Lexical Scan(void) {
static char ChBuf[0x100];
char Ch, *CP; int H;
do Ch = GET(); while (isspace(Ch));
switch (Ch) {
case EOF: return EndT;
case '|': return BarT;
case '-': return DiffT;
case '&': return AndT;
case '^': return ProdT;
case '(': return LParT;
case ')': return RParT;
case '[': return LBrT;
case ']': return RBrT;
case '0': return ZeroT;
case '1': return OneT;
case '*': return StarT;
case '+': return PlusT;
case '?': return QuestT;
case '=': return EqualT;
case ',': return CommaT;
}
if (isalpha(Ch) || Ch == '_' || Ch == '$') {
for (CP = ChBuf; isalnum(Ch) || Ch == '_' || Ch == '$'; CP++) {
if (CP - ChBuf == sizeof ChBuf)
printf("Out of character space.\n"), exit(1);
*CP = Ch, Ch = GET();
}
if (Ch != EOF) UNGET(Ch);
goto RetSym;
} else if (Ch == '"') {
Ch = GET();
for (CP = ChBuf; Ch != '"' && Ch != EOF; CP++) {
if (CP - ChBuf == sizeof ChBuf)
printf("Out of character space.\n"), exit(1);
*CP = Ch, Ch = GET();
}
if (Ch == EOF) printf("Missing closing \".\n"), exit(1);
goto RetSym;
} else {
ERROR("extra character %c", Ch); return EndT;
}
RetSym:
if (CP - ChBuf == sizeof ChBuf) printf("Out of character space.\n"), exit(1);
*CP = '\0';
for (H = 0, CP = ChBuf; *CP != '\0'; CP++) H = (H << 1) ^ *CP;
H &= 0xff;
for (LastID = HashTab[H]; LastID != 0; LastID = LastID->Next)
if (strcmp(LastID->Name, ChBuf) == 0) return SymT;
LastID = (Symbol)Allocate(sizeof *LastID);
LastID->Name = CopyS(ChBuf); LastID->Value = 0;
LastID->Hash = H, LastID->Next = HashTab[H], HashTab[H] = LastID;
return SymT;
}
size_t
_icv_iconv(struct _icv_state *st, char **inbuf, size_t *inbytesleft,
char **outbuf, size_t *outbytesleft)
{
int cset;
unsigned char *ip, ic;
char *op;
size_t ileft, oleft;
size_t retval;
/*
* If inbuf and/or *inbuf are NULL, reset conversion descriptor
* and put escape sequence if needed.
*/
if ((inbuf == NULL) || (*inbuf == NULL)) {
if (st->_st_cset != CS_0) {
if ((outbuf != NULL) && (*outbuf != NULL)
&& (outbytesleft != NULL)) {
op = (char *)*outbuf;
oleft = *outbytesleft;
if (oleft < SEQ_SBTOG0) {
errno = E2BIG;
return ((size_t)-1);
}
PUT(ESC);
PUT(SBTOG0_1);
PUT(F_X0201_RM);
*outbuf = (char *)op;
*outbytesleft = oleft;
}
st->_st_cset = CS_0;
}
return ((size_t)0);
}
cset = st->_st_cset;
ip = (unsigned char *)*inbuf;
op = *outbuf;
ileft = *inbytesleft;
oleft = *outbytesleft;
/*
* Main loop; basically 1 loop per 1 output char
*/
while ((int)ileft > 0) {
GET(ic);
if (ISASC((int)ic)) { /* ASCII */
if (cset != CS_0) {
if (oleft < SEQ_SBTOG0) {
UNGET();
errno = E2BIG;
retval = (size_t)ERR_RETURN;
goto ret;
}
PUT(ESC); /* Kanji Out */
PUT(SBTOG0_1);
PUT(F_X0201_RM);
}
cset = CS_0;
if (oleft < JISW0) {
UNGET();
errno = E2BIG;
retval = (size_t)ERR_RETURN;
goto ret;
}
/* Put ASCII character */
PUT(ic);
continue;
} else if (ISCS1((int)ic)) { /* CS_1 starts */
if ((int)ileft > 0) {
if (ISCS1(ic) && ISCS1(*ip)) {
if (cset != CS_1) {
if (oleft < SEQ_MBTOG0_O) {
UNGET();
errno = E2BIG;
retval =
(size_t)ERR_RETURN;
goto ret;
}
cset = CS_1;
PUT(ESC);
PUT(MBTOG0_1);
PUT(F_X0208_83_90);
}
if (oleft < JISW1) {
UNGET();
errno = E2BIG;
retval = (size_t)ERR_RETURN;
goto ret;
}
#ifdef RFC1468_MODE /* Convert VDC and UDC to GETA */
if ((ic == 0xad) || (0xf5 <= ic )){
PUT((JGETA >> 8) & CMASK);
GET(ic); /* Get dummy */
PUT(JGETA & CMASK);
continue;
}
#endif /* RFC1468_MODE */
/* Put JIS X 0208 character */
PUT(ic & CMASK);
GET(ic);
PUT(ic & CMASK);
continue;
} else {
errno = EILSEQ;
retval = (size_t)ERR_RETURN;
goto ret;
}
} else { /* input fragment of Kanji */
int
do_scrub_chars (int (*get) (char *, int), char *tostart, int tolen)
{
char *to = tostart;
char *toend = tostart + tolen;
char *from;
char *fromend;
int fromlen;
register int ch, ch2 = 0;
/* Character that started the string we're working on. */
static char quotechar;
/*State 0: beginning of normal line
1: After first whitespace on line (flush more white)
2: After first non-white (opcode) on line (keep 1white)
3: after second white on line (into operands) (flush white)
4: after putting out a .linefile, put out digits
5: parsing a string, then go to old-state
6: putting out \ escape in a "d string.
