示例#1
0
void resetLedStripConfig(ledStripConfig_t *ledStripConfig)
{
    applyDefaultColors(ledStripConfig->colors);
    applyDefaultLedStripConfig(ledStripConfig->ledConfigs);
    applyDefaultModeColors(ledStripConfig->modeColors);
    applyDefaultSpecialColors(&(ledStripConfig->specialColors));
    ledStripConfig->ledstrip_visual_beeper = 0;
    ledStripConfig->ledstrip_aux_channel = THROTTLE;

    for (int i = 0; i < USABLE_TIMER_CHANNEL_COUNT; i++) {
        if (timerHardware[i].usageFlags & TIM_USE_LED) {
            ledStripConfig->ioTag = timerHardware[i].tag;
            return;
        }
    }
    ledStripConfig->ioTag = IO_TAG_NONE;
}
示例#2
0
文件: config.c 项目: npsm/inav
// Default settings
static void resetConf(void)
{
    int i;

    // Clear all configuration
    memset(&masterConfig, 0, sizeof(master_t));
    setProfile(0);
    setControlRateProfile(0);

    masterConfig.version = EEPROM_CONF_VERSION;
    masterConfig.mixerMode = MIXER_QUADX;
    featureClearAll();
    persistentFlagClearAll();
    featureSet(DEFAULT_RX_FEATURE | FEATURE_FAILSAFE);
#ifdef DEFAULT_FEATURES
    featureSet(DEFAULT_FEATURES);
#endif

#ifdef BOARD_HAS_VOLTAGE_DIVIDER
    // only enable the VBAT feature by default if the board has a voltage divider otherwise
    // the user may see incorrect readings and unexpected issues with pin mappings may occur.
    featureSet(FEATURE_VBAT);
#endif

    // global settings
    masterConfig.current_profile_index = 0;     // default profile
    masterConfig.dcm_kp_acc = 2500;             // 0.25 * 10000
    masterConfig.dcm_ki_acc = 50;               // 0.005 * 10000
    masterConfig.dcm_kp_mag = 10000;            // 1.00 * 10000
    masterConfig.dcm_ki_mag = 0;                // 0.00 * 10000
    masterConfig.gyro_lpf = 3;                  // INV_FILTER_42HZ, In case of ST gyro, will default to 32Hz instead

    resetAccelerometerTrims(&masterConfig.accZero, &masterConfig.accGain);

    resetSensorAlignment(&masterConfig.sensorAlignmentConfig);

    masterConfig.boardAlignment.rollDeciDegrees = 0;
    masterConfig.boardAlignment.pitchDeciDegrees = 0;
    masterConfig.boardAlignment.yawDeciDegrees = 0;
    masterConfig.acc_hardware = ACC_DEFAULT;     // default/autodetect
    masterConfig.gyroConfig.gyroMovementCalibrationThreshold = 32;

    masterConfig.mag_hardware = MAG_DEFAULT;     // default/autodetect
    masterConfig.baro_hardware = BARO_DEFAULT;   // default/autodetect

    resetBatteryConfig(&masterConfig.batteryConfig);

#ifdef TELEMETRY
    resetTelemetryConfig(&masterConfig.telemetryConfig);
#endif

    masterConfig.rxConfig.serialrx_provider = 0;
    masterConfig.rxConfig.nrf24rx_protocol = NRF24_DEFAULT_PROTOCOL;
    masterConfig.rxConfig.spektrum_sat_bind = 0;
    masterConfig.rxConfig.midrc = 1500;
    masterConfig.rxConfig.mincheck = 1100;
    masterConfig.rxConfig.maxcheck = 1900;
    masterConfig.rxConfig.rx_min_usec = 885;          // any of first 4 channels below this value will trigger rx loss detection
    masterConfig.rxConfig.rx_max_usec = 2115;         // any of first 4 channels above this value will trigger rx loss detection

