/**
* @brief Configures I2C Analog noise filter.
* @param hi2c: pointer to a I2C_HandleTypeDef structure that contains
* the configuration information for the specified I2Cx peripheral.
* @param AnalogFilter: new state of the Analog filter.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_I2CEx_ConfigAnalogFilter(I2C_HandleTypeDef *hi2c, uint32_t AnalogFilter)
{
/* Check the parameters */
assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance));
assert_param(IS_I2C_ANALOG_FILTER(AnalogFilter));
if(hi2c->State == HAL_I2C_STATE_READY)
{
hi2c->State = HAL_I2C_STATE_BUSY;
/* Disable the selected I2C peripheral */
__HAL_I2C_DISABLE(hi2c);
/* Reset I2Cx ANOFF bit */
hi2c->Instance->FLTR &= ~(I2C_FLTR_ANOFF);
/* Disable the analog filter */
hi2c->Instance->FLTR |= AnalogFilter;
__HAL_I2C_ENABLE(hi2c);
hi2c->State = HAL_I2C_STATE_READY;
return HAL_OK;
}
else
{
return HAL_BUSY;
}
}
/**
* @brief Disable I2C wakeup from stop mode.
* @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
* the configuration information for the specified I2Cx peripheral.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_I2CEx_DisableWakeUp (I2C_HandleTypeDef *hi2c)
{
/* Check the parameters */
assert_param(IS_I2C_WAKEUP_FROMSTOP_INSTANCE(hi2c->Instance));
if(hi2c->State == HAL_I2C_STATE_READY)
{
/* Process Locked */
__HAL_LOCK(hi2c);
hi2c->State = HAL_I2C_STATE_BUSY;
/* Disable the selected I2C peripheral */
__HAL_I2C_DISABLE(hi2c);
/* Enable wakeup from stop mode */
hi2c->Instance->CR1 &= ~(I2C_CR1_WUPEN);
__HAL_I2C_ENABLE(hi2c);
hi2c->State = HAL_I2C_STATE_READY;
/* Process Unlocked */
__HAL_UNLOCK(hi2c);
return HAL_OK;
}
else
{
return HAL_BUSY;
}
}
/**
* @brief Enables I2C wakeup from stop mode.
* @param hi2c : pointer to a I2C_HandleTypeDef structure that contains
* the configuration information for the specified I2Cx peripheral.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_I2CEx_EnableWakeUp (I2C_HandleTypeDef *hi2c)
{
/* Check the parameters */
assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance));
if((hi2c->State == HAL_I2C_STATE_BUSY) || (hi2c->State == HAL_I2C_STATE_MASTER_BUSY_TX) || (hi2c->State == HAL_I2C_STATE_MASTER_BUSY_RX)
|| (hi2c->State == HAL_I2C_STATE_SLAVE_BUSY_TX) || (hi2c->State == HAL_I2C_STATE_SLAVE_BUSY_RX))
{
return HAL_BUSY;
}
/* Process Locked */
__HAL_LOCK(hi2c);
hi2c->State = HAL_I2C_STATE_BUSY;
/* Disable the selected I2C peripheral */
__HAL_I2C_DISABLE(hi2c);
/* Enable wakeup from stop mode */
hi2c->Instance->CR1 |= I2C_CR1_WUPEN;
__HAL_I2C_ENABLE(hi2c);
hi2c->State = HAL_I2C_STATE_READY;
/* Process Unlocked */
__HAL_UNLOCK(hi2c);
return HAL_OK;
}
/**
* @brief Configures I2C Analog noise filter.
* @param hi2c : pointer to a I2C_HandleTypeDef structure that contains
* the configuration information for the specified I2Cx peripheral.
* @param AnalogFilter : new state of the Analog filter.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_I2CEx_ConfigAnalogFilter(I2C_HandleTypeDef *hi2c, uint32_t AnalogFilter)
{
/* Check the parameters */
assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance));
assert_param(IS_I2C_ANALOG_FILTER(AnalogFilter));
if((hi2c->State == HAL_I2C_STATE_BUSY) || (hi2c->State == HAL_I2C_STATE_MASTER_BUSY_TX) || (hi2c->State == HAL_I2C_STATE_MASTER_BUSY_RX)
|| (hi2c->State == HAL_I2C_STATE_SLAVE_BUSY_TX) || (hi2c->State == HAL_I2C_STATE_SLAVE_BUSY_RX))
{
return HAL_BUSY;
}
/* Process Locked */
__HAL_LOCK(hi2c);
hi2c->State = HAL_I2C_STATE_BUSY;
/* Disable the selected I2C peripheral */
__HAL_I2C_DISABLE(hi2c);
/* Reset I2Cx ANOFF bit */
hi2c->Instance->CR1 &= ~(I2C_CR1_ANFOFF);
/* Set analog filter bit*/
hi2c->Instance->CR1 |= AnalogFilter;
__HAL_I2C_ENABLE(hi2c);
hi2c->State = HAL_I2C_STATE_READY;
/* Process Unlocked */
__HAL_UNLOCK(hi2c);
return HAL_OK;
}
/**
* @brief Enables or disables the specified I2C software reset.
