USB_DEVICE_CDC_EVENT_RESPONSE APP_USBDeviceCDCEventHandler
(
USB_DEVICE_CDC_INDEX index ,
USB_DEVICE_CDC_EVENT event ,
void * pData,
uintptr_t userData
)
{
APP2_DATA * app2DataObject;
app2DataObject = (APP2_DATA *)userData;
USB_CDC_CONTROL_LINE_STATE * controlLineStateData;
switch ( event )
{
case USB_DEVICE_CDC_EVENT_GET_LINE_CODING:
/* This means the host wants to know the current line
* coding. This is a control transfer request. Use the
* USB_DEVICE_ControlSend() function to send the data to
* host. */
USB_DEVICE_ControlSend(app2DataObject->deviceHandle,
&app2DataObject->getLineCodingData, sizeof(USB_CDC_LINE_CODING));
break;
case USB_DEVICE_CDC_EVENT_SET_LINE_CODING:
/* This means the host wants to set the line coding.
* This is a control transfer request. Use the
* USB_DEVICE_ControlReceive() function to receive the
* data from the host */
USB_DEVICE_ControlReceive(app2DataObject->deviceHandle,
&app2DataObject->setLineCodingData, sizeof(USB_CDC_LINE_CODING));
break;
case USB_DEVICE_CDC_EVENT_SET_CONTROL_LINE_STATE:
/* This means the host is setting the control line state.
* Read the control line state. We will accept this request
* for now. */
controlLineStateData = (USB_CDC_CONTROL_LINE_STATE *)pData;
app2DataObject->controlLineStateData.dtr = controlLineStateData->dtr;
app2DataObject->controlLineStateData.carrier = controlLineStateData->carrier;
USB_DEVICE_ControlStatus(app2DataObject->deviceHandle, USB_DEVICE_CONTROL_STATUS_OK);
break;
case USB_DEVICE_CDC_EVENT_SEND_BREAK:
/* This means that the host is requesting that a break of the
* specified duration be sent. Read the break duration */
app2DataObject->breakData = ((USB_DEVICE_CDC_EVENT_DATA_SEND_BREAK *)pData)->breakDuration;
/* Complete the control transfer by sending a ZLP */
USB_DEVICE_ControlStatus(app2DataObject->deviceHandle, USB_DEVICE_CONTROL_STATUS_OK);
break;
case USB_DEVICE_CDC_EVENT_READ_COMPLETE:
/* This means that the host has sent some data*/
//SYS_CONSOLE_MESSAGE("Read flag set\n");
app2DataObject->isReadComplete = true;
break;
case USB_DEVICE_CDC_EVENT_CONTROL_TRANSFER_DATA_RECEIVED:
/* The data stage of the last control transfer is
* complete. For now we accept all the data */
USB_DEVICE_ControlStatus(app2DataObject->deviceHandle, USB_DEVICE_CONTROL_STATUS_OK);
break;
case USB_DEVICE_CDC_EVENT_CONTROL_TRANSFER_DATA_SENT:
/* This means the GET LINE CODING function data is valid. We dont
* do much with this data in this demo. */
break;
case USB_DEVICE_CDC_EVENT_WRITE_COMPLETE:
/* This means that the data write got completed. We can schedule
* the next read. */
app2DataObject->isWriteComplete = true;
break;
default:
break;
}
return USB_DEVICE_CDC_EVENT_RESPONSE_NONE;
}
void APP_USBDeviceHIDEventHandler(USB_DEVICE_HID_INDEX hidInstance,
USB_DEVICE_HID_EVENT event, void * eventData, uintptr_t userData)
{
APP_DATA * appData = (APP_DATA *)userData;
switch(event)
{
case USB_DEVICE_HID_EVENT_REPORT_SENT:
/* This means the mouse report was sent.
We are free to send another report */
appData->isMouseReportSendBusy = false;
break;
case USB_DEVICE_HID_EVENT_REPORT_RECEIVED:
/* Dont care for other event in this demo */
break;
case USB_DEVICE_HID_EVENT_SET_IDLE:
/* Acknowledge the Control Write Transfer */
USB_DEVICE_ControlStatus(appData->deviceHandle, USB_DEVICE_CONTROL_STATUS_OK);
/* save Idle rate received from Host */
appData->idleRate = ((USB_DEVICE_HID_EVENT_DATA_SET_IDLE*)eventData)->duration;
break;
case USB_DEVICE_HID_EVENT_GET_IDLE:
/* Host is requesting for Idle rate. Now send the Idle rate */
USB_DEVICE_ControlSend(appData->deviceHandle, &(appData->idleRate),1);
/* On successfully receiving Idle rate, the Host would acknowledge back with a
Zero Length packet. The HID function driver returns an event
USB_DEVICE_HID_EVENT_CONTROL_TRANSFER_DATA_SENT to the application upon
receiving this Zero Length packet from Host.
