C++ (Cpp) WIZ_PIN_DATA示例

示例#1

文件： gpio_api.c 项目： jsunderland/mbed

void gpio_dir(gpio_t *obj, PinDirection direction)
{
    MBED_ASSERT(obj->pin != (PinName)NC);
    obj->direction = direction;

    pin_function(obj->pin, WIZ_PIN_DATA(obj->direction, obj->mode, 1));
}

示例#2

文件： gpio_irq_api.c 项目： Sweet-Peas/mbed

void gpio_irq_free(gpio_irq_t *obj)
{
    // Disable EXTI line
    NVIC_ClearPendingIRQ(obj->irq_n);
    EXTI_DeInit();
    pin_function(obj->pin, WIZ_PIN_DATA(WIZ_MODE_INPUT, WIZ_GPIO_NOPULL, 0));
    obj->event = EDGE_NONE;
}

示例#3

文件： PeripheralPins.c 项目： Sweet-Peas/mbed

 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
#include "PeripheralPins.h"
#include "PeripheralNames.h"
#include "pinmap.h"


//*** ADC ***
const PinMap PinMap_ADC[] = {
    {PC_15, ADC_0, WIZ_PIN_DATA(WIZ_MODE_AF, WIZ_GPIO_PULLUP, Px_AFSR_AF3)}, // ADC0_IN0
    {PC_14, ADC_0, WIZ_PIN_DATA(WIZ_MODE_AF, WIZ_GPIO_PULLUP, Px_AFSR_AF3)}, // ADC0_IN1
    {PC_13, ADC_0, WIZ_PIN_DATA(WIZ_MODE_AF, WIZ_GPIO_PULLUP, Px_AFSR_AF3)}, // ADC0_IN2
    {PC_12, ADC_0, WIZ_PIN_DATA(WIZ_MODE_AF, WIZ_GPIO_PULLUP, Px_AFSR_AF3)}, // ADC0_IN3
    {PC_11, ADC_0, WIZ_PIN_DATA(WIZ_MODE_AF, WIZ_GPIO_PULLUP, Px_AFSR_AF3)}, // ADC0_IN4
    {PC_10, ADC_0, WIZ_PIN_DATA(WIZ_MODE_AF, WIZ_GPIO_PULLUP, Px_AFSR_AF3)}, // ADC0_IN5
    {NC,   NC,    0}
};


//*** SERIAL ***
const PinMap PinMap_UART_TX[] = {
    {PA_14, UART_0, WIZ_PIN_DATA(WIZ_MODE_AF, WIZ_GPIO_PULLUP, Px_AFSR_AF0)},
    {PC_2,  UART_1, WIZ_PIN_DATA(WIZ_MODE_AF, WIZ_GPIO_PULLUP, Px_AFSR_AF0)},
    {NC,    NC,     0}
};

示例#4

文件： pwmout_api.c 项目： Babody/mbed

void pwmout_free(pwmout_t* obj)
{
    // Configure GPIO
    pin_function(obj->pin, WIZ_PIN_DATA(WIZ_MODE_AF, WIZ_GPIO_NOPULL, Px_AFSR_AF0));
}

示例#5

文件： PeripheralPins.c 项目： Babody/mbed

 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
 * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *******************************************************************************
 */
 
#include "PeripheralPins.h"
#include "PeripheralNames.h"
#include "pinmap.h"


//*** ADC ***
const PinMap PinMap_ADC[] = {
    {PC_15, ADC_0, WIZ_PIN_DATA(WIZ_MODE_AF, WIZ_GPIO_PULLUP, Px_AFSR_AF3)}, // ADC0_IN0
    {PC_14, ADC_0, WIZ_PIN_DATA(WIZ_MODE_AF, WIZ_GPIO_PULLUP, Px_AFSR_AF3)}, // ADC0_IN1
    {PC_13, ADC_0, WIZ_PIN_DATA(WIZ_MODE_AF, WIZ_GPIO_PULLUP, Px_AFSR_AF3)}, // ADC0_IN2
    {PC_12, ADC_0, WIZ_PIN_DATA(WIZ_MODE_AF, WIZ_GPIO_PULLUP, Px_AFSR_AF3)}, // ADC0_IN3
    {PC_11, ADC_0, WIZ_PIN_DATA(WIZ_MODE_AF, WIZ_GPIO_PULLUP, Px_AFSR_AF3)}, // ADC0_IN4
    {PC_10, ADC_0, WIZ_PIN_DATA(WIZ_MODE_AF, WIZ_GPIO_PULLUP, Px_AFSR_AF3)}, // ADC0_IN5
    {PC_9 , ADC_0, WIZ_PIN_DATA(WIZ_MODE_AF, WIZ_GPIO_PULLUP, Px_AFSR_AF3)}, // ADC0_IN6
    {PC_8 , ADC_0, WIZ_PIN_DATA(WIZ_MODE_AF, WIZ_GPIO_PULLUP, Px_AFSR_AF3)}, // ADC0_IN7
    {NC,   NC,    0}
};


//*** SERIAL ***
const PinMap PinMap_UART_TX[] = {
    {PA_13, UART_0, WIZ_PIN_DATA(WIZ_MODE_AF, WIZ_GPIO_PULLUP, Px_AFSR_AF0)},
    {PC_2,  UART_1, WIZ_PIN_DATA(WIZ_MODE_AF, WIZ_GPIO_PULLUP, Px_AFSR_AF0)},