示例#1
0
static int aha152x_config_cs(struct pcmcia_device *link)
{
    scsi_info_t *info = link->priv;
    struct aha152x_setup s;
    int last_ret, last_fn;
    struct Scsi_Host *host;

    DEBUG(0, "aha152x_config(0x%p)\n", link);

    last_ret = pcmcia_loop_config(link, aha152x_config_check, NULL);
    if (last_ret) {
	cs_error(link, RequestIO, last_ret);
	goto failed;
    }

    CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
    CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
    
    
    memset(&s, 0, sizeof(s));
    s.conf        = "PCMCIA setup";
    s.io_port     = link->io.BasePort1;
    s.irq         = link->irq.AssignedIRQ;
    s.scsiid      = host_id;
    s.reconnect   = reconnect;
    s.parity      = parity;
    s.synchronous = synchronous;
    s.delay       = reset_delay;
    if (ext_trans)
        s.ext_trans = ext_trans;

    host = aha152x_probe_one(&s);
    if (host == NULL) {
	printk(KERN_INFO "aha152x_cs: no SCSI devices found\n");
	goto cs_failed;
    }

    sprintf(info->node.dev_name, "scsi%d", host->host_no);
    link->dev_node = &info->node;
    info->host = host;

    return 0;

cs_failed:
    cs_error(link, last_fn, last_ret);
failed:
    aha152x_release_cs(link);
    return -ENODEV;
}
static int aha152x_config_cs(struct pcmcia_device *link)
{
    scsi_info_t *info = link->priv;
    struct aha152x_setup s;
    int ret;
    struct Scsi_Host *host;

    dev_dbg(&link->dev, "aha152x_config\n");

    ret = pcmcia_loop_config(link, aha152x_config_check, NULL);
    if (ret)
	    goto failed;

    if (!link->irq)
	    goto failed;

    ret = pcmcia_request_configuration(link, &link->conf);
    if (ret)
	    goto failed;
    
    /* Set configuration options for the aha152x driver */
    memset(&s, 0, sizeof(s));
    s.conf        = "PCMCIA setup";
    s.io_port     = link->io.BasePort1;
    s.irq         = link->irq;
    s.scsiid      = host_id;
    s.reconnect   = reconnect;
    s.parity      = parity;
    s.synchronous = synchronous;
    s.delay       = reset_delay;
    if (ext_trans)
        s.ext_trans = ext_trans;

    host = aha152x_probe_one(&s);
    if (host == NULL) {
	printk(KERN_INFO "aha152x_cs: no SCSI devices found\n");
	goto failed;
    }

    info->host = host;

    return 0;

failed:
    aha152x_release_cs(link);
    return -ENODEV;
}
示例#3
0
static void aha152x_config_cs(dev_link_t *link)
{
    client_handle_t handle = link->handle;
    scsi_info_t *info = link->priv;
    struct aha152x_setup s;
    tuple_t tuple;
    cisparse_t parse;
    int i, last_ret, last_fn;
    u_char tuple_data[64];
    struct Scsi_Host *host;
    
    DEBUG(0, "aha152x_config(0x%p)\n", link);

    tuple.DesiredTuple = CISTPL_CONFIG;
    tuple.TupleData = tuple_data;
    tuple.TupleDataMax = 64;
    tuple.TupleOffset = 0;
    CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple));
    CS_CHECK(GetTupleData, pcmcia_get_tuple_data(handle, &tuple));
    CS_CHECK(ParseTuple, pcmcia_parse_tuple(handle, &tuple, &parse));
    link->conf.ConfigBase = parse.config.base;

    /* Configure card */
    link->state |= DEV_CONFIG;

    tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
    CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple));
    while (1) {
	if (pcmcia_get_tuple_data(handle, &tuple) != 0 ||
		pcmcia_parse_tuple(handle, &tuple, &parse) != 0)
	    goto next_entry;
	/* For New Media T&J, look for a SCSI window */
	if (parse.cftable_entry.io.win[0].len >= 0x20)
	    link->io.BasePort1 = parse.cftable_entry.io.win[0].base;
	else if ((parse.cftable_entry.io.nwin > 1) &&
		 (parse.cftable_entry.io.win[1].len >= 0x20))
	    link->io.BasePort1 = parse.cftable_entry.io.win[1].base;
	if ((parse.cftable_entry.io.nwin > 0) &&
	    (link->io.BasePort1 < 0xffff)) {
	    link->conf.ConfigIndex = parse.cftable_entry.index;
	    i = pcmcia_request_io(handle, &link->io);
	    if (i == CS_SUCCESS) break;
	}
    next_entry:
	CS_CHECK(GetNextTuple, pcmcia_get_next_tuple(handle, &tuple));
    }
    
    CS_CHECK(RequestIRQ, pcmcia_request_irq(handle, &link->irq));
    CS_CHECK(RequestConfiguration, pcmcia_request_configuration(handle, &link->conf));
    
    /* Set configuration options for the aha152x driver */
    memset(&s, 0, sizeof(s));
    s.conf        = "PCMCIA setup";
    s.io_port     = link->io.BasePort1;
    s.irq         = link->irq.AssignedIRQ;
    s.scsiid      = host_id;
    s.reconnect   = reconnect;
    s.parity      = parity;
    s.synchronous = synchronous;
    s.delay       = reset_delay;
    if (ext_trans)
        s.ext_trans = ext_trans;

    host = aha152x_probe_one(&s);
    if (host == NULL) {
	printk(KERN_INFO "aha152x_cs: no SCSI devices found\n");
	goto cs_failed;
    }

    sprintf(info->node.dev_name, "scsi%d", host->host_no);
    link->dev = &info->node;
    info->host = host;

    link->state &= ~DEV_CONFIG_PENDING;
    return;
    
cs_failed:
    cs_error(link->handle, last_fn, last_ret);
    aha152x_release_cs(link);
    return;
}