NTSTATUS
VIOSerialDeviceListCreatePdo(
IN WDFCHILDLIST DeviceList,
IN PWDF_CHILD_IDENTIFICATION_DESCRIPTION_HEADER IdentificationDescription,
IN PWDFDEVICE_INIT ChildInit
)
{
PVIOSERIAL_PORT pport = NULL;
NTSTATUS status = STATUS_SUCCESS;
WDFDEVICE hChild = NULL;
WDF_OBJECT_ATTRIBUTES attributes;
WDF_PNPPOWER_EVENT_CALLBACKS PnpPowerCallbacks;
WDF_DEVICE_PNP_CAPABILITIES pnpCaps;
WDF_DEVICE_STATE deviceState;
WDF_IO_QUEUE_CONFIG queueConfig;
PRAWPDO_VIOSERIAL_PORT rawPdo = NULL;
WDF_FILEOBJECT_CONFIG fileConfig;
DECLARE_CONST_UNICODE_STRING(deviceId, PORT_DEVICE_ID );
DECLARE_CONST_UNICODE_STRING(deviceLocation, L"RedHat VIOSerial Port" );
DECLARE_UNICODE_STRING_SIZE(buffer, DEVICE_DESC_LENGTH);
UNREFERENCED_PARAMETER(DeviceList);
PAGED_CODE();
TraceEvents(TRACE_LEVEL_INFORMATION, DBG_PNP, "--> %s\n", __FUNCTION__);
pport = CONTAINING_RECORD(IdentificationDescription,
VIOSERIAL_PORT,
Header
);
WdfDeviceInitSetDeviceType(ChildInit, FILE_DEVICE_SERIAL_PORT);
WdfDeviceInitSetIoType(ChildInit, WdfDeviceIoDirect);
do
{
WdfDeviceInitSetExclusive(ChildInit, TRUE);
status = WdfPdoInitAssignRawDevice(ChildInit, &GUID_DEVCLASS_PORT_DEVICE);
if (!NT_SUCCESS(status))
{
TraceEvents(TRACE_LEVEL_ERROR, DBG_PNP, "WdfPdoInitAssignRawDevice failed - 0x%x\n", status);
break;
}
status = WdfDeviceInitAssignSDDLString(ChildInit, &SDDL_DEVOBJ_SYS_ALL_ADM_ALL);
if (!NT_SUCCESS(status))
{
TraceEvents(TRACE_LEVEL_ERROR, DBG_PNP, "WdfDeviceInitAssignSDDLString failed - 0x%x\n", status);
break;
}
status = WdfPdoInitAssignDeviceID(ChildInit, &deviceId);
if (!NT_SUCCESS(status))
{
TraceEvents(TRACE_LEVEL_ERROR, DBG_PNP, "WdfPdoInitAssignDeviceID failed - 0x%x\n", status);
break;
}
status = WdfPdoInitAddHardwareID(ChildInit, &deviceId);
if (!NT_SUCCESS(status))
{
TraceEvents(TRACE_LEVEL_ERROR, DBG_PNP, "WdfPdoInitAddHardwareID failed - 0x%x\n", status);
break;
}
status = RtlUnicodeStringPrintf(
&buffer,
L"%02u",
pport->PortId
);
if (!NT_SUCCESS(status))
{
TraceEvents(TRACE_LEVEL_ERROR, DBG_PNP, "RtlUnicodeStringPrintf failed - 0x%x\n", status);
break;
}
status = WdfPdoInitAssignInstanceID(ChildInit, &buffer);
if (!NT_SUCCESS(status))
{
TraceEvents(TRACE_LEVEL_ERROR, DBG_PNP, "WdfPdoInitAssignInstanceID failed - 0x%x\n", status);
break;
}
status = RtlUnicodeStringPrintf(
&buffer,
L"vport%up%u",
pport->DeviceId,
pport->PortId
);
if (!NT_SUCCESS(status))
{
TraceEvents(TRACE_LEVEL_ERROR, DBG_PNP,
"RtlUnicodeStringPrintf failed 0x%x\n", status);
break;
}
status = WdfPdoInitAddDeviceText(
ChildInit,
&buffer,
&deviceLocation,
0x409
);
if (!NT_SUCCESS(status))
{
TraceEvents(TRACE_LEVEL_ERROR, DBG_PNP,
"WdfPdoInitAddDeviceText failed 0x%x\n", status);
break;
}
WdfPdoInitSetDefaultLocale(ChildInit, 0x409);
WDF_FILEOBJECT_CONFIG_INIT(
&fileConfig,
VIOSerialPortCreate,
VIOSerialPortClose,
WDF_NO_EVENT_CALLBACK
);
WdfDeviceInitSetFileObjectConfig(
ChildInit,
&fileConfig,
WDF_NO_OBJECT_ATTRIBUTES
);
WDF_PNPPOWER_EVENT_CALLBACKS_INIT(&PnpPowerCallbacks);
PnpPowerCallbacks.EvtDeviceD0Entry = VIOSerialPortEvtDeviceD0Entry;
PnpPowerCallbacks.EvtDeviceD0ExitPreInterruptsDisabled = VIOSerialPortEvtDeviceD0ExitPreInterruptsDisabled;
PnpPowerCallbacks.EvtDeviceD0Exit = VIOSerialPortEvtDeviceD0Exit;
WdfDeviceInitSetPnpPowerEventCallbacks(ChildInit, &PnpPowerCallbacks);
WDF_OBJECT_ATTRIBUTES_INIT_CONTEXT_TYPE(&attributes, RAWPDO_VIOSERIAL_PORT);
attributes.SynchronizationScope = WdfSynchronizationScopeDevice;
attributes.ExecutionLevel = WdfExecutionLevelPassive;
status = WdfDeviceCreate(
&ChildInit,
&attributes,
&hChild
);
if (!NT_SUCCESS(status))
{
TraceEvents(TRACE_LEVEL_ERROR, DBG_PNP,
"WdfDeviceCreate failed 0x%x\n", status);
break;
}
rawPdo = RawPdoSerialPortGetData(hChild);
rawPdo->port = pport;
pport->Device = hChild;
WDF_IO_QUEUE_CONFIG_INIT(&queueConfig,
WdfIoQueueDispatchSequential
);
queueConfig.EvtIoDeviceControl = VIOSerialPortDeviceControl;
status = WdfIoQueueCreate(hChild,
&queueConfig,
WDF_NO_OBJECT_ATTRIBUTES,
&pport->IoctlQueue
);
if (!NT_SUCCESS(status))
{
TraceEvents(TRACE_LEVEL_ERROR, DBG_PNP,
"WdfIoQueueCreate failed (IoCtrl Queue): 0x%x\n", status);
break;
}
status = WdfDeviceConfigureRequestDispatching(
hChild,
pport->IoctlQueue,
WdfRequestTypeDeviceControl
);
if(!NT_SUCCESS(status))
{
TraceEvents(TRACE_LEVEL_ERROR, DBG_PNP,
"DeviceConfigureRequestDispatching failed (IoCtrl Queue): 0x%x\n", status);
break;
}
WDF_IO_QUEUE_CONFIG_INIT(&queueConfig,
WdfIoQueueDispatchSequential);
queueConfig.EvtIoRead = VIOSerialPortRead;
queueConfig.EvtIoStop = VIOSerialPortIoStop;
status = WdfIoQueueCreate(hChild,
&queueConfig,
WDF_NO_OBJECT_ATTRIBUTES,
&pport->ReadQueue
);
if (!NT_SUCCESS(status))
{
TraceEvents(TRACE_LEVEL_ERROR, DBG_PNP,
"WdfIoQueueCreate (Read Queue) failed 0x%x\n", status);
break;
}
status = WdfDeviceConfigureRequestDispatching(
hChild,
pport->ReadQueue,
WdfRequestTypeRead
);
if(!NT_SUCCESS(status))
{
TraceEvents(TRACE_LEVEL_ERROR, DBG_PNP,
"DeviceConfigureRequestDispatching failed (Read Queue): 0x%x\n", status);
break;
}
WDF_IO_QUEUE_CONFIG_INIT(&queueConfig, WdfIoQueueDispatchSequential);
queueConfig.AllowZeroLengthRequests = WdfFalse;
queueConfig.EvtIoWrite = VIOSerialPortWrite;
status = WdfIoQueueCreate(hChild, &queueConfig,
WDF_NO_OBJECT_ATTRIBUTES, &pport->WriteQueue);
if (!NT_SUCCESS(status))
{
TraceEvents(TRACE_LEVEL_ERROR, DBG_PNP,
"WdfIoQueueCreate failed (Write Queue): 0x%x\n", status);
break;
}
status = WdfDeviceConfigureRequestDispatching(
hChild,
pport->WriteQueue,
WdfRequestTypeWrite
);
if(!NT_SUCCESS(status))
{
TraceEvents(TRACE_LEVEL_ERROR, DBG_PNP,
"DeviceConfigureRequestDispatching failed (Write Queue): 0x%x\n", status);
break;
}
WDF_DEVICE_PNP_CAPABILITIES_INIT(&pnpCaps);
pnpCaps.NoDisplayInUI = WdfTrue;
pnpCaps.Removable = WdfTrue;
pnpCaps.EjectSupported = WdfTrue;
pnpCaps.SurpriseRemovalOK= WdfTrue;
pnpCaps.Address = pport->DeviceId;
pnpCaps.UINumber = pport->PortId;
WdfDeviceSetPnpCapabilities(hChild, &pnpCaps);
WDF_DEVICE_STATE_INIT(&deviceState);
deviceState.DontDisplayInUI = WdfTrue;
WdfDeviceSetDeviceState(hChild, &deviceState);
status = WdfDeviceCreateDeviceInterface(
hChild,
&GUID_VIOSERIAL_PORT,
NULL
);
if (!NT_SUCCESS (status))
{
TraceEvents(TRACE_LEVEL_ERROR, DBG_PNP,
"WdfDeviceCreateDeviceInterface failed 0x%x\n", status);
break;
}
WDF_OBJECT_ATTRIBUTES_INIT(&attributes);
attributes.ParentObject = hChild;
status = WdfSpinLockCreate(
&attributes,
&pport->InBufLock
);
if (!NT_SUCCESS(status))
{
TraceEvents(TRACE_LEVEL_ERROR, DBG_PNP,
"WdfSpinLockCreate failed 0x%x\n", status);
break;
}
WDF_OBJECT_ATTRIBUTES_INIT(&attributes);
attributes.ParentObject = hChild;
status = WdfSpinLockCreate(
&attributes,
&pport->OutVqLock
);
if (!NT_SUCCESS(status))
{
TraceEvents(TRACE_LEVEL_ERROR, DBG_PNP,
"WdfSpinLockCreate failed 0x%x\n", status);
break;
}
} while (0);
if (!NT_SUCCESS(status))
{
// We can send this before PDO is PRESENT since the device won't send any response.
VIOSerialSendCtrlMsg(pport->BusDevice, pport->PortId, VIRTIO_CONSOLE_PORT_READY, 0);
}
TraceEvents(TRACE_LEVEL_INFORMATION, DBG_PNP, "<-- %s status 0x%x\n", __FUNCTION__, status);
return status;
}
NTSTATUS
Bus_EvtDeviceAdd(
IN WDFDRIVER Driver,
IN PWDFDEVICE_INIT DeviceInit
)
/*++
Routine Description:
Bus_EvtDeviceAdd is called by the framework in response to AddDevice
call from the PnP manager. We create and initialize a device object to
represent a new instance of toaster bus.
Arguments:
Driver - Handle to a framework driver object created in DriverEntry
DeviceInit - Pointer to a framework-allocated WDFDEVICE_INIT structure.
Return Value:
NTSTATUS
--*/
{
WDF_CHILD_LIST_CONFIG config;
WDF_OBJECT_ATTRIBUTES fdoAttributes;
NTSTATUS status;
WDFDEVICE device;
WDF_IO_QUEUE_CONFIG queueConfig;
PNP_BUS_INFORMATION busInfo;
//PFDO_DEVICE_DATA deviceData;
WDFQUEUE queue;
UNREFERENCED_PARAMETER(Driver);
PAGED_CODE ();
KdPrint(("Bus_EvtDeviceAdd: 0x%p\n", Driver));
//
// Initialize all the properties specific to the device.
// Framework has default values for the one that are not
// set explicitly here. So please read the doc and make sure
// you are okay with the defaults.
//
WdfDeviceInitSetDeviceType(DeviceInit, FILE_DEVICE_BUS_EXTENDER);
WdfDeviceInitSetExclusive(DeviceInit, TRUE);
//
// Since this is pure software bus enumerator, we don't have to register for
// any PNP/Power callbacks. Framework will take the default action for
// all the PNP and Power IRPs.
//
//
// WDF_ DEVICE_LIST_CONFIG describes how the framework should handle
// dynamic child enumeration on behalf of the driver writer.
// Since we are a bus driver, we need to specify identification description
// for our child devices. This description will serve as the identity of our
// child device. Since the description is opaque to the framework, we
// have to provide bunch of callbacks to compare, copy, or free
// any other resources associated with the description.
//
WDF_CHILD_LIST_CONFIG_INIT(&config,
sizeof(PDO_IDENTIFICATION_DESCRIPTION),
Bus_EvtDeviceListCreatePdo // callback to create a child device.
);
//
// This function pointer will be called when the framework needs to copy a
// identification description from one location to another. An implementation
// of this function is only necessary if the description contains description
// relative pointer values (like LIST_ENTRY for instance) .
// If set to NULL, the framework will use RtlCopyMemory to copy an identification .
// description. In this sample, it's not required to provide these callbacks.
// they are added just for illustration.
//
config.EvtChildListIdentificationDescriptionDuplicate =
Bus_EvtChildListIdentificationDescriptionDuplicate;
//
// This function pointer will be called when the framework needs to compare
// two identificaiton descriptions. If left NULL a call to RtlCompareMemory
// will be used to compare two identificaiton descriptions.