7: no longer used
8: no longer used
9: After seeing symbol char in state 3 (keep 1white after symchar)
10: After seeing whitespace in state 9 (keep white before symchar)
11: After seeing a symbol character in state 0 (eg a label definition)
-1: output string in out_string and go to the state in old_state
-2: flush text until a '*' '/' is seen, then go to state old_state
#ifdef TC_V850
12: After seeing a dash, looking for a second dash as a start
of comment.
#endif
#ifdef DOUBLEBAR_PARALLEL
13: After seeing a vertical bar, looking for a second
vertical bar as a parallel expression separator.
#endif
#ifdef TC_IA64
14: After seeing a `(' at state 0, looking for a `)' as
predicate.
15: After seeing a `(' at state 1, looking for a `)' as
predicate.
#endif
#ifdef TC_Z80
16: After seeing an 'a' or an 'A' at the start of a symbol
17: After seeing an 'f' or an 'F' in state 16
#endif
*/
/* I added states 9 and 10 because the MIPS ECOFF assembler uses
constructs like ``.loc 1 20''. This was turning into ``.loc
120''. States 9 and 10 ensure that a space is never dropped in
between characters which could appear in an identifier. Ian
Taylor, [email protected].
I added state 11 so that something like "Lfoo add %r25,%r26,%r27" works
correctly on the PA (and any other target where colons are optional).
Jeff Law, [email protected].
I added state 13 so that something like "cmp r1, r2 || trap #1" does not
get squashed into "cmp r1,r2||trap#1", with the all important space
between the 'trap' and the '#1' being eliminated. [email protected] */
/* This macro gets the next input character. */
#define GET() \
(from < fromend \
? * (unsigned char *) (from++) \
: (saved_input = NULL, \
fromlen = (*get) (input_buffer, sizeof input_buffer), \
from = input_buffer, \
fromend = from + fromlen, \
(fromlen == 0 \
? EOF \
: * (unsigned char *) (from++))))
/* This macro pushes a character back on the input stream. */
#define UNGET(uch) (*--from = (uch))
/* This macro puts a character into the output buffer. If this
character fills the output buffer, this macro jumps to the label
TOFULL. We use this rather ugly approach because we need to
handle two different termination conditions: EOF on the input
stream, and a full output buffer. It would be simpler if we
always read in the entire input stream before processing it, but
I don't want to make such a significant change to the assembler's
memory usage. */
#define PUT(pch) \
do \
{ \
*to++ = (pch); \
if (to >= toend) \
goto tofull; \
} \
while (0)
if (saved_input != NULL)
{
from = saved_input;
fromend = from + saved_input_len;
}
else
{
fromlen = (*get) (input_buffer, sizeof input_buffer);
if (fromlen == 0)
return 0;
from = input_buffer;
fromend = from + fromlen;
}
while (1)
{
/* The cases in this switch end with continue, in order to
branch back to the top of this while loop and generate the
next output character in the appropriate state. */
switch (state)
{
case -1:
ch = *out_string++;
if (*out_string == '\0')
{
state = old_state;
old_state = 3;
}
PUT (ch);
continue;
case -2:
for (;;)
{
do
{
ch = GET ();
if (ch == EOF)
{
as_warn (_("end of file in comment"));
goto fromeof;
}
if (ch == '\n')
PUT ('\n');
}
while (ch != '*');
while ((ch = GET ()) == '*')
;
if (ch == EOF)
{
as_warn (_("end of file in comment"));
goto fromeof;
}
if (ch == '/')
break;
UNGET (ch);
}
state = old_state;
UNGET (' ');
continue;
case 4:
ch = GET ();
if (ch == EOF)
goto fromeof;
else if (ch >= '0' && ch <= '9')
PUT (ch);
else
{
while (ch != EOF && IS_WHITESPACE (ch))
ch = GET ();
if (ch == '"')
{
quotechar = ch;
state = 5;
old_state = 3;
PUT (ch);
}
else
{
while (ch != EOF && ch != '\n')
ch = GET ();
state = 0;
PUT (ch);
}
}
