示例#1
0
static void sll_print_full(struct pkt_buff *pkt)
{
	struct sockaddr_ll *sll = pkt->sll;
	char addr_str[40] = {};

	tprintf(" [ Linux \"cooked\"");
	tprintf(" Pkt Type %d (%s)", sll->sll_pkttype,
		pkt_type2str(sll->sll_pkttype));
	tprintf(", If Type %d (%s)", sll->sll_hatype,
		device_type2str(sll->sll_hatype));
	tprintf(", Addr Len %d", sll->sll_halen);
	tprintf(", Src (%s)", device_addr2str(sll->sll_addr, sll->sll_halen,
		sll->sll_hatype, addr_str, sizeof(addr_str)));
	tprintf(", Proto 0x%x", ntohs(sll->sll_protocol));
	tprintf(" ]\n");

	switch (pcap_devtype_to_linktype(sll->sll_hatype)) {
	case LINKTYPE_EN10MB:
	case ___constant_swab32(LINKTYPE_EN10MB):
		pkt_set_dissector(pkt, &eth_lay2, ntohs(sll->sll_protocol));
		break;
	case LINKTYPE_NETLINK:
	case ___constant_swab32(LINKTYPE_NETLINK):
		pkt->dissector = &nlmsg_ops;
		break;
	default:
		tprintf(" [ Unknown protocol ]\n");
	}
}
示例#2
0
void dissector_entry_point(uint8_t *packet, size_t len, int linktype, int mode)
{
	struct protocol *proto_start, *proto_end;
	struct pkt_buff *pkt = NULL;

	if (mode == PRINT_NONE)
		return;

	pkt = pkt_alloc(packet, len);

	switch (linktype) {
	case LINKTYPE_EN10MB:
	case ___constant_swab32(LINKTYPE_EN10MB):
		proto_start = dissector_get_ethernet_entry_point();
		proto_end = dissector_get_ethernet_exit_point();
		break;
	case LINKTYPE_IEEE802_11:
	case ___constant_swab32(LINKTYPE_IEEE802_11):
		proto_start = dissector_get_ieee80211_entry_point();
		proto_end = dissector_get_ieee80211_exit_point();
		break;
	default:
		panic("Linktype not supported!\n");
	};

	dissector_main(pkt, proto_start, proto_end);

	switch (mode) {
	case PRINT_HEX:
		hex(pkt);
		break;
	case PRINT_ASCII:
		ascii(pkt);
		break;
	case PRINT_HEX_ASCII:
		hex_ascii(pkt);
		break;
	}

	tprintf_flush();
	pkt_free(pkt);
}
示例#3
0
int main(int argc, char **argv)
{
	char *ptr;
	int c, i, j, cpu_tmp, opt_index, ops_touched = 0, vals[4] = {0};
	bool prio_high = false, setsockmem = true;
	void (*main_loop)(struct ctx *ctx) = NULL;
	struct ctx ctx;

	init_ctx(&ctx);
	srand(time(NULL));