//
config.EvtChildListIdentificationDescriptionCompare =
Bus_EvtChildListIdentificationDescriptionCompare;
//
// This function pointer will be called when the framework needs to free a
// identification description. An implementation of this function is only
// necessary if the description contains dynamically allocated memory
// (by the driver writer) that needs to be freed. The actual identification
// description pointer itself will be freed by the framework.
//
config.EvtChildListIdentificationDescriptionCleanup =
Bus_EvtChildListIdentificationDescriptionCleanup;
//
// Tell the framework to use the built-in childlist to track the state
// of the device based on the configuration we just created.
//
WdfFdoInitSetDefaultChildListConfig(DeviceInit,
&config,
WDF_NO_OBJECT_ATTRIBUTES);
//
// Initialize attributes structure to specify size and accessor function
// for storing device context.
//
WDF_OBJECT_ATTRIBUTES_INIT_CONTEXT_TYPE(&fdoAttributes, FDO_DEVICE_DATA);
//
// Create a framework device object. In response to this call, framework
// creates a WDM deviceobject and attach to the PDO.
//
status = WdfDeviceCreate(&DeviceInit, &fdoAttributes, &device);
if (!NT_SUCCESS(status)) {
KdPrint(("Error creating device 0x%x\n", status));
return status;
}
//
// Configure a default queue so that requests that are not
// configure-fowarded using WdfDeviceConfigureRequestDispatching to goto
// other queues get dispatched here.
//
WDF_IO_QUEUE_CONFIG_INIT_DEFAULT_QUEUE(
&queueConfig,
WdfIoQueueDispatchParallel
);
queueConfig.EvtIoDeviceControl = Bus_EvtIoDeviceControl;
//
// By default, Static Driver Verifier (SDV) displays a warning if it
// doesn't find the EvtIoStop callback on a power-managed queue.
// The 'assume' below causes SDV to suppress this warning. If the driver
// has not explicitly set PowerManaged to WdfFalse, the framework creates
// power-managed queues when the device is not a filter driver. Normally
// the EvtIoStop is required for power-managed queues, but for this driver
// it is not needed b/c the driver doesn't hold on to the requests or
// forward them to other drivers. This driver completes the requests
// directly in the queue's handlers. If the EvtIoStop callback is not
// implemented, the framework waits for all driver-owned requests to be
// done before moving in the Dx/sleep states or before removing the
// device, which is the correct behavior for this type of driver.
// If the requests were taking an indeterminate amount of time to complete,
// or if the driver forwarded the requests to a lower driver/another stack,
// the queue should have an EvtIoStop/EvtIoResume.
//
__analysis_assume(queueConfig.EvtIoStop != 0);
status = WdfIoQueueCreate( device,
&queueConfig,
WDF_NO_OBJECT_ATTRIBUTES,
&queue );
__analysis_assume(queueConfig.EvtIoStop == 0);
if (!NT_SUCCESS(status)) {
KdPrint(("WdfIoQueueCreate failed status 0x%x\n", status));
return status;
}
//
// Get the device context.
//
//deviceData = FdoGetData(device);
//
// Create device interface for this device. The interface will be
// enabled by the framework when we return from StartDevice successfully.
// Clients of this driver will open this interface and send ioctls.
//
status = WdfDeviceCreateDeviceInterface(
device,
&GUID_DEVINTERFACE_BUSENUM_TOASTER,
NULL // No Reference String. If you provide one it will appended to the
); // symbolic link. Some drivers register multiple interfaces for the same device
// and use the reference string to distinguish between them
if (!NT_SUCCESS(status)) {
return status;
}
//
// This value is used in responding to the IRP_MN_QUERY_BUS_INFORMATION
// for the child devices. This is an optional information provided to
// uniquely idenitfy the bus the device is connected.
//
busInfo.BusTypeGuid = GUID_DEVCLASS_TOASTER;
busInfo.LegacyBusType = PNPBus;
busInfo.BusNumber = 0;
WdfDeviceSetBusInformationForChildren(device, &busInfo);
status = Bus_WmiRegistration(device);
if (!NT_SUCCESS(status)) {
return status;
}
//
// Check the registry to see if we need to enumerate child devices during
// start.
//
status = Bus_DoStaticEnumeration(device);
return status;
}
NTSTATUS
XenUsb_EvtDriverDeviceAdd(WDFDRIVER driver, PWDFDEVICE_INIT device_init)
{
NTSTATUS status;
WDF_CHILD_LIST_CONFIG child_list_config;
WDFDEVICE device;
PXENUSB_DEVICE_DATA xudd;
//UNICODE_STRING reference;
WDF_OBJECT_ATTRIBUTES device_attributes;
PNP_BUS_INFORMATION pbi;
WDF_PNPPOWER_EVENT_CALLBACKS pnp_power_callbacks;
WDF_DEVICE_POWER_CAPABILITIES power_capabilities;
WDF_IO_QUEUE_CONFIG queue_config;
UCHAR pnp_minor_functions[] = { IRP_MN_QUERY_INTERFACE };
DECLARE_CONST_UNICODE_STRING(symbolicname_name, L"SymbolicName");
WDFSTRING symbolicname_value_wdfstring;
WDFKEY device_key;
UNICODE_STRING symbolicname_value;
UNREFERENCED_PARAMETER(driver);
FUNCTION_ENTER();
WDF_PNPPOWER_EVENT_CALLBACKS_INIT(&pnp_power_callbacks);
pnp_power_callbacks.EvtDeviceD0Entry = XenUsb_EvtDeviceD0Entry;
pnp_power_callbacks.EvtDeviceD0Exit = XenUsb_EvtDeviceD0Exit;
WdfDeviceInitSetPnpPowerEventCallbacks(device_init, &pnp_power_callbacks);
status = WdfDeviceInitAssignWdmIrpPreprocessCallback(device_init, XenUsb_EvtDeviceWdmIrpPreprocessQUERY_INTERFACE,
IRP_MJ_PNP, pnp_minor_functions, ARRAY_SIZE(pnp_minor_functions));
if (!NT_SUCCESS(status))
{
return status;
}
WdfDeviceInitSetDeviceType(device_init, FILE_DEVICE_BUS_EXTENDER);
WdfDeviceInitSetExclusive(device_init, FALSE);
WDF_CHILD_LIST_CONFIG_INIT(&child_list_config, sizeof(XENUSB_PDO_IDENTIFICATION_DESCRIPTION), XenUsb_EvtChildListCreateDevice);
child_list_config.EvtChildListScanForChildren = XenUsb_EvtChildListScanForChildren;
WdfFdoInitSetDefaultChildListConfig(device_init, &child_list_config, WDF_NO_OBJECT_ATTRIBUTES);
WdfDeviceInitSetIoType(device_init, WdfDeviceIoBuffered);
WdfDeviceInitSetPowerNotPageable(device_init);
WDF_OBJECT_ATTRIBUTES_INIT_CONTEXT_TYPE(&device_attributes, XENUSB_DEVICE_DATA);
status = WdfDeviceCreate(&device_init, &device_attributes, &device);
if (!NT_SUCCESS(status))
{
FUNCTION_MSG("Error creating device %08x\n", status);
return status;
}
xudd = GetXudd(device);
xudd->pdo = WdfDeviceWdmGetPhysicalDevice(device);
xudd->child_list = WdfFdoGetDefaultChildList(device);
KeInitializeEvent(&xudd->backend_event, SynchronizationEvent, FALSE);
InitializeListHead(&xudd->partial_pvurb_queue);
InitializeListHead(&xudd->partial_pvurb_ring);
KeInitializeDpc(&xudd->event_dpc, XenUsb_HandleEventDpc, xudd);
KeInitializeSpinLock(&xudd->urb_ring_lock);
WDF_IO_QUEUE_CONFIG_INIT_DEFAULT_QUEUE(&queue_config, WdfIoQueueDispatchParallel);
queue_config.PowerManaged = FALSE; /* ? */
queue_config.EvtIoDeviceControl = XenUsb_EvtIoDeviceControl;
queue_config.EvtIoInternalDeviceControl = XenUsb_EvtIoInternalDeviceControl;
queue_config.EvtIoDefault = XenUsb_EvtIoDefault;
status = WdfIoQueueCreate(device, &queue_config, WDF_NO_OBJECT_ATTRIBUTES, &xudd->io_queue);
if (!NT_SUCCESS(status)) {
FUNCTION_MSG("Error creating io_queue 0x%x\n", status);
return status;
}
WDF_IO_QUEUE_CONFIG_INIT(&queue_config, WdfIoQueueDispatchParallel);
queue_config.PowerManaged = FALSE; /* ? */
//queue_config.EvtIoDeviceControl = XenUsb_EvtIoDeviceControl;
queue_config.EvtIoInternalDeviceControl = XenUsb_EvtIoInternalDeviceControl_PVURB;
//queue_config.EvtIoDefault = XenUsb_EvtIoDefault;
queue_config.Settings.Parallel.NumberOfPresentedRequests = USB_URB_RING_SIZE; /* the queue controls if the ring is full */
status = WdfIoQueueCreate(device, &queue_config, WDF_NO_OBJECT_ATTRIBUTES, &xudd->pvurb_queue);
if (!NT_SUCCESS(status)) {
FUNCTION_MSG("Error creating urb_queue 0x%x\n", status);
return status;
}
WDF_DEVICE_POWER_CAPABILITIES_INIT(&power_capabilities);
power_capabilities.DeviceD1 = WdfTrue;
power_capabilities.WakeFromD1 = WdfTrue;
power_capabilities.DeviceWake = PowerDeviceD1;
power_capabilities.DeviceState[PowerSystemWorking] = PowerDeviceD0;
power_capabilities.DeviceState[PowerSystemSleeping1] = PowerDeviceD1;
power_capabilities.DeviceState[PowerSystemSleeping2] = PowerDeviceD2;
power_capabilities.DeviceState[PowerSystemSleeping3] = PowerDeviceD2;
power_capabilities.DeviceState[PowerSystemHibernate] = PowerDeviceD3;
power_capabilities.DeviceState[PowerSystemShutdown] = PowerDeviceD3;
WdfDeviceSetPowerCapabilities(device, &power_capabilities);
WdfDeviceSetSpecialFileSupport(device, WdfSpecialFilePaging, TRUE);
WdfDeviceSetSpecialFileSupport(device, WdfSpecialFileHibernation, TRUE);
WdfDeviceSetSpecialFileSupport(device, WdfSpecialFileDump, TRUE);
pbi.BusTypeGuid = GUID_BUS_TYPE_XEN;
pbi.LegacyBusType = PNPBus;
pbi.BusNumber = 0;
WdfDeviceSetBusInformationForChildren(device, &pbi);
status = WdfDeviceCreateDeviceInterface(device, &GUID_DEVINTERFACE_USB_HOST_CONTROLLER, NULL);
if (!NT_SUCCESS(status)) {
FUNCTION_MSG("WdfDeviceCreateDeviceInterface returned %08x\n");
return status;
}
/* USB likes to have a registry key with the symbolic link name in it */
status = WdfStringCreate(NULL, WDF_NO_OBJECT_ATTRIBUTES, &symbolicname_value_wdfstring);
if (!NT_SUCCESS(status)) {
FUNCTION_MSG("WdfStringCreate returned %08x\n");
return status;
}
status = WdfDeviceRetrieveDeviceInterfaceString(device, &GUID_DEVINTERFACE_USB_HOST_CONTROLLER, NULL, symbolicname_value_wdfstring);
if (!NT_SUCCESS(status)) {
FUNCTION_MSG("WdfDeviceRetrieveDeviceInterfaceString returned %08x\n");
return status;
}
WdfStringGetUnicodeString(symbolicname_value_wdfstring, &symbolicname_value);
status = WdfDeviceOpenRegistryKey(device, PLUGPLAY_REGKEY_DEVICE, KEY_SET_VALUE, WDF_NO_OBJECT_ATTRIBUTES, &device_key);
if (!NT_SUCCESS(status)) {
FUNCTION_MSG("WdfDeviceOpenRegistryKey returned %08x\n");
return status;
}
WdfRegistryAssignUnicodeString(device_key, &symbolicname_name, &symbolicname_value);
FUNCTION_EXIT();
return status;
}
NTSTATUS
NonPnpDeviceAdd(
IN WDFDRIVER Driver,
IN PWDFDEVICE_INIT DeviceInit
)
/*++
Routine Description:
Called by the DriverEntry to create a control-device. This call is
responsible for freeing the memory for DeviceInit.
Arguments:
DriverObject - a pointer to the object that represents this device
driver.
DeviceInit - Pointer to a driver-allocated WDFDEVICE_INIT structure.
Return Value:
STATUS_SUCCESS if initialized; an error otherwise.
--*/
{
NTSTATUS status;
WDF_OBJECT_ATTRIBUTES attributes;
WDF_IO_QUEUE_CONFIG ioQueueConfig;
WDF_FILEOBJECT_CONFIG fileConfig;
WDFQUEUE queue;
WDFDEVICE controlDevice;
DECLARE_CONST_UNICODE_STRING(ntDeviceName, NTDEVICE_NAME_STRING) ;
DECLARE_CONST_UNICODE_STRING(symbolicLinkName, SYMBOLIC_NAME_STRING) ;
UNREFERENCED_PARAMETER( Driver );
PAGED_CODE();
TraceEvents(TRACE_LEVEL_VERBOSE, DBG_INIT,
"NonPnpDeviceAdd DeviceInit %p\n", DeviceInit);
//
// Set exclusive to TRUE so that no more than one app can talk to the
// control device at any time.
