/**
Variable Driver main entry point. The Variable driver places the 4 EFI
runtime services in the EFI System Table and installs arch protocols
for variable read and write services being available. It also registers
a notification function for an EVT_SIGNAL_VIRTUAL_ADDRESS_CHANGE event.
@param[in] ImageHandle The firmware allocated handle for the EFI image.
@param[in] SystemTable A pointer to the EFI System Table.
@retval EFI_SUCCESS Variable service successfully initialized.
**/
EFI_STATUS
EFIAPI
VariableServiceInitialize (
IN EFI_HANDLE ImageHandle,
IN EFI_SYSTEM_TABLE *SystemTable
)
{
EFI_STATUS Status;
EFI_HANDLE VariableHandle;
VOID *SmmFtwRegistration;
VOID *SmmEndOfDxeRegistration;
//
// Variable initialize.
//
Status = VariableCommonInitialize ();
ASSERT_EFI_ERROR (Status);
//
// Install the Smm Variable Protocol on a new handle.
//
VariableHandle = NULL;
Status = gSmst->SmmInstallProtocolInterface (
&VariableHandle,
&gEfiSmmVariableProtocolGuid,
EFI_NATIVE_INTERFACE,
&gSmmVariable
);
ASSERT_EFI_ERROR (Status);
Status = gSmst->SmmInstallProtocolInterface (
&VariableHandle,
&gEdkiiSmmVarCheckProtocolGuid,
EFI_NATIVE_INTERFACE,
&mSmmVarCheck
);
ASSERT_EFI_ERROR (Status);
mVariableBufferPayloadSize = GetNonVolatileMaxVariableSize () +
OFFSET_OF (SMM_VARIABLE_COMMUNICATE_VAR_CHECK_VARIABLE_PROPERTY, Name) - GetVariableHeaderSize ();
Status = gSmst->SmmAllocatePool (
EfiRuntimeServicesData,
mVariableBufferPayloadSize,
(VOID **)&mVariableBufferPayload
);
ASSERT_EFI_ERROR (Status);
///
/// Register SMM variable SMI handler
///
VariableHandle = NULL;
Status = gSmst->SmiHandlerRegister (SmmVariableHandler, &gEfiSmmVariableProtocolGuid, &VariableHandle);
ASSERT_EFI_ERROR (Status);
//
// Notify the variable wrapper driver the variable service is ready
//
Status = SystemTable->BootServices->InstallProtocolInterface (
&mVariableHandle,
&gEfiSmmVariableProtocolGuid,
EFI_NATIVE_INTERFACE,
&gSmmVariable
);
ASSERT_EFI_ERROR (Status);
//
// Register EFI_SMM_END_OF_DXE_PROTOCOL_GUID notify function.
//
Status = gSmst->SmmRegisterProtocolNotify (
&gEfiSmmEndOfDxeProtocolGuid,
SmmEndOfDxeCallback,
&SmmEndOfDxeRegistration
);
ASSERT_EFI_ERROR (Status);
//
// Register FtwNotificationEvent () notify function.
//
Status = gSmst->SmmRegisterProtocolNotify (
&gEfiSmmFaultTolerantWriteProtocolGuid,
SmmFtwNotificationEvent,
&SmmFtwRegistration
);
ASSERT_EFI_ERROR (Status);
SmmFtwNotificationEvent (NULL, NULL, NULL);
return EFI_SUCCESS;
}
/**
Variable Driver main entry point. The Variable driver places the 4 EFI
runtime services in the EFI System Table and installs arch protocols
for variable read and write services being available. It also registers
a notification function for an EVT_SIGNAL_VIRTUAL_ADDRESS_CHANGE event.
@param[in] ImageHandle The firmware allocated handle for the EFI image.
@param[in] SystemTable A pointer to the EFI System Table.
@retval EFI_SUCCESS Variable service successfully initialized.
**/
EFI_STATUS
EFIAPI
VariableServiceInitialize (
IN EFI_HANDLE ImageHandle,
IN EFI_SYSTEM_TABLE *SystemTable
)
{
EFI_STATUS Status;
EFI_EVENT ReadyToBootEvent;
EFI_EVENT EndOfDxeEvent;
Status = VariableCommonInitialize ();
ASSERT_EFI_ERROR (Status);
Status = gBS->InstallMultipleProtocolInterfaces (
&mHandle,
&gEdkiiVariableLockProtocolGuid,
&mVariableLock,
NULL
);
ASSERT_EFI_ERROR (Status);
Status = gBS->InstallMultipleProtocolInterfaces (
&mHandle,
&gEdkiiVarCheckProtocolGuid,
&mVarCheck,
NULL
);
ASSERT_EFI_ERROR (Status);
SystemTable->RuntimeServices->GetVariable = VariableServiceGetVariable;
SystemTable->RuntimeServices->GetNextVariableName = VariableServiceGetNextVariableName;
SystemTable->RuntimeServices->SetVariable = VariableServiceSetVariable;
SystemTable->RuntimeServices->QueryVariableInfo = VariableServiceQueryVariableInfo;
//
// Now install the Variable Runtime Architectural protocol on a new handle.
