RESET_SIGNATURE);
SetDebugFlag (DEBUG_AGENT_FLAG_MEMORY_READY, 1);
//
// Memory has been ready
//
if (IsHostAttached ()) {
//
// Trigger one software interrupt to inform HOST
//
TriggerSoftInterrupt (MEMORY_READY_SIGNATURE);
}
//
// Find and report PE/COFF image info to HOST
//
FindAndReportModuleImageInfo (SIZE_4KB);
//
// Restore saved IDT entries
//
CopyMem ((VOID *)IdtDescriptor.Base, &IdtEntry, 33 * sizeof(IA32_IDT_GATE_DESCRIPTOR));
break;
case DEBUG_AGENT_INIT_ENTER_SMI:
SaveDebugRegister ();
if (!mSmmDebugIdtInitFlag) {
//
// We only need to initialize Debug IDT table at first SMI entry
// after SMM relocation.
//
InitializeDebugIdt ();
mSmmDebugIdtInitFlag = TRUE;
}
//
// Check if CPU APIC Timer is working, otherwise initialize it.
//
InitializeLocalApicSoftwareEnable (TRUE);
GetApicTimerState (NULL, &PeriodicMode, NULL);
TimerCycle = GetApicTimerInitCount ();
if (!PeriodicMode || TimerCycle == 0) {
InitializeDebugTimer (NULL, FALSE);
}
Mailbox = GetMailboxPointer ();
if (GetDebugFlag (DEBUG_AGENT_FLAG_AGENT_IN_PROGRESS) == 1) {
//
// If Debug Agent has been communicaton state with HOST, we need skip
// any break points set in SMM, set Skip Breakpoint flag
//
mSkipBreakpoint = TRUE;
}
if (GetDebugFlag (DEBUG_AGENT_FLAG_BREAK_ON_NEXT_SMI) == 1) {
if (mSkipBreakpoint) {
//
// Print warning message if ignore smm entry break
//
DebugPortWriteBuffer ((DEBUG_PORT_HANDLE) (UINTN)Mailbox->DebugPortHandle,
(UINT8 *)mWarningMsgIgnoreSmmEntryBreak,
AsciiStrLen (mWarningMsgIgnoreSmmEntryBreak)
);
} else {
//
// If SMM entry break is set, SMM code will be break at here.
//
CpuBreakpoint ();
}
}
break;
case DEBUG_AGENT_INIT_EXIT_SMI:
Mailbox = GetMailboxPointer ();
//
// Clear Skip Breakpoint flag
//
mSkipBreakpoint = FALSE;
RestoreDebugRegister ();
break;
case DEBUG_AGENT_INIT_THUNK_PEI_IA32TOX64:
if (Context == NULL) {
DEBUG ((EFI_D_ERROR, "DebugAgent: Input parameter Context cannot be NULL!\n"));
CpuDeadLoop ();
} else {
Ia32Idtr = (IA32_DESCRIPTOR *) Context;
Ia32IdtEntry = (IA32_IDT_ENTRY *)(Ia32Idtr->Base);
MailboxLocation = (UINT64 *) (UINTN) (Ia32IdtEntry[DEBUG_MAILBOX_VECTOR].Bits.OffsetLow +
(UINT32) (Ia32IdtEntry[DEBUG_MAILBOX_VECTOR].Bits.OffsetHigh << 16));
mMailboxPointer = (DEBUG_AGENT_MAILBOX *)(UINTN)(*MailboxLocation);
VerifyMailboxChecksum (mMailboxPointer);
//
// Get original IDT address and size.
//
AsmReadIdtr ((IA32_DESCRIPTOR *) &Idtr);
IdtEntryCount = (UINT16) ((Idtr.Limit + 1) / sizeof (IA32_IDT_GATE_DESCRIPTOR));
if (IdtEntryCount < 33) {
Idtr.Limit = (UINT16) (sizeof (IA32_IDT_GATE_DESCRIPTOR) * 33 - 1);
Idtr.Base = (UINTN) &mIdtEntryTable;
ZeroMem (&mIdtEntryTable, Idtr.Limit + 1);
AsmWriteIdtr ((IA32_DESCRIPTOR *) &Idtr);
}
InitializeDebugIdt ();
//
// Initialize Debug Timer hardware and save its frequency
//
InitializeDebugTimer (&DebugTimerFrequency, TRUE);
UpdateMailboxContent (mMailboxPointer, DEBUG_MAILBOX_DEBUG_TIMER_FREQUENCY, DebugTimerFrequency);
//
// Enable Debug Timer interrupt and CPU interrupt
//
SaveAndSetDebugTimerInterrupt (TRUE);
EnableInterrupts ();
FindAndReportModuleImageInfo (SIZE_4KB);
}
break;
default:
//
// Only DEBUG_AGENT_INIT_PREMEM_SEC and DEBUG_AGENT_INIT_POSTMEM_SEC are allowed for this
// Debug Agent library instance.
//
DEBUG ((EFI_D_ERROR, "Debug Agent: The InitFlag value is not allowed!\n"));
CpuDeadLoop ();
break;
}
}
/**
Debug Agent provided notify callback function on Memory Discovered PPI.
@param[in] PeiServices Indirect reference to the PEI Services Table.
@param[in] NotifyDescriptor Address of the notification descriptor data structure.
@param[in] Ppi Address of the PPI that was installed.
@retval EFI_SUCCESS If the function completed successfully.
