u32 adi_ssl_Init(void) {
u32 i;
u32 Result;
do {
// initialize the interrupt manager, parameters are
// pointer to memory for interrupt manager to use
// memory size (in bytes)
// location where the number of secondary handlers that can be
// supported will be stored
// parameter for adi_int_EnterCriticalRegion
// (always NULL for VDK and standalone systems)
Result = adi_int_Init(InterruptServiceData,
sizeof(InterruptServiceData),
&i, ADI_SSL_ENTER_CRITICAL);
while ((ADI_INT_RESULT_SUCCESS != Result) \
||(ADI_SSL_INT_NUM_SECONDARY_HANDLERS != i))
{
}
// initialize the EBIU, parameters are
// address of table containing RAM parameters
// 0 - reserved field, always 0
// Ignores result, so it can keep going if it's already initialized
Result = adi_ebiu_Init(config_ram, 0);
while ((ADI_EBIU_RESULT_SUCCESS != Result) &&
(ADI_EBIU_RESULT_ALREADY_INITIALIZED != Result))
{
}
// initialize power, parameters are
// address of table containing processor information
// keep going if it's already initialized
Result = adi_pwr_Init(config_power);
while ((ADI_PWR_RESULT_SUCCESS != Result) &&
(ADI_PWR_RESULT_ALREADY_INITIALIZED != Result))
{
}
// U-boot done setFreq
Result = adi_pwr_SetFreq (256000000, 256000000, ADI_PWR_DF_ON);
while (ADI_PWR_RESULT_SUCCESS != Result)
{
}
// initialize port control, parameters are
// parameter for adi_int_EnterCriticalRegion
// (always NULL for VDK and standalone systems)
Result = adi_ports_Init(ADI_SSL_ENTER_CRITICAL);
while (ADI_PORTS_RESULT_SUCCESS != Result)
{
}
// initialize deferred callback service if needed, parameters are
// pointer to data
// size of data
// location where number of servers is stored
// parameter for adi_int_EnterCriticalRegion
// (always NULL for VDK and standalone systems)
#if (ADI_SSL_DCB_NUM_SERVERS != 0)
Result = adi_dcb_Init(DeferredCallbackServiceData,
sizeof(DeferredCallbackServiceData),
&i, ADI_SSL_ENTER_CRITICAL);
while ((ADI_DCB_RESULT_SUCCESS != Result) \
|| (ADI_SSL_DCB_NUM_SERVERS != i))
{
}
#endif
// initialize the dma manager if needed, parameters are
// pointer to memory for the DMA manager to use
// memory size (in bytes)
// parameter for adi_int_EnterCriticalRegion
// (always NULL for VDK and standalone systems)
#if (ADI_SSL_DMA_NUM_CHANNELS != 0)
Result = adi_dma_Init(DMAServiceData,
sizeof(DMAServiceData),
&i, &adi_dma_ManagerHandle, ADI_SSL_ENTER_CRITICAL);
while ((Result != ADI_DMA_RESULT_SUCCESS) \
|| (ADI_SSL_DMA_NUM_CHANNELS != i))
{
}
#endif
// initialize the flag manager, parameters are
// pointer to memory for the flag service to use
// memory size (in bytes)
// location where the number of flag callbacks that can be
// supported will be stored
// parameter for adi_int_EnterCriticalRegion
// (always NULL for VDK and standalone systems)
Result = adi_flag_Init(FlagServiceData, sizeof(FlagServiceData),
&i, ADI_SSL_ENTER_CRITICAL);
while ((Result != ADI_FLAG_RESULT_SUCCESS) \
|| (ADI_SSL_FLAG_NUM_CALLBACKS != i))
{
}
// initialize the timer manager, parameters are
// parameter for adi_int_EnterCriticalRegion
// (always NULL for VDK and standalone systems)
Result = adi_tmr_Init(ADI_SSL_ENTER_CRITICAL);
while (ADI_TMR_RESULT_SUCCESS != Result)
{
}
#if !defined(ADI_SSL_RTC_NO_INIT)
// initialize the RTC service
// parameter for adi_int_EnterCriticalRegion
// (always NULL for VDK and standalone systems)
Result = adi_rtc_Init(ADI_SSL_ENTER_CRITICAL);
while (ADI_RTC_RESULT_SUCCESS != Result)
{
}
#endif
// initialize the semaphore service if needed, parameters are
// pointer to memory for the semaphore service to use
// memory size (in bytes)
// parameter for adi_int_EnterCriticalRegion
// (always NULL for VDK and standalone systems)
#if (ADI_SSL_SEM_NUM_SEMAPHORES != 0)
Result = adi_sem_Init(SemaphoreServiceData,
sizeof(SemaphoreServiceData),
&i, ADI_SSL_ENTER_CRITICAL);
while ((ADI_SEM_RESULT_SUCCESS != Result) \
|| (ADI_SSL_SEM_NUM_SEMAPHORES != i))
{
}
#endif
// initialize the device manager if needed, parameters are
// pointer to data for the device manager to use
// size of the data in bytes
// location where the number of devices that can be managed
// will be stored
// location where the device manager handle will be stored
// parameter for adi_int_EnterCriticalRegion() function
// (always NULL for standalone and VDK)
#if (ADI_SSL_DEV_NUM_DEVICES != 0)
Result = adi_dev_Init(DevMgrData, sizeof(DevMgrData),
&i, &adi_dev_ManagerHandle,
ADI_SSL_ENTER_CRITICAL);
while ((Result != ADI_DEV_RESULT_SUCCESS) \
|| (ADI_SSL_DEV_NUM_DEVICES != i))
{
}
#endif
} while (0); // WHILE (no errors or 1 pass complete)
return (Result);
}
/******************************************************************
*
* Function: system_init()
* Description:
* Initializes Device Manager, Interrupt
* Manager and the Stack.