//
Status = gBS->InstallProtocolInterface (
&mHandle,
&gEfiVariableArchProtocolGuid,
EFI_NATIVE_INTERFACE,
NULL
);
ASSERT_EFI_ERROR (Status);
//
// Register FtwNotificationEvent () notify function.
//
EfiCreateProtocolNotifyEvent (
&gEfiFaultTolerantWriteProtocolGuid,
TPL_CALLBACK,
FtwNotificationEvent,
(VOID *)SystemTable,
&mFtwRegistration
);
Status = gBS->CreateEventEx (
EVT_NOTIFY_SIGNAL,
TPL_NOTIFY,
VariableClassAddressChangeEvent,
NULL,
&gEfiEventVirtualAddressChangeGuid,
&mVirtualAddressChangeEvent
);
ASSERT_EFI_ERROR (Status);
//
// Register the event handling function to reclaim variable for OS usage.
//
Status = EfiCreateEventReadyToBootEx (
TPL_NOTIFY,
OnReadyToBoot,
NULL,
&ReadyToBootEvent
);
ASSERT_EFI_ERROR (Status);
//
// Register the event handling function to set the End Of DXE flag.
//
Status = gBS->CreateEventEx (
EVT_NOTIFY_SIGNAL,
TPL_NOTIFY,
OnEndOfDxe,
NULL,
&gEfiEndOfDxeEventGroupGuid,
&EndOfDxeEvent
);
ASSERT_EFI_ERROR (Status);
return EFI_SUCCESS;
}
/**
Variable Driver main entry point. The Variable driver places the 4 EFI
runtime services in the EFI System Table and installs arch protocols
for variable read and write services being available. It also registers
a notification function for an EVT_SIGNAL_VIRTUAL_ADDRESS_CHANGE event.
@param[in] ImageHandle The firmware allocated handle for the EFI image.
@param[in] SystemTable A pointer to the EFI System Table.
@retval EFI_SUCCESS Variable service successfully initialized.
**/
EFI_STATUS
EFIAPI
VariableServiceInitialize (
IN EFI_HANDLE ImageHandle,
IN EFI_SYSTEM_TABLE *SystemTable
)
{
EFI_STATUS Status;
EFI_HANDLE VariableHandle;
VOID *SmmFtwRegistration;
EFI_SMM_ACCESS2_PROTOCOL *SmmAccess;
UINTN Size;
//
// Variable initialize.
//
Status = VariableCommonInitialize ();
ASSERT_EFI_ERROR (Status);
//
// Install the Smm Variable Protocol on a new handle.
//
VariableHandle = NULL;
Status = gSmst->SmmInstallProtocolInterface (
&VariableHandle,
&gEfiSmmVariableProtocolGuid,
EFI_NATIVE_INTERFACE,
&gSmmVariable
);
ASSERT_EFI_ERROR (Status);
//
// Get SMRAM information
//
Status = gBS->LocateProtocol (&gEfiSmmAccess2ProtocolGuid, NULL, (VOID **)&SmmAccess);
ASSERT_EFI_ERROR (Status);
Size = 0;
Status = SmmAccess->GetCapabilities (SmmAccess, &Size, NULL);
ASSERT (Status == EFI_BUFFER_TOO_SMALL);
Status = gSmst->SmmAllocatePool (
EfiRuntimeServicesData,
Size,
(VOID **)&mSmramRanges
);
ASSERT_EFI_ERROR (Status);
Status = SmmAccess->GetCapabilities (SmmAccess, &Size, mSmramRanges);
ASSERT_EFI_ERROR (Status);
mSmramRangeCount = Size / sizeof (EFI_SMRAM_DESCRIPTOR);
///
/// Register SMM variable SMI handler
///
VariableHandle = NULL;
Status = gSmst->SmiHandlerRegister (SmmVariableHandler, &gEfiSmmVariableProtocolGuid, &VariableHandle);
ASSERT_EFI_ERROR (Status);
//
// Notify the variable wrapper driver the variable service is ready
//
Status = SystemTable->BootServices->InstallProtocolInterface (
&mVariableHandle,
&gEfiSmmVariableProtocolGuid,
EFI_NATIVE_INTERFACE,
&gSmmVariable
);
ASSERT_EFI_ERROR (Status);
//
// Register FtwNotificationEvent () notify function.
//
Status = gSmst->SmmRegisterProtocolNotify (
&gEfiSmmFaultTolerantWriteProtocolGuid,
SmmFtwNotificationEvent,
&SmmFtwRegistration
);
ASSERT_EFI_ERROR (Status);
SmmFtwNotificationEvent (NULL, NULL, NULL);
return EFI_SUCCESS;
}
