static void acpi_dsdt_add_gpio(Aml *scope, const MemMapEntry *gpio_memmap,
uint32_t gpio_irq)
{
Aml *dev = aml_device("GPO0");
aml_append(dev, aml_name_decl("_HID", aml_string("ARMH0061")));
aml_append(dev, aml_name_decl("_ADR", aml_int(0)));
aml_append(dev, aml_name_decl("_UID", aml_int(0)));
Aml *crs = aml_resource_template();
aml_append(crs, aml_memory32_fixed(gpio_memmap->base, gpio_memmap->size,
AML_READ_WRITE));
aml_append(crs, aml_interrupt(AML_CONSUMER, AML_LEVEL, AML_ACTIVE_HIGH,
AML_EXCLUSIVE, &gpio_irq, 1));
aml_append(dev, aml_name_decl("_CRS", crs));
Aml *aei = aml_resource_template();
/* Pin 3 for power button */
const uint32_t pin_list[1] = {3};
aml_append(aei, aml_gpio_int(AML_CONSUMER, AML_EDGE, AML_ACTIVE_HIGH,
AML_EXCLUSIVE, AML_PULL_UP, 0, pin_list, 1,
"GPO0", NULL, 0));
aml_append(dev, aml_name_decl("_AEI", aei));
/* _E03 is handle for power button */
Aml *method = aml_method("_E03", 0, AML_NOTSERIALIZED);
aml_append(method, aml_notify(aml_name(ACPI_POWER_BUTTON_DEVICE),
aml_int(0x80)));
aml_append(dev, method);
aml_append(scope, dev);
}
static void acpi_dsdt_add_fw_cfg(Aml *scope, const MemMapEntry *fw_cfg_memmap)
{
Aml *dev = aml_device("FWCF");
aml_append(dev, aml_name_decl("_HID", aml_string("QEMU0002")));
/* device present, functioning, decoding, not shown in UI */
aml_append(dev, aml_name_decl("_STA", aml_int(0xB)));
Aml *crs = aml_resource_template();
aml_append(crs, aml_memory32_fixed(fw_cfg_memmap->base,
fw_cfg_memmap->size, AML_READ_WRITE));
aml_append(dev, aml_name_decl("_CRS", crs));
aml_append(scope, dev);
}
static void acpi_dsdt_add_flash(Aml *scope, const MemMapEntry *flash_memmap)
{
Aml *dev, *crs;
hwaddr base = flash_memmap->base;
hwaddr size = flash_memmap->size / 2;
dev = aml_device("FLS0");
aml_append(dev, aml_name_decl("_HID", aml_string("LNRO0015")));
aml_append(dev, aml_name_decl("_UID", aml_int(0)));
crs = aml_resource_template();
aml_append(crs, aml_memory32_fixed(base, size, AML_READ_WRITE));
aml_append(dev, aml_name_decl("_CRS", crs));
aml_append(scope, dev);
dev = aml_device("FLS1");
aml_append(dev, aml_name_decl("_HID", aml_string("LNRO0015")));
aml_append(dev, aml_name_decl("_UID", aml_int(1)));
crs = aml_resource_template();
aml_append(crs, aml_memory32_fixed(base + size, size, AML_READ_WRITE));
aml_append(dev, aml_name_decl("_CRS", crs));
aml_append(scope, dev);
}
static void acpi_dsdt_add_uart(Aml *scope, const MemMapEntry *uart_memmap,
uint32_t uart_irq)
{
Aml *dev = aml_device("COM0");
aml_append(dev, aml_name_decl("_HID", aml_string("ARMH0011")));
aml_append(dev, aml_name_decl("_UID", aml_int(0)));
Aml *crs = aml_resource_template();
aml_append(crs, aml_memory32_fixed(uart_memmap->base,
uart_memmap->size, AML_READ_WRITE));
aml_append(crs,
aml_interrupt(AML_CONSUMER, AML_LEVEL, AML_ACTIVE_HIGH,
AML_EXCLUSIVE, &uart_irq, 1));
aml_append(dev, aml_name_decl("_CRS", crs));
/* The _ADR entry is used to link this device to the UART described
* in the SPCR table, i.e. SPCR.base_address.address == _ADR.
*/
aml_append(dev, aml_name_decl("_ADR", aml_int(uart_memmap->base)));
aml_append(scope, dev);
}
static void acpi_dsdt_add_virtio(Aml *scope,
const MemMapEntry *virtio_mmio_memmap,
uint32_t mmio_irq, int num)
{
hwaddr base = virtio_mmio_memmap->base;
hwaddr size = virtio_mmio_memmap->size;
int i;
for (i = 0; i < num; i++) {
uint32_t irq = mmio_irq + i;
Aml *dev = aml_device("VR%02u", i);
aml_append(dev, aml_name_decl("_HID", aml_string("LNRO0005")));
aml_append(dev, aml_name_decl("_UID", aml_int(i)));
Aml *crs = aml_resource_template();
aml_append(crs, aml_memory32_fixed(base, size, AML_READ_WRITE));
aml_append(crs,
aml_interrupt(AML_CONSUMER, AML_LEVEL, AML_ACTIVE_HIGH,
AML_EXCLUSIVE, &irq, 1));
aml_append(dev, aml_name_decl("_CRS", crs));
aml_append(scope, dev);
base += size;
}
}