示例#1
0
BOOST_FIXTURE_TEST_CASE(importmulti_rescan, TestChain100Setup)
{
    auto chain = interfaces::MakeChain();

    // Cap last block file size, and mine new block in a new block file.
    CBlockIndex* oldTip = chainActive.Tip();
    GetBlockFileInfo(oldTip->GetBlockPos().nFile)->nSize = MAX_BLOCKFILE_SIZE;
    CreateAndProcessBlock({}, GetScriptForRawPubKey(coinbaseKey.GetPubKey()));
    CBlockIndex* newTip = chainActive.Tip();

    auto locked_chain = chain->lock();

    // Prune the older block file.
    PruneOneBlockFile(oldTip->GetBlockPos().nFile);
    UnlinkPrunedFiles({oldTip->GetBlockPos().nFile});

    // Verify importmulti RPC returns failure for a key whose creation time is
    // before the missing block, and success for a key whose creation time is
    // after.
    {
        std::shared_ptr<CWallet> wallet = std::make_shared<CWallet>(*chain, WalletLocation(), WalletDatabase::CreateDummy());
        AddWallet(wallet);
        UniValue keys;
        keys.setArray();
        UniValue key;
        key.setObject();
        key.pushKV("scriptPubKey", HexStr(GetScriptForRawPubKey(coinbaseKey.GetPubKey())));
        key.pushKV("timestamp", 0);
        key.pushKV("internal", UniValue(true));
        keys.push_back(key);
        key.clear();
        key.setObject();
        CKey futureKey;
        futureKey.MakeNewKey(true);
        key.pushKV("scriptPubKey", HexStr(GetScriptForRawPubKey(futureKey.GetPubKey())));
        key.pushKV("timestamp", newTip->GetBlockTimeMax() + TIMESTAMP_WINDOW + 1);
        key.pushKV("internal", UniValue(true));
        keys.push_back(key);
        JSONRPCRequest request;
        request.params.setArray();
        request.params.push_back(keys);

        UniValue response = importmulti(request);
        BOOST_CHECK_EQUAL(response.write(),
            strprintf("[{\"success\":false,\"error\":{\"code\":-1,\"message\":\"Rescan failed for key with creation "
                      "timestamp %d. There was an error reading a block from time %d, which is after or within %d "
                      "seconds of key creation, and could contain transactions pertaining to the key. As a result, "
                      "transactions and coins using this key may not appear in the wallet. This error could be caused "
                      "by pruning or data corruption (see bitcoind log for details) and could be dealt with by "
                      "downloading and rescanning the relevant blocks (see -reindex and -rescan "
                      "options).\"}},{\"success\":true}]",
                              0, oldTip->GetBlockTimeMax(), TIMESTAMP_WINDOW));
        RemoveWallet(wallet);
    }
}
示例#2
0
void JSONRPCRequest::parse(const UniValue& valRequest)
{
    // Parse request
    if (!valRequest.isObject())
        throw JSONRPCError(RPC_INVALID_REQUEST, "Invalid Request object");
    const UniValue& request = valRequest.get_obj();

    // Parse id now so errors from here on will have the id
    id = find_value(request, "id");

    // Parse method
    UniValue valMethod = find_value(request, "method");
    if (valMethod.isNull())
        throw JSONRPCError(RPC_INVALID_REQUEST, "Missing method");
    if (!valMethod.isStr())
        throw JSONRPCError(RPC_INVALID_REQUEST, "Method must be a string");
    strMethod = valMethod.get_str();
    if (fLogIPs)
        LogPrint(BCLog::RPC, "ThreadRPCServer method=%s user=%s peeraddr=%s\n", SanitizeString(strMethod),
            this->authUser, this->peerAddr);
    else
        LogPrint(BCLog::RPC, "ThreadRPCServer method=%s user=%s\n", SanitizeString(strMethod), this->authUser);