continue;
case 5:
/* We are going to copy everything up to a quote character,
with special handling for a backslash. We try to
optimize the copying in the simple case without using the
GET and PUT macros. */
{
char *s;
int len;
for (s = from; s < fromend; s++)
{
ch = *s;
if (ch == '\\'
|| ch == quotechar
|| ch == '\n')
break;
}
len = s - from;
if (len > toend - to)
len = toend - to;
if (len > 0)
{
memcpy (to, from, len);
to += len;
from += len;
if (to >= toend)
goto tofull;
}
}
ch = GET ();
if (ch == EOF)
{
as_warn (_("end of file in string; '%c' inserted"), quotechar);
state = old_state;
UNGET ('\n');
PUT (quotechar);
}
else if (ch == quotechar)
{
state = old_state;
PUT (ch);
}
#ifndef NO_STRING_ESCAPES
else if (ch == '\\')
{
state = 6;
PUT (ch);
}
#endif
else if (scrub_m68k_mri && ch == '\n')
{
/* Just quietly terminate the string. This permits lines like
bne label loop if we haven't reach end yet. */
state = old_state;
UNGET (ch);
PUT ('\'');
}
else
{
PUT (ch);
}
continue;
case 6:
state = 5;
ch = GET ();
switch (ch)
{
/* Handle strings broken across lines, by turning '\n' into
'\\' and 'n'. */
case '\n':
UNGET ('n');
add_newlines++;
PUT ('\\');
continue;
case EOF:
as_warn (_("end of file in string; '%c' inserted"), quotechar);
PUT (quotechar);
continue;
case '"':
case '\\':
case 'b':
case 'f':
case 'n':
case 'r':
case 't':
case 'v':
case 'x':
case 'X':
case '0':
case '1':
case '2':
case '3':
case '4':
case '5':
case '6':
case '7':
break;
default:
#ifdef ONLY_STANDARD_ESCAPES
as_warn (_("unknown escape '\\%c' in string; ignored"), ch);
#endif
break;
}
PUT (ch);
continue;
#ifdef DOUBLEBAR_PARALLEL
case 13:
ch = GET ();
if (ch != '|')
abort ();
/* Reset back to state 1 and pretend that we are parsing a
line from just after the first white space. */
state = 1;
PUT ('|');
continue;
#endif
#ifdef TC_Z80
case 16:
/* We have seen an 'a' at the start of a symbol, look for an 'f'. */
ch = GET ();
if (ch == 'f' || ch == 'F')
{
state = 17;
PUT (ch);
}
else
{
state = 9;
break;
}
case 17:
/* We have seen "af" at the start of a symbol,
a ' here is a part of that symbol. */
ch = GET ();
state = 9;
if (ch == '\'')
/* Change to avoid warning about unclosed string. */
PUT ('`');
else
UNGET (ch);
break;
#endif
}
/* OK, we are somewhere in states 0 through 4 or 9 through 11. */
/* flushchar: */
ch = GET ();
#ifdef TC_IA64
if (ch == '(' && (state == 0 || state == 1))
{
state += 14;
PUT (ch);
continue;
}
else if (state == 14 || state == 15)
{
if (ch == ')')
{
state -= 14;
PUT (ch);
ch = GET ();
}
else
{
PUT (ch);
continue;
}
}
#endif
recycle:
#if defined TC_ARM && defined OBJ_ELF
/* We need to watch out for .symver directives. See the comment later
in this function. */
if (symver_state == NULL)
{
if ((state == 0 || state == 1) && ch == symver_pseudo[0])
symver_state = symver_pseudo + 1;
}
else
{
/* We advance to the next state if we find the right
character. */
if (ch != '\0' && (*symver_state == ch))
++symver_state;
else if (*symver_state != '\0')
/* We did not get the expected character, or we didn't
get a valid terminating character after seeing the
entire pseudo-op, so we must go back to the beginning. */
symver_state = NULL;
else
{
/* We've read the entire pseudo-op. If this is the end
of the line, go back to the beginning. */
if (IS_NEWLINE (ch))
symver_state = NULL;
}
}
#endif /* TC_ARM && OBJ_ELF */
#ifdef TC_M68K
/* We want to have pseudo-ops which control whether we are in
MRI mode or not. Unfortunately, since m68k MRI mode affects
the scrubber, that means that we need a special purpose
recognizer here. */
if (mri_state == NULL)
{
if ((state == 0 || state == 1)
&& ch == mri_pseudo[0])
mri_state = mri_pseudo + 1;
}
else