//
WdfDeviceInitSetExclusive(DeviceInit, TRUE);
WdfDeviceInitSetIoType(DeviceInit, WdfDeviceIoBuffered);
status = WdfDeviceInitAssignName(DeviceInit, &ntDeviceName);
if (!NT_SUCCESS(status)) {
TraceEvents(TRACE_LEVEL_ERROR, DBG_INIT, "WdfDeviceInitAssignName failed %!STATUS!", status);
goto End;
}
WdfControlDeviceInitSetShutdownNotification(DeviceInit,
NonPnpShutdown,
WdfDeviceShutdown);
//
// Initialize WDF_FILEOBJECT_CONFIG_INIT struct to tell the
// framework whether you are interested in handling Create, Close and
// Cleanup requests that gets generated when an application or another
// kernel component opens an handle to the device. If you don't register
// the framework default behaviour would be to complete these requests
// with STATUS_SUCCESS. A driver might be interested in registering these
// events if it wants to do security validation and also wants to maintain
// per handle (fileobject) context.
//
WDF_FILEOBJECT_CONFIG_INIT(
&fileConfig,
NonPnpEvtDeviceFileCreate,
NonPnpEvtFileClose,
WDF_NO_EVENT_CALLBACK // not interested in Cleanup
);
WdfDeviceInitSetFileObjectConfig(DeviceInit,
&fileConfig,
WDF_NO_OBJECT_ATTRIBUTES);
//
// In order to support METHOD_NEITHER Device controls, or
// NEITHER device I/O type, we need to register for the
// EvtDeviceIoInProcessContext callback so that we can handle the request
// in the calling threads context.
//
WdfDeviceInitSetIoInCallerContextCallback(DeviceInit,
NonPnpEvtDeviceIoInCallerContext);
//
// Specify the size of device context
//
WDF_OBJECT_ATTRIBUTES_INIT_CONTEXT_TYPE(&attributes,
CONTROL_DEVICE_EXTENSION);
status = WdfDeviceCreate(&DeviceInit,
&attributes,
&controlDevice);
if (!NT_SUCCESS(status)) {
TraceEvents(TRACE_LEVEL_ERROR, DBG_INIT, "WdfDeviceCreate failed %!STATUS!", status);
goto End;
}
//
// Create a symbolic link for the control object so that usermode can open
// the device.
//
status = WdfDeviceCreateSymbolicLink(controlDevice,
&symbolicLinkName);
if (!NT_SUCCESS(status)) {
//
// Control device will be deleted automatically by the framework.
//
TraceEvents(TRACE_LEVEL_ERROR, DBG_INIT, "WdfDeviceCreateSymbolicLink failed %!STATUS!", status);
goto End;
}
//
// Configure a default queue so that requests that are not
// configure-fowarded using WdfDeviceConfigureRequestDispatching to goto
// other queues get dispatched here.
//
WDF_IO_QUEUE_CONFIG_INIT_DEFAULT_QUEUE(&ioQueueConfig,
WdfIoQueueDispatchSequential);
ioQueueConfig.EvtIoRead = FileEvtIoRead;
ioQueueConfig.EvtIoWrite = FileEvtIoWrite;
ioQueueConfig.EvtIoDeviceControl = FileEvtIoDeviceControl;
WDF_OBJECT_ATTRIBUTES_INIT(&attributes);
//
// Since we are using Zw function set execution level to passive so that
// framework ensures that our Io callbacks called at only passive-level
// even if the request came in at DISPATCH_LEVEL from another driver.
//
//attributes.ExecutionLevel = WdfExecutionLevelPassive;
//
// By default, Static Driver Verifier (SDV) displays a warning if it
// doesn't find the EvtIoStop callback on a power-managed queue.
// The 'assume' below causes SDV to suppress this warning. If the driver
// has not explicitly set PowerManaged to WdfFalse, the framework creates
// power-managed queues when the device is not a filter driver. Normally
// the EvtIoStop is required for power-managed queues, but for this driver
// it is not needed b/c the driver doesn't hold on to the requests or
// forward them to other drivers. This driver completes the requests
// directly in the queue's handlers. If the EvtIoStop callback is not
// implemented, the framework waits for all driver-owned requests to be
// done before moving in the Dx/sleep states or before removing the
// device, which is the correct behavior for this type of driver.
// If the requests were taking an indeterminate amount of time to complete,
// or if the driver forwarded the requests to a lower driver/another stack,
// the queue should have an EvtIoStop/EvtIoResume.
//
__analysis_assume(ioQueueConfig.EvtIoStop != 0);
status = WdfIoQueueCreate(controlDevice,
&ioQueueConfig,
&attributes,
&queue // pointer to default queue
);
__analysis_assume(ioQueueConfig.EvtIoStop == 0);
if (!NT_SUCCESS(status)) {
TraceEvents(TRACE_LEVEL_ERROR, DBG_INIT, "WdfIoQueueCreate failed %!STATUS!", status);
goto End;
}
//
// Control devices must notify WDF when they are done initializing. I/O is
// rejected until this call is made.
//
WdfControlFinishInitializing(controlDevice);
End:
//
// If the device is created successfully, framework would clear the
// DeviceInit value. Otherwise device create must have failed so we
// should free the memory ourself.
//
if (DeviceInit != NULL) {
WdfDeviceInitFree(DeviceInit);
}
return status;
}
NTSTATUS
kmdf1394_EvtDeviceAdd (
IN WDFDRIVER Driver,
IN PWDFDEVICE_INIT DeviceInit)
/*++
Routine Description:
EvtDeviceAdd is called by the framework in response to AddDevice
call from the PnP manager.
Arguments:
Driver - Handle to a framework driver object created in DriverEntry
DeviceInit - Pointer to a framework-allocated WDFDEVICE_INIT structure.
Return Value:
NTSTATUS
--*/
{
NTSTATUS ntStatus = STATUS_SUCCESS;
PDEVICE_EXTENSION deviceExtension;
WDF_PNPPOWER_EVENT_CALLBACKS pnpPowerCallbacks;
WDF_OBJECT_ATTRIBUTES fdoAttributes,lockAttributes;
WDFDEVICE device;
WDF_DEVICE_PNP_CAPABILITIES pnpCaps;
WDF_IO_QUEUE_CONFIG ioQueueConfig;
UNREFERENCED_PARAMETER (Driver);
PAGED_CODE();
Enter();
//
// Zero out the PnpPowerCallbacks structure.
//
WDF_PNPPOWER_EVENT_CALLBACKS_INIT(&pnpPowerCallbacks);
//
// Set Callbacks for any of the functions we are interested in.
// If no callback is set, Framework will take the default action
// by itself.
//
// These two callbacks set up and tear down hardware state,
// specifically that which only has to be done once.
//
pnpPowerCallbacks.EvtDevicePrepareHardware = kmdf1394_EvtPrepareHardware;
pnpPowerCallbacks.EvtDeviceReleaseHardware = kmdf1394_EvtReleaseHardware;
pnpPowerCallbacks.EvtDeviceSelfManagedIoCleanup = \
kmdf1394_EvtDeviceSelfManagedIoCleanup;
pnpPowerCallbacks.EvtDeviceD0Entry = kmdf1394_EvtDeviceD0Entry;
pnpPowerCallbacks.EvtDeviceD0Exit = kmdf1394_EvtDeviceD0Exit;
//
// Register the PnP and power callbacks. Power policy related callbacks
// will be registered// later in SotwareInit.
//
WdfDeviceInitSetPnpPowerEventCallbacks (DeviceInit, &pnpPowerCallbacks);
if (!NT_SUCCESS (ntStatus))
{
DoTraceLevelMessage(TRACE_LEVEL_ERROR,
TRACE_FLAG_PNP,
"WdfDeviceInitSetPnpPowerEventCallbacks failed %!STATUS!\n",
ntStatus);
return ntStatus;
}
//
// We'll allow multiple handles to be opened to this device driver
// so we'll set exclusivity to FALSE.
//
WdfDeviceInitSetExclusive (DeviceInit, FALSE);
//
// Specify the size and type of device context.
//
WDF_OBJECT_ATTRIBUTES_INIT_CONTEXT_TYPE (&fdoAttributes, DEVICE_EXTENSION);
ntStatus = WdfDeviceCreate (&DeviceInit, &fdoAttributes, &device);
if (!NT_SUCCESS (ntStatus))
{
DoTraceLevelMessage(TRACE_LEVEL_ERROR,
TRACE_FLAG_PNP,
"WdfDeviceInitialize failed %!STATUS!\n",
ntStatus);
return ntStatus;
}
deviceExtension = GetDeviceContext (device);
deviceExtension->WdfDevice = device;
DoTraceLevelMessage(TRACE_LEVEL_INFORMATION,
TRACE_FLAG_PNP,
"PDO(0x%p) FDO(0x%p), Lower(0x%p) DevExt (0x%p)\n",
WdfDeviceWdmGetPhysicalDevice (device),
WdfDeviceWdmGetDeviceObject (device),
WdfDeviceWdmGetAttachedDevice(device),
deviceExtension);
//
// Tell the Framework that this device will need an interface so that
// application can interact with it.
//
ntStatus = WdfDeviceCreateDeviceInterface (
device,
(LPGUID) &GUID_KMDF_VDEV,
NULL);
if (!NT_SUCCESS (ntStatus))
{
DoTraceLevelMessage(TRACE_LEVEL_ERROR,
TRACE_FLAG_PNP,
"WdfDeviceCreateDeviceInterface failed %!STATUS!\n",
ntStatus);
return ntStatus;
}
//
// Tell the framework to set the SurpriseRemovalOK in the DeviceCaps so
// that you don't get the popup in usermode (on Win2K) when you surprise
// remove the device.
//
WDF_DEVICE_PNP_CAPABILITIES_INIT (&pnpCaps);
pnpCaps.SurpriseRemovalOK = WdfTrue;
WdfDeviceSetPnpCapabilities (device, &pnpCaps);
//
// save the device object we created as our physical device object
//
deviceExtension->PhysicalDeviceObject = \
WdfDeviceWdmGetPhysicalDevice (device);
if (NULL == deviceExtension->PhysicalDeviceObject)
{
DoTraceLevelMessage(TRACE_LEVEL_ERROR,
TRACE_FLAG_PNP,
"WdfDeviceWdmGetPhysicalDevice: NULL DeviceObject\n");
return STATUS_UNSUCCESSFUL;
}
//
// This is our default IoTarget representing the deviceobject
// we are attached to.
//
deviceExtension->StackIoTarget = WdfDeviceGetIoTarget(device);
deviceExtension->StackDeviceObject = WdfDeviceWdmGetAttachedDevice(device);
if (NULL == deviceExtension->StackDeviceObject)
{
DoTraceLevelMessage(TRACE_LEVEL_ERROR,
TRACE_FLAG_PNP,
"WdfDeviceWdmGetAttachedDevice: NULL DeviceObject\n");
return STATUS_UNSUCCESSFUL;
}
//
// Create a automanaged queue for dispatching ioctl requests.
// All other requests are automatically failed by the framework.
// By creating an automanaged queue we don't have to worry about
// PNP/Power synchronization.
// A default queue gets all the requests that are not
// configure-fowarded using WdfDeviceConfigureRequestDispatching.
//
WDF_IO_QUEUE_CONFIG_INIT_DEFAULT_QUEUE (
&ioQueueConfig,
WdfIoQueueDispatchParallel);
ioQueueConfig.EvtIoDeviceControl = kmdf1394_EvtIoDeviceControl;
__analysis_assume(ioQueueConfig.EvtIoStop != 0);
ntStatus = WdfIoQueueCreate (
deviceExtension->WdfDevice,
&ioQueueConfig,
WDF_NO_OBJECT_ATTRIBUTES,
&deviceExtension->IoctlQueue);
__analysis_assume(ioQueueConfig.EvtIoStop == 0);
if (!NT_SUCCESS (ntStatus))
{
DoTraceLevelMessage(TRACE_LEVEL_ERROR,
TRACE_FLAG_PNP,
"WdfIoQueueCreate failed %!STATUS!\n",
ntStatus);
return ntStatus;
}
//
// Create an additional queue to hold bus reset requests.
//
WDF_IO_QUEUE_CONFIG_INIT (&ioQueueConfig, WdfIoQueueDispatchManual);
__analysis_assume(ioQueueConfig.EvtIoStop != 0);
ntStatus = WdfIoQueueCreate (
deviceExtension->WdfDevice,
&ioQueueConfig,
WDF_NO_OBJECT_ATTRIBUTES,
&deviceExtension->BusResetRequestsQueue);
__analysis_assume(ioQueueConfig.EvtIoStop == 0);
if(!NT_SUCCESS (ntStatus))
{
DoTraceLevelMessage(TRACE_LEVEL_ERROR,
TRACE_FLAG_PNP,
"Error Creating Reset Request Queue %!STATUS!\n",
ntStatus);
return ntStatus;
}
WDF_OBJECT_ATTRIBUTES_INIT (&lockAttributes);
lockAttributes.ParentObject = device;
ntStatus = WdfSpinLockCreate (&lockAttributes,&deviceExtension->CromSpinLock);
if(!NT_SUCCESS (ntStatus))
{
DoTraceLevelMessage(TRACE_LEVEL_ERROR,
TRACE_FLAG_PNP,
"WdfSpinLockCreate CromSpinLock failed %!STATUS!\n",
ntStatus);
return ntStatus;
}
WDF_OBJECT_ATTRIBUTES_INIT (&lockAttributes);
lockAttributes.ParentObject = device;
ntStatus = WdfSpinLockCreate (
&lockAttributes,
&deviceExtension->AsyncSpinLock);
if(!NT_SUCCESS (ntStatus))
{
DoTraceLevelMessage(TRACE_LEVEL_ERROR,
TRACE_FLAG_PNP,
"WdfSpinLockCreate AsyncSpinLock failed %!STATUS!\n",
ntStatus);
return ntStatus;
}
WDF_OBJECT_ATTRIBUTES_INIT (&lockAttributes);
lockAttributes.ParentObject = device;
ntStatus = WdfSpinLockCreate (
&lockAttributes,
&deviceExtension->IsochSpinLock );
if(!NT_SUCCESS (ntStatus))
{
DoTraceLevelMessage(TRACE_LEVEL_ERROR,
TRACE_FLAG_PNP,
"WdfSpinLockCreate IsochSpinLock failed %!STATUS!\n",
ntStatus);
return ntStatus;
}
WDF_OBJECT_ATTRIBUTES_INIT (&lockAttributes);
lockAttributes.ParentObject = device;
ntStatus = WdfSpinLockCreate (
&lockAttributes,
&deviceExtension->IsochResourceSpinLock);
if(!NT_SUCCESS (ntStatus))
{
DoTraceLevelMessage(TRACE_LEVEL_ERROR,
TRACE_FLAG_PNP,
"WdfSpinLockCreate IsochResourceSpinLock failed %!STATUS!\n",
ntStatus);
return ntStatus;
}
InitializeListHead (&deviceExtension->CromData);
InitializeListHead (&deviceExtension->AsyncAddressData);
InitializeListHead (&deviceExtension->IsochDetachData);
InitializeListHead (&deviceExtension->IsochResourceData);
ExitS(ntStatus);
return(ntStatus);
} // kmdf1394_PnpAddDevice
/**
* @brief Called by the framework when a new PDO has arrived that this driver manages.