    for (i = 0; i < MAX_SUPPORTED_RC_CHANNEL_COUNT; i++) {
        rxFailsafeChannelConfiguration_t *channelFailsafeConfiguration = &masterConfig.rxConfig.failsafe_channel_configurations[i];
        channelFailsafeConfiguration->mode = (i < NON_AUX_CHANNEL_COUNT) ? RX_FAILSAFE_MODE_AUTO : RX_FAILSAFE_MODE_HOLD;
        channelFailsafeConfiguration->step = (i == THROTTLE) ? CHANNEL_VALUE_TO_RXFAIL_STEP(masterConfig.rxConfig.rx_min_usec) : CHANNEL_VALUE_TO_RXFAIL_STEP(masterConfig.rxConfig.midrc);
    }

    masterConfig.rxConfig.rssi_channel = 0;
    masterConfig.rxConfig.rssi_scale = RSSI_SCALE_DEFAULT;
    masterConfig.rxConfig.rssi_ppm_invert = 0;
    masterConfig.rxConfig.rcSmoothing = 1;

    resetAllRxChannelRangeConfigurations(masterConfig.rxConfig.channelRanges);

    masterConfig.inputFilteringMode = INPUT_FILTERING_DISABLED;

    masterConfig.disarm_kill_switch = 1;
    masterConfig.auto_disarm_delay = 5;
    masterConfig.small_angle = 25;

    resetMixerConfig(&masterConfig.mixerConfig);

    // Motor/ESC/Servo
    resetEscAndServoConfig(&masterConfig.escAndServoConfig);
    resetFlight3DConfig(&masterConfig.flight3DConfig);

#ifdef BRUSHED_MOTORS
    masterConfig.motor_pwm_rate = BRUSHED_MOTORS_PWM_RATE;
#else
    masterConfig.motor_pwm_rate = BRUSHLESS_MOTORS_PWM_RATE;
#endif
    masterConfig.servo_pwm_rate = 50;

#ifdef GPS
    // gps/nav stuff
    masterConfig.gpsConfig.provider = GPS_UBLOX;
    masterConfig.gpsConfig.sbasMode = SBAS_NONE;
    masterConfig.gpsConfig.autoConfig = GPS_AUTOCONFIG_ON;
    masterConfig.gpsConfig.autoBaud = GPS_AUTOBAUD_ON;
    masterConfig.gpsConfig.dynModel = GPS_DYNMODEL_AIR_1G;
#endif

#ifdef NAV
    resetNavConfig(&masterConfig.navConfig);
#endif

    resetSerialConfig(&masterConfig.serialConfig);

    masterConfig.looptime = 2000;
    masterConfig.i2c_overclock = 0;
    masterConfig.gyroSync = 0;
    masterConfig.gyroSyncDenominator = 2;

    resetPidProfile(&currentProfile->pidProfile);

    resetControlRateConfig(&masterConfig.controlRateProfiles[0]);

    // for (i = 0; i < CHECKBOXITEMS; i++)
    //     cfg.activate[i] = 0;

    currentProfile->mag_declination = 0;

    currentProfile->modeActivationOperator = MODE_OPERATOR_OR; // default is to OR multiple-channel mode activation conditions

    resetBarometerConfig(&masterConfig.barometerConfig);

    // Radio
    parseRcChannels("AETR1234", &masterConfig.rxConfig);

    resetRcControlsConfig(&currentProfile->rcControlsConfig);

    currentProfile->throttle_tilt_compensation_strength = 0;      // 0-100, 0 - disabled

    // Failsafe Variables
    masterConfig.failsafeConfig.failsafe_delay = 10;              // 1sec
    masterConfig.failsafeConfig.failsafe_off_delay = 200;         // 20sec
    masterConfig.failsafeConfig.failsafe_throttle = 1000;         // default throttle off.
    masterConfig.failsafeConfig.failsafe_kill_switch = 0;         // default failsafe switch action is identical to rc link loss
    masterConfig.failsafeConfig.failsafe_throttle_low_delay = 100; // default throttle low delay for "just disarm" on failsafe condition
    masterConfig.failsafeConfig.failsafe_procedure = 0;           // default full failsafe procedure is 0: auto-landing