{
/* We advance to the next state if we find the right
character, or if we need a space character and we get any
whitespace character, or if we need a '0' and we get a
'1' (this is so that we only need one state to handle
``.mri 0'' and ``.mri 1''). */
if (ch != '\0'
&& (*mri_state == ch
|| (*mri_state == ' '
&& lex[ch] == LEX_IS_WHITESPACE)
|| (*mri_state == '0'
&& ch == '1')))
{
mri_last_ch = ch;
++mri_state;
}
else if (*mri_state != '\0'
|| (lex[ch] != LEX_IS_WHITESPACE
&& lex[ch] != LEX_IS_NEWLINE))
{
/* We did not get the expected character, or we didn't
get a valid terminating character after seeing the
entire pseudo-op, so we must go back to the
beginning. */
mri_state = NULL;
}
else
{
/* We've read the entire pseudo-op. mips_last_ch is
either '0' or '1' indicating whether to enter or
leave MRI mode. */
do_scrub_begin (mri_last_ch == '1');
mri_state = NULL;
/* We continue handling the character as usual. The
main gas reader must also handle the .mri pseudo-op
to control expression parsing and the like. */
}
}
#endif
if (ch == EOF)
{
if (state != 0)
{
as_warn (_("end of file not at end of a line; newline inserted"));
state = 0;
PUT ('\n');
}
goto fromeof;
}
switch (lex[ch])
{
case LEX_IS_WHITESPACE:
do
{
ch = GET ();
}
while (ch != EOF && IS_WHITESPACE (ch));
if (ch == EOF)
goto fromeof;
if (state == 0)
{
/* Preserve a single whitespace character at the
beginning of a line. */
state = 1;
UNGET (ch);
PUT (' ');
break;
}
#ifdef KEEP_WHITE_AROUND_COLON
if (lex[ch] == LEX_IS_COLON)
{
/* Only keep this white if there's no white *after* the
colon. */
ch2 = GET ();
UNGET (ch2);
if (!IS_WHITESPACE (ch2))
{
state = 9;
UNGET (ch);
PUT (' ');
break;
}
}
#endif
if (IS_COMMENT (ch)
|| ch == '/'
|| IS_LINE_SEPARATOR (ch)
|| IS_PARALLEL_SEPARATOR (ch))
{
if (scrub_m68k_mri)
{
/* In MRI mode, we keep these spaces. */
UNGET (ch);
PUT (' ');
break;
}
goto recycle;
}
/* If we're in state 2 or 11, we've seen a non-white
character followed by whitespace. If the next character
is ':', this is whitespace after a label name which we
normally must ignore. In MRI mode, though, spaces are
not permitted between the label and the colon. */
if ((state == 2 || state == 11)
&& lex[ch] == LEX_IS_COLON
&& ! scrub_m68k_mri)
{
state = 1;
PUT (ch);
break;
}
switch (state)
{
case 1:
/* We can arrive here if we leave a leading whitespace
character at the beginning of a line. */
goto recycle;
case 2:
state = 3;
if (to + 1 < toend)
{
/* Optimize common case by skipping UNGET/GET. */
PUT (' '); /* Sp after opco */
goto recycle;
}
UNGET (ch);
PUT (' ');
break;
case 3:
if (scrub_m68k_mri)
{
/* In MRI mode, we keep these spaces. */
UNGET (ch);
PUT (' ');
break;
}
goto recycle; /* Sp in operands */
case 9:
case 10:
if (scrub_m68k_mri)
{
/* In MRI mode, we keep these spaces. */
state = 3;
UNGET (ch);
PUT (' ');
break;
}
state = 10; /* Sp after symbol char */
goto recycle;
case 11:
if (LABELS_WITHOUT_COLONS || flag_m68k_mri)
state = 1;
else
{
/* We know that ch is not ':', since we tested that
case above. Therefore this is not a label, so it
must be the opcode, and we've just seen the
whitespace after it. */
state = 3;
}
UNGET (ch);
PUT (' '); /* Sp after label definition. */
break;
default:
BAD_CASE (state);
}
break;
case LEX_IS_TWOCHAR_COMMENT_1ST:
ch2 = GET ();
if (ch2 == '*')
{
for (;;)
{
do
{
ch2 = GET ();
if (ch2 != EOF && IS_NEWLINE (ch2))
add_newlines++;
}
while (ch2 != EOF && ch2 != '*');
while (ch2 == '*')
ch2 = GET ();
if (ch2 == EOF || ch2 == '/')
break;
/* This UNGET will ensure that we count newlines
correctly. */
UNGET (ch2);
}
if (ch2 == EOF)
as_warn (_("end of file in multiline comment"));
ch = ' ';
goto recycle;
}
