static int bcm_cygnus_config_init(struct phy_device *phydev)
{
int reg, rc;
reg = phy_read(phydev, MII_BCM54XX_ECR);
if (reg < 0)
return reg;
/* Mask interrupts globally. */
reg |= MII_BCM54XX_ECR_IM;
rc = phy_write(phydev, MII_BCM54XX_ECR, reg);
if (rc)
return rc;
/* Unmask events of interest */
reg = ~(MII_BCM54XX_INT_DUPLEX |
MII_BCM54XX_INT_SPEED |
MII_BCM54XX_INT_LINK);
rc = phy_write(phydev, MII_BCM54XX_IMR, reg);
if (rc)
return rc;
/* Apply AFE settings for the PHY */
rc = bcm_cygnus_afe_config(phydev);
if (rc)
return rc;
/* Advertise EEE */
rc = bcm_phy_enable_eee(phydev);
if (rc)
return rc;
/* Enable APD */
return bcm_phy_enable_apd(phydev, false);
}
static int bcm7xxx_28nm_config_init(struct phy_device *phydev)
{
u8 rev = PHY_BRCM_7XXX_REV(phydev->dev_flags);
u8 patch = PHY_BRCM_7XXX_PATCH(phydev->dev_flags);
u8 count;
int ret = 0;
/* Newer devices have moved the revision information back into a
* standard location in MII_PHYS_ID[23]
*/
if (rev == 0)
rev = phydev->phy_id & ~phydev->drv->phy_id_mask;
pr_info_once("%s: %s PHY revision: 0x%02x, patch: %d\n",
phydev_name(phydev), phydev->drv->name, rev, patch);
/* Dummy read to a register to workaround an issue upon reset where the
* internal inverter may not allow the first MDIO transaction to pass
* the MDIO management controller and make us return 0xffff for such
* reads.
*/
phy_read(phydev, MII_BMSR);
switch (rev) {
case 0xb0:
ret = bcm7xxx_28nm_b0_afe_config_init(phydev);
break;
case 0xd0:
ret = bcm7xxx_28nm_d0_afe_config_init(phydev);
break;
case 0xe0:
case 0xf0:
/* Rev G0 introduces a roll over */
case 0x10:
ret = bcm7xxx_28nm_e0_plus_afe_config_init(phydev);
break;
case 0x01:
ret = bcm7xxx_28nm_a0_patch_afe_config_init(phydev);
break;
default:
break;
}
if (ret)
return ret;
ret = bcm_phy_downshift_get(phydev, &count);
if (ret)
return ret;
/* Only enable EEE if Wirespeed/downshift is disabled */
ret = bcm_phy_set_eee(phydev, count == DOWNSHIFT_DEV_DISABLE);
if (ret)
return ret;
return bcm_phy_enable_apd(phydev, true);
}
static int bcm7xxx_28nm_config_init(struct phy_device *phydev)
{
u8 rev = PHY_BRCM_7XXX_REV(phydev->dev_flags);
u8 patch = PHY_BRCM_7XXX_PATCH(phydev->dev_flags);
int ret = 0;
pr_info_once("%s: %s PHY revision: 0x%02x, patch: %d\n",
phydev_name(phydev), phydev->drv->name, rev, patch);
/* Dummy read to a register to workaround an issue upon reset where the
* internal inverter may not allow the first MDIO transaction to pass
* the MDIO management controller and make us return 0xffff for such
* reads.
*/
phy_read(phydev, MII_BMSR);
switch (rev) {
case 0xb0:
ret = bcm7xxx_28nm_b0_afe_config_init(phydev);
break;
case 0xd0:
ret = bcm7xxx_28nm_d0_afe_config_init(phydev);
break;
case 0xe0:
case 0xf0:
/* Rev G0 introduces a roll over */
case 0x10:
ret = bcm7xxx_28nm_e0_plus_afe_config_init(phydev);
break;
default:
break;
}
if (ret)
return ret;
ret = bcm_phy_enable_eee(phydev);
if (ret)
return ret;
return bcm_phy_enable_apd(phydev, true);
}