	while ((c = getopt_long(argc, argv, short_options, long_options,
				&opt_index)) != EOF) {
		switch (c) {
		case 'd':
		case 'i':
			ctx.device_in = xstrdup(optarg);
			break;
		case 'o':
			ctx.device_out = xstrdup(optarg);
			break;
		case 'P':
			ctx.prefix = xstrdup(optarg);
			break;
		case 'R':
			ctx.rfraw = 1;
			break;
		case 'r':
			ctx.randomize = true;
			break;
		case 'J':
			ctx.jumbo = true;
			break;
		case 'T':
			ctx.magic = (uint32_t) strtoul(optarg, NULL, 0);
			pcap_check_magic(ctx.magic);
			break;
		case 'f':
			ctx.filter = xstrdup(optarg);
			break;
		case 'M':
			ctx.promiscuous = false;
			break;
		case 'N':
			ctx.hwtimestamp = false;
			break;
		case 'A':
			setsockmem = false;
			break;
		case 'u':
			ctx.uid = strtoul(optarg, NULL, 0);
			ctx.enforce = true;
			break;
		case 'g':
			ctx.gid = strtoul(optarg, NULL, 0);
			ctx.enforce = true;
			break;
		case 'C':
			ctx.fanout_group = strtoul(optarg, NULL, 0);
			if (ctx.fanout_group == 0)
				panic("Non-zero fanout group id required!\n");
			break;
		case 'K':
			if (!strncmp(optarg, "hash", strlen("hash")))
				ctx.fanout_type = PACKET_FANOUT_HASH;
			else if (!strncmp(optarg, "lb", strlen("lb")) ||
				 !strncmp(optarg, "rr", strlen("rr")))
				ctx.fanout_type = PACKET_FANOUT_LB;
			else if (!strncmp(optarg, "cpu", strlen("cpu")))
				ctx.fanout_type = PACKET_FANOUT_CPU;
			else if (!strncmp(optarg, "rnd", strlen("rnd")))
				ctx.fanout_type = PACKET_FANOUT_RND;
			else if (!strncmp(optarg, "roll", strlen("roll")))
				ctx.fanout_type = PACKET_FANOUT_ROLLOVER;
			else if (!strncmp(optarg, "qm", strlen("qm")))
				ctx.fanout_type = PACKET_FANOUT_QM;
			else
				panic("Unknown fanout type!\n");
			break;
		case 'L':
			if (!strncmp(optarg, "defrag", strlen("defrag")))
				ctx.fanout_type |= PACKET_FANOUT_FLAG_DEFRAG;
			else if (!strncmp(optarg, "roll", strlen("roll")))
				ctx.fanout_type |= PACKET_FANOUT_FLAG_ROLLOVER;
			else
				panic("Unknown fanout option!\n");
			break;
		case 't':
			if (!strncmp(optarg, "host", strlen("host")))
				ctx.packet_type = PACKET_HOST;
			else if (!strncmp(optarg, "broadcast", strlen("broadcast")))
				ctx.packet_type = PACKET_BROADCAST;
			else if (!strncmp(optarg, "multicast", strlen("multicast")))
				ctx.packet_type = PACKET_MULTICAST;
			else if (!strncmp(optarg, "others", strlen("others")))
				ctx.packet_type = PACKET_OTHERHOST;
			else if (!strncmp(optarg, "outgoing", strlen("outgoing")))
				ctx.packet_type = PACKET_OUTGOING;
			else
				ctx.packet_type = -1;
			break;
		case 'S':
			ptr = optarg;
			for (j = i = strlen(optarg); i > 0; --i) {
				if (!isdigit(optarg[j - i]))
					break;
				ptr++;
			}

			if (!strncmp(ptr, "KiB", strlen("KiB")))
				ctx.reserve_size = 1 << 10;
			else if (!strncmp(ptr, "MiB", strlen("MiB")))
				ctx.reserve_size = 1 << 20;
			else if (!strncmp(ptr, "GiB", strlen("GiB")))
				ctx.reserve_size = 1 << 30;
			else
				panic("Syntax error in ring size param!\n");

			ctx.reserve_size *= strtoul(optarg, NULL, 0);
			break;
		case 'b':
			cpu_tmp = strtol(optarg, NULL, 0);

			cpu_affinity(cpu_tmp);
			if (ctx.cpu != -2)
				ctx.cpu = cpu_tmp;
			break;
		case 'H':
			prio_high = true;
			break;
		case 'c':
			ctx.pcap = PCAP_OPS_RW;
			ops_touched = 1;
			break;
		case 'm':
			ctx.pcap = PCAP_OPS_MM;
			ops_touched = 1;
			break;
		case 'G':
			ctx.pcap = PCAP_OPS_SG;
			ops_touched = 1;
			break;
		case 'Q':
			ctx.cpu = -2;
			break;
		case 's':
			ctx.print_mode = PRINT_NONE;
			break;
		case 'q':
			ctx.print_mode = PRINT_LESS;
			break;
		case 'X':
			ctx.print_mode =
				(ctx.print_mode == PRINT_ASCII) ?
				 PRINT_HEX_ASCII : PRINT_HEX;
			break;
		case 'l':
			ctx.print_mode =
				(ctx.print_mode == PRINT_HEX) ?
				 PRINT_HEX_ASCII : PRINT_ASCII;
			break;
		case 'k':
			ctx.kpull = strtoul(optarg, NULL, 0);
			break;
		case 'n':
			frame_count_max = strtoul(optarg, NULL, 0);
			break;
		case 'F':
			ptr = optarg;
			for (j = i = strlen(optarg); i > 0; --i) {
				if (!isdigit(optarg[j - i]))
					break;
				ptr++;
			}