#ifdef DOUBLESLASH_LINE_COMMENTS
else if (ch2 == '/')
{
do
{
ch = GET ();
}
while (ch != EOF && !IS_NEWLINE (ch));
if (ch == EOF)
as_warn ("end of file in comment; newline inserted");
state = 0;
PUT ('\n');
break;
}
#endif
else
{
if (ch2 != EOF)
UNGET (ch2);
if (state == 9 || state == 10)
state = 3;
PUT (ch);
}
break;
case LEX_IS_STRINGQUOTE:
quotechar = ch;
if (state == 10)
{
/* Preserve the whitespace in foo "bar". */
UNGET (ch);
state = 3;
PUT (' ');
/* PUT didn't jump out. We could just break, but we
know what will happen, so optimize a bit. */
ch = GET ();
old_state = 3;
}
else if (state == 9)
old_state = 3;
else
old_state = state;
state = 5;
PUT (ch);
break;
#ifndef IEEE_STYLE
case LEX_IS_ONECHAR_QUOTE:
if (state == 10)
{
/* Preserve the whitespace in foo 'b'. */
UNGET (ch);
state = 3;
PUT (' ');
break;
}
ch = GET ();
if (ch == EOF)
{
as_warn (_("end of file after a one-character quote; \\0 inserted"));
ch = 0;
}
if (ch == '\\')
{
ch = GET ();
if (ch == EOF)
{
as_warn (_("end of file in escape character"));
ch = '\\';
}
else
ch = process_escape (ch);
}
sprintf (out_buf, "%d", (int) (unsigned char) ch);
/* None of these 'x constants for us. We want 'x'. */
if ((ch = GET ()) != '\'')
{
#ifdef REQUIRE_CHAR_CLOSE_QUOTE
as_warn (_("missing close quote; (assumed)"));
#else
if (ch != EOF)
UNGET (ch);
#endif
}
if (strlen (out_buf) == 1)
{
PUT (out_buf[0]);
break;
}
if (state == 9)
old_state = 3;
else
old_state = state;
state = -1;
out_string = out_buf;
PUT (*out_string++);
break;
#endif
case LEX_IS_COLON:
#ifdef KEEP_WHITE_AROUND_COLON
state = 9;
#else
if (state == 9 || state == 10)
state = 3;
else if (state != 3)
state = 1;
#endif
PUT (ch);
break;
case LEX_IS_NEWLINE:
/* Roll out a bunch of newlines from inside comments, etc. */
if (add_newlines)
{
--add_newlines;
UNGET (ch);
}
/* Fall through. */
case LEX_IS_LINE_SEPARATOR:
state = 0;
PUT (ch);
break;
case LEX_IS_PARALLEL_SEPARATOR:
state = 1;
PUT (ch);
break;
#ifdef TC_V850
case LEX_IS_DOUBLEDASH_1ST:
ch2 = GET ();
if (ch2 != '-')
{
UNGET (ch2);
goto de_fault;
}
/* Read and skip to end of line. */
do
{
ch = GET ();
}
while (ch != EOF && ch != '\n');
if (ch == EOF)
as_warn (_("end of file in comment; newline inserted"));
state = 0;
PUT ('\n');
break;
#endif
#ifdef DOUBLEBAR_PARALLEL
case LEX_IS_DOUBLEBAR_1ST:
ch2 = GET ();
UNGET (ch2);
if (ch2 != '|')
goto de_fault;
/* Handle '||' in two states as invoking PUT twice might
result in the first one jumping out of this loop. We'd
then lose track of the state and one '|' char. */
state = 13;
PUT ('|');
break;
#endif
case LEX_IS_LINE_COMMENT_START:
/* FIXME-someday: The two character comment stuff was badly
thought out. On i386, we want '/' as line comment start
AND we want C style comments. hence this hack. The
whole lexical process should be reworked. xoxorich. */
if (ch == '/')
{
ch2 = GET ();
if (ch2 == '*')
{
old_state = 3;
state = -2;
break;
}
else
{
UNGET (ch2);
}
}
if (state == 0 || state == 1) /* Only comment at start of line. */
{
int startch;
startch = ch;
do
{
ch = GET ();
}
while (ch != EOF && IS_WHITESPACE (ch));
if (ch == EOF)
{
as_warn (_("end of file in comment; newline inserted"));
PUT ('\n');
break;
}
if (ch < '0' || ch > '9' || state != 0 || startch != '#')
{
/* Not a cpp line. */
while (ch != EOF && !IS_NEWLINE (ch))
ch = GET ();
if (ch == EOF)
as_warn (_("end of file in comment; newline inserted"));
state = 0;
PUT ('\n');
break;
}
/* Looks like `# 123 "filename"' from cpp. */
UNGET (ch);
old_state = 4;
state = -1;
if (scrub_m68k_mri)
out_string = "\tlinefile ";
else
out_string = "\t.linefile ";
PUT (*out_string++);
break;
}
#ifdef TC_D10V
/* All insns end in a char for which LEX_IS_SYMBOL_COMPONENT is true.
