C++ (Cpp) USB_NotConfigured_LED示例

示例#1

文件： usb_prop.c 项目： LaazV/MBLed

/*******************************************************************************
* Function Name  : MASS_Reset
* Description    : Mass Storage reset routine.
* Input          : None.
* Output         : None.
* Return         : None.
*******************************************************************************/
void MASS_Reset()
{
  /* Set the device as not configured */
  Device_Info.Current_Configuration = 0;

  /* Current Feature initialization */
  pInformation->Current_Feature = MASS_ConfigDescriptor[7];

#ifdef STM32F10X_CL   
  
  /* EP0 is already configured by USB_SIL_Init() function */

  /* Init EP1 IN as Bulk endpoint */
  OTG_DEV_EP_Init(EP1_IN, OTG_DEV_EP_TYPE_BULK, BULK_MAX_PACKET_SIZE);
  
  /* Init EP2 OUT as Bulk endpoint */
  OTG_DEV_EP_Init(EP2_OUT, OTG_DEV_EP_TYPE_BULK, BULK_MAX_PACKET_SIZE); 
  
#else 

  SetBTABLE(BTABLE_ADDRESS);

  /* Initialize Endpoint 0 */
  SetEPType(ENDP0, EP_CONTROL);
  SetEPTxStatus(ENDP0, EP_TX_NAK);
  SetEPRxAddr(ENDP0, ENDP0_RXADDR);
  SetEPRxCount(ENDP0, Device_Property.MaxPacketSize);
  SetEPTxAddr(ENDP0, ENDP0_TXADDR);
  Clear_Status_Out(ENDP0);
  SetEPRxValid(ENDP0);

  /* Initialize Endpoint 1 */
  SetEPType(ENDP1, EP_BULK);
  SetEPTxAddr(ENDP1, ENDP1_TXADDR);
  SetEPTxStatus(ENDP1, EP_TX_NAK);
  SetEPRxStatus(ENDP1, EP_RX_DIS);

  /* Initialize Endpoint 2 */
  SetEPType(ENDP2, EP_BULK);
  SetEPRxAddr(ENDP2, ENDP2_RXADDR);
  SetEPRxCount(ENDP2, Device_Property.MaxPacketSize);
  SetEPRxStatus(ENDP2, EP_RX_VALID);
  SetEPTxStatus(ENDP2, EP_TX_DIS);


  SetEPRxCount(ENDP0, Device_Property.MaxPacketSize);
  SetEPRxValid(ENDP0);

  /* Set the device to response on default address */
  SetDeviceAddress(0);
#endif /* STM32F10X_CL */

  bDeviceState = ATTACHED;

  CBW.dSignature = BOT_CBW_SIGNATURE;
  Bot_State = BOT_IDLE;

  USB_NotConfigured_LED();
}

示例#2

文件： usb_prop.c 项目： neirons/pythondatalogger

/*******************************************************************************
* Function Name  : MASS_Reset
* Description    : Mass Storage reset routine.
* Input          : None.
* Output         : None.
* Return         : None.
*******************************************************************************/
void MASS_Reset()
{
  /* Set the device as not configured */
  Device_Info.Current_Configuration = 0;

  /* Current Feature initialization */
  pInformation->Current_Feature = MASS_ConfigDescriptor[7];

  SetBTABLE(BTABLE_ADDRESS);

  /* Initialize Endpoint 0 */
  SetEPType(ENDP0, EP_CONTROL);
  SetEPTxStatus(ENDP0, EP_TX_NAK);
  SetEPRxAddr(ENDP0, ENDP0_RXADDR);
  SetEPRxCount(ENDP0, Device_Property.MaxPacketSize);
  SetEPTxAddr(ENDP0, ENDP0_TXADDR);
  Clear_Status_Out(ENDP0);
  SetEPRxValid(ENDP0);

  /* Initialize Endpoint 1 */
  SetEPType(ENDP1, EP_BULK);
  SetEPTxAddr(ENDP1, ENDP1_TXADDR);
  SetEPTxStatus(ENDP1, EP_TX_NAK);
  SetEPRxStatus(ENDP1, EP_RX_DIS);

  /* Initialize Endpoint 2 */
  SetEPType(ENDP2, EP_BULK);
  SetEPRxAddr(ENDP2, ENDP2_RXADDR);
  SetEPRxCount(ENDP2, Device_Property.MaxPacketSize);
  SetEPRxStatus(ENDP2, EP_RX_VALID);
  SetEPTxStatus(ENDP2, EP_TX_DIS);


  SetEPRxCount(ENDP0, Device_Property.MaxPacketSize);
  SetEPRxValid(ENDP0);

  /* Set the device to response on default address */
  SetDeviceAddress(0);

  bDeviceState = ATTACHED;

  CBW.dSignature = BOT_CBW_SIGNATURE;
  Bot_State = BOT_IDLE;
  USB_NotConfigured_LED();
}