* @note When software reset is enabled, the I2C IOs are released (this can
* be useful to recover from bus errors).
* @param I2Cx: where x can be 1, 2 or 3 to select the I2C peripheral.
* @param NewState: new state of the I2C software reset.
* This parameter can be: ENABLE or DISABLE.
* @retval None
*/
void I2C_SoftwareResetCmd(I2C_HandleTypeDef *hi2c)
{
I2C_TypeDef* I2Cx = hi2c->Instance;
/* Check the parameters */
assert_param(IS_I2C_ALL_PERIPH(I2Cx));
assert_param(IS_FUNCTIONAL_STATE(NewState));
I2C_TypeDef _I2Cx;
_I2Cx.TIMINGR = I2Cx->TIMINGR;
_I2Cx.OAR2 = I2Cx->OAR2;
_I2Cx.OAR1 = I2Cx->OAR1;
_I2Cx.ICR = I2Cx->ICR;
_I2Cx.CR2 = I2Cx->CR2;
_I2Cx.CR1 = I2Cx->CR1;
/* Enable the selected I2C peripheral */
__HAL_I2C_DISABLE(hi2c);
/* Enable the selected I2C peripheral */
__HAL_I2C_ENABLE(hi2c);
I2Cx->CR1 = _I2Cx.CR1;
I2Cx->CR2 = _I2Cx.CR2;
I2Cx->ICR = _I2Cx.ICR;
I2Cx->OAR1 = _I2Cx.OAR1;
I2Cx->OAR2 = _I2Cx.OAR2;
I2Cx->TIMINGR = _I2Cx.TIMINGR;
}
/**
* @brief Configures I2C Digital noise filter.
* @param hi2c : pointer to a I2C_HandleTypeDef structure that contains
* the configuration information for the specified I2Cx peripheral.
* @param DigitalFilter : Coefficient of digital noise filter between 0x00 and 0x0F.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_I2CEx_DigitalFilter_Config(I2C_HandleTypeDef * hi2c,
uint32_t DigitalFilter)
{
uint32_t tmpreg = 0;
/* Check the parameters */
assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance));
assert_param(IS_I2C_DIGITAL_FILTER(DigitalFilter));
if ((hi2c->State == HAL_I2C_STATE_BUSY)
|| (hi2c->State == HAL_I2C_STATE_MASTER_BUSY_TX)
|| (hi2c->State == HAL_I2C_STATE_MASTER_BUSY_RX)
|| (hi2c->State == HAL_I2C_STATE_SLAVE_BUSY_TX)
|| (hi2c->State == HAL_I2C_STATE_SLAVE_BUSY_RX)) {
return HAL_BUSY;
}
/* Process Locked */
__HAL_LOCK(hi2c);
hi2c->State = HAL_I2C_STATE_BUSY;
/* Disable the selected I2C peripheral */
__HAL_I2C_DISABLE(hi2c);
/* Get the old register value */
tmpreg = hi2c->Instance->CR1;
/* Reset I2Cx DNF bits [11:8] */
tmpreg &= ~(I2C_CR1_DFN);
/* Set I2Cx DNF coefficient */
tmpreg |= DigitalFilter << 8;
/* Store the new register value */
hi2c->Instance->CR1 = tmpreg;
__HAL_I2C_ENABLE(hi2c);
hi2c->State = HAL_I2C_STATE_READY;
/* Process Unlocked */
__HAL_UNLOCK(hi2c);
return HAL_OK;
}
/**
* @brief Configures I2C Digital noise filter.
* @param hi2c: pointer to a I2C_HandleTypeDef structure that contains
* the configuration information for the specified I2Cx peripheral.
* @param DigitalFilter: Coefficient of digital noise filter between 0x00 and 0x0F.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_I2CEx_ConfigDigitalFilter(I2C_HandleTypeDef *hi2c, uint32_t DigitalFilter)
{
uint16_t tmpreg = 0;
/* Check the parameters */
assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance));
assert_param(IS_I2C_DIGITAL_FILTER(DigitalFilter));
if(hi2c->State == HAL_I2C_STATE_READY)
{
hi2c->State = HAL_I2C_STATE_BUSY;
/* Disable the selected I2C peripheral */
__HAL_I2C_DISABLE(hi2c);
/* Get the old register value */
tmpreg = hi2c->Instance->FLTR;
/* Reset I2Cx DNF bit [3:0] */
tmpreg &= ~(I2C_FLTR_DNF);
/* Set I2Cx DNF coefficient */
tmpreg |= DigitalFilter;
/* Store the new register value */
hi2c->Instance->FLTR = tmpreg;
__HAL_I2C_ENABLE(hi2c);
hi2c->State = HAL_I2C_STATE_READY;
return HAL_OK;
}
else
{
return HAL_BUSY;
}
}