USB_DEVICE_HID_EVENT_CONTROL_TRANSFER_DATA_SENT event indicates this control transfer
event is complete */
break;
case USB_DEVICE_HID_EVENT_SET_PROTOCOL:
/* Host is trying set protocol. Now receive the protocol and save */
appData->activeProtocol = *(USB_HID_PROTOCOL_CODE *)eventData;
/* Acknowledge the Control Write Transfer */
USB_DEVICE_ControlStatus(appData->deviceHandle, USB_DEVICE_CONTROL_STATUS_OK);
break;
case USB_DEVICE_HID_EVENT_GET_PROTOCOL:
/* Host is requesting for Current Protocol. Now send the Idle rate */
USB_DEVICE_ControlSend(appData->deviceHandle, &(appData->activeProtocol), 1);
/* On successfully receiving Idle rate, the Host would acknowledge
back with a Zero Length packet. The HID function driver returns
an event USB_DEVICE_HID_EVENT_CONTROL_TRANSFER_DATA_SENT to the
application upon receiving this Zero Length packet from Host.
USB_DEVICE_HID_EVENT_CONTROL_TRANSFER_DATA_SENT event indicates
this control transfer event is complete */
break;
case USB_DEVICE_HID_EVENT_CONTROL_TRANSFER_DATA_SENT:
break;
default:
break;
}
}
/* Function:
void _USB_DEVICE_AUDIO_SetupPacketHandler
(
USB_DEVICE_AUDIO_INDEX iAudio ,
USB_SETUP_PACKET * setupPkt
)
Summary:
Handles a fresh SETUP packet received from Host.
Description:
Handles a fresh SETUP packet received from Host.
Returns:
This is a local function and should not be called directly by the
application.
*/
void _USB_DEVICE_AUDIO_SetupPacketHandler
(
USB_DEVICE_AUDIO_INDEX iAudio ,
USB_SETUP_PACKET * setupPkt
)
{
uint8_t audioControlInterfaceId;
uint8_t interfaceId;
uint8_t curAlternateSetting;
uint8_t prevAlternateSetting;
uint8_t streamIntfcIndex;
uint8_t noOfEndpoints;
USB_ENDPOINT ep;
uint16_t maxPacketSize;
USB_DEVICE_HANDLE usbDeviceHandle;
USB_DEVICE_AUDIO_EVENT event;
USB_DEVICE_AUDIO_EVENT_DATA_INTERFACE_SETTING_CHANGED interfaceInfo;
USB_ERROR endpointEnableResult;
USB_DEVICE_AUDIO_STREAMING_INTERFACE_ALTERNATE_SETTING *pCurAlternateStng;
USB_DEVICE_AUDIO_STREAMING_INTERFACE_ALTERNATE_SETTING *pPrevAlternateStng;
USB_DEVICE_AUDIO_STREAMING_INTERFACE *pStreamingInterface;
uint16_t adjustedMaxPacketSize =1;
/* Obtain pointer to the Audio Instance that is being addressed*/
USB_DEVICE_AUDIO_INSTANCE* audioInstance = &gUsbDeviceAudioInstance[iAudio];
/* Obtain pointer to the Audio Interface collection*/
USB_DEVICE_AUDIO_INTERFACE_COLLECTION *curInfCollection =
&(audioInstance->infCollection);
/* Get the Device Layer handle */
usbDeviceHandle = gUsbDeviceAudioInstance[iAudio].devLayerHandle;
/* Check if the request is a standard interface request*/
if ( (setupPkt->RequestType == USB_SETUP_REQUEST_TYPE_STANDARD)
&& (setupPkt->Recipient == USB_SETUP_REQUEST_RECIPIENT_INTERFACE))
{
/* We have received Standard Set request */
/* retrieve interface number from the Setup packet */
interfaceId = setupPkt->bIntfID;
/* retrieve audio Control interface number*/
audioControlInterfaceId = curInfCollection->bControlInterfaceNum;
switch(setupPkt->bRequest)
{
case USB_REQUEST_SET_INTERFACE:
curAlternateSetting = setupPkt->bAltID;
if (interfaceId == audioControlInterfaceId)
{
/*SET INTERFACE command was received to Audio Control
Interface */