    // Parse params
    UniValue valParams = find_value(request, "params");
    if (valParams.isArray() || valParams.isObject())
        params = valParams;
    else if (valParams.isNull())
        params = UniValue(UniValue::VARR);
    else
        throw JSONRPCError(RPC_INVALID_REQUEST, "Params must be an array or object");
}
示例#3
0
文件: rest.cpp 项目: Airche/wificoin
static bool rest_chaininfo(HTTPRequest* req, const std::string& strURIPart)
{
    if (!CheckWarmup(req))
        return false;
    std::string param;
    const RetFormat rf = ParseDataFormat(param, strURIPart);

    switch (rf) {
    case RF_JSON: {
        JSONRPCRequest jsonRequest;
        jsonRequest.params = UniValue(UniValue::VARR);
        UniValue chainInfoObject = getblockchaininfo(jsonRequest);
        std::string strJSON = chainInfoObject.write() + "\n";
        req->WriteHeader("Content-Type", "application/json");
        req->WriteReply(HTTP_OK, strJSON);
        return true;
    }
    default: {
        return RESTERR(req, HTTP_NOT_FOUND, "output format not found (available: json)");
    }
    }

    // not reached
    return true; // continue to process further HTTP reqs on this cxn
}
示例#4
0
/**
 * Process named arguments into a vector of positional arguments, based on the
 * passed-in specification for the RPC call's arguments.
 */
static inline JSONRPCRequest transformNamedArguments(const JSONRPCRequest& in, const std::vector<std::string>& argNames)
{
    JSONRPCRequest out = in;
    out.params = UniValue(UniValue::VARR);
    // Build a map of parameters, and remove ones that have been processed, so that we can throw a focused error if
    // there is an unknown one.
    const std::vector<std::string>& keys = in.params.getKeys();
    const std::vector<UniValue>& values = in.params.getValues();
    std::unordered_map<std::string, const UniValue*> argsIn;
    for (size_t i=0; i<keys.size(); ++i) {
        argsIn[keys[i]] = &values[i];
    }
    // Process expected parameters.
    int hole = 0;
    for (const std::string &argNamePattern: argNames) {
        std::vector<std::string> vargNames;
        boost::algorithm::split(vargNames, argNamePattern, boost::algorithm::is_any_of("|"));
        auto fr = argsIn.end();
        for (const std::string & argName : vargNames) {
            fr = argsIn.find(argName);
            if (fr != argsIn.end()) {
                break;
            }
        }
        if (fr != argsIn.end()) {
            for (int i = 0; i < hole; ++i) {
                // Fill hole between specified parameters with JSON nulls,
                // but not at the end (for backwards compatibility with calls
                // that act based on number of specified parameters).
                out.params.push_back(UniValue());
            }
            hole = 0;
            out.params.push_back(*fr->second);
            argsIn.erase(fr);
        } else {
            hole += 1;
        }
    }
    // If there are still arguments in the argsIn map, this is an error.
    if (!argsIn.empty()) {
        throw JSONRPCError(RPC_INVALID_PARAMETER, "Unknown named parameter " + argsIn.begin()->first);
    }
    // Return request with named arguments transformed to positional arguments
    return out;
}
示例#5
0
UniValue ValueFromAmount(const CAmount& amount)
{
    bool sign = amount < 0;
    int64_t n_abs = (sign ? -amount : amount);
    int64_t quotient = n_abs / COIN;
    int64_t remainder = n_abs % COIN;
    return UniValue(UniValue::VNUM,
            strprintf("%s%d.%08d", sign ? "-" : "", quotient, remainder));
}
示例#6
0
QString QNameCoin::randPayCreateTx(const RandPayRequest & r, QString & error) {
	try {
		JSONRPCRequest request;
		request.params.setArray();
		request.params.push_back(UniValue(r._amount));
		request.params.push_back(UniValue(r._chap.toStdString()));
		request.params.push_back(UniValue((double)r._risk));
		request.params.push_back(UniValue((double)r._timeout));
		//request.params.push_back();[naive]
		UniValue res = randpay_createtx(request);
		return QString::fromStdString(res.write());
	} catch (UniValue& objError) {
		error = errorToString(objError);
	} catch (const std::exception& e) {
		error = toString(e);
	}
	return {};
}
示例#7
0
UniValue ValueFromAmount(const Amount &amount) {
    int64_t amt = amount.GetSatoshis();
    bool sign = amt < 0;
    int64_t n_abs = (sign ? -amt : amt);
    int64_t quotient = n_abs / COIN.GetSatoshis();
    int64_t remainder = n_abs % COIN.GetSatoshis();
    return UniValue(UniValue::VNUM, strprintf("%s%d.%08d", sign ? "-" : "",
                                              quotient, remainder));
}
示例#8
0
    UniValue read_json(const std::string& jsondata)
    {
        UniValue v;