* The device in question is not operational at this point in time.
*
* @param[in] Driver handle to WDFDRIVER object created by DriverEntry()
* @param[in,out] DeviceInit device init object provided by framework.
*
* @returns NTSTATUS value indicating success or failure.
*
*/
NTSTATUS
FdoEvtDeviceAdd(
_In_ WDFDRIVER Driver,
_Inout_ PWDFDEVICE_INIT DeviceInit
)
{
UNREFERENCED_PARAMETER(Driver);
WDF_OBJECT_ATTRIBUTES attributes;
NTSTATUS status;
TraceEvents(TRACE_LEVEL_INFORMATION, TRACE_DEVICE,
__FUNCTION__"\n");
WdfDeviceInitSetDeviceType(DeviceInit, FILE_DEVICE_BUS_EXTENDER);
WdfDeviceInitSetExclusive(DeviceInit, FALSE);
WdfDeviceInitSetIoType(DeviceInit, WdfDeviceIoDirect);
WDF_OBJECT_ATTRIBUTES_INIT_CONTEXT_TYPE(&attributes, USB_FDO_CONTEXT);
attributes.EvtCleanupCallback = FdoEvtDeviceContextCleanup;
//
// Device state callbacks.
//
WDF_PNPPOWER_EVENT_CALLBACKS pnpPowerCallbacks;
WDF_PNPPOWER_EVENT_CALLBACKS_INIT(&pnpPowerCallbacks);
pnpPowerCallbacks.EvtDevicePrepareHardware = FdoEvtDevicePrepareHardware;
pnpPowerCallbacks.EvtDeviceReleaseHardware = FdoEvtDeviceReleaseHardware;
pnpPowerCallbacks.EvtDeviceD0Entry = FdoEvtDeviceD0Entry;
pnpPowerCallbacks.EvtDeviceD0EntryPostInterruptsEnabled = FdoEvtDeviceD0EntryPostInterruptsEnabled;
pnpPowerCallbacks.EvtDeviceD0Exit = FdoEvtDeviceD0Exit;
pnpPowerCallbacks.EvtDeviceSurpriseRemoval = FdoEvtDeviceSurpriseRemoval;
WdfDeviceInitSetPnpPowerEventCallbacks(DeviceInit, &pnpPowerCallbacks);
//
// establish a request context
//
WDF_OBJECT_ATTRIBUTES requestAttributes;
WDF_OBJECT_ATTRIBUTES_INIT_CONTEXT_TYPE(&requestAttributes, FDO_REQUEST_CONTEXT);
WdfDeviceInitSetRequestAttributes(DeviceInit, &requestAttributes);
//
// static verifier seems to have a rule that the FDO must call
// WdfFdoInitSetDefaultChildListConfig if any component in the driver has
// dynamic child devices, and the roothub has one if it is not operating in
// connect usb hub mode.
//
WDF_CHILD_LIST_CONFIG config;
WDF_CHILD_LIST_CONFIG_INIT(&config,
sizeof(PDO_INDENTIFICATION_DESCRIPTION),
FdoEvtChildListCreateDevice);
WdfFdoInitSetDefaultChildListConfig(DeviceInit,
&config,
WDF_NO_OBJECT_ATTRIBUTES);
//
// add a preprocess callback for QueryInterface to support multi-version USBDI intefaces
//
UCHAR MinorFunctionTable[1] = {IRP_MN_QUERY_INTERFACE};
status = WdfDeviceInitAssignWdmIrpPreprocessCallback(
DeviceInit,
FdoPreProcessQueryInterface,
IRP_MJ_PNP,
MinorFunctionTable,
1);
if (!NT_SUCCESS(status))
{
TraceEvents(TRACE_LEVEL_ERROR, TRACE_DEVICE,
__FUNCTION__": WdfDeviceInitAssignWdmIrpPreprocessCallback failed error %x\n",
status);
return status;
}
//
// Add create/close handlers
//
WDF_OBJECT_ATTRIBUTES fileAttributes;
WDF_OBJECT_ATTRIBUTES_INIT(&fileAttributes);
fileAttributes.SynchronizationScope = WdfSynchronizationScopeNone;
WDF_FILEOBJECT_CONFIG FileObjectConfig;
WDF_FILEOBJECT_CONFIG_INIT(
&FileObjectConfig,
FdoEvtDeviceFileCreate,
FdoEvtFileClose,
WDF_NO_EVENT_CALLBACK);
WdfDeviceInitSetFileObjectConfig(
DeviceInit,
&FileObjectConfig,
&fileAttributes);
WDFDEVICE device;
status = WdfDeviceCreate(&DeviceInit, &attributes, &device);
if (!NT_SUCCESS(status))
{
TraceEvents(TRACE_LEVEL_ERROR, TRACE_DEVICE,
__FUNCTION__": WdfDeviceCreate failed error %x\n",
status);
return status;
}
PUSB_FDO_CONTEXT fdoContext = DeviceGetFdoContext(device);
RtlZeroMemory(fdoContext, sizeof(USB_FDO_CONTEXT));
fdoContext->WdfDevice = device;
KeInitializeEvent(&fdoContext->resetCompleteEvent, SynchronizationEvent, FALSE);
//
// allocate the dpc request collection.
//
WDF_OBJECT_ATTRIBUTES_INIT(&attributes);
attributes.ParentObject = device;
status = WdfCollectionCreate(&attributes,
&fdoContext->RequestCollection);
if (!NT_SUCCESS(status))
{
TraceEvents(TRACE_LEVEL_ERROR, TRACE_DEVICE,
__FUNCTION__": WdfCollectionCreate failed\n");
return status;
};
//
// The FDO is the USB Controller, create a device interface for that.
//
status = WdfDeviceCreateDeviceInterface(
device,
&GUID_DEVINTERFACE_USB_HOST_CONTROLLER,
NULL);
if (!NT_SUCCESS(status))
{
TraceEvents(TRACE_LEVEL_ERROR, TRACE_DEVICE,
__FUNCTION__": WdfDeviceCreateDeviceInterface for device %p error %x\n",
device,
status);
return status;
}
WDF_OBJECT_ATTRIBUTES_INIT(&attributes);
attributes.ParentObject = device;
status = WdfStringCreate(NULL, &attributes, &fdoContext->hcdsymlink);
if (!NT_SUCCESS(status))
{
TraceEvents(TRACE_LEVEL_ERROR, TRACE_DEVICE,
__FUNCTION__": WdfStringCreate for device %p error %x\n",
device,
status);
return status;
}
status = WdfDeviceRetrieveDeviceInterfaceString(device,
&GUID_DEVINTERFACE_USB_HOST_CONTROLLER,
NULL,
fdoContext->hcdsymlink);
if (!NT_SUCCESS(status))
{
TraceEvents(TRACE_LEVEL_ERROR, TRACE_DEVICE,
__FUNCTION__": WdfStringCreate for device %p error %x\n",
device,
status);
return status;
}
//
// Some of our resources are independent of the device state and
// can be allocated/initialized here.
//
status = InitScratchpad(fdoContext);
if (!NT_SUCCESS(status))
{
return status;
}
//
// Initialize the I/O Package and any Queues
//
status = FdoQueueInitialize(device);
if (!NT_SUCCESS(status))
{
return status;
}
//
// --XT-- All of the WDF ISR and DPC setup code was removed
// here. The DPC is now setup through the Xen interface in the
// previous call. Note the event channel is setup but not active
// until the backend is connected.
//
//
// Allocate a watchdog timer for our Xen interface.
//
WDF_TIMER_CONFIG timerConfig;
WDF_OBJECT_ATTRIBUTES timerAttributes;
WDF_TIMER_CONFIG_INIT(
&timerConfig,
FdoEvtTimerFunc);
WDF_OBJECT_ATTRIBUTES_INIT(&timerAttributes);
timerAttributes.ParentObject = device;
timerAttributes.ExecutionLevel = WdfExecutionLevelPassive;
status = WdfTimerCreate(
&timerConfig,
&timerAttributes,
&fdoContext->WatchdogTimer);
if (!NT_SUCCESS(status))
{
TraceEvents(TRACE_LEVEL_ERROR, TRACE_DEVICE,
__FUNCTION__": WdfTimerCreate error %x\n",
status);
return status;
}
//
// Create a collection of work items.
//
WDF_OBJECT_ATTRIBUTES_INIT(&attributes);
attributes.ParentObject = device;
status = WdfCollectionCreate(&attributes,
&fdoContext->FreeWorkItems);
if (!NT_SUCCESS(status))
{
TraceEvents(TRACE_LEVEL_ERROR, TRACE_DEVICE,
__FUNCTION__": WdfCollectionCreate error %x\n",
status);
return status;
}
for (ULONG index = 0; index < INIT_WORK_ITEM_COUNT; index++)
{
WDFWORKITEM workitem = NewWorkItem(fdoContext,
NULL,
0,0,0,0);
if (workitem)
{
status = WdfCollectionAdd(fdoContext->FreeWorkItems, workitem);
if (!NT_SUCCESS(status))
{
TraceEvents(TRACE_LEVEL_ERROR, TRACE_DEVICE,
__FUNCTION__": WdfCollectionAdd for workitem index %d error %x\n",
index,
status);
WdfObjectDelete(workitem);
return status;
}
}
}
PNP_BUS_INFORMATION busInformation;
busInformation.BusNumber = 0;
busInformation.BusTypeGuid = GUID_BUS_TYPE_USB;
busInformation.LegacyBusType = PNPBus;
WdfDeviceSetBusInformationForChildren(
device,
&busInformation);
if (NT_SUCCESS(status)) {
status = LateSetup(device);
}
return status;
}
NTSTATUS
RamDiskEvtDeviceAdd(
IN WDFDRIVER Driver,
IN PWDFDEVICE_INIT DeviceInit
)
/*++
Routine Description:
EvtDeviceAdd is called by the framework in response to AddDevice
call from the PnP manager. We create and initialize a device object to
represent a new instance of the device.
Arguments:
Driver - Handle to a framework driver object created in DriverEntry
DeviceInit - Pointer to a framework-allocated WDFDEVICE_INIT structure.
Return Value:
NTSTATUS
--*/
{
WDF_OBJECT_ATTRIBUTES deviceAttributes;
NTSTATUS status;
WDFDEVICE device;
WDF_OBJECT_ATTRIBUTES queueAttributes;
WDF_IO_QUEUE_CONFIG ioQueueConfig;
PDEVICE_EXTENSION pDeviceExtension;
PQUEUE_EXTENSION pQueueContext = NULL;
WDFQUEUE queue;
DECLARE_CONST_UNICODE_STRING(ntDeviceName, NT_DEVICE_NAME);
PAGED_CODE();
UNREFERENCED_PARAMETER(Driver);
//
// Storage drivers have to name their FDOs. Since we are not unique'fying
// the device name, we wouldn't be able to install more than one instance
// of this ramdisk driver.
//
status = WdfDeviceInitAssignName(DeviceInit, &ntDeviceName);
if (!NT_SUCCESS(status)) {
return status;
}
WdfDeviceInitSetDeviceType(DeviceInit, FILE_DEVICE_DISK);
WdfDeviceInitSetIoType(DeviceInit, WdfDeviceIoDirect);
WdfDeviceInitSetExclusive(DeviceInit, FALSE);
//
// Since this is a pure software only driver, there is no need to register
// any PNP/Power event callbacks. Framework will respond to these
// events appropriately.
//
WDF_OBJECT_ATTRIBUTES_INIT_CONTEXT_TYPE(&deviceAttributes, DEVICE_EXTENSION);
deviceAttributes.EvtCleanupCallback = RamDiskEvtDeviceContextCleanup;
status = WdfDeviceCreate(&DeviceInit, &deviceAttributes, &device);
if (!NT_SUCCESS(status)) {
return status;
}
//
// Now that the WDF device object has been created, set up any context
// that it requires.
//
pDeviceExtension = DeviceGetExtension(device);
//
// Configure a default queue so that requests that are not
// configure-fowarded using WdfDeviceConfigureRequestDispatching to goto
// other queues get dispatched here.
//
WDF_IO_QUEUE_CONFIG_INIT_DEFAULT_QUEUE (
&ioQueueConfig,
WdfIoQueueDispatchSequential
);
ioQueueConfig.EvtIoDeviceControl = RamDiskEvtIoDeviceControl;
ioQueueConfig.EvtIoRead = RamDiskEvtIoRead;
ioQueueConfig.EvtIoWrite = RamDiskEvtIoWrite;
WDF_OBJECT_ATTRIBUTES_INIT_CONTEXT_TYPE(&queueAttributes, QUEUE_EXTENSION);
//
// By default, Static Driver Verifier (SDV) displays a warning if it
// doesn't find the EvtIoStop callback on a power-managed queue.