#ifdef USE_SERVOS
    // servos
    for (i = 0; i < MAX_SUPPORTED_SERVOS; i++) {
        currentProfile->servoConf[i].min = DEFAULT_SERVO_MIN;
        currentProfile->servoConf[i].max = DEFAULT_SERVO_MAX;
        currentProfile->servoConf[i].middle = DEFAULT_SERVO_MIDDLE;
        currentProfile->servoConf[i].rate = 100;
        currentProfile->servoConf[i].angleAtMin = DEFAULT_SERVO_MIN_ANGLE;
        currentProfile->servoConf[i].angleAtMax = DEFAULT_SERVO_MAX_ANGLE;
        currentProfile->servoConf[i].forwardFromChannel = CHANNEL_FORWARDING_DISABLED;
    }

    // gimbal
    currentProfile->gimbalConfig.mode = GIMBAL_MODE_NORMAL;

    currentProfile->flaperon_throw_offset = FLAPERON_THROW_DEFAULT;
    currentProfile->flaperon_throw_inverted = 0;

#endif

    // custom mixer. clear by defaults.
    for (i = 0; i < MAX_SUPPORTED_MOTORS; i++)
        masterConfig.customMotorMixer[i].throttle = 0.0f;

#ifdef LED_STRIP
    applyDefaultColors(masterConfig.colors);
    applyDefaultLedStripConfig(masterConfig.ledConfigs);
    applyDefaultModeColors(masterConfig.modeColors);
    applyDefaultSpecialColors(&(masterConfig.specialColors));
    masterConfig.ledstrip_visual_beeper = 0;
#endif

#ifdef BLACKBOX
#ifdef ENABLE_BLACKBOX_LOGGING_ON_SPIFLASH_BY_DEFAULT
    featureSet(FEATURE_BLACKBOX);
    masterConfig.blackbox_device = BLACKBOX_DEVICE_FLASH;
#else
    masterConfig.blackbox_device = BLACKBOX_DEVICE_SERIAL;
#endif
    masterConfig.blackbox_rate_num = 1;
    masterConfig.blackbox_rate_denom = 1;
#endif

    // alternative defaults settings for COLIBRI RACE targets
#if defined(COLIBRI_RACE)
    masterConfig.looptime = 1000;

    masterConfig.rxConfig.rcmap[0] = 1;
    masterConfig.rxConfig.rcmap[1] = 2;
    masterConfig.rxConfig.rcmap[2] = 3;
    masterConfig.rxConfig.rcmap[3] = 0;
    masterConfig.rxConfig.rcmap[4] = 4;
    masterConfig.rxConfig.rcmap[5] = 5;
    masterConfig.rxConfig.rcmap[6] = 6;
    masterConfig.rxConfig.rcmap[7] = 7;

    featureSet(FEATURE_ONESHOT125);
    featureSet(FEATURE_VBAT);
    featureSet(FEATURE_LED_STRIP);
    featureSet(FEATURE_FAILSAFE);
#endif

    // alternative defaults settings for ALIENFLIGHTF1 and ALIENFLIGHTF3 targets
#ifdef ALIENFLIGHTF1
#ifdef ALIENFLIGHTF3
    masterConfig.serialConfig.portConfigs[2].functionMask = FUNCTION_RX_SERIAL;
    masterConfig.batteryConfig.vbatscale = 20;
#else
    masterConfig.serialConfig.portConfigs[1].functionMask = FUNCTION_RX_SERIAL;
#endif
    masterConfig.rxConfig.serialrx_provider = 1;
    masterConfig.rxConfig.spektrum_sat_bind = 5;
    masterConfig.escAndServoConfig.minthrottle = 1000;
    masterConfig.escAndServoConfig.maxthrottle = 2000;
    masterConfig.motor_pwm_rate = 32000;
    masterConfig.looptime = 2000;
    currentProfile->pidProfile.P8[ROLL] = 36;
    currentProfile->pidProfile.P8[PITCH] = 36;
    masterConfig.failsafeConfig.failsafe_delay = 2;
    masterConfig.failsafeConfig.failsafe_off_delay = 0;
    currentControlRateProfile->rates[FD_PITCH] = CONTROL_RATE_CONFIG_ROLL_PITCH_RATE_DEFAULT;
    currentControlRateProfile->rates[FD_ROLL] = CONTROL_RATE_CONFIG_ROLL_PITCH_RATE_DEFAULT;
    currentControlRateProfile->rates[FD_YAW] = CONTROL_RATE_CONFIG_YAW_RATE_DEFAULT;
    parseRcChannels("TAER1234", &masterConfig.rxConfig);