        if (!v.read(jsondata) || !v.isArray())
        {
            return UniValue(UniValue::VARR);
        }
        return v.get_array();
    }
示例#9
0
std::string CRPCTable::help(const std::string& strCommand, const JSONRPCRequest& helpreq) const
{
    std::string strRet;
    std::string category;
    std::set<rpcfn_type> setDone;
    std::vector<std::pair<std::string, const CRPCCommand*> > vCommands;

    for (const auto& entry : mapCommands)
        vCommands.push_back(make_pair(entry.second->category + entry.first, entry.second));
    sort(vCommands.begin(), vCommands.end());

    JSONRPCRequest jreq(helpreq);
    jreq.fHelp = true;
    jreq.params = UniValue();

    for (const std::pair<std::string, const CRPCCommand*>& command : vCommands)
    {
        const CRPCCommand *pcmd = command.second;
        std::string strMethod = pcmd->name;
        if ((strCommand != "" || pcmd->category == "hidden") && strMethod != strCommand)
            continue;
        jreq.strMethod = strMethod;
        try
        {
            rpcfn_type pfn = pcmd->actor;
            if (setDone.insert(pfn).second)
                (*pfn)(jreq);
        }
        catch (const std::exception& e)
        {
            // Help text is returned in an exception
            std::string strHelp = std::string(e.what());
            if (strCommand == "")
            {
                if (strHelp.find('\n') != std::string::npos)
                    strHelp = strHelp.substr(0, strHelp.find('\n'));

                if (category != pcmd->category)
                {
                    if (!category.empty())
                        strRet += "\n";
                    category = pcmd->category;
                    std::string firstLetter = category.substr(0,1);
                    boost::to_upper(firstLetter);
                    strRet += "== " + firstLetter + category.substr(1) + " ==\n";
                }
            }
            strRet += strHelp + "\n";
        }
    }
    if (strRet == "")
        strRet = strprintf("help: unknown command: %s\n", strCommand);
    strRet = strRet.substr(0,strRet.size()-1);
    return strRet;
}
std::string CreateEncodedProposalObject(const UniValue& objJSON)
{
    UniValue innerArray(UniValue::VARR);
    innerArray.push_back(UniValue("proposal"));
    innerArray.push_back(objJSON);

    UniValue outerArray(UniValue::VARR);
    outerArray.push_back(innerArray);
    