curInfCollection->bControlAltSetng = curAlternateSetting;
}
else
{
/*An Audio Streaming interface has received SET INTERFACE
command */
streamIntfcIndex = interfaceId - audioControlInterfaceId - 1;
/* Get pointer to the current audio streaming interface */
pStreamingInterface = &(curInfCollection->streamInf[streamIntfcIndex]);
/* Get pointer to the Interface Alternate setting. */
pCurAlternateStng
= &(pStreamingInterface->alterntSetting[curAlternateSetting]);
/* Find out how many endpoint are present for this Interface
* Alternate setting */
noOfEndpoints = pCurAlternateStng->numEndPoints;
if ((noOfEndpoints) && (curAlternateSetting))
{
/* We have to enable the endpoint only if this alternate
setting has at least one endpoint and the alternate
setting is a non zero value */
/*Retrieve endpoint size */
ep = pCurAlternateStng->isoDataEp.epAddr;
/* retrieve max packet size. */
maxPacketSize
= pCurAlternateStng->isoDataEp.epMaxPacketSize;
/* maxpacket size should be adjusted to upper power of
two. As per the PIC32MZ USB module requirement.*/
if (maxPacketSize)
{
while(adjustedMaxPacketSize < maxPacketSize)
adjustedMaxPacketSize <<= 1;
}
else
adjustedMaxPacketSize = 0;
/* Enable Isochronous Data Endpoint */
endpointEnableResult = USB_DEVICE_EndpointEnable
(
usbDeviceHandle ,
0,
ep ,
USB_TRANSFER_TYPE_ISOCHRONOUS ,
adjustedMaxPacketSize
);
if (endpointEnableResult != USB_ERROR_NONE)
{
SYS_ASSERT (false, "Endpoint not Enabled");
}
if (noOfEndpoints == 2)
{
/* If number of Endpoints is Two, then it is sure
* that this alternate setting reports a Isochronous
* Sync Endpoint. Enable the Sync Endpoint. */
}
//Change Audio Instance object state to Initialized.
pStreamingInterface->state
= USB_DEVICE_AUDIO_STRMNG_INTFC_INITIALIZED;
}
else //alternateSetting = 0
{
if (pStreamingInterface->state
== USB_DEVICE_AUDIO_STRMNG_INTFC_INITIALIZED)
{
//Disable the Endpoint in the previous Active Alternate setting.
prevAlternateSetting = pStreamingInterface->activeSetting;
//get a pointer to the previous alternate setting.
pPrevAlternateStng = &(pStreamingInterface->alterntSetting[prevAlternateSetting]);
//Get endpoint no of the previous alternate setting
ep = pPrevAlternateStng->isoDataEp.epAddr;
//Disable the Endpoint
USB_DEVICE_EndpointDisable(usbDeviceHandle ,ep);
if (noOfEndpoints == 2)
{
/* If number of Endpoints is Two, then it is sure
* that this alternate setting reports a Isochronous
* Sync Endpoint. Disable the Sync Endpoint. */
}
curInfCollection->streamInf[streamIntfcIndex].state
= USB_DEVICE_AUDIO_STRMNG_INTFC_NOT_INITIALIZED;
USB_DEVICE_IRPCancelAll(usbDeviceHandle, ep);
}
}
/* Remember the new alternate setting received */
curInfCollection->streamInf[streamIntfcIndex].activeSetting
= curAlternateSetting;
/* Notify application about the SET_INTERFACE request */
interfaceInfo.interfaceNumber = interfaceId;
interfaceInfo.interfaceAlternateSetting = curAlternateSetting;
audioInstance->appEventCallBack
(
iAudio,
USB_DEVICE_AUDIO_EVENT_INTERFACE_SETTING_CHANGED,
&interfaceInfo,
0
);
}
/* Send an Acknowledgement to the Host */
USB_DEVICE_ControlStatus( usbDeviceHandle,
USB_DEVICE_CONTROL_STATUS_OK);