**/
EFI_STATUS
EFIAPI
DebugAgentCallbackMemoryDiscoveredPpi (
IN EFI_PEI_SERVICES **PeiServices,
IN EFI_PEI_NOTIFY_DESCRIPTOR *NotifyDescriptor,
IN VOID *Ppi
)
{
EFI_STATUS Status;
DEBUG_AGENT_MAILBOX *Mailbox;
BOOLEAN InterruptStatus;
EFI_PHYSICAL_ADDRESS Address;
DEBUG_AGENT_MAILBOX *NewMailbox;
UINT64 *MailboxLocationInHob;
//
// Save and disable original interrupt status
//
InterruptStatus = SaveAndDisableInterrupts ();
//
// Allocate ACPI NVS memory for new Mailbox and Debug Port Handle buffer
//
Status = PeiServicesAllocatePages (
EfiACPIMemoryNVS,
EFI_SIZE_TO_PAGES (sizeof(DEBUG_AGENT_MAILBOX) + PcdGet16(PcdDebugPortHandleBufferSize)),
&Address
);
ASSERT_EFI_ERROR (Status);
NewMailbox = (DEBUG_AGENT_MAILBOX *) (UINTN) Address;
//
// Copy Mailbox and Debug Port Handle buffer to new location in ACPI NVS memory, because original Mailbox
// and Debug Port Handle buffer in the allocated pool that may be marked as free by DXE Core after DXE Core
// reallocates the HOB.
//
Mailbox = GetMailboxPointer ();
CopyMem (NewMailbox, Mailbox, sizeof (DEBUG_AGENT_MAILBOX));
CopyMem (NewMailbox + 1, (VOID *)(UINTN)Mailbox->DebugPortHandle, PcdGet16(PcdDebugPortHandleBufferSize));
//
// Update Mailbox Location pointer in GUIDed HOB and IDT entry with new one
//
MailboxLocationInHob = GetMailboxLocationFromHob ();
ASSERT (MailboxLocationInHob != NULL);
*MailboxLocationInHob = (UINT64)(UINTN)NewMailbox;
SetLocationSavedMailboxPointerInIdtEntry (MailboxLocationInHob);
//
// Update Debug Port Handle in new Mailbox
//
UpdateMailboxContent (NewMailbox, DEBUG_MAILBOX_DEBUG_PORT_HANDLE_INDEX, (UINT64)(UINTN)(NewMailbox + 1));
//
// Set physical memory ready flag
//
SetDebugFlag (DEBUG_AGENT_FLAG_MEMORY_READY, 1);
if (IsHostAttached ()) {
//
// Trigger one software interrupt to inform HOST
//
TriggerSoftInterrupt (MEMORY_READY_SIGNATURE);
}
//
// Restore interrupt state.
//
SetInterruptState (InterruptStatus);
return EFI_SUCCESS;
}
/**
Worker function to setup IDT table and initialize the IDT entries.
@param[in] Mailbox Pointer to Mailbox.
**/
VOID
SetupDebugAgentEnviroment (
IN DEBUG_AGENT_MAILBOX *Mailbox
)
{
IA32_DESCRIPTOR Idtr;
UINT16 IdtEntryCount;
UINT64 DebugPortHandle;
if (mMultiProcessorDebugSupport) {
InitializeSpinLock (&mDebugMpContext.MpContextSpinLock);
InitializeSpinLock (&mDebugMpContext.DebugPortSpinLock);
InitializeSpinLock (&mDebugMpContext.MailboxSpinLock);
//
// Clear Break CPU index value
//
mDebugMpContext.BreakAtCpuIndex = (UINT32) -1;
}
//
// Get original IDT address and size.
//
AsmReadIdtr ((IA32_DESCRIPTOR *) &Idtr);
IdtEntryCount = (UINT16) ((Idtr.Limit + 1) / sizeof (IA32_IDT_GATE_DESCRIPTOR));
if (IdtEntryCount < 33) {
ZeroMem (&mIdtEntryTable, sizeof (IA32_IDT_GATE_DESCRIPTOR) * 33);
//
// Copy original IDT table into new one
//
CopyMem (&mIdtEntryTable, (VOID *) Idtr.Base, Idtr.Limit + 1);
//
// Load new IDT table
//
Idtr.Limit = (UINT16) (sizeof (IA32_IDT_GATE_DESCRIPTOR) * 33 - 1);
Idtr.Base = (UINTN) &mIdtEntryTable;
AsmWriteIdtr ((IA32_DESCRIPTOR *) &Idtr);
}
//
// Initialize the IDT table entries to support source level debug.
//
InitializeDebugIdt ();
//
// If mMailboxPointer is not set before, set it
//
if (mMailboxPointer == NULL) {
if (Mailbox != NULL) {
//
// If Mailbox exists, copy it into one global variable
//
CopyMem (&mMailbox, Mailbox, sizeof (DEBUG_AGENT_MAILBOX));
} else {
ZeroMem (&mMailbox, sizeof (DEBUG_AGENT_MAILBOX));
}
mMailboxPointer = &mMailbox;
}
//
// Initialize debug communication port
//
DebugPortHandle = (UINT64) (UINTN)DebugPortInitialize ((VOID *)(UINTN)mMailboxPointer->DebugPortHandle, NULL);
UpdateMailboxContent (mMailboxPointer, DEBUG_MAILBOX_DEBUG_PORT_HANDLE_INDEX, DebugPortHandle);
if (Mailbox == NULL) {
//
// Trigger one software interrupt to inform HOST
//
TriggerSoftInterrupt (SYSTEM_RESET_SIGNATURE);
SetDebugFlag (DEBUG_AGENT_FLAG_MEMORY_READY, 1);
//
// Memory has been ready
//
if (IsHostAttached ()) {
//
// Trigger one software interrupt to inform HOST
//
TriggerSoftInterrupt (MEMORY_READY_SIGNATURE);
}
}
}