// The 'assume' below causes SDV to suppress this warning. If the driver
// has not explicitly set PowerManaged to WdfFalse, the framework creates
// power-managed queues when the device is not a filter driver. Normally
// the EvtIoStop is required for power-managed queues, but for this driver
// it is not needed b/c the driver doesn't hold on to the requests or
// forward them to other drivers. This driver completes the requests
// directly in the queue's handlers. If the EvtIoStop callback is not
// implemented, the framework waits for all driver-owned requests to be
// done before moving in the Dx/sleep states or before removing the
// device, which is the correct behavior for this type of driver.
// If the requests were taking an indeterminate amount of time to complete,
// or if the driver forwarded the requests to a lower driver/another stack,
// the queue should have an EvtIoStop/EvtIoResume.
//
__analysis_assume(ioQueueConfig.EvtIoStop != 0);
status = WdfIoQueueCreate( device,
&ioQueueConfig,
&queueAttributes,
&queue );
__analysis_assume(ioQueueConfig.EvtIoStop == 0);
if (!NT_SUCCESS(status)) {
return status;
}
// Context is the Queue handle
pQueueContext = QueueGetExtension(queue);
//
// Set the context for our default queue as our device extension.
//
pQueueContext->DeviceExtension = pDeviceExtension;
#if KMDF_VERSION_MINOR >= 9
//
// Enable forward progress on the queue we just created.
// NOTE: If you are planning to use this code without forward progress,
// comment out the call to SetForwardProgressOnQueue below.
//
status = SetForwardProgressOnQueue(queue);
if (!NT_SUCCESS(status)) {
return status;
}
#endif
//
// Now do any RAM-Disk specific initialization
//
pDeviceExtension->DiskRegInfo.DriveLetter.Buffer =
(PWSTR) &pDeviceExtension->DriveLetterBuffer;
pDeviceExtension->DiskRegInfo.DriveLetter.MaximumLength =
sizeof(pDeviceExtension->DriveLetterBuffer);
//
// Get the disk parameters from the registry
//
RamDiskQueryDiskRegParameters(
WdfDriverGetRegistryPath(WdfDeviceGetDriver(device)),
&pDeviceExtension->DiskRegInfo
);
//
// Allocate memory for the disk image.
//
pDeviceExtension->DiskImage = ExAllocatePoolWithTag(
NonPagedPool,
pDeviceExtension->DiskRegInfo.DiskSize,
RAMDISK_TAG
);
if (pDeviceExtension->DiskImage) {
UNICODE_STRING deviceName;
UNICODE_STRING win32Name;
RamDiskFormatDisk(pDeviceExtension);
status = STATUS_SUCCESS;
//
// Now try to create a symbolic link for the drive letter.
//
RtlInitUnicodeString(&win32Name, DOS_DEVICE_NAME);
RtlInitUnicodeString(&deviceName, NT_DEVICE_NAME);
pDeviceExtension->SymbolicLink.Buffer = (PWSTR)
&pDeviceExtension->DosDeviceNameBuffer;
pDeviceExtension->SymbolicLink.MaximumLength =
sizeof(pDeviceExtension->DosDeviceNameBuffer);
pDeviceExtension->SymbolicLink.Length = win32Name.Length;
RtlCopyUnicodeString(&pDeviceExtension->SymbolicLink, &win32Name);
RtlAppendUnicodeStringToString(&pDeviceExtension->SymbolicLink,
&pDeviceExtension->DiskRegInfo.DriveLetter);
status = WdfDeviceCreateSymbolicLink(device,
&pDeviceExtension->SymbolicLink);
}
return status;
}
NTSTATUS
vJoy_CreateRawPdo(
WDFDEVICE Device,
ULONG InstanceNo
)
/*++
Routine Description:
This routine creates and initialize a PDO.
Arguments:
Return Value:
NT Status code.
--*/
{
NTSTATUS status;
PWDFDEVICE_INIT pDeviceInit = NULL;
PRPDO_DEVICE_DATA pdoData = NULL;
WDFDEVICE hChild = NULL;
WDF_OBJECT_ATTRIBUTES pdoAttributes;
WDF_DEVICE_PNP_CAPABILITIES pnpCaps;
WDF_IO_QUEUE_CONFIG ioQueueConfig;
WDFQUEUE queue;
WDF_DEVICE_STATE deviceState;
PDEVICE_EXTENSION devExt;
DECLARE_CONST_UNICODE_STRING(deviceId,VJOY_RAW_DEVICE_ID );
//DECLARE_CONST_UNICODE_STRING(hardwareId,VJOY_HARDWARE_ID );
DECLARE_CONST_UNICODE_STRING(deviceLocation,L"vJoy Raw Device\0" );
DECLARE_UNICODE_STRING_SIZE(buffer, MAX_ID_LEN);
PDEVICE_OBJECT ChildDeviceObject;
PDEVICE_OBJECT ParentDeviceObject;
DECLARE_CONST_UNICODE_STRING(
SDDL_DEVOBJ_SYS_ALL_ADM_RWX_WORLD_R_RES_R,
L"D:P(A;;GA;;;SY)(A;;GRGWGX;;;BA)(A;;GR;;;WD)(A;;GR;;;RC)"
);
DECLARE_CONST_UNICODE_STRING(
SDDL_DEVOBJ_SYS_ALL_ADM_RWX_WORLD_RWX_RES_R,
L"D:P(A;;GA;;;SY)(A;;GRGWGX;;;BA)(A;;GRGWGX;;;WD)(A;;GR;;;RC)"
);
int iInterface;
WCHAR RefStr[20];
UNICODE_STRING RefStr2;
WDF_FILEOBJECT_CONFIG FileObjInit;
WDF_OBJECT_ATTRIBUTES FileObjAttributes;
WDF_OBJECT_ATTRIBUTES LockAttributes;
TraceEvents(TRACE_LEVEL_INFORMATION, DBG_INIT, "Entered vJoy_CreateRawPdo\n");
//
// Allocate a WDFDEVICE_INIT structure and set the properties
// so that we can create a device object for the child.
//
pDeviceInit = WdfPdoInitAllocate(Device);
if (pDeviceInit == NULL) {
status = STATUS_INSUFFICIENT_RESOURCES;
LogEventWithStatus(ERRLOG_RAW_DEV_FAILED ,L"WdfPdoInitAllocate", WdfDriverWdmGetDriverObject(WdfGetDriver()), status);
goto Cleanup;
}
//
// Mark the device RAW so that the child device can be started
// and accessed without requiring a function driver. Since we are
// creating a RAW PDO, we must provide a class guid.
//
status = WdfPdoInitAssignRawDevice(pDeviceInit, &GUID_DEVINTERFACE_VJOY);
if (!NT_SUCCESS(status)) {
LogEventWithStatus(ERRLOG_RAW_DEV_FAILED ,L"WdfPdoInitAssignRawDevice", WdfDriverWdmGetDriverObject(WdfGetDriver()), status);
goto Cleanup;
}
// TODO: Assign correct SDDL
////
status = WdfDeviceInitAssignSDDLString(pDeviceInit,
&SDDL_DEVOBJ_SYS_ALL_ADM_RWX_WORLD_RWX_RES_R);
if (!NT_SUCCESS(status)) {
LogEventWithStatus(ERRLOG_RAW_DEV_FAILED ,L"WdfDeviceInitAssignSDDLString", WdfDriverWdmGetDriverObject(WdfGetDriver()), status);
goto Cleanup;
}
//
// Assign DeviceID - This will be reported to IRP_MN_QUERY_ID/BusQueryDeviceID
//
status = WdfPdoInitAssignDeviceID(pDeviceInit, &deviceId);
if (!NT_SUCCESS(status)) {
LogEventWithStatus(ERRLOG_RAW_DEV_FAILED ,L"WdfPdoInitAssignDeviceID", WdfDriverWdmGetDriverObject(WdfGetDriver()), status);
goto Cleanup;
}
//
// We could be enumerating more than one children if the filter attaches
// to multiple instances of keyboard, so we must provide a
// BusQueryInstanceID. If we don't, system will throw CA bugcheck.
//
status = RtlUnicodeStringPrintf(&buffer, VJOY_DEVICE_INSTANCE, InstanceNo);
if (!NT_SUCCESS(status)) {
LogEventWithStatus(ERRLOG_RAW_DEV_FAILED ,L"RtlUnicodeStringPrintf (1)", WdfDriverWdmGetDriverObject(WdfGetDriver()), status);
goto Cleanup;
}
status = WdfPdoInitAssignInstanceID(pDeviceInit, &buffer);
if (!NT_SUCCESS(status)) {
LogEventWithStatus(ERRLOG_RAW_DEV_FAILED ,L"WdfPdoInitAssignInstanceID", WdfDriverWdmGetDriverObject(WdfGetDriver()), status);
goto Cleanup;
}
//
// Provide a description about the device. This text is usually read from
// the device. This text is displayed momentarily by the PnP manager while
// it's looking for a matching INF. If it finds one, it uses the Device
// Description from the INF file to display in the device manager.
// Since our device is raw device and we don't provide any hardware ID
// to match with an INF, this text will be displayed in the device manager.
//
status = RtlUnicodeStringPrintf(&buffer,VJOY_DEVICE_TEXT_409 ); // English - United States
if (!NT_SUCCESS(status)) {
LogEventWithStatus(ERRLOG_RAW_DEV_FAILED ,L"RtlUnicodeStringPrintf (2)", WdfDriverWdmGetDriverObject(WdfGetDriver()), status);
goto Cleanup;
}
//
// You can call WdfPdoInitAddDeviceText multiple times, adding device
// text for multiple locales. When the system displays the text, it
// chooses the text that matches the current locale, if available.
// Otherwise it will use the string for the default locale.
// The driver can specify the driver's default locale by calling
// WdfPdoInitSetDefaultLocale.
//
status = WdfPdoInitAddDeviceText(pDeviceInit,
&buffer,
&deviceLocation,
0x409 // English - United States
);
if (!NT_SUCCESS(status)) {
LogEventWithStatus(ERRLOG_RAW_DEV_FAILED ,L"WdfPdoInitAddDeviceText (1)", WdfDriverWdmGetDriverObject(WdfGetDriver()), status);
goto Cleanup;
}
#if 0
// Hebrew (No real ned - just for fun)
status = RtlUnicodeStringPrintf(&buffer,VJOY_DEVICE_TEXT_40D, InstanceNo ); // Hebrew
if (!NT_SUCCESS(status)) {
LogEventWithStatus(ERRLOG_RAW_DEV_FAILED ,L"RtlUnicodeStringPrintf (3)", WdfDriverWdmGetDriverObject(WdfGetDriver()), status);
goto Cleanup;
}
status = WdfPdoInitAddDeviceText(pDeviceInit,
&buffer,
&deviceLocation,
0x40D // Hebrew
);
if (!NT_SUCCESS(status)) {
LogEventWithStatus(ERRLOG_RAW_DEV_FAILED ,L"WdfPdoInitAddDeviceText (2)", WdfDriverWdmGetDriverObject(WdfGetDriver()), status);
goto Cleanup;
}
#endif // 0
WdfPdoInitSetDefaultLocale(pDeviceInit, 0x409); // English - United States
WdfDeviceInitSetExclusive(pDeviceInit, FALSE);
// Create a WDFFILEOBJECT
WDF_OBJECT_ATTRIBUTES_INIT(&FileObjAttributes);
WDF_OBJECT_ATTRIBUTES_SET_CONTEXT_TYPE(&FileObjAttributes, FILEOBJECT_EXTENSION);
WDF_FILEOBJECT_CONFIG_INIT(&FileObjInit, vJoy_EvtDeviceFileCreate, WDF_NO_EVENT_CALLBACK, vJoy_EvtFileCleanup);
WdfDeviceInitSetFileObjectConfig(pDeviceInit, &FileObjInit, &FileObjAttributes);
//
// Initialize the attributes to specify the size of PDO device extension.
// All the state information private to the PDO will be tracked here.
//
WDF_OBJECT_ATTRIBUTES_INIT_CONTEXT_TYPE(&pdoAttributes, RPDO_DEVICE_DATA);
pdoAttributes.EvtCleanupCallback = rawEvtCleanupCallback;
//
// Set up our queue to allow forwarding of requests to the parent
// This is done so that the cached data can be retrieved
//
//WdfPdoInitAllowForwardingRequestToParent(pDeviceInit);
// TODO: Replace the above because it is needed for WdfRequestForwardToParentDeviceIoQueue()
status = WdfDeviceCreate(&pDeviceInit, &pdoAttributes, &hChild);
if (!NT_SUCCESS(status)) {
LogEventWithStatus(ERRLOG_RAW_DEV_FAILED ,L"WdfDeviceCreate", WdfDriverWdmGetDriverObject(WdfGetDriver()), status);
goto Cleanup;
}
//
// Get the device context.
//
pdoData = PdoGetData(hChild);
pdoData->InstanceNo = InstanceNo;
pdoData->hParentDevice = Device;
//
// Save the I/O target handle and adjust the I/O stack size:
//
devExt = GetDeviceContext(Device);
pdoData->IoTargetToParent = devExt->IoTargetToSelf;
ChildDeviceObject = WdfDeviceWdmGetDeviceObject(hChild);
ParentDeviceObject = WdfDeviceWdmGetDeviceObject(Device);
ChildDeviceObject->StackSize = ParentDeviceObject->StackSize+1;
// Create a wait-lock object that will be used to synch access to positions[i]
// The lock is created when the raw device is created so the raw device is set to be its parent
WDF_OBJECT_ATTRIBUTES_INIT(&LockAttributes);
LockAttributes.ParentObject = hChild;
status = WdfWaitLockCreate(&LockAttributes, &(devExt->positionLock));
if (!NT_SUCCESS(status)) {
TraceEvents(TRACE_LEVEL_ERROR, DBG_INIT, "WdfWaitLockCreate failed 0x%x\n", status);
LogEventWithStatus(ERRLOG_RAW_DEV_FAILED ,L"WdfWaitLockCreate", WdfDriverWdmGetDriverObject(WdfGetDriver()), status);
goto Cleanup;
}
//
// Configure the default queue associated with the control device object
// to be Serial so that request passed to EvtIoDeviceControl are serialized.