break;
case USB_REQUEST_GET_INTERFACE:
if (interfaceId == audioControlInterfaceId)
{
curAlternateSetting = curInfCollection->bControlAltSetng;
}
else
{
streamIntfcIndex = interfaceId - audioControlInterfaceId - 1;
curAlternateSetting
= curInfCollection->streamInf[streamIntfcIndex].activeSetting;
}
USB_DEVICE_ControlSend( usbDeviceHandle,
(void *)&curAlternateSetting, 1);
break;
default:
break;
}
}//end of if((setupPkt->bmRequestType ==
else if ( (setupPkt->RequestType == USB_SETUP_REQUEST_TYPE_CLASS )
&& (setupPkt->Recipient == USB_SETUP_REQUEST_RECIPIENT_INTERFACE))
{
/* We have recived a Audio Class specific Interface request */
switch (setupPkt->bRequest)
{
case USB_AUDIO_CS_SET_CUR:
event = USB_DEVICE_AUDIO_EVENT_CONTROL_SET_CUR;
break;
case USB_AUDIO_CS_GET_CUR:
event = USB_DEVICE_AUDIO_EVENT_CONTROL_GET_CUR;
break;
case USB_AUDIO_CS_SET_MIN:
event = USB_DEVICE_AUDIO_EVENT_CONTROL_SET_MIN;
break;
case USB_AUDIO_CS_GET_MIN:
event = USB_DEVICE_AUDIO_EVENT_CONTROL_GET_MIN;
break;
case USB_AUDIO_CS_SET_MAX:
event = USB_DEVICE_AUDIO_EVENT_CONTROL_SET_MAX;
break;
case USB_AUDIO_CS_GET_MAX:
event = USB_DEVICE_AUDIO_EVENT_CONTROL_GET_MAX;
break;
case USB_AUDIO_CS_SET_RES:
event = USB_DEVICE_AUDIO_EVENT_CONTROL_SET_RES;
break;
case USB_AUDIO_CS_GET_RES:
event = USB_DEVICE_AUDIO_EVENT_CONTROL_GET_RES;
break;
case USB_AUDIO_CS_SET_MEM:
event = USB_DEVICE_AUDIO_EVENT_ENTITY_SET_MEM;
break;
case USB_AUDIO_CS_GET_MEM:
event = USB_DEVICE_AUDIO_EVENT_ENTITY_GET_MEM;
break;
case USB_AUDIO_CS_GET_STAT:
event = USB_DEVICE_AUDIO_EVENT_ENTITY_GET_STAT;
break;
default:
/* Unknown request. Stall the request */
event = 0;
USB_DEVICE_ControlStatus(audioInstance->devLayerHandle,
USB_DEVICE_CONTROL_STATUS_ERROR);
}
if (( audioInstance->appEventCallBack) && (event))
{
/* inform the application about the request */
/* the application needs to handle both EP and entity specific
requests */
audioInstance->appEventCallBack ( iAudio, event, setupPkt, 0);
}
}// end of else if
}//end of function _USB_DEVICE_AUDIO_SetupPacketHandler
USB_DEVICE_CDC_EVENT_RESPONSE APP_USBDeviceCDCEventHandler
(
USB_DEVICE_CDC_INDEX index ,
USB_DEVICE_CDC_EVENT event ,
void* pData,
uintptr_t userData
)
{
APP_DATA * appDataObject;
appDataObject = (APP_DATA *)userData;
USB_CDC_CONTROL_LINE_STATE * controlLineStateData;
uint16_t * breakData;
switch ( event )
{
case USB_DEVICE_CDC_EVENT_GET_LINE_CODING:
/* This means the host wants to know the current line
* coding. This is a control transfer request. Use the
* USB_DEVICE_ControlSend() function to send the data to
* host. */
USB_DEVICE_ControlSend(appDataObject->deviceHandle,
&appDataObject->getLineCodingData, sizeof(USB_CDC_LINE_CODING));
break;
case USB_DEVICE_CDC_EVENT_SET_LINE_CODING:
/* This means the host wants to set the line coding.
* This is a control transfer request. Use the
* USB_DEVICE_ControlReceive() function to receive the
* data from the host */
USB_DEVICE_ControlReceive(appDataObject->deviceHandle,
&appDataObject->setLineCodingData, sizeof(USB_CDC_LINE_CODING));
break;
case USB_DEVICE_CDC_EVENT_SET_CONTROL_LINE_STATE:
/* This means the host is setting the control line state.