    //  { 1.0f, -0.414178f,  1.0f, -1.0f },          // REAR_R
    masterConfig.customMotorMixer[0].throttle = 1.0f;
    masterConfig.customMotorMixer[0].roll = -0.414178f;
    masterConfig.customMotorMixer[0].pitch = 1.0f;
    masterConfig.customMotorMixer[0].yaw = -1.0f;

    //  { 1.0f, -0.414178f, -1.0f,  1.0f },          // FRONT_R
    masterConfig.customMotorMixer[1].throttle = 1.0f;
    masterConfig.customMotorMixer[1].roll = -0.414178f;
    masterConfig.customMotorMixer[1].pitch = -1.0f;
    masterConfig.customMotorMixer[1].yaw = 1.0f;

    //  { 1.0f,  0.414178f,  1.0f,  1.0f },          // REAR_L
    masterConfig.customMotorMixer[2].throttle = 1.0f;
    masterConfig.customMotorMixer[2].roll = 0.414178f;
    masterConfig.customMotorMixer[2].pitch = 1.0f;
    masterConfig.customMotorMixer[2].yaw = 1.0f;

    //  { 1.0f,  0.414178f, -1.0f, -1.0f },          // FRONT_L
    masterConfig.customMotorMixer[3].throttle = 1.0f;
    masterConfig.customMotorMixer[3].roll = 0.414178f;
    masterConfig.customMotorMixer[3].pitch = -1.0f;
    masterConfig.customMotorMixer[3].yaw = -1.0f;

    //  { 1.0f, -1.0f, -0.414178f, -1.0f },          // MIDFRONT_R
    masterConfig.customMotorMixer[4].throttle = 1.0f;
    masterConfig.customMotorMixer[4].roll = -1.0f;
    masterConfig.customMotorMixer[4].pitch = -0.414178f;
    masterConfig.customMotorMixer[4].yaw = -1.0f;

    //  { 1.0f,  1.0f, -0.414178f,  1.0f },          // MIDFRONT_L
    masterConfig.customMotorMixer[5].throttle = 1.0f;
    masterConfig.customMotorMixer[5].roll = 1.0f;
    masterConfig.customMotorMixer[5].pitch = -0.414178f;
    masterConfig.customMotorMixer[5].yaw = 1.0f;

    //  { 1.0f, -1.0f,  0.414178f,  1.0f },          // MIDREAR_R
    masterConfig.customMotorMixer[6].throttle = 1.0f;
    masterConfig.customMotorMixer[6].roll = -1.0f;
    masterConfig.customMotorMixer[6].pitch = 0.414178f;
    masterConfig.customMotorMixer[6].yaw = 1.0f;

    //  { 1.0f,  1.0f,  0.414178f, -1.0f },          // MIDREAR_L
    masterConfig.customMotorMixer[7].throttle = 1.0f;
    masterConfig.customMotorMixer[7].roll = 1.0f;
    masterConfig.customMotorMixer[7].pitch = 0.414178f;
    masterConfig.customMotorMixer[7].yaw = -1.0f;
#endif

    // copy first profile into remaining profile
    for (i = 1; i < MAX_PROFILE_COUNT; i++) {
        memcpy(&masterConfig.profile[i], currentProfile, sizeof(profile_t));
    }