Trap is the only short insn that has a first operand that is
neither register nor label.
We must prevent exef0f ||trap #1 to degenerate to exef0f ||trap#1 .
We can't make '#' LEX_IS_SYMBOL_COMPONENT because it is
already LEX_IS_LINE_COMMENT_START. However, it is the
only character in line_comment_chars for d10v, hence we
can recognize it as such. */
/* An alternative approach would be to reset the state to 1 when
we see '||', '<'- or '->', but that seems to be overkill. */
if (state == 10)
PUT (' ');
#endif
/* We have a line comment character which is not at the
start of a line. If this is also a normal comment
character, fall through. Otherwise treat it as a default
character. */
if (strchr (tc_comment_chars, ch) == NULL
&& (! scrub_m68k_mri
|| (ch != '!' && ch != '*')))
goto de_fault;
if (scrub_m68k_mri
&& (ch == '!' || ch == '*' || ch == '#')
&& state != 1
&& state != 10)
goto de_fault;
/* Fall through. */
case LEX_IS_COMMENT_START:
#if defined TC_ARM && defined OBJ_ELF
/* On the ARM, `@' is the comment character.
Unfortunately this is also a special character in ELF .symver
directives (and .type, though we deal with those another way).
So we check if this line is such a directive, and treat
the character as default if so. This is a hack. */
if ((symver_state != NULL) && (*symver_state == 0))
goto de_fault;
#endif
#ifdef TC_ARM
/* For the ARM, care is needed not to damage occurrences of \@
by stripping the @ onwards. Yuck. */
if (to > tostart && *(to - 1) == '\\')
/* Do not treat the @ as a start-of-comment. */
goto de_fault;
#endif
#ifdef WARN_COMMENTS
if (!found_comment)
as_where (&found_comment_file, &found_comment);
#endif
do
{
ch = GET ();
}
while (ch != EOF && !IS_NEWLINE (ch));
if (ch == EOF)
as_warn (_("end of file in comment; newline inserted"));
state = 0;
PUT ('\n');
break;
case LEX_IS_SYMBOL_COMPONENT:
if (state == 10)
{
/* This is a symbol character following another symbol
character, with whitespace in between. We skipped
the whitespace earlier, so output it now. */
UNGET (ch);
state = 3;
PUT (' ');
break;
}
#ifdef TC_Z80
/* "af'" is a symbol containing '\''. */
if (state == 3 && (ch == 'a' || ch == 'A'))
{
state = 16;
PUT (ch);
ch = GET ();
if (ch == 'f' || ch == 'F')
{
state = 17;
PUT (ch);
break;
}
else
{
state = 9;
if (!IS_SYMBOL_COMPONENT (ch))
{
UNGET (ch);
break;
}
}
}
#endif
if (state == 3)
state = 9;
/* This is a common case. Quickly copy CH and all the
following symbol component or normal characters. */
if (to + 1 < toend
&& mri_state == NULL
#if defined TC_ARM && defined OBJ_ELF
&& symver_state == NULL
#endif
)
{
char *s;
int len;
for (s = from; s < fromend; s++)
{
int type;
ch2 = *(unsigned char *) s;
type = lex[ch2];
if (type != 0
&& type != LEX_IS_SYMBOL_COMPONENT)
break;
}
if (s > from)
/* Handle the last character normally, for
simplicity. */
--s;
len = s - from;
if (len > (toend - to) - 1)
len = (toend - to) - 1;
if (len > 0)
{
PUT (ch);
memcpy (to, from, len);
to += len;
from += len;
if (to >= toend)
goto tofull;
ch = GET ();
}
}
/* Fall through. */
default:
de_fault:
/* Some relatively `normal' character. */
if (state == 0)
{
state = 11; /* Now seeing label definition. */
}
else if (state == 1)
{
state = 2; /* Ditto. */
}
else if (state == 9)
{
if (!IS_SYMBOL_COMPONENT (ch))
state = 3;
}
else if (state == 10)
{
