static void mirror_start_job(BlockDriverState *bs, BlockDriverState *target,
const char *replaces,
int64_t speed, int64_t granularity,
int64_t buf_size,
BlockdevOnError on_source_error,
BlockdevOnError on_target_error,
BlockDriverCompletionFunc *cb,
void *opaque, Error **errp,
const BlockJobDriver *driver,
bool is_none_mode, BlockDriverState *base)
{
MirrorBlockJob *s;
if (granularity == 0) {
/* Choose the default granularity based on the target file's cluster
* size, clamped between 4k and 64k. */
BlockDriverInfo bdi;
if (bdrv_get_info(target, &bdi) >= 0 && bdi.cluster_size != 0) {
granularity = MAX(4096, bdi.cluster_size);
granularity = MIN(65536, granularity);
} else {
granularity = 65536;
}
}
assert ((granularity & (granularity - 1)) == 0);
if ((on_source_error == BLOCKDEV_ON_ERROR_STOP ||
on_source_error == BLOCKDEV_ON_ERROR_ENOSPC) &&
!bdrv_iostatus_is_enabled(bs)) {
error_set(errp, QERR_INVALID_PARAMETER, "on-source-error");
return;
}
s = block_job_create(driver, bs, speed, cb, opaque, errp);
if (!s) {
return;
}
s->replaces = g_strdup(replaces);
s->on_source_error = on_source_error;
s->on_target_error = on_target_error;
s->target = target;
s->is_none_mode = is_none_mode;
s->base = base;
s->granularity = granularity;
s->buf_size = MAX(buf_size, granularity);
s->dirty_bitmap = bdrv_create_dirty_bitmap(bs, granularity, errp);
if (!s->dirty_bitmap) {
return;
}
bdrv_set_enable_write_cache(s->target, true);
bdrv_set_on_error(s->target, on_target_error, on_target_error);
bdrv_iostatus_enable(s->target);
s->common.co = qemu_coroutine_create(mirror_run);
trace_mirror_start(bs, s, s->common.co, opaque);
qemu_coroutine_enter(s->common.co, s);
}
static void virtio_blk_device_realize(DeviceState *dev, Error **errp)
{
VirtIODevice *vdev = VIRTIO_DEVICE(dev);
VirtIOBlock *s = VIRTIO_BLK(dev);
VirtIOBlkConf *blk = &(s->blk);
#ifdef CONFIG_VIRTIO_BLK_DATA_PLANE
Error *err = NULL;
#endif
static int virtio_blk_id;
if (!blk->conf.bs) {
error_setg(errp, "drive property not set");
return;
}
if (!bdrv_is_inserted(blk->conf.bs)) {
error_setg(errp, "Device needs media, but drive is empty");
return;
}
blkconf_serial(&blk->conf, &blk->serial);
s->original_wce = bdrv_enable_write_cache(blk->conf.bs);
if (blkconf_geometry(&blk->conf, NULL, 65535, 255, 255) < 0) {
error_setg(errp, "Error setting geometry");
return;
}
virtio_init(vdev, "virtio-blk", VIRTIO_ID_BLOCK,
sizeof(struct virtio_blk_config));
s->bs = blk->conf.bs;
s->conf = &blk->conf;
s->rq = NULL;
s->sector_mask = (s->conf->logical_block_size / BDRV_SECTOR_SIZE) - 1;
s->vq = virtio_add_queue(vdev, 128, virtio_blk_handle_output);
s->complete_request = virtio_blk_complete_request;
#ifdef CONFIG_VIRTIO_BLK_DATA_PLANE
virtio_blk_data_plane_create(vdev, blk, &s->dataplane, &err);
if (err != NULL) {
error_propagate(errp, err);
virtio_cleanup(vdev);
return;
}
s->migration_state_notifier.notify = virtio_blk_migration_state_changed;
add_migration_state_change_notifier(&s->migration_state_notifier);
#endif
s->change = qemu_add_vm_change_state_handler(virtio_blk_dma_restart_cb, s);
register_savevm(dev, "virtio-blk", virtio_blk_id++, 2,