// A default queue gets all the requests that are not
// configure-fowarded using WdfDeviceConfigureRequestDispatching.
//
WDF_IO_QUEUE_CONFIG_INIT_DEFAULT_QUEUE(&ioQueueConfig,
WdfIoQueueDispatchSequential);
ioQueueConfig.EvtIoDeviceControl = vJoy_EvtIoDeviceControlForRawPdo;
status = WdfIoQueueCreate(hChild,
&ioQueueConfig,
WDF_NO_OBJECT_ATTRIBUTES,
&queue // pointer to default queue
);
if (!NT_SUCCESS(status)) {
TraceEvents(TRACE_LEVEL_ERROR, DBG_INIT, "WdfIoQueueCreate failed 0x%x\n", status);
LogEventWithStatus(ERRLOG_RAW_DEV_FAILED ,L"WdfIoQueueCreate", WdfDriverWdmGetDriverObject(WdfGetDriver()), status);
goto Cleanup;
}
//
// Set some properties for the child device.
//
WDF_DEVICE_PNP_CAPABILITIES_INIT(&pnpCaps);
pnpCaps.Removable = WdfTrue; // Remove Icon from " Devices and Printers"
pnpCaps.SurpriseRemovalOK = WdfTrue;
pnpCaps.NoDisplayInUI = WdfTrue;
// pnpCaps.Address = InstanceNo;
pnpCaps.UINumber = 0;
WdfDeviceSetPnpCapabilities(hChild, &pnpCaps);
//
// TODO: In addition to setting NoDisplayInUI in DeviceCaps, we
// have to do the following to hide the device. Following call
// tells the framework to report the device state in
// IRP_MN_QUERY_DEVICE_STATE request.
//
WDF_DEVICE_STATE_INIT(&deviceState);
deviceState.DontDisplayInUI = WdfTrue; // Remove Icon from Device manager
WdfDeviceSetDeviceState(hChild, &deviceState);
//
// Create 16 interfaces
//
for (iInterface=1 ; iInterface <= MAX_N_DEVICES; iInterface++)
{
RtlStringCchPrintfW((NTSTRSAFE_PWSTR)RefStr, 20, VJOY_INTERFACE L"%03d", iInterface);
RtlInitUnicodeString(&RefStr2, (PCWSTR)RefStr);
status = WdfDeviceCreateDeviceInterface(hChild,&GUID_DEVINTERFACE_VJOY,&RefStr2);
if (!NT_SUCCESS (status)) {
TraceEvents(TRACE_LEVEL_ERROR, DBG_INIT, "WdfDeviceCreateDeviceInterface number %d failed 0x%x\n", iInterface, status);
LogEventWithStatus(ERRLOG_RAW_DEV_FAILED ,L"WdfDeviceCreateDeviceInterface", WdfDriverWdmGetDriverObject(WdfGetDriver()), status);
goto Cleanup;
}
};
// Mark all interfaces as unused
pdoData->UsedInterfacesMask=0;
//
// Add this device to the FDO's collection of children.
// After the child device is added to the static collection successfully,
// driver must call WdfPdoMarkMissing to get the device deleted. It
// shouldn't delete the child device directly by calling WdfObjectDelete.
//
status = WdfFdoAddStaticChild(Device, hChild);
if (!NT_SUCCESS(status)) {
LogEventWithStatus(ERRLOG_RAW_DEV_FAILED ,L"WdfFdoAddStaticChild", WdfDriverWdmGetDriverObject(WdfGetDriver()), status);
goto Cleanup;
}
return STATUS_SUCCESS;
Cleanup:
TraceEvents(TRACE_LEVEL_ERROR, DBG_INIT, "KbFiltr_CreatePdo failed %x\n", status);
//
// Call WdfDeviceInitFree if you encounter an error while initializing
// a new framework device object. If you call WdfDeviceInitFree,
// do not call WdfDeviceCreate.
//
if (pDeviceInit != NULL) {
WdfDeviceInitFree(pDeviceInit);
}
if(hChild) {
WdfObjectDelete(hChild);
}
return status;
}
// 添加设备回调
NTSTATUS EvtDriverDeviceAdd( IN WDFDRIVER Driver,
IN PWDFDEVICE_INIT DeviceInit )
{
NTSTATUS status;
WDFDEVICE device; // 设备对象
WDF_IO_QUEUE_CONFIG ioQueueConfig;
WDF_FILEOBJECT_CONFIG fileConfig;
PAGED_CODE();
// 互斥访问，同时刻只能一个应用程序与设备通信
WdfDeviceInitSetExclusive(DeviceInit, TRUE);
// 缓冲IO方式
WdfDeviceInitSetIoType(DeviceInit, WdfDeviceIoBuffered);
// 初始化文件对象
WDF_FILEOBJECT_CONFIG_INIT(&fileConfig, EvtDeviceFileCreate,
EvtFileClose, WDF_NO_EVENT_CALLBACK);
WdfDeviceInitSetFileObjectConfig(DeviceInit, &fileConfig, WDF_NO_OBJECT_ATTRIBUTES);
// 创建设备
status = WdfDeviceCreate(&DeviceInit, WDF_NO_OBJECT_ATTRIBUTES, &device);
if( !NT_SUCCESS(status) )
{
KdPrint(("[EvtDriverDeviceAdd] WdfDeviceCreate failed!"));
return status;
}
//使用缺省队列，设置I/O请求分发处理方式为串行
WDF_IO_QUEUE_CONFIG_INIT_DEFAULT_QUEUE(&ioQueueConfig, WdfIoQueueDispatchSequential);
// 设置EvtIoRead回调例程
ioQueueConfig.EvtIoRead = EvtIoRead;
// 设置EvtIoWrite回调例程
ioQueueConfig.EvtIoWrite = EvtIoWrite;
//设置EvtIoDeviceControl回调例程
ioQueueConfig.EvtIoDeviceControl = EvtIoDeviceControl;
// 创建队列
status = WdfIoQueueCreate(device, &ioQueueConfig, WDF_NO_OBJECT_ATTRIBUTES, WDF_NO_HANDLE);
if( !NT_SUCCESS(status) )
{
KdPrint(("[EvtDriverDeviceAdd] WdfIoQueueCreate failed!"));
return status;
}
// 创建设备接口
status = WdfDeviceCreateDeviceInterface(device,(LPGUID)&IOSample_DEVINTERFACE_GUID ,NULL);
if( !NT_SUCCESS(status) )
{
KdPrint(("[EvtDriverDeviceAdd] WdfDeviceCreateDeviceInterface failed!"));
}
return status;
}
NTSTATUS
FilterCreateControlDevice(
WDFDEVICE Device
)
/*++
Routine Description:
This routine is called to create a control deviceobject so that application
can talk to the filter driver directly instead of going through the entire
device stack. This kind of control device object is useful if the filter
driver is underneath another driver which prevents ioctls not known to it
or if the driver's dispatch routine is owned by some other (port/class)
driver and it doesn't allow any custom ioctls.
NOTE: Since the control device is global to the driver and accessible to
all instances of the device this filter is attached to, we create only once
when the first instance of the device is started and delete it when the
last instance gets removed.
Arguments:
Device - Handle to a filter device object.
Return Value:
WDF status code
--*/
{
PWDFDEVICE_INIT pInit = NULL;
WDFDEVICE controlDevice = NULL;
WDF_OBJECT_ATTRIBUTES controlAttributes;
WDF_IO_QUEUE_CONFIG ioQueueConfig;
BOOLEAN bCreate = FALSE;
NTSTATUS status;
WDFQUEUE queue;
DECLARE_CONST_UNICODE_STRING(ntDeviceName, NTDEVICE_NAME_STRING) ;
DECLARE_CONST_UNICODE_STRING(symbolicLinkName, SYMBOLIC_NAME_STRING) ;
PAGED_CODE();
//
// First find out whether any ControlDevice has been created. If the
// collection has more than one device then we know somebody has already
// created or in the process of creating the device.
//
WdfWaitLockAcquire(FilterDeviceCollectionLock, NULL);
if(WdfCollectionGetCount(FilterDeviceCollection) == 1) {
bCreate = TRUE;
}
WdfWaitLockRelease(FilterDeviceCollectionLock);
if(!bCreate) {
//
// Control device is already created. So return success.
//
return STATUS_SUCCESS;
}
KdPrint(("Creating Control Device\n"));
//
//
// In order to create a control device, we first need to allocate a
// WDFDEVICE_INIT structure and set all properties.
//
pInit = WdfControlDeviceInitAllocate(
WdfDeviceGetDriver(Device),
&SDDL_DEVOBJ_SYS_ALL_ADM_RWX_WORLD_RW_RES_R
);
if (pInit == NULL) {
status = STATUS_INSUFFICIENT_RESOURCES;
goto Error;
}
//
// Set exclusive to false so that more than one app can talk to the
// control device simultaneously.
//
WdfDeviceInitSetExclusive(pInit, FALSE);
status = WdfDeviceInitAssignName(pInit, &ntDeviceName);
if (!NT_SUCCESS(status)) {
goto Error;
}
//
// Specify the size of device context
//
WDF_OBJECT_ATTRIBUTES_INIT_CONTEXT_TYPE(&controlAttributes,
CONTROL_DEVICE_EXTENSION);
status = WdfDeviceCreate(&pInit,
&controlAttributes,
&controlDevice);
if (!NT_SUCCESS(status)) {
goto Error;
}
//
// Create a symbolic link for the control object so that usermode can open
// the device.
//
status = WdfDeviceCreateSymbolicLink(controlDevice,
&symbolicLinkName);
if (!NT_SUCCESS(status)) {
goto Error;
}
//
// Configure the default queue associated with the control device object
// to be Serial so that request passed to EvtIoDeviceControl are serialized.
//
WDF_IO_QUEUE_CONFIG_INIT_DEFAULT_QUEUE(&ioQueueConfig,
WdfIoQueueDispatchSequential);
ioQueueConfig.EvtIoDeviceControl = FilterEvtIoDeviceControl;
//
// Framework by default creates non-power managed queues for
// filter drivers.
//
status = WdfIoQueueCreate(controlDevice,
&ioQueueConfig,
WDF_NO_OBJECT_ATTRIBUTES,
&queue // pointer to default queue
);
if (!NT_SUCCESS(status)) {
goto Error;
}
//
// Control devices must notify WDF when they are done initializing. I/O is
// rejected until this call is made.
//
WdfControlFinishInitializing(controlDevice);
ControlDevice = controlDevice;
return STATUS_SUCCESS;
Error:
if (pInit != NULL) {
WdfDeviceInitFree(pInit);
}
if (controlDevice != NULL) {
//
// Release the reference on the newly created object, since
// we couldn't initialize it.
//
WdfObjectDelete(controlDevice);
controlDevice = NULL;
}
return status;
}
_Use_decl_annotations_
NTSTATUS
OnDeviceAdd(
WDFDRIVER Driver,
PWDFDEVICE_INIT DeviceInit
)
/*++
Routine Description:
OnDeviceAdd is called by the framework in response to AddDevice
call from the PnP manager. We create and initialize a device object to
represent a new instance of the device.
Arguments:
Driver - Handle to a framework driver object created in DriverEntry
DeviceInit - Pointer to a framework-allocated WDFDEVICE_INIT structure
Return Value:
Status
--*/
{
PAGED_CODE();
UNREFERENCED_PARAMETER(Driver);
WDF_PNPPOWER_EVENT_CALLBACKS pnpPowerCallbacks;
WDF_OBJECT_ATTRIBUTES objectAttributes;
PDEVICE_CONTEXT deviceContext;
WDFDEVICE device;
NTSTATUS status;
DECLARE_UNICODE_STRING_SIZE(symbolicLinkName, 128);
//
// Set PnP callbacks.
//
WDF_PNPPOWER_EVENT_CALLBACKS_INIT(&pnpPowerCallbacks);
pnpPowerCallbacks.EvtDevicePrepareHardware = PrepareHardware;
pnpPowerCallbacks.EvtDeviceReleaseHardware = ReleaseHardware;
WdfDeviceInitSetPnpPowerEventCallbacks(DeviceInit, &pnpPowerCallbacks);
//
// PWM only allows exclusive access.
//
WdfDeviceInitSetExclusive(DeviceInit, TRUE);
//
// Create device object.
//
WDF_OBJECT_ATTRIBUTES_INIT_CONTEXT_TYPE(&objectAttributes, DEVICE_CONTEXT);
objectAttributes.EvtCleanupCallback = OnDeviceContextCleanup;
status = WdfDeviceCreate(&DeviceInit, &objectAttributes, &device);
if (!NT_SUCCESS(status))
{
TraceEvents(TRACE_LEVEL_ERROR, TRACE_INIT, "Can not create device (0x%08x)", status);
goto Exit;
}
deviceContext = GetContext(device);
//
// Prepare config spin lock.
//
WDF_OBJECT_ATTRIBUTES_INIT(&objectAttributes);
status = WdfSpinLockCreate(&objectAttributes, &deviceContext->pwmLock);
if (!NT_SUCCESS(status))
{
TraceEvents(TRACE_LEVEL_ERROR, TRACE_INIT, "Can not create config spin lock (0x%08x)", status);
goto Exit;
}
//
// Prepare notification list spin lock.