			if (!strncmp(ptr, "KiB", strlen("KiB"))) {
				ctx.dump_interval = 1 << 10;
				ctx.dump_mode = DUMP_INTERVAL_SIZE;
			} else if (!strncmp(ptr, "MiB", strlen("MiB"))) {
				ctx.dump_interval = 1 << 20;
				ctx.dump_mode = DUMP_INTERVAL_SIZE;
			} else if (!strncmp(ptr, "GiB", strlen("GiB"))) {
				ctx.dump_interval = 1 << 30;
				ctx.dump_mode = DUMP_INTERVAL_SIZE;
			} else if (!strncmp(ptr, "sec", strlen("sec"))) {
				ctx.dump_interval = 1;
				ctx.dump_mode = DUMP_INTERVAL_TIME;
			} else if (!strncmp(ptr, "min", strlen("min"))) {
				ctx.dump_interval = 60;
				ctx.dump_mode = DUMP_INTERVAL_TIME;
			} else if (!strncmp(ptr, "hrs", strlen("hrs"))) {
				ctx.dump_interval = 60 * 60;
				ctx.dump_mode = DUMP_INTERVAL_TIME;
			} else if (!strncmp(ptr, "s", strlen("s"))) {
				ctx.dump_interval = 1;
				ctx.dump_mode = DUMP_INTERVAL_TIME;
			} else {
				panic("Syntax error in time/size param!\n");
			}

			ctx.dump_interval *= strtoul(optarg, NULL, 0);
			break;
		case 'V':
			ctx.verbose = true;
			break;
		case 'B':
			ctx.dump_bpf = true;
			break;
		case 'D':
			pcap_dump_type_features();
			die();
			break;
		case 'U':
			update_geoip();
			die();
			break;
		case 'w':
			ctx.link_type = LINKTYPE_LINUX_SLL;
			break;
		case 'v':
			version();
			break;
		case 'h':
			help();
			break;
		case '?':
			switch (optopt) {
			case 'd':
			case 'i':
			case 'o':
			case 'f':
			case 't':
			case 'P':
			case 'F':
			case 'n':
			case 'S':
			case 'b':
			case 'k':
			case 'T':
			case 'u':
			case 'g':
			case 'e':
				panic("Option -%c requires an argument!\n",
				      optopt);
			default:
				if (isprint(optopt))
					printf("Unknown option character `0x%X\'!\n", optopt);
				die();
			}
		default:
			break;
		}
	}

	if (!ctx.filter && optind != argc)
		ctx.filter = argv2str(optind, argc, argv);

	if (!ctx.device_in)
		ctx.device_in = xstrdup("any");

	register_signal(SIGINT, signal_handler);
	register_signal(SIGQUIT, signal_handler);
	register_signal(SIGTERM, signal_handler);
	register_signal(SIGHUP, signal_handler);

	tprintf_init();

	if (prio_high) {
		set_proc_prio(-20);
		set_sched_status(SCHED_FIFO, sched_get_priority_max(SCHED_FIFO));
	}

	if (device_mtu(ctx.device_in) || !strncmp("any", ctx.device_in, strlen(ctx.device_in))) {
		if (ctx.rfraw)
			setup_rfmon_mac80211_dev(&ctx, &ctx.device_in);

		if (!ctx.link_type)
			ctx.link_type = pcap_dev_to_linktype(ctx.device_in);
		if (link_has_sll_hdr(ctx.link_type)) {
			switch (ctx.magic) {
			case ORIGINAL_TCPDUMP_MAGIC:
				ctx.magic = ORIGINAL_TCPDUMP_MAGIC_LL;
				break;
			case NSEC_TCPDUMP_MAGIC:
				ctx.magic = NSEC_TCPDUMP_MAGIC_LL;
				break;
			case ___constant_swab32(ORIGINAL_TCPDUMP_MAGIC):
				ctx.magic = ___constant_swab32(ORIGINAL_TCPDUMP_MAGIC_LL);
				break;
			case ___constant_swab32(NSEC_TCPDUMP_MAGIC):
				ctx.magic = ___constant_swab32(NSEC_TCPDUMP_MAGIC_LL);
				break;
			}
		}


		if (!ctx.device_out) {
			ctx.dump = 0;
			main_loop = recv_only_or_dump;
		} else if (device_mtu(ctx.device_out)) {
			register_signal_f(SIGALRM, timer_elapsed, SA_SIGINFO);
			main_loop = receive_to_xmit;
		} else {
			ctx.dump = 1;
			register_signal_f(SIGALRM, timer_next_dump, SA_SIGINFO);
			main_loop = recv_only_or_dump;
			if (!ops_touched)
				ctx.pcap = PCAP_OPS_SG;
		}
	} else {
		if (ctx.device_out && device_mtu(ctx.device_out)) {
			register_signal_f(SIGALRM, timer_elapsed, SA_SIGINFO);
			main_loop = pcap_to_xmit;
			if (!ops_touched)
				ctx.pcap = PCAP_OPS_MM;
		} else {
			setsockmem = false;
			main_loop = read_pcap;
			if (!ops_touched)
				ctx.pcap = PCAP_OPS_SG;
		}
	}