    std::string strData = outerArray.write();
    std::string strHex = HexStr(strData);
    return strHex;
}
示例#11
0
 /** Collect values from the batch and form a simulated `getinfo` reply. */
 UniValue ProcessReply(const UniValue &batch_in) override
 {
     UniValue result(UniValue::VOBJ);
     std::vector<UniValue> batch = JSONRPCProcessBatchReply(batch_in, 3);
     // Errors in getnetworkinfo() and getblockchaininfo() are fatal, pass them on
     // getwalletinfo() is allowed to fail in case there is no wallet.
     if (!batch[ID_NETWORKINFO]["error"].isNull()) {
         return batch[ID_NETWORKINFO];
     }
     if (!batch[ID_BLOCKCHAININFO]["error"].isNull()) {
         return batch[ID_BLOCKCHAININFO];
     }
     result.pushKV("version", batch[ID_NETWORKINFO]["result"]["version"]);
     result.pushKV("protocolversion", batch[ID_NETWORKINFO]["result"]["protocolversion"]);
     if (!batch[ID_WALLETINFO].isNull()) {
         result.pushKV("walletversion", batch[ID_WALLETINFO]["result"]["walletversion"]);
         result.pushKV("balance", batch[ID_WALLETINFO]["result"]["balance"]);
     }
     result.pushKV("blocks", batch[ID_BLOCKCHAININFO]["result"]["blocks"]);
     result.pushKV("timeoffset", batch[ID_NETWORKINFO]["result"]["timeoffset"]);
     result.pushKV("connections", batch[ID_NETWORKINFO]["result"]["connections"]);
     result.pushKV("proxy", batch[ID_NETWORKINFO]["result"]["networks"][0]["proxy"]);
     result.pushKV("difficulty", batch[ID_BLOCKCHAININFO]["result"]["difficulty"]);
     result.pushKV("testnet", UniValue(batch[ID_BLOCKCHAININFO]["result"]["chain"].get_str() == "test"));
     if (!batch[ID_WALLETINFO].isNull()) {
         result.pushKV("walletversion", batch[ID_WALLETINFO]["result"]["walletversion"]);
         result.pushKV("balance", batch[ID_WALLETINFO]["result"]["balance"]);
         result.pushKV("keypoololdest", batch[ID_WALLETINFO]["result"]["keypoololdest"]);
         result.pushKV("keypoolsize", batch[ID_WALLETINFO]["result"]["keypoolsize"]);
         if (!batch[ID_WALLETINFO]["result"]["unlocked_until"].isNull()) {
             result.pushKV("unlocked_until", batch[ID_WALLETINFO]["result"]["unlocked_until"]);
         }
         result.pushKV("paytxfee", batch[ID_WALLETINFO]["result"]["paytxfee"]);
     }
     result.pushKV("relayfee", batch[ID_NETWORKINFO]["result"]["relayfee"]);
     result.pushKV("warnings", batch[ID_NETWORKINFO]["result"]["warnings"]);
     return JSONRPCReplyObj(result, NullUniValue, 1);
 }
示例#12
0
 UniValue operator()(const CNoDestination &dest) const { return UniValue(UniValue::VOBJ); }
示例#13
0
BOOST_FIXTURE_TEST_CASE(rescan, TestChain100Setup)
{
    LOCK(cs_main);

    // Cap last block file size, and mine new block in a new block file.
    CBlockIndex* const nullBlock = nullptr;
    CBlockIndex* oldTip = chainActive.Tip();
    GetBlockFileInfo(oldTip->GetBlockPos().nFile)->nSize = MAX_BLOCKFILE_SIZE;
    CreateAndProcessBlock({}, GetScriptForRawPubKey(coinbaseKey.GetPubKey()));
    CBlockIndex* newTip = chainActive.Tip();

    // Verify ScanForWalletTransactions picks up transactions in both the old
    // and new block files.
    {
        CWallet wallet;
        LOCK(wallet.cs_wallet);
        wallet.AddKeyPubKey(coinbaseKey, coinbaseKey.GetPubKey());
        BOOST_CHECK_EQUAL(nullBlock, wallet.ScanForWalletTransactions(oldTip));
        BOOST_CHECK_EQUAL(wallet.GetImmatureBalance(), 100 * COIN);
    }

    // Prune the older block file.
    PruneOneBlockFile(oldTip->GetBlockPos().nFile);
    UnlinkPrunedFiles({oldTip->GetBlockPos().nFile});

    // Verify ScanForWalletTransactions only picks transactions in the new block
    // file.
    {
        CWallet wallet;
        LOCK(wallet.cs_wallet);
        wallet.AddKeyPubKey(coinbaseKey, coinbaseKey.GetPubKey());
        BOOST_CHECK_EQUAL(oldTip, wallet.ScanForWalletTransactions(oldTip));
        BOOST_CHECK_EQUAL(wallet.GetImmatureBalance(), 50 * COIN);
    }