    // copy first control rate config into remaining profile
    for (i = 1; i < MAX_CONTROL_RATE_PROFILE_COUNT; i++) {
        memcpy(&masterConfig.controlRateProfiles[i], currentControlRateProfile, sizeof(controlRateConfig_t));
    }

    for (i = 1; i < MAX_PROFILE_COUNT; i++) {
        masterConfig.profile[i].defaultRateProfileIndex = i % MAX_CONTROL_RATE_PROFILE_COUNT;
    }
}
示例#3
0
文件: config.c 项目: hrrr/cleanflight
// Default settings
void createDefaultConfig(master_t *config)
{
    // Clear all configuration
    memset(config, 0, sizeof(master_t));

    intFeatureClearAll(config);
    intFeatureSet(DEFAULT_RX_FEATURE | FEATURE_FAILSAFE , config);
#ifdef DEFAULT_FEATURES
    intFeatureSet(DEFAULT_FEATURES, config);
#endif

#ifdef OSD
    intFeatureSet(FEATURE_OSD, config);
    resetOsdConfig(&config->osdProfile);
#endif

#ifdef BOARD_HAS_VOLTAGE_DIVIDER
    // only enable the VBAT feature by default if the board has a voltage divider otherwise
    // the user may see incorrect readings and unexpected issues with pin mappings may occur.
    intFeatureSet(FEATURE_VBAT, config);
#endif

    config->version = EEPROM_CONF_VERSION;
    config->mixerMode = MIXER_QUADX;

    // global settings
    config->current_profile_index = 0;     // default profile
    config->dcm_kp = 2500;                // 1.0 * 10000
    config->dcm_ki = 0;                    // 0.003 * 10000
    config->gyro_lpf = 0;                 // 256HZ default
#ifdef STM32F10X
    config->gyro_sync_denom = 8;
    config->pid_process_denom = 1;
#elif defined(USE_GYRO_SPI_MPU6000) || defined(USE_GYRO_SPI_MPU6500)
    config->gyro_sync_denom = 1;
    config->pid_process_denom = 4;
#else
    config->gyro_sync_denom = 4;
    config->pid_process_denom = 2;
#endif
    config->gyro_soft_type = FILTER_PT1;
    config->gyro_soft_lpf_hz = 90;
    config->gyro_soft_notch_hz = 0;
    config->gyro_soft_notch_cutoff = 150;

    config->debug_mode = DEBUG_NONE;

    resetAccelerometerTrims(&config->accZero);

    resetSensorAlignment(&config->sensorAlignmentConfig);

    config->boardAlignment.rollDegrees = 0;
    config->boardAlignment.pitchDegrees = 0;
    config->boardAlignment.yawDegrees = 0;
    config->acc_hardware = ACC_DEFAULT;     // default/autodetect
    config->max_angle_inclination = 700;    // 70 degrees
    config->yaw_control_direction = 1;
    config->gyroConfig.gyroMovementCalibrationThreshold = 32;

    // xxx_hardware: 0:default/autodetect, 1: disable
    config->mag_hardware = 1;

    config->baro_hardware = 1;

    resetBatteryConfig(&config->batteryConfig);

#ifdef TELEMETRY
    resetTelemetryConfig(&config->telemetryConfig);
#endif

#ifdef SERIALRX_PROVIDER
    config->rxConfig.serialrx_provider = SERIALRX_PROVIDER;
#else
    config->rxConfig.serialrx_provider = 0;
#endif
    config->rxConfig.sbus_inversion = 1;
    config->rxConfig.spektrum_sat_bind = 0;
    config->rxConfig.spektrum_sat_bind_autoreset = 1;
    config->rxConfig.midrc = 1500;
    config->rxConfig.mincheck = 1100;
    config->rxConfig.maxcheck = 1900;
    config->rxConfig.rx_min_usec = 885;          // any of first 4 channels below this value will trigger rx loss detection
    config->rxConfig.rx_max_usec = 2115;         // any of first 4 channels above this value will trigger rx loss detection

