C++ (Cpp) __led_init示例

示例#1

文件： stk3400_main.c 项目： tdautc19841202/dash7-ap-open-source-stack

void __platform_init()
{
    __efm32hg_mcu_init();
    __gpio_init();
    __uart_init();
    __led_init();
    __lcd_init();

#ifdef PLATFORM_USE_USB_CDC
    __usb_init_cdc();
#endif

#ifdef USE_CC1101
    //TODO: add calls to hw_gpio_configure_pin for the pins used by the CC1101 driver
    //(and possibly the spi interface)

    // configure the interrupt pins here, since hw_gpio_configure_pin() is MCU specific and not part of the common HAL API
    hw_gpio_configure_pin(CC1101_GDO0_PIN, true, gpioModeInput, 0); // TODO pull up or pull down to prevent floating
    //hw_gpio_configure_pin(CC1101_GDO2_PIN, true, gpioModeInput, 0) // TODO pull up or pull down to prevent floating // TODO not used for now
#endif
    __hw_debug_init();

    error_t err;
    err = hw_gpio_configure_pin(BUTTON0, true, gpioModeInput, 0); assert(err == SUCCESS); // TODO pull up or pull down to prevent floating
    err = hw_gpio_configure_pin(BUTTON1, true, gpioModeInput, 0); assert(err == SUCCESS); // TODO pull up or pull down to prevent floating
}

示例#2

文件： stk3400_main.c 项目： christophevg/dash7-ap-open-source-stack

void __platform_init()
{
    __efm32hg_mcu_init();
    __gpio_init();
    __led_init();
    __lcd_init();

#ifdef PLATFORM_USE_USB_CDC
    __usb_init_cdc();
#endif

#if defined(FRAMEWORK_LOG_ENABLED) || defined(FRAMEWORK_SHELL_ENABLED)
    // framework does not need console, if app needs it app should init this
    console_init();
#endif

#ifdef USE_CC1101
    // configure the interrupt pins here, since hw_gpio_configure_pin() is MCU specific and not part of the common HAL API
    hw_gpio_configure_pin(CC1101_GDO0_PIN, true, gpioModeInput, 0); // TODO pull up or pull down to prevent floating
    // hw_gpio_configure_pin(CC1101_SPI_PIN_CS, false, gpioModePushPull, 1);
    //hw_gpio_configure_pin(CC1101_GDO2_PIN, true, gpioModeInput, 0) // TODO pull up or pull down to prevent floating // TODO not used for now
#endif
    __hw_debug_init();

    error_t err;
    err = hw_gpio_configure_pin(BUTTON0, true, gpioModeInput, 0); assert(err == SUCCESS); // TODO pull up or pull down to prevent floating
    err = hw_gpio_configure_pin(BUTTON1, true, gpioModeInput, 0); assert(err == SUCCESS); // TODO pull up or pull down to prevent floating

    // TODO: only for cc430?
    // __watchdog_init(); // TODO configure from cmake?
}

示例#3

文件： cortus_main.c 项目： MOSAIC-LoPoW/dash7-ap-open-source-stack

void __platform_init()
{
    __gpio_init();
    __led_init();
    __ubutton_init();

#ifdef USE_CC1101
    // configure the interrupt pins here, since hw_gpio_configure_pin() is MCU
    // specific and not part of the common HAL API
    hw_gpio_configure_pin(CC1101_GDO0_PIN, true, gpioModeInput, 0);
    hw_gpio_configure_pin(CC1101_GDO2_PIN, true, gpioModeInput, 0);
    // hw_gpio_configure_pin(CC1101_SPI_PIN_CS, false, gpioModePushPull, 1);
#endif

#ifdef USE_SX127X
    // configure the interrupt pins here, since hw_gpio_configure_pin() is MCU
    // specific and not part of the common HAL API
    hw_gpio_configure_pin(SX127x_DIO0_PIN, true, gpioModeInput, 0);
    hw_gpio_configure_pin(SX127x_DIO1_PIN, true, gpioModeInput, 0);
#endif

    //__watchdog_init();

    /* Initialize NVRAM */


    /* Initialize NOR flash */
    blockdevice_init(permanent_blockdevice);
}

示例#4

文件： status_led.c 项目： aosp/uboot

static void status_led_init (void)
{
	led_dev_t *ld;
	int i;

	for (i = 0, ld = led_dev; i < MAX_LED_DEV; i++, ld++)
		__led_init (ld->mask, ld->state);
	status_led_init_done = 1;
}

示例#5

文件： wizzimote_main.c 项目： emunicio/dash7-ap-open-source-stack

void __platform_init()
{
    __cc430_mcu_init();
    __gpio_init();
    __uart_init();
    __led_init();

//    __hw_debug_init(); // TODO
}

示例#6

文件： platf_main.c 项目： MOSAIC-LoPoW/dash7-ap-open-source-stack

void __platform_init()
{
	__ezr32lg_mcu_init();
    __gpio_init();
    __led_init();

    __hw_debug_init();

    __watchdog_init(); // TODO configure from cmake?
}

示例#7

文件： cortus_main.c 项目： christophevg/dash7-ap-open-source-stack

void __platform_init()
{
    __gpio_init();
    console_init();
    __led_init();

    #ifdef USE_CC1101
    // configure the interrupt pins here, since hw_gpio_configure_pin() is MCU
    // specific and not part of the common HAL API
    hw_gpio_configure_pin(CC1101_GDO0_PIN, true, gpioModeInput, 0);
    // hw_gpio_configure_pin(CC1101_SPI_PIN_CS, false, gpioModePushPull, 1);
#endif

    __watchdog_init();
}

示例#8

文件： platf_main.c 项目： MOSAIC-LoPoW/dash7-ap-open-source-stack

void __platform_init()
{
	__ezr32lg_mcu_init();
    __gpio_init();
    __led_init();
    __lcd_init();


//#ifdef USE_CC1101
    //TODO: add calls to hw_gpio_configure_pin for the pins used by the CC1101 driver
    //(and possibly the spi interface)

    // configure the interrupt pins here, since hw_gpio_configure_pin() is MCU specific and not part of the common HAL API
    //hw_gpio_configure_pin(CC1101_GDO0_PIN, true, gpioModeInput, 0); // TODO pull up or pull down to prevent floating
    //hw_gpio_configure_pin(CC1101_GDO2_PIN, true, gpioModeInput, 0) // TODO pull up or pull down to prevent floating // TODO not used for now
//#endif
    __hw_debug_init();

    __watchdog_init(); // TODO configure from cmake?
}