if (ch == '\\')
{
/* Special handling for backslash: a backslash may
be the beginning of a formal parameter (of a
macro) following another symbol character, with
whitespace in between. If that is the case, we
output a space before the parameter. Strictly
speaking, correct handling depends upon what the
macro parameter expands into; if the parameter
expands into something which does not start with
an operand character, then we don't want to keep
the space. We don't have enough information to
make the right choice, so here we are making the
choice which is more likely to be correct. */
if (to + 1 >= toend)
{
/* If we're near the end of the buffer, save the
character for the next time round. Otherwise
we'll lose our state. */
UNGET (ch);
goto tofull;
}
*to++ = ' ';
}
state = 3;
}
PUT (ch);
break;
}
}
/*NOTREACHED*/
fromeof:
/* We have reached the end of the input. */
return to - tostart;
tofull:
/* The output buffer is full. Save any input we have not yet
processed. */
if (fromend > from)
{
saved_input = from;
saved_input_len = fromend - from;
}
else
saved_input = NULL;
return to - tostart;
}
static PRStatus
GetInt(ScanfState *state, int code)
{
char buf[FMAX + 1], *p;
int ch;
static const char digits[] = "0123456789abcdefABCDEF";
PRBool seenDigit = PR_FALSE;
int base;
int dlen;
switch (code) {
case 'd': case 'u':
base = 10;
break;
case 'i':
base = 0;
break;
case 'x': case 'X': case 'p':
base = 16;
break;
case 'o':
base = 8;
break;
default:
return PR_FAILURE;
}
if (state->width == 0 || state->width > FMAX) {
state->width = FMAX;
}
p = buf;
GET_IF_WITHIN_WIDTH(state, ch);
if (WITHIN_WIDTH(state) && (ch == '+' || ch == '-')) {
*p++ = ch;
GET_IF_WITHIN_WIDTH(state, ch);
}
if (WITHIN_WIDTH(state) && ch == '0') {
seenDigit = PR_TRUE;
*p++ = ch;
GET_IF_WITHIN_WIDTH(state, ch);
if (WITHIN_WIDTH(state)
&& (ch == 'x' || ch == 'X')
&& (base == 0 || base == 16)) {
base = 16;
*p++ = ch;
GET_IF_WITHIN_WIDTH(state, ch);
} else if (base == 0) {
base = 8;
}
}
if (base == 0 || base == 10) {
dlen = 10;
} else if (base == 8) {
dlen = 8;
} else {
PR_ASSERT(base == 16);
dlen = 16 + 6; /* 16 digits, plus 6 in uppercase */
}
while (WITHIN_WIDTH(state) && memchr(digits, ch, dlen)) {
*p++ = ch;
GET_IF_WITHIN_WIDTH(state, ch);
seenDigit = PR_TRUE;
}
if (WITHIN_WIDTH(state)) {
UNGET(state, ch);
}
if (!seenDigit) {
return PR_FAILURE;
}
*p = '\0';
if (state->assign) {
if (code == 'd' || code == 'i') {
if (state->sizeSpec == _PR_size_ll) {
PRInt64 llval = _pr_strtoull(buf, NULL, base);
*va_arg(state->ap, PRInt64 *) = llval;
} else {
long lval = strtol(buf, NULL, base);
if (state->sizeSpec == _PR_size_none) {
*va_arg(state->ap, PRIntn *) = lval;
} else if (state->sizeSpec == _PR_size_h) {
/*
* Actual conversion; called from iconv()
*/
size_t
_icv_iconv(int* cd, char **inbuf, size_t *inbytesleft,
char **outbuf, size_t *outbytesleft)
{
unsigned char *ip, ic, *op, offset;
size_t ileft, oleft;
size_t retval = 0;
static unsigned char map[256] = {
0x00 , 0x01 , 0x02 , 0x03 , 0x04 , 0x05 , 0x06 , 0x07 , 0x08 , 0x09 ,
0x0A , 0x0B , 0x0C , 0x0D , 0x0E , 0x0F , 0x10 , 0x11 , 0x12 , 0x13 ,
0x14 , 0x15 , 0x16 , 0x17 , 0x18 , 0x19 , 0x7F , 0x1B , 0x1A , 0x1D ,
0x1E , 0x1F , 0x20 , 0x21 , 0x22 , 0x23 , 0x24 , 0x25 , 0x26 , 0x27 ,
0x28 , 0x29 , 0x2A , 0x2B , 0x2C , 0x2D , 0x2E , 0x2F , 0x30 , 0x31 ,