* Read the control line state. We will accept this request
* for now. */
controlLineStateData = (USB_CDC_CONTROL_LINE_STATE *)pData;
appDataObject->controlLineStateData.dtr = controlLineStateData->dtr;
appDataObject->controlLineStateData.carrier =
controlLineStateData->carrier;
USB_DEVICE_ControlStatus(appDataObject->deviceHandle, USB_DEVICE_CONTROL_STATUS_OK);
break;
case USB_DEVICE_CDC_EVENT_SEND_BREAK:
/* This means that the host is requesting that a break of the
* specified duration be sent. Read the break duration */
breakData = (uint16_t *)pData;
appDataObject->breakData = *breakData;
break;
case USB_DEVICE_CDC_EVENT_READ_COMPLETE:
/* This means that the host has sent some data*/
appDataObject->isReadComplete = true;
appDataObject->readLength =
((USB_DEVICE_CDC_EVENT_DATA_READ_COMPLETE*)pData)->length;
break;
case USB_DEVICE_CDC_EVENT_CONTROL_TRANSFER_DATA_RECEIVED:
/* The data stage of the last control transfer is
* complete. We have received the line coding from the host. Call
* the usart driver routine to change the baud. We can call this
* function here as it is not blocking. */
DRV_USART_BaudSet(appDataObject->usartHandle, appDataObject->setLineCodingData.dwDTERate);
USB_DEVICE_ControlStatus(appDataObject->deviceHandle, USB_DEVICE_CONTROL_STATUS_OK);
break;
case USB_DEVICE_CDC_EVENT_CONTROL_TRANSFER_DATA_SENT:
/* This means the GET LINE CODING function data is valid. We dont
* do much with this data in this demo. */
break;
case USB_DEVICE_CDC_EVENT_WRITE_COMPLETE:
/* This means that the data write got completed. We can schedule
* the next read. */
break;
default:
break;
}
return USB_DEVICE_CDC_EVENT_RESPONSE_NONE;
}
USB_DEVICE_HID_EVENT_RESPONSE APP_USBDeviceHIDEventHandler
(
USB_DEVICE_HID_INDEX iHID,
USB_DEVICE_HID_EVENT event,
void * eventData,
uintptr_t userData
)
{
USB_DEVICE_HID_EVENT_DATA_REPORT_SENT * reportSent;
USB_DEVICE_HID_EVENT_DATA_REPORT_RECEIVED * reportReceived;
/* Check type of event */
switch (event)
{
case USB_DEVICE_HID_EVENT_REPORT_SENT:
/* The eventData parameter will be USB_DEVICE_HID_EVENT_REPORT_SENT
* pointer type containing details about the report that was
* sent. */
reportSent = (USB_DEVICE_HID_EVENT_DATA_REPORT_SENT *) eventData;
if(reportSent->handle == appData.txTransferHandle )
{
// Transfer progressed.
appData.hidDataTransmitted = true;
}
break;
case USB_DEVICE_HID_EVENT_REPORT_RECEIVED:
/* The eventData parameter will be USB_DEVICE_HID_EVENT_REPORT_RECEIVED
* pointer type containing details about the report that was
* received. */
reportReceived = (USB_DEVICE_HID_EVENT_DATA_REPORT_RECEIVED *) eventData;
if(reportReceived->handle == appData.rxTransferHandle )
{
// Transfer progressed.
appData.hidDataReceived = true;
}
break;
case USB_DEVICE_HID_EVENT_SET_IDLE:
/* For now we just accept this request as is. We acknowledge
* this request using the USB_DEVICE_HID_ControlStatus()
* function with a USB_DEVICE_CONTROL_STATUS_OK flag */
USB_DEVICE_ControlStatus(appData.usbDevHandle, USB_DEVICE_CONTROL_STATUS_OK);
/* Save Idle rate recieved from Host */
appData.idleRate = ((USB_DEVICE_HID_EVENT_DATA_SET_IDLE*)eventData)->duration;
break;
case USB_DEVICE_HID_EVENT_GET_IDLE:
/* Host is requesting for Idle rate. Now send the Idle rate */
USB_DEVICE_ControlSend(appData.usbDevHandle, & (appData.idleRate),1);
/* On successfully reciveing Idle rate, the Host would acknowledge back with a
Zero Length packet. The HID function drvier returns an event
USB_DEVICE_HID_EVENT_CONTROL_TRANSFER_DATA_SENT to the application upon
receiving this Zero Length packet from Host.
USB_DEVICE_HID_EVENT_CONTROL_TRANSFER_DATA_SENT event indicates this control transfer
event is complete */
break;
default:
// Nothing to do.
break;
}
return USB_DEVICE_HID_EVENT_RESPONSE_NONE;
}