//
WDF_OBJECT_ATTRIBUTES_INIT(&objectAttributes);
status = WdfSpinLockCreate(&objectAttributes, &deviceContext->notificationListLock);
if (!NT_SUCCESS(status))
{
TraceEvents(TRACE_LEVEL_ERROR, TRACE_INIT, "Can not create notification list spin lock (0x%08x)", status);
goto Exit;
}
//
// Prepare interrupt object.
//
WDF_INTERRUPT_CONFIG interruptConfig;
WDF_INTERRUPT_CONFIG_INIT(
&interruptConfig,
DmaIsr,
DmaDpc
);
status = WdfInterruptCreate(
device,
&interruptConfig,
WDF_NO_OBJECT_ATTRIBUTES,
&deviceContext->interruptObj
);
if (!NT_SUCCESS(status))
{
TraceEvents(TRACE_LEVEL_ERROR, TRACE_INIT, "Can not create interrupt object (0x%08x)", status);
goto Exit;
}
//
// Create queues to handle IO.
//
WDF_IO_QUEUE_CONFIG queueConfig;
WDF_IO_QUEUE_CONFIG_INIT_DEFAULT_QUEUE(
&queueConfig,
WdfIoQueueDispatchParallel);
queueConfig.EvtIoDeviceControl = OnIoDeviceControl;
queueConfig.PowerManaged = WdfFalse;
status = WdfIoQueueCreate(
device,
&queueConfig,
WDF_NO_OBJECT_ATTRIBUTES,
&deviceContext->queueObj
);
if (!NT_SUCCESS(status))
{
TraceEvents(TRACE_LEVEL_ERROR, TRACE_INIT, "Can not create IO queue (0x%08x)", status);
goto Exit;
}
//
// Create a symbolic link.
//
status = RtlUnicodeStringInit(&symbolicLinkName, BCM_PWM_SYMBOLIC_NAME);
if (!NT_SUCCESS(status))
{
TraceEvents(TRACE_LEVEL_ERROR, TRACE_INIT, "Can not process the symbolic name (0x%08x)", status);
goto Exit;
}
status = WdfDeviceCreateSymbolicLink(
device,
&symbolicLinkName
);
if (!NT_SUCCESS(status))
{
TraceEvents(TRACE_LEVEL_ERROR, TRACE_INIT, "Can not create a symbolic name (0x%08x)", status);
goto Exit;
}
Exit:
return status;
}
// 添加设备
NTSTATUS RamDiskEvtDeviceAdd(IN WDFDRIVER Driver,IN PWDFDEVICE_INIT DeviceInit)
{
WDF_OBJECT_ATTRIBUTES deviceAttributes;
NTSTATUS status;
WDFDEVICE device;
WDF_OBJECT_ATTRIBUTES queueAttributes;
WDF_IO_QUEUE_CONFIG ioQueueConfig;
PDEVICE_EXTENSION pDeviceExtension;
PQUEUE_EXTENSION pQueueContext = NULL;
WDFQUEUE queue;
//设备名
DECLARE_CONST_UNICODE_STRING(ntDeviceName, NT_DEVICE_NAME);
PAGED_CODE();
UNREFERENCED_PARAMETER(Driver);
//检查指定名称状态
status = WdfDeviceInitAssignName(DeviceInit, &ntDeviceName);
if (!NT_SUCCESS(status))
{
return status;
}
//指定设备类型
WdfDeviceInitSetDeviceType(DeviceInit, FILE_DEVICE_DISK);
//IO类型
WdfDeviceInitSetIoType(DeviceInit, WdfDeviceIoDirect);
//是否独占
WdfDeviceInitSetExclusive(DeviceInit, FALSE);
//初始化
WDF_OBJECT_ATTRIBUTES_INIT_CONTEXT_TYPE(&deviceAttributes, DEVICE_EXTENSION);
//设定cleanup 函数指针
deviceAttributes.EvtCleanupCallback = RamDiskEvtDeviceContextCleanup;
//获取创建设备状态
status = WdfDeviceCreate(&DeviceInit, &deviceAttributes, &device);
if (!NT_SUCCESS(status))
{
return status;
}
pDeviceExtension = DeviceGetExtension(device);
//
// Configure a default queue so that requests that are not
// configure-fowarded using WdfDeviceConfigureRequestDispatching to goto
// other queues get dispatched here.
//
WDF_IO_QUEUE_CONFIG_INIT_DEFAULT_QUEUE (&ioQueueConfig,WdfIoQueueDispatchSequential);
ioQueueConfig.EvtIoDeviceControl = RamDiskEvtIoDeviceControl;
ioQueueConfig.EvtIoRead = RamDiskEvtIoRead;
ioQueueConfig.EvtIoWrite = RamDiskEvtIoWrite;
WDF_OBJECT_ATTRIBUTES_INIT_CONTEXT_TYPE(&queueAttributes, QUEUE_EXTENSION);
status = WdfIoQueueCreate( device,&ioQueueConfig,&queueAttributes,&queue );
if (!NT_SUCCESS(status))
{
return status;
}
//获得设备扩展
pQueueContext = QueueGetExtension(queue);
//设置队列的设备扩展为该设备
pQueueContext->DeviceExtension = pDeviceExtension;
status = SetForwardProgressOnQueue(queue);
if (!NT_SUCCESS(status))
{
return status;
}
//设备初始化
pDeviceExtension->DiskRegInfo.DriveLetter.Buffer = (PWSTR) &pDeviceExtension->DriveLetterBuffer;
pDeviceExtension->DiskRegInfo.DriveLetter.MaximumLength = sizeof(pDeviceExtension->DriveLetterBuffer);
//从注册表获取信息
RamDiskQueryDiskRegParameters(WdfDriverGetRegistryPath(WdfDeviceGetDriver(device)),&pDeviceExtension->DiskRegInfo);
//内存分配 要使用分页内存
pDeviceExtension->DiskImage = ExAllocatePoolWithTag(PagedPool,pDeviceExtension->DiskRegInfo.DiskSize,RAMDISK_TAG);
if (pDeviceExtension->DiskImage)
{
//成功分配
UNICODE_STRING deviceName;
UNICODE_STRING win32Name;
RamDiskFormatDisk(pDeviceExtension);
//格式化
status = STATUS_SUCCESS;
//创建符号链接
RtlInitUnicodeString(&win32Name, DOS_DEVICE_NAME);
RtlInitUnicodeString(&deviceName, NT_DEVICE_NAME);
//符号链接初始化
pDeviceExtension->SymbolicLink.Buffer = (PWSTR)&pDeviceExtension->DosDeviceNameBuffer;
pDeviceExtension->SymbolicLink.MaximumLength = sizeof(pDeviceExtension->DosDeviceNameBuffer);
pDeviceExtension->SymbolicLink.Length = win32Name.Length;
RtlCopyUnicodeString(&pDeviceExtension->SymbolicLink, &win32Name);
RtlAppendUnicodeStringToString(&pDeviceExtension->SymbolicLink,&pDeviceExtension->DiskRegInfo.DriveLetter);
//创建符号链接
status = WdfDeviceCreateSymbolicLink(device,&pDeviceExtension->SymbolicLink);
}
return status;
}
NTSTATUS
Bus_EvtDeviceAdd(
IN WDFDRIVER Driver,
IN PWDFDEVICE_INIT DeviceInit
)
/*++
Routine Description:
Bus_EvtDeviceAdd is called by the framework in response to AddDevice
call from the PnP manager. We create and initialize a device object to
represent a new instance of toaster bus.
Arguments:
Driver - Handle to a framework driver object created in DriverEntry
DeviceInit - Pointer to a framework-allocated WDFDEVICE_INIT structure.
Return Value:
NTSTATUS
--*/
{
WDF_IO_QUEUE_CONFIG queueConfig;
WDF_OBJECT_ATTRIBUTES attributes;
NTSTATUS status;
WDFDEVICE device;
PFDO_DEVICE_DATA deviceData;
PNP_BUS_INFORMATION busInfo;
WDFQUEUE queue;
UNREFERENCED_PARAMETER(Driver);
PAGED_CODE ();
KdPrint(("Bus_EvtDeviceAdd: 0x%p\n", Driver));
//
// Initialize all the properties specific to the device.
// Framework has default values for the one that are not
// set explicitly here. So please read the doc and make sure
// you are okay with the defaults.
//
WdfDeviceInitSetDeviceType(DeviceInit, FILE_DEVICE_BUS_EXTENDER);
WdfDeviceInitSetExclusive(DeviceInit, TRUE);
//
// Initialize attributes structure to specify size and accessor function
// for storing device context.
//
WDF_OBJECT_ATTRIBUTES_INIT_CONTEXT_TYPE(&attributes, FDO_DEVICE_DATA);
//
// Create a framework device object. In response to this call, framework
// creates a WDM deviceobject.
//
status = WdfDeviceCreate(&DeviceInit, &attributes, &device);
if (!NT_SUCCESS(status)) {
return status;
}
//
// Get the device context.
//
deviceData = FdoGetData(device);
WDF_OBJECT_ATTRIBUTES_INIT(&attributes);
attributes.ParentObject = device;
//
// Purpose of this lock is documented in Bus_PlugInDevice routine below.
//
status = WdfWaitLockCreate(&attributes, &deviceData->ChildLock);
if (!NT_SUCCESS(status)) {
return status;
}
//
// Configure a default queue so that requests that are not
// configure-fowarded using WdfDeviceConfigureRequestDispatching to goto
// other queues get dispatched here.
//
WDF_IO_QUEUE_CONFIG_INIT_DEFAULT_QUEUE(
&queueConfig,
WdfIoQueueDispatchParallel
);
queueConfig.EvtIoDeviceControl = Bus_EvtIoDeviceControl;
//
// By default, Static Driver Verifier (SDV) displays a warning if it
// doesn't find the EvtIoStop callback on a power-managed queue.
// The 'assume' below causes SDV to suppress this warning. If the driver
// has not explicitly set PowerManaged to WdfFalse, the framework creates
// power-managed queues when the device is not a filter driver. Normally
// the EvtIoStop is required for power-managed queues, but for this driver
// it is not needed b/c the driver doesn't hold on to the requests or
// forward them to other drivers. This driver completes the requests
// directly in the queue's handlers. If the EvtIoStop callback is not
// implemented, the framework waits for all driver-owned requests to be
// done before moving in the Dx/sleep states or before removing the
// device, which is the correct behavior for this type of driver.
// If the requests were taking an indeterminate amount of time to complete,
// or if the driver forwarded the requests to a lower driver/another stack,
// the queue should have an EvtIoStop/EvtIoResume.
//
__analysis_assume(queueConfig.EvtIoStop != 0);
status = WdfIoQueueCreate(device,
&queueConfig,
WDF_NO_OBJECT_ATTRIBUTES,
&queue
);
__analysis_assume(queueConfig.EvtIoStop == 0);
if (!NT_SUCCESS(status)) {
KdPrint(("WdfIoQueueCreate failed with status 0x%x\n", status));
return status;
}
//
// Create device interface for this device. The interface will be
// enabled by the framework when we return from StartDevice successfully.
//
status = WdfDeviceCreateDeviceInterface(
device,
&GUID_DEVINTERFACE_BUSENUM_TOASTER,
NULL // No Reference String
);
if (!NT_SUCCESS(status)) {
return status;
}
//
// This value is used in responding to the IRP_MN_QUERY_BUS_INFORMATION
// for the child devices. This is an optional information provided to
// uniquely idenitfy the bus the device is connected.
//
busInfo.BusTypeGuid = GUID_DEVCLASS_TOASTER;
busInfo.LegacyBusType = PNPBus;
busInfo.BusNumber = 0;
WdfDeviceSetBusInformationForChildren(device, &busInfo);
status = Bus_WmiRegistration(device);
if (!NT_SUCCESS(status)) {
return status;
}
status = Bus_DoStaticEnumeration(device);
return status;
}
NTSTATUS
t1394_EvtDeviceAdd(
/*IN*/WDFDRIVER Driver,
/*IN*/PWDFDEVICE_INIT DeviceInit
)
/*++
Routine Description:
EvtDeviceAdd is called by the framework in response to AddDevice
call from the PnP manager.
Arguments:
Driver - Handle to a framework driver object created in DriverEntry
DeviceInit - Pointer to a framework-allocated WDFDEVICE_INIT structure.
Return Value:
NTSTATUS
--*/
{
NTSTATUS status = STATUS_SUCCESS;
PDEVICE_EXTENSION deviceExtension;
PNODE_DEVICE_EXTENSION pNodeExt;
WDF_PNPPOWER_EVENT_CALLBACKS pnpPowerCallbacks;
WDF_OBJECT_ATTRIBUTES fdoAttributes,lockAttributes;
WDFDEVICE device;
WDF_DEVICE_PNP_CAPABILITIES pnpCaps;
WDF_IO_QUEUE_CONFIG ioQueueConfig;
WDF_IO_TARGET_OPEN_PARAMS openParams;
//UNREFERENCED_PARAMETER(Driver);
//ENTER("t1394_PnpAddDevice");
//
// Zero out the PnpPowerCallbacks structure.
//
WDF_PNPPOWER_EVENT_CALLBACKS_INIT(&pnpPowerCallbacks);
//
// Set Callbacks for any of the functions we are interested in.
// If no callback is set, Framework will take the default action
// by itself.
//
// These two callbacks set up and tear down hardware state,
// specifically that which only has to be done once.
//
pnpPowerCallbacks.EvtDevicePrepareHardware = t1394_EvtPrepareHardware;
pnpPowerCallbacks.EvtDeviceReleaseHardware = t1394_EvtReleaseHardware;
pnpPowerCallbacks.EvtDeviceSelfManagedIoCleanup =
t1394_EvtDeviceSelfManagedIoCleanup;
pnpPowerCallbacks.EvtDeviceD0Entry = t1394_EvtDeviceD0Entry;
pnpPowerCallbacks.EvtDeviceD0Exit = t1394_EvtDeviceD0Exit;
//
// Register the PnP and power callbacks. Power policy related callbacks
// will be registered// later in SotwareInit.