    // Verify importmulti RPC returns failure for a key whose creation time is
    // before the missing block, and success for a key whose creation time is
    // after.
    {
        CWallet wallet;
        vpwallets.insert(vpwallets.begin(), &wallet);
        UniValue keys;
        keys.setArray();
        UniValue key;
        key.setObject();
        key.pushKV("scriptPubKey", HexStr(GetScriptForRawPubKey(coinbaseKey.GetPubKey())));
        key.pushKV("timestamp", 0);
        key.pushKV("internal", UniValue(true));
        keys.push_back(key);
        key.clear();
        key.setObject();
        CKey futureKey;
        futureKey.MakeNewKey(true);
        key.pushKV("scriptPubKey", HexStr(GetScriptForRawPubKey(futureKey.GetPubKey())));
        key.pushKV("timestamp", newTip->GetBlockTimeMax() + TIMESTAMP_WINDOW + 1);
        key.pushKV("internal", UniValue(true));
        keys.push_back(key);
        JSONRPCRequest request;
        request.params.setArray();
        request.params.push_back(keys);

        UniValue response = importmulti(request);
        BOOST_CHECK_EQUAL(response.write(),
            strprintf("[{\"success\":false,\"error\":{\"code\":-1,\"message\":\"Rescan failed for key with creation "
                      "timestamp %d. There was an error reading a block from time %d, which is after or within %d "
                      "seconds of key creation, and could contain transactions pertaining to the key. As a result, "
                      "transactions and coins using this key may not appear in the wallet. This error could be caused "
                      "by pruning or data corruption (see bitcoind log for details) and could be dealt with by "
                      "downloading and rescanning the relevant blocks (see -reindex and -rescan "
                      "options).\"}},{\"success\":true}]",
                              0, oldTip->GetBlockTimeMax(), TIMESTAMP_WINDOW));
        vpwallets.erase(vpwallets.begin());
    }
}
示例#14
0
/**
 * Note: This interface may still be subject to change.
 */
std::string CRPCTable::help(Config &config, const std::string &strCommand,
                            const JSONRPCRequest &helpreq) const {
    std::string strRet;
    std::string category;
    std::set<rpcfn_type> setDone;
    std::vector<std::pair<std::string, const CRPCCommand *>> vCommands;

    for (std::map<std::string, const CRPCCommand *>::const_iterator mi =
             mapCommands.begin();
         mi != mapCommands.end(); ++mi)
        vCommands.push_back(
            std::make_pair(mi->second->category + mi->first, mi->second));
    sort(vCommands.begin(), vCommands.end());

    JSONRPCRequest jreq(helpreq);
    jreq.fHelp = true;
    jreq.params = UniValue();

    for (const std::pair<std::string, const CRPCCommand *> &command :
         vCommands) {
        const CRPCCommand *pcmd = command.second;
        std::string strMethod = pcmd->name;
        // We already filter duplicates, but these deprecated screw up the sort
        // order
        if (strMethod.find("label") != std::string::npos) {
            continue;
        }
        if ((strCommand != "" || pcmd->category == "hidden") &&
            strMethod != strCommand) {
            continue;
        }

        jreq.strMethod = strMethod;
        try {
            JSONRPCRequest jreq;
            jreq.fHelp = true;
            rpcfn_type pfn = pcmd->actor;
            if (setDone.insert(pfn).second) pfn(config, jreq);
        } catch (const std::exception &e) {
            // Help text is returned in an exception
            std::string strHelp = std::string(e.what());
            if (strCommand == "") {
                if (strHelp.find('\n') != std::string::npos)
                    strHelp = strHelp.substr(0, strHelp.find('\n'));

                if (category != pcmd->category) {
                    if (!category.empty()) strRet += "\n";
                    category = pcmd->category;
                    std::string firstLetter = category.substr(0, 1);
                    boost::to_upper(firstLetter);
                    strRet +=
                        "== " + firstLetter + category.substr(1) + " ==\n";
                }
            }
            strRet += strHelp + "\n";
        }
    }
    if (strRet == "")
        strRet = strprintf("help: unknown command: %s\n", strCommand);
    strRet = strRet.substr(0, strRet.size() - 1);
    return strRet;
}
示例#15
0
BOOST_FIXTURE_TEST_CASE(rescan, TestChain100Setup)
{
    LOCK(cs_main);