* Return:
* Returns 1 upon success -1 upon failure.
*
******************************************************************/
int system_init()
{
ADI_DEV_MANAGER_HANDLE devmgr_handle;
unsigned int result;
u32 response_count,critical_reg;
ADI_DEV_DEVICE_HANDLE lan_handle;
char *ether_stack_block;
u16 phyregs[32];
#ifdef __ADSPBF537__
const unsigned int mac_address_in_flash = 0x203F0000;
#endif
/* initialize the interrupt manager */
result = adi_int_Init(
intmgr_storage,
sizeof(intmgr_storage),
&response_count,
&critical_reg);
DEBUG_PRINT("Failed to Initialize interrupt manager\n",result != ADI_DEV_RESULT_SUCCESS);
/* initialize the device manager */
result = adi_dev_Init(
devmgr_storage,
sizeof(devmgr_storage),
&response_count,
&devmgr_handle,
&imask_storage);
DEBUG_PRINT("Failed to Initilize device manager\n",result != ADI_DEV_RESULT_SUCCESS);
/* Initialize the kernel */
ker_init((void*)0);
/* set thread type for the stack threads */
ker_set_auxdata((void*)kADI_TOOLS_IOEThreadType);
/* open lan-device */
result = adi_dev_Open(
devmgr_handle,
#if defined(__ADSPBF533__)
&ADI_ETHER_USBLAN_Entrypoint,
#elif defined(__ADSPBF537__)
&ADI_ETHER_BF537_Entrypoint,
#endif
0,
NULL,
&lan_handle,
ADI_DEV_DIRECTION_BIDIRECTIONAL,
NULL,
NULL,
(ADI_DCB_CALLBACK_FN)stack_callback_handler);
DEBUG_PRINT("Failed to open the lan-device\n",result != ADI_DEV_RESULT_SUCCESS);
/* set the services with in stack */
set_pli_services(1,&lan_handle);
#ifdef __ADSPBF537__
/*
* Read the EZ-KIT Lite's assigned MAC address, found at address 0x203F0000.
* We need to first set the AMGCTL register to allow access to asynchronous
* memory.
*
* DMA gets more priority than the processor while accessing SDRAM.
*/
*pEBIU_AMGCTL = 0xFF | 0x100;
memcpy ( &hwaddr, (unsigned char *) mac_address_in_flash, sizeof ( hwaddr ) );
result = adi_dev_Control(
lan_handle,
ADI_ETHER_CMD_SET_MAC_ADDR,
(void*)&hwaddr);
DEBUG_PRINT("Failed set MAC address\n",result != ADI_DEV_RESULT_SUCCESS);
#endif
/* supply some memory for the driver */
result = adi_dev_Control(
lan_handle,
ADI_ETHER_CMD_SUPPLY_MEM,
&memtable);
DEBUG_PRINT("Failed to supply memory to driver\n",result != ADI_DEV_RESULT_SUCCESS);
result = adi_dev_Control(
lan_handle,
ADI_DEV_CMD_SET_DATAFLOW_METHOD,
(void*)TRUE);
/* Initialze the stack with user specified configuration priority -3 and
* poll period of p_period msec. The stack is allocated a memory buffer as well.
*/
ether_stack_block = (char *) malloc ( ETHER_STACK_SIZE );
DEBUG_PRINT("Failed to malloc stack \n",!ether_stack_block);
init_stack ( 3, p_period, ETHER_STACK_SIZE, ether_stack_block );
/* Start the MAC */
result = adi_dev_Control (
lan_handle,
ADI_ETHER_CMD_START,
NULL);
DEBUG_PRINT("Failed to start the driver\n",result != ADI_DEV_RESULT_SUCCESS);
/* read the PHY controller registers */
adi_dev_Control(lan_handle,ADI_ETHER_CMD_GET_PHY_REGS,phyregs);
DEBUG_PRINT("PHY Controller has failed and the board needs power cycled\n",phyregs[1]==0xFFFF);
/* wait for the link to be up */
if ( (phyregs[1]&0x4) ==0)
{
printf("Waiting for the link to be established\n");
while ( (phyregs[1]&0x4) ==0)
{
adi_dev_Control(lan_handle,ADI_ETHER_CMD_GET_PHY_REGS,phyregs);
}
}
printf("Link established\n");
return 1;
}
