static void adc_qmsi_enable(struct device *dev)
{
struct adc_info *info = dev->driver_data;
adc_lock(info);
qm_adc_set_mode(QM_ADC_0, QM_ADC_MODE_NORM_NO_CAL);
adc_unlock(info);
}
static void adc_qmsi_disable(struct device *dev)
{
struct adc_info *info = dev->driver_data;
adc_lock(info);
/* Go to deep sleep */
qm_adc_set_mode(QM_ADC_0, QM_ADC_MODE_DEEP_PWR_DOWN);
adc_unlock(info);
}
ADC_GET(nxp, adc, waittime) {
/* Lock ADC */
adc_lock(adc, waittime, -1);
/* Lock ADC Controller */
CTRL_LOCK(adc, waittime, -1);
/* TODO implement */
CTRL_UNLOCK(adc, -1);
adc_unlock(adc, -1);
return -1;
}
static int adc_qmsi_read(struct device *dev, struct adc_seq_table *seq_tbl)
{
int i, ret = 0;
qm_adc_xfer_t xfer;
qm_adc_config_t cfg;
struct adc_info *info = dev->driver_data;
if (qm_adc_get_config(QM_ADC_0, &cfg) != QM_RC_OK) {
return -ENOTSUP;
}
for (i = 0; i < seq_tbl->num_entries; i++) {
xfer.ch = (qm_adc_channel_t *)&seq_tbl->entries[i].channel_id;
/* Just one channel at the time using the Zephyr sequence table */
xfer.ch_len = 1;
xfer.samples = (uint32_t *)seq_tbl->entries[i].buffer;
/* buffer length (bytes) the number of samples, the QMSI Driver does
* not allow more than QM_ADC_FIFO_LEN samples at the time in polling
* mode, if that happens, the qm_adc_convert api will return with an
* error
*/
xfer.samples_len = (seq_tbl->entries[i].buffer_length);
xfer.complete_callback = NULL;
xfer.error_callback = NULL;
cfg.window = seq_tbl->entries[i].sampling_delay;
adc_lock(info);
if (qm_adc_set_config(QM_ADC_0, &cfg) != QM_RC_OK) {
ret = -EINVAL;
adc_unlock(info);
break;
}
/* Run the conversion, here the function will poll for the samples
* The function will constantly read the status register to check if
* the number of samples required has been captured
*/
if (qm_adc_convert(QM_ADC_0, &xfer) != QM_RC_OK) {
ret = -EIO;
adc_unlock(info);
break;
}
/* Successful Analog to Digital conversion */
adc_unlock(info);
}
return ret;
}
static int adc_qmsi_read(struct device *dev, struct adc_seq_table *seq_tbl)
{
int i, ret = 0;
qm_adc_xfer_t xfer;
qm_adc_config_t cfg;
struct adc_info *info = dev->driver_data;
if (qm_adc_get_config(QM_ADC_0, &cfg) != QM_RC_OK) {
return -ENOTSUP;
}
for (i = 0; i < seq_tbl->num_entries; i++) {
xfer.ch = (qm_adc_channel_t *)&seq_tbl->entries[i].channel_id;
/* Just one channel at the time using the Zephyr sequence table */
xfer.ch_len = 1;
xfer.samples = (uint32_t *)seq_tbl->entries[i].buffer;
xfer.samples_len = (seq_tbl->entries[i].buffer_length) >> 2;
xfer.complete_callback = complete_callback;
xfer.error_callback = error_callback;
cfg.window = seq_tbl->entries[i].sampling_delay;
adc_lock(info);
if (qm_adc_set_config(QM_ADC_0, &cfg) != QM_RC_OK) {
ret = -EINVAL;
adc_unlock(info);
break;
}
/* ADC info used by the callbacks */
adc_context = info;
/* This is the interrupt driven API, will generate and interrupt and
* call the complete_callback function once the samples have been
* obtained
*/
if (qm_adc_irq_convert(QM_ADC_0, &xfer) != QM_RC_OK) {
adc_context = NULL;
ret = -EIO;
adc_unlock(info);
break;
}
/* Wait for the interrupt to finish */
device_sync_call_wait(&info->sync);
if (info->state == ADC_STATE_ERROR) {
ret = -EIO;
adc_unlock(info);
break;
}
adc_context = NULL;
/* Successful Analog to Digital conversion */
adc_unlock(info);
}
return ret;
}