//
WdfDeviceInitSetPnpPowerEventCallbacks(DeviceInit, &pnpPowerCallbacks);
if ( !NT_SUCCESS(status)) {
//TRACE(TL_ERROR, ("WdfDeviceInitSetPnpPowerEventCallbacks failed %x\n",
// status));
return status;
}
WdfDeviceInitSetExclusive(DeviceInit, FALSE);
//
// Specify the size and type of device context.
//
WDF_OBJECT_ATTRIBUTES_INIT_CONTEXT_TYPE(&fdoAttributes, DEVICE_EXTENSION);
status = WdfDeviceCreate(&DeviceInit, &fdoAttributes, &device);
if ( !NT_SUCCESS(status)) {
//TRACE(TL_ERROR, ("WdfDeviceInitialize failed %x\n", status));
return status;
}
deviceExtension = GetDeviceContext (device);
deviceExtension->WdfDevice = device;
//TRACE(TL_TRACE, ("PDO(0x%p) FDO(0x%p), Lower(0x%p) DevExt (0x%p)\n",
// WdfDeviceWdmGetPhysicalDevice (device),
// WdfDeviceWdmGetDeviceObject (device),
// WdfDeviceWdmGetAttachedDevice(device),
// deviceExtension));
//
// Tell the Framework that this device will need an interface so that
// application can interact with it.
//
status = WdfDeviceCreateDeviceInterface(
device,
#if defined(_1394VDEV_DRIVER_)
(LPGUID) &GUID_1394VDEV,
#else
(LPGUID) &GUID_1394DIAG,
#endif
NULL
);
if (!NT_SUCCESS (status)) {
//TRACE(TL_ERROR, ("WdfDeviceCreateDeviceInterface failed %x\n", status));
return status;
}
//
// Tell the framework to set the SurpriseRemovalOK in the DeviceCaps so
// that you don't get the popup in usermode (on Win2K) when you surprise
// remove the device.
//
WDF_DEVICE_PNP_CAPABILITIES_INIT(&pnpCaps);
pnpCaps.SurpriseRemovalOK = WdfTrue;
WdfDeviceSetPnpCapabilities(device, &pnpCaps);
// save the device object we created as our physical device object
deviceExtension->PhysicalDeviceObject =
WdfDeviceWdmGetPhysicalDevice (device);
if (deviceExtension->PhysicalDeviceObject == NULL) {
//TRACE(TL_ERROR, ("WdfDeviceWdmGetPhysicalDevice: NULL DeviceObject\n"));
return STATUS_UNSUCCESSFUL;
}
//
// This is our default IoTarget representing the deviceobject
// we are attached to.
//
deviceExtension->StackIoTarget = WdfDeviceGetIoTarget(device);
deviceExtension->StackDeviceObject = WdfDeviceWdmGetAttachedDevice(device);
if (deviceExtension->StackDeviceObject == NULL) {
//TRACE(TL_ERROR, ("WdfDeviceWdmGetAttachedDevice: NULL DeviceObject\n"));
return STATUS_UNSUCCESSFUL;
}
// Patch: this code is not in DDK 7600.16385.1 {
//
// Get the port device object from the passed in PhysicalDeviceObject
// created by the 1394 stack for us.
// Note: we can't use the top of the stack and get its device extension
// in case there is a filter driver between us and our PDO.
//
//pNodeExt = WdfDeviceWdmGetPhysicalDevice(device)->DeviceExtension;
//deviceExtension->PortDeviceObject = pNodeExt->PortDeviceObject;
// Patch: this code is not in DDK 7600.16385.1 }
//TRACE(TL_TRACE, ("PortDeviceObject = 0x%x\n",
// deviceExtension->PortDeviceObject));
//
// Create a automanaged queue for dispatching ioctl requests.
// All other requests are automatically failed by the framework.
// By creating an automanaged queue we don't have to worry about
// PNP/Power synchronization.
// A default queue gets all the requests that are not
// configure-fowarded using WdfDeviceConfigureRequestDispatching.
//
WDF_IO_QUEUE_CONFIG_INIT_DEFAULT_QUEUE(
&ioQueueConfig,
WdfIoQueueDispatchParallel
);
ioQueueConfig.EvtIoDeviceControl = t1394_EvtIoDeviceControl;
status = WdfIoQueueCreate(
deviceExtension->WdfDevice,
&ioQueueConfig,
WDF_NO_OBJECT_ATTRIBUTES,
&deviceExtension->IoctlQueue // queue handle
);
if (!NT_SUCCESS (status)) {
//TRACE(TL_ERROR, ("WdfIoQueueCreate failed 0x%x\n", status));
return status;
}
//
// Create an additional queue to hold bus reset requests.
//
WDF_IO_QUEUE_CONFIG_INIT(
&ioQueueConfig,
WdfIoQueueDispatchManual
);
status = WdfIoQueueCreate (
deviceExtension->WdfDevice,
&ioQueueConfig,
WDF_NO_OBJECT_ATTRIBUTES,
&deviceExtension->BusResetRequestsQueue
);
if(!NT_SUCCESS (status)){
//TRACE(TL_ERROR, ("Error Creating Reset Request Queue 0x%x\n",
// status));
return status;
}
//
// Create another IoTarget representing PortDeviceObject so that
// we can send async requests in rawmode directly to the port device.
//
WDF_IO_TARGET_OPEN_PARAMS_INIT_EXISTING_DEVICE(&openParams,
pNodeExt->PortDeviceObject);
status = WdfIoTargetCreate(device,
WDF_NO_OBJECT_ATTRIBUTES,
&deviceExtension->PortDeviceIoTarget);
if (!NT_SUCCESS (status)) {
//TRACE(TL_ERROR, ("WdfIoTargetCreate failed 0x%x\n", status));
return status;
}
status = WdfIoTargetOpen(deviceExtension->PortDeviceIoTarget, &openParams);
if (!NT_SUCCESS (status)) {
//TRACE(TL_ERROR, ("WdfIoTargetCreate failed 0x%x\n", status));
return status;
}
WDF_OBJECT_ATTRIBUTES_INIT(&lockAttributes);
lockAttributes.ParentObject = device;
// initialize the spinlock/list to store the bus reset irps...
status = WdfSpinLockCreate(&lockAttributes,&deviceExtension->CromSpinLock );
if(!NT_SUCCESS(status)){
//TRACE(TL_ERROR, ("WdfSpinLockCreate CromSpinLock "
// "failed 0x%x\n", status));
return status;
}
WDF_OBJECT_ATTRIBUTES_INIT(&lockAttributes);
lockAttributes.ParentObject = device;
status = WdfSpinLockCreate(&lockAttributes,
&deviceExtension->AsyncSpinLock );
if(!NT_SUCCESS(status)){
//TRACE(TL_ERROR, ("WdfSpinLockCreate AsyncSpinLock "
// "failed 0x%x\n", status));
return status;
}
WDF_OBJECT_ATTRIBUTES_INIT(&lockAttributes);
lockAttributes.ParentObject = device;
status = WdfSpinLockCreate(&lockAttributes,
&deviceExtension->IsochSpinLock );
if(!NT_SUCCESS(status)){
//TRACE(TL_ERROR, ("WdfSpinLockCreate IsochSpinLock "
// "failed 0x%x\n", status));
return status;
}
WDF_OBJECT_ATTRIBUTES_INIT(&lockAttributes);
lockAttributes.ParentObject = device;
status = WdfSpinLockCreate(&lockAttributes,
&deviceExtension->IsochResourceSpinLock );
if(!NT_SUCCESS(status)){
//TRACE(TL_ERROR, ("WdfSpinLockCreate IsochResourceSpinLock "
// "failed 0x%x\n", status));
return status;
}
InitializeListHead(&deviceExtension->CromData);
InitializeListHead(&deviceExtension->AsyncAddressData);
InitializeListHead(&deviceExtension->IsochDetachData);
InitializeListHead(&deviceExtension->IsochResourceData);
//EXIT("t1394_PnpAddDevice", status);
return(status);
} // t1394_PnpAddDevice
NTSTATUS
RamDiskEvtDeviceAdd(
IN WDFDRIVER Driver,
IN PWDFDEVICE_INIT DeviceInit
)
/*++
Routine Description:
EvtDeviceAdd is called by the framework in response to AddDevice
call from the PnP manager. We create and initialize a device object to
represent a new instance of the device.
Arguments:
Driver - Handle to a framework driver object created in DriverEntry
DeviceInit - Pointer to a framework-allocated WDFDEVICE_INIT structure.
Return Value:
NTSTATUS
--*/
{
WDF_OBJECT_ATTRIBUTES deviceAttributes;
NTSTATUS status;
WDFDEVICE device;
WDF_OBJECT_ATTRIBUTES queueAttributes;
WDF_IO_QUEUE_CONFIG ioQueueConfig;
PDEVICE_EXTENSION pDeviceExtension;
PQUEUE_EXTENSION pQueueContext = NULL;
WDFQUEUE queue;
DECLARE_CONST_UNICODE_STRING(ntDeviceName, NT_DEVICE_NAME);
PAGED_CODE();
UNREFERENCED_PARAMETER(Driver);
//
// Storage drivers have to name their FDOs. Since we are not unique'fying
// the device name, we wouldn't be able to install more than one instance
// of this ramdisk driver.
//
status = WdfDeviceInitAssignName(DeviceInit, &ntDeviceName);
if (!NT_SUCCESS(status)) {
return status;
}
WdfDeviceInitSetDeviceType(DeviceInit, FILE_DEVICE_DISK);
WdfDeviceInitSetIoType(DeviceInit, WdfDeviceIoDirect);
WdfDeviceInitSetExclusive(DeviceInit, FALSE);
//
// Since this is a pure software only driver, there is no need to register
// any PNP/Power event callbacks. Framework will respond to these
// events appropriately.
//
WDF_OBJECT_ATTRIBUTES_INIT_CONTEXT_TYPE(&deviceAttributes, DEVICE_EXTENSION);
deviceAttributes.EvtCleanupCallback = RamDiskEvtDeviceContextCleanup;
status = WdfDeviceCreate(&DeviceInit, &deviceAttributes, &device);
if (!NT_SUCCESS(status)) {
return status;
}
//
// Now that the WDF device object has been created, set up any context
// that it requires.
//
pDeviceExtension = DeviceGetExtension(device);
//
// Configure a default queue so that requests that are not
// configure-fowarded using WdfDeviceConfigureRequestDispatching to goto
// other queues get dispatched here.
//
WDF_IO_QUEUE_CONFIG_INIT_DEFAULT_QUEUE (
&ioQueueConfig,
WdfIoQueueDispatchSequential
);
ioQueueConfig.EvtIoDeviceControl = RamDiskEvtIoDeviceControl;
ioQueueConfig.EvtIoRead = RamDiskEvtIoRead;
ioQueueConfig.EvtIoWrite = RamDiskEvtIoWrite;
WDF_OBJECT_ATTRIBUTES_INIT_CONTEXT_TYPE(&queueAttributes, QUEUE_EXTENSION);
status = WdfIoQueueCreate( device,
&ioQueueConfig,
&queueAttributes,
&queue );
if (!NT_SUCCESS(status)) {
return status;
}
// Context is the Queue handle
pQueueContext = QueueGetExtension(queue);
//
// Set the context for our default queue as our device extension.
//
pQueueContext->DeviceExtension = pDeviceExtension;
//
// Enable forward progress on the queue we just created.
// NOTE: If you are planning to use this code without forward progress,
// comment out the call to SetForwardProgressOnQueue below.
//
status = SetForwardProgressOnQueue(queue);
if (!NT_SUCCESS(status)) {
return status;
}
//
// Now do any RAM-Disk specific initialization
//
pDeviceExtension->DiskRegInfo.DriveLetter.Buffer =
(PWSTR) &pDeviceExtension->DriveLetterBuffer;
pDeviceExtension->DiskRegInfo.DriveLetter.MaximumLength =
sizeof(pDeviceExtension->DriveLetterBuffer);
//
// Get the disk parameters from the registry
//
RamDiskQueryDiskRegParameters(
WdfDriverGetRegistryPath(WdfDeviceGetDriver(device)),
&pDeviceExtension->DiskRegInfo
);
//
// Allocate memory for the disk image.
//
pDeviceExtension->DiskImage = ExAllocatePoolWithTag(
NonPagedPool,
pDeviceExtension->DiskRegInfo.DiskSize,
RAMDISK_TAG
);
if (pDeviceExtension->DiskImage) {
UNICODE_STRING deviceName;
UNICODE_STRING win32Name;
RamDiskFormatDisk(pDeviceExtension);
status = STATUS_SUCCESS;
//
// Now try to create a symbolic link for the drive letter.
//
RtlInitUnicodeString(&win32Name, DOS_DEVICE_NAME);
RtlInitUnicodeString(&deviceName, NT_DEVICE_NAME);
pDeviceExtension->SymbolicLink.Buffer = (PWSTR)
&pDeviceExtension->DosDeviceNameBuffer;
pDeviceExtension->SymbolicLink.MaximumLength =
sizeof(pDeviceExtension->DosDeviceNameBuffer);
pDeviceExtension->SymbolicLink.Length = win32Name.Length;
RtlCopyUnicodeString(&pDeviceExtension->SymbolicLink, &win32Name);
RtlAppendUnicodeStringToString(&pDeviceExtension->SymbolicLink,
&pDeviceExtension->DiskRegInfo.DriveLetter);
status = WdfDeviceCreateSymbolicLink(device,
&pDeviceExtension->SymbolicLink);
}
return status;
}