    for (int i = 0; i < MAX_SUPPORTED_RC_CHANNEL_COUNT; i++) {
        rxFailsafeChannelConfiguration_t *channelFailsafeConfiguration = &config->rxConfig.failsafe_channel_configurations[i];
        channelFailsafeConfiguration->mode = (i < NON_AUX_CHANNEL_COUNT) ? RX_FAILSAFE_MODE_AUTO : RX_FAILSAFE_MODE_HOLD;
        channelFailsafeConfiguration->step = (i == THROTTLE) ? CHANNEL_VALUE_TO_RXFAIL_STEP(config->rxConfig.rx_min_usec) : CHANNEL_VALUE_TO_RXFAIL_STEP(config->rxConfig.midrc);
    }

    config->rxConfig.rssi_channel = 0;
    config->rxConfig.rssi_scale = RSSI_SCALE_DEFAULT;
    config->rxConfig.rssi_ppm_invert = 0;
    config->rxConfig.rcInterpolation = RC_SMOOTHING_AUTO;
    config->rxConfig.rcInterpolationInterval = 19;
    config->rxConfig.fpvCamAngleDegrees = 0;
    config->rxConfig.max_aux_channel = MAX_AUX_CHANNELS;
    config->rxConfig.airModeActivateThreshold = 1350;

    resetAllRxChannelRangeConfigurations(config->rxConfig.channelRanges);

    config->inputFilteringMode = INPUT_FILTERING_DISABLED;

    config->gyro_cal_on_first_arm = 0;  // TODO - Cleanup retarded arm support
    config->disarm_kill_switch = 1;
    config->auto_disarm_delay = 5;
    config->small_angle = 25;

    resetMixerConfig(&config->mixerConfig);

    config->airplaneConfig.fixedwing_althold_dir = 1;

    // Motor/ESC/Servo
    resetEscAndServoConfig(&config->escAndServoConfig);
    resetFlight3DConfig(&config->flight3DConfig);

#ifdef BRUSHED_MOTORS
    config->motor_pwm_rate = BRUSHED_MOTORS_PWM_RATE;
    config->motor_pwm_protocol = PWM_TYPE_BRUSHED;
    config->use_unsyncedPwm = true;
#else
    config->motor_pwm_rate = BRUSHLESS_MOTORS_PWM_RATE;
    config->motor_pwm_protocol = PWM_TYPE_ONESHOT125;
#endif

    config->servo_pwm_rate = 50;

#ifdef CC3D
    config->use_buzzer_p6 = 0;
#endif

#ifdef GPS
    // gps/nav stuff
    config->gpsConfig.provider = GPS_NMEA;
    config->gpsConfig.sbasMode = SBAS_AUTO;
    config->gpsConfig.autoConfig = GPS_AUTOCONFIG_ON;
    config->gpsConfig.autoBaud = GPS_AUTOBAUD_OFF;
#endif

    resetSerialConfig(&config->serialConfig);

    resetProfile(&config->profile[0]);

    resetRollAndPitchTrims(&config->accelerometerTrims);

    config->mag_declination = 0;
    config->acc_lpf_hz = 10.0f;
    config->accDeadband.xy = 40;
    config->accDeadband.z = 40;
    config->acc_unarmedcal = 1;

#ifdef BARO
    resetBarometerConfig(&config->barometerConfig);
#endif

    // Radio
#ifdef RX_CHANNELS_TAER
    parseRcChannels("TAER1234", &config->rxConfig);
#else
    parseRcChannels("AETR1234", &config->rxConfig);
#endif

    resetRcControlsConfig(&config->rcControlsConfig);

    config->throttle_correction_value = 0;      // could 10 with althold or 40 for fpv
    config->throttle_correction_angle = 800;    // could be 80.0 deg with atlhold or 45.0 for fpv