    // Cap last block file size, and mine new block in a new block file.
    CBlockIndex* oldTip = chainActive.Tip();
    GetBlockFileInfo(oldTip->GetBlockPos().nFile)->nSize = MAX_BLOCKFILE_SIZE;
    CreateAndProcessBlock({}, GetScriptForRawPubKey(coinbaseKey.GetPubKey()));
    CBlockIndex* newTip = chainActive.Tip();

    // Verify ScanForWalletTransactions picks up transactions in both the old
    // and new block files.
    {
        CWallet wallet;
        LOCK(wallet.cs_wallet);
        wallet.AddKeyPubKey(coinbaseKey, coinbaseKey.GetPubKey());
        BOOST_CHECK_EQUAL(oldTip, wallet.ScanForWalletTransactions(oldTip));
        BOOST_CHECK_EQUAL(wallet.GetImmatureBalance(), 100 * COIN);
    }

    // Prune the older block file.
    PruneOneBlockFile(oldTip->GetBlockPos().nFile);
    UnlinkPrunedFiles({oldTip->GetBlockPos().nFile});

    // Verify ScanForWalletTransactions only picks transactions in the new block
    // file.
    {
        CWallet wallet;
        LOCK(wallet.cs_wallet);
        wallet.AddKeyPubKey(coinbaseKey, coinbaseKey.GetPubKey());
        BOOST_CHECK_EQUAL(newTip, wallet.ScanForWalletTransactions(oldTip));
        BOOST_CHECK_EQUAL(wallet.GetImmatureBalance(), 50 * COIN);
    }

    // Verify importmulti RPC returns failure for a key whose creation time is
    // before the missing block, and success for a key whose creation time is
    // after.
    {
        CWallet wallet;
        CWallet *backup = ::pwalletMain;
        ::pwalletMain = &wallet;
        UniValue keys;
        keys.setArray();
        UniValue key;
        key.setObject();
        key.pushKV("scriptPubKey", HexStr(GetScriptForRawPubKey(coinbaseKey.GetPubKey())));
        key.pushKV("timestamp", 0);
        key.pushKV("internal", UniValue(true));
        keys.push_back(key);
        key.clear();
        key.setObject();
        CKey futureKey;
        futureKey.MakeNewKey(true);
        key.pushKV("scriptPubKey", HexStr(GetScriptForRawPubKey(futureKey.GetPubKey())));
        key.pushKV("timestamp", newTip->GetBlockTimeMax() + TIMESTAMP_WINDOW);
        key.pushKV("internal", UniValue(true));
        keys.push_back(key);
        JSONRPCRequest request;
        request.params.setArray();
        request.params.push_back(keys);

        UniValue response = importmulti(request);
        BOOST_CHECK_EQUAL(response.write(), strprintf("[{\"success\":false,\"error\":{\"code\":-1,\"message\":\"Failed to rescan before time %d, transactions may be missing.\"}},{\"success\":true}]", newTip->GetBlockTimeMax()));
        ::pwalletMain = backup;
    }

    // Verify ScanForWalletTransactions does not return null when the scan is
    // elided due to the nTimeFirstKey optimization.
    {
        CWallet wallet;
        {
            LOCK(wallet.cs_wallet);
            wallet.UpdateTimeFirstKey(newTip->GetBlockTime() + 7200 + 1);
        }
        BOOST_CHECK_EQUAL(newTip, wallet.ScanForWalletTransactions(newTip));
    }
}