	bug_on(!main_loop);

	init_geoip(0);
	if (setsockmem)
		set_system_socket_memory(vals, array_size(vals));
	if (!ctx.enforce)
		xlockme();

	if (ctx.verbose)
		printf("pcap file I/O method: %s\n", pcap_ops_group_to_str[ctx.pcap]);

	main_loop(&ctx);

	if (!ctx.enforce)
		xunlockme();
	if (setsockmem)
		reset_system_socket_memory(vals, array_size(vals));
	destroy_geoip();

	device_restore_irq_affinity_list();
	tprintf_cleanup();

	destroy_ctx(&ctx);
	return 0;
}
示例#4
0
unsigned int notrace __bswapsi2(unsigned int u)
{
	return ___constant_swab32(u);
}
/**
 * i2c_dw_init() - initialize the designware i2c master hardware
 * @dev: device private data
 *
 * This functions configures and enables the I2C master.
 * This function is called during I2C init function, and in case of timeout at
 * run time.
 */
int i2c_dw_init(struct dw_i2c_dev *dev)
{
	u32 input_clock_khz;
	u32 hcnt, lcnt;
	u32 reg;
	u32 cycle;

	input_clock_khz = dev->get_clk_rate_khz(dev);

	/* Configure register endianess access */
	reg = dw_readl(dev, DW_IC_COMP_TYPE);
	if (reg == ___constant_swab32(DW_IC_COMP_TYPE_VALUE)) {
		dev->swab = 1;
		reg = DW_IC_COMP_TYPE_VALUE;
	}

	if (reg != DW_IC_COMP_TYPE_VALUE) {
		dev_err(dev->dev, "Unknown Synopsys component type: "
			"0x%08x\n", reg);
		return -ENODEV;
	}

	/* Disable the adapter */
	dw_writel(dev, 0, DW_IC_ENABLE);

	/* set standard and fast speed deviders for high/low periods */

	/* Standard-mode */
	hcnt = i2c_dw_scl_hcnt(input_clock_khz,
				40,	/* tHD;STA = tHIGH = 4.0 us */
				8,	/* tf = 0.3 us */
				0,	/* 0: DW default, 1: Ideal */
				0);	/* No offset */
	lcnt = i2c_dw_scl_lcnt(input_clock_khz,
				47,	/* tLOW = 4.7 us */
				6,	/* tf = 0.3 us */
				0);	/* No offset */
	dw_writel(dev, hcnt, DW_IC_SS_SCL_HCNT);
	dw_writel(dev, lcnt, DW_IC_SS_SCL_LCNT);
	dev_dbg(dev->dev, "Standard-mode HCNT:LCNT = %d:%d\n", hcnt, lcnt);

	/* Fast-mode */
	hcnt = i2c_dw_scl_hcnt(input_clock_khz,
				6,	/* tHD;STA = tHIGH = 0.6 us */
				3,	/* tf = 0.3 us */
				0,	/* 0: DW default, 1: Ideal */
				0);	/* No offset */
	lcnt = i2c_dw_scl_lcnt(input_clock_khz,
				13,	/* tLOW = 1.3 us */
				3,	/* tf = 0.3 us */
				0);	/* No offset */
	dw_writel(dev, hcnt, DW_IC_FS_SCL_HCNT);
	dw_writel(dev, lcnt, DW_IC_FS_SCL_LCNT);
	dev_dbg(dev->dev, "Fast-mode HCNT:LCNT = %d:%d\n", hcnt, lcnt);

	/* Configure Tx/Rx FIFO threshold levels */
	dw_writel(dev, dev->tx_fifo_depth - 1, DW_IC_TX_TL);
	dw_writel(dev, 0, DW_IC_RX_TL);

	/* Calculate cycle time, the unit is ns */
	cycle = 1000000 / input_clock_khz;
	/* Set sda hold time as 200 ns */
	dw_writel(dev, 200/cycle, DW_IC_SDA_HOLD);

	/* configure the i2c master */
	dw_writel(dev, dev->master_cfg , DW_IC_CON);
	return 0;
}