    // Failsafe Variables
    config->failsafeConfig.failsafe_delay = 10;                            // 1sec
    config->failsafeConfig.failsafe_off_delay = 10;                        // 1sec
    config->failsafeConfig.failsafe_throttle = 1000;                       // default throttle off.
    config->failsafeConfig.failsafe_kill_switch = 0;                       // default failsafe switch action is identical to rc link loss
    config->failsafeConfig.failsafe_throttle_low_delay = 100;              // default throttle low delay for "just disarm" on failsafe condition
    config->failsafeConfig.failsafe_procedure = FAILSAFE_PROCEDURE_DROP_IT;// default full failsafe procedure is 0: auto-landing

#ifdef USE_SERVOS
    // servos
    for (int i = 0; i < MAX_SUPPORTED_SERVOS; i++) {
        config->servoConf[i].min = DEFAULT_SERVO_MIN;
        config->servoConf[i].max = DEFAULT_SERVO_MAX;
        config->servoConf[i].middle = DEFAULT_SERVO_MIDDLE;
        config->servoConf[i].rate = 100;
        config->servoConf[i].angleAtMin = DEFAULT_SERVO_MIN_ANGLE;
        config->servoConf[i].angleAtMax = DEFAULT_SERVO_MAX_ANGLE;
        config->servoConf[i].forwardFromChannel = CHANNEL_FORWARDING_DISABLED;
    }

    // gimbal
    config->gimbalConfig.mode = GIMBAL_MODE_NORMAL;
#endif

#ifdef GPS
    resetGpsProfile(&config->gpsProfile);
#endif

    // custom mixer. clear by defaults.
    for (int i = 0; i < MAX_SUPPORTED_MOTORS; i++) {
        config->customMotorMixer[i].throttle = 0.0f;
    }

#ifdef LED_STRIP
    applyDefaultColors(config->colors);
    applyDefaultLedStripConfig(config->ledConfigs);
    applyDefaultModeColors(config->modeColors);
    applyDefaultSpecialColors(&(config->specialColors));
    config->ledstrip_visual_beeper = 0;
#endif

#ifdef VTX
    config->vtx_band = 4;    //Fatshark/Airwaves
    config->vtx_channel = 1; //CH1
    config->vtx_mode = 0;    //CH+BAND mode
    config->vtx_mhz = 5740;  //F0
#endif

#ifdef TRANSPONDER
    static const uint8_t defaultTransponderData[6] = { 0x12, 0x34, 0x56, 0x78, 0x9A, 0xBC }; // Note, this is NOT a valid transponder code, it's just for testing production hardware

    memcpy(config->transponderData, &defaultTransponderData, sizeof(defaultTransponderData));
#endif

#ifdef BLACKBOX
#if defined(ENABLE_BLACKBOX_LOGGING_ON_SPIFLASH_BY_DEFAULT)
    intFeatureSet(FEATURE_BLACKBOX, config);
    config->blackbox_device = BLACKBOX_DEVICE_FLASH;
#elif defined(ENABLE_BLACKBOX_LOGGING_ON_SDCARD_BY_DEFAULT)
    intFeatureSet(FEATURE_BLACKBOX, config);
    config->blackbox_device = BLACKBOX_DEVICE_SDCARD;
#else
    config->blackbox_device = BLACKBOX_DEVICE_SERIAL;
#endif

    config->blackbox_rate_num = 1;
    config->blackbox_rate_denom = 1;
    config->blackbox_on_motor_test = 0; // default off
#endif // BLACKBOX

#ifdef SERIALRX_UART
    if (featureConfigured(FEATURE_RX_SERIAL)) {
        config->serialConfig.portConfigs[SERIALRX_UART].functionMask = FUNCTION_RX_SERIAL;
    }
#endif

#if defined(TARGET_CONFIG)
    targetConfiguration(config);
#endif

   
    // copy first profile into remaining profile
    for (int i = 1; i < MAX_PROFILE_COUNT; i++) {
        memcpy(&config->profile[i], &config->profile[0], sizeof(profile_t));
    }
}