0x32 , 0x33 , 0x34 , 0x35 , 0x36 , 0x37 , 0x38 , 0x39 , 0x3A , 0x3B ,
0x3C , 0x3D , 0x3E , 0x3F , 0x40 , 0x41 , 0x42 , 0x43 , 0x44 , 0x45 ,
0x46 , 0x47 , 0x48 , 0x49 , 0x4A , 0x4B , 0x4C , 0x4D , 0x4E , 0x4F ,
0x50 , 0x51 , 0x52 , 0x53 , 0x54 , 0x55 , 0x56 , 0x57 , 0x58 , 0x59 ,
0x5A , 0x5B , 0x5C , 0x5D , 0x5E , 0x5F , 0x60 , 0x61 , 0x62 , 0x63 ,
0x64 , 0x65 , 0x66 , 0x67 , 0x68 , 0x69 , 0x6A , 0x6B , 0x6C , 0x6D ,
0x6E , 0x6F , 0x70 , 0x71 , 0x72 , 0x73 , 0x74 , 0x75 , 0x76 , 0x77 ,
0x78 , 0x79 , 0x7A , 0x7B , 0x7C , 0x7D , 0x7E , 0x1C , 0x1A , 0x1A ,
0x1A , 0x1A , 0x1A , 0x1A , 0x1A , 0x1A , 0x1A , 0x1A , 0x1A , 0x1A ,
0x1A , 0x1A , 0x1A , 0x1A , 0x1A , 0x1A , 0x1A , 0x1A , 0x1A , 0x1A ,
0x1A , 0x1A , 0x1A , 0x1A , 0x1A , 0x1A , 0x1A , 0x1A , 0x1A , 0x1A ,
0xFF , 0xAD , 0xBD , 0x9C , 0xCF , 0xBE , 0xDD , 0xF5 , 0xF9 , 0xB8 ,
0xA6 , 0xAE , 0xAA , 0xF0 , 0xA9 , 0xEE , 0xF8 , 0xF1 , 0xFD , 0xFC ,
0xEF , 0xE6 , 0xF4 , 0xFA , 0xF7 , 0xFB , 0xA7 , 0xAF , 0xAC , 0xAB ,
0xF3 , 0xA8 , 0xB7 , 0xB5 , 0xB6 , 0xC7 , 0x8E , 0x8F , 0x92 , 0x80 ,
0xD4 , 0x90 , 0xD2 , 0xD3 , 0xDE , 0xD6 , 0xD7 , 0xD8 , 0xD1 , 0xA5 ,
0xE3 , 0xE0 , 0xE2 , 0xE5 , 0x99 , 0x9E , 0x9D , 0xEB , 0xE9 , 0xEA ,
0x9A , 0xED , 0xE8 , 0xE1 , 0x85 , 0xA0 , 0x83 , 0xC6 , 0x84 , 0x86 ,
0x91 , 0x87 , 0x8A , 0x82 , 0x88 , 0x89 , 0x8D , 0xA1 , 0x8C , 0x8B ,
0xD0 , 0xA4 , 0x95 , 0xA2 , 0x93 , 0xE4 , 0x94 , 0xF6 , 0x9B , 0x97 ,
0xA3 , 0x96 , 0x81 , 0xEC , 0xE7 , 0x98 };
if (!cd || cd != (int*)MAGIC_NUMBER)
{
errno = EBADF;
return((size_t)ERR_RETURN);
}
if ((inbuf == 0) || (*inbuf == 0))
return((size_t)0);
ip = (unsigned char*)*inbuf;
op = (unsigned char *)*outbuf;
ileft = *inbytesleft;
oleft = *outbytesleft;
offset = 0;
/*
* Main loop; basically 1 loop per 1 input byte
*/
while (ileft > 0) {
GET(ic);
if (oleft < 1) {
UNGET();
errno = E2BIG;
retval = ERR_RETURN;
goto ret;
}
PUT(map[ic]);
retval++;
}
ret:
*inbuf = (char *)ip;
*inbytesleft = ileft;
*outbuf = (char *)op;
*outbytesleft = oleft;
return (retval);
}
/** Gets the Lexical symbol corresponding to the next non-whitespace character in the searchstr. */
Lexical
LEX(void)
{
int Ch;
do {
Ch = GET();
} while (isspace(Ch));
switch (Ch) {
case EOF:
return EndT;
case '|':
return BarT;
case '(':
return LParT;
case ')':
return RParT;
case '[':
return LBrT;
case ']':
return RBrT;
case '0':
return ZeroT;
case '1':
return OneT;
case '*':
return StarT;
case '+':
return PlusT;
case '=':
return EqualT;
case ',':
return CommaT;
}
if (isalpha(Ch) || Ch == '_' || Ch == '$') {
for (LastW = ChP; isalnum(Ch) || Ch == '_' || Ch == '$'; ChP++) {
if (ChP - ChArr == MAX_CHAR) {
Rprintf("Out of character space.\n");
rcqp_receive_error(1);
}
*ChP = Ch;
Ch = GET();
}
if (Ch != EOF)
UNGET(Ch);
if (ChP - ChArr == MAX_CHAR) {
Rprintf("Out of character space.\n");
rcqp_receive_error(1);
}
*ChP++ = '\0';
return IdenT;
}
else if (Ch == '"') {
Ch = GET();
for (LastW = ChP; Ch != '"' && Ch != EOF; ChP++) {
if (ChP - ChArr == MAX_CHAR) {
Rprintf("Out of character space.\n");
rcqp_receive_error(1);
}
*ChP = Ch;
Ch = GET();
}
if (Ch == EOF) {
Rprintf("Missing closing \".\n");
rcqp_receive_error(1);
}
if (ChP - ChArr == MAX_CHAR) {
Rprintf("Out of character space.\n");
rcqp_receive_error(1);
}
*ChP++ = '\0';
return IdenT;
}
else {
REGEX2DFA_ERROR("extra character %c", Ch);
return EndT;
}
}