virtio_blk_save, virtio_blk_load, s);
bdrv_set_dev_ops(s->bs, &virtio_block_ops, s);
bdrv_set_guest_block_size(s->bs, s->conf->logical_block_size);
bdrv_iostatus_enable(s->bs);
add_boot_device_path(s->conf->bootindex, dev, "/disk@0,0");
}
static int virtio_blk_device_init(VirtIODevice *vdev)
{
DeviceState *qdev = DEVICE(vdev);
VirtIOBlock *s = VIRTIO_BLK(vdev);
VirtIOBlkConf *blk = &(s->blk);
static int virtio_blk_id;
if (!blk->conf.bs) {
error_report("drive property not set");
return -1;
}
if (!bdrv_is_inserted(blk->conf.bs)) {
error_report("Device needs media, but drive is empty");
return -1;
}
blkconf_serial(&blk->conf, &blk->serial);
if (blkconf_geometry(&blk->conf, NULL, 65535, 255, 255) < 0) {
return -1;
}
virtio_init(vdev, "virtio-blk", VIRTIO_ID_BLOCK,
sizeof(struct virtio_blk_config));
vdev->get_config = virtio_blk_update_config;
vdev->set_config = virtio_blk_set_config;
vdev->get_features = virtio_blk_get_features;
vdev->set_status = virtio_blk_set_status;
vdev->reset = virtio_blk_reset;
s->bs = blk->conf.bs;
s->conf = &blk->conf;
memcpy(&(s->blk), blk, sizeof(struct VirtIOBlkConf));
s->rq = NULL;
s->sector_mask = (s->conf->logical_block_size / BDRV_SECTOR_SIZE) - 1;
s->vq = virtio_add_queue(vdev, 128, virtio_blk_handle_output);
#ifdef CONFIG_VIRTIO_BLK_DATA_PLANE
if (!virtio_blk_data_plane_create(vdev, blk, &s->dataplane)) {
virtio_common_cleanup(vdev);
return -1;
}
#endif
s->change = qemu_add_vm_change_state_handler(virtio_blk_dma_restart_cb, s);
register_savevm(qdev, "virtio-blk", virtio_blk_id++, 2,
virtio_blk_save, virtio_blk_load, s);
bdrv_set_dev_ops(s->bs, &virtio_block_ops, s);
bdrv_set_buffer_alignment(s->bs, s->conf->logical_block_size);
bdrv_iostatus_enable(s->bs);
add_boot_device_path(s->conf->bootindex, qdev, "/disk@0,0");
return 0;
}
VirtIODevice *virtio_blk_init(DeviceState *dev, BlockConf *conf,
char **serial)
{
VirtIOBlock *s;
int cylinders, heads, secs;
static int virtio_blk_id;
DriveInfo *dinfo;
if (!conf->bs) {
error_report("drive property not set");
return NULL;
}
if (!bdrv_is_inserted(conf->bs)) {
error_report("Device needs media, but drive is empty");
return NULL;
}
if (!*serial) {
/* try to fall back to value set with legacy -drive serial=... */
dinfo = drive_get_by_blockdev(conf->bs);
if (*dinfo->serial) {
*serial = strdup(dinfo->serial);
}
}
s = (VirtIOBlock *)virtio_common_init("virtio-blk", VIRTIO_ID_BLOCK,
sizeof(struct virtio_blk_config),
sizeof(VirtIOBlock));
s->vdev.get_config = virtio_blk_update_config;
s->vdev.get_features = virtio_blk_get_features;
s->vdev.reset = virtio_blk_reset;
s->bs = conf->bs;
s->conf = conf;
s->serial = *serial;
s->rq = NULL;
s->sector_mask = (s->conf->logical_block_size / BDRV_SECTOR_SIZE) - 1;
bdrv_guess_geometry(s->bs, &cylinders, &heads, &secs);
s->vq = virtio_add_queue(&s->vdev, 128, virtio_blk_handle_output);
qemu_add_vm_change_state_handler(virtio_blk_dma_restart_cb, s);
s->qdev = dev;
register_savevm(dev, "virtio-blk", virtio_blk_id++, 2,
virtio_blk_save, virtio_blk_load, s);
bdrv_set_dev_ops(s->bs, &virtio_block_ops, s);
bdrv_set_buffer_alignment(s->bs, conf->logical_block_size);
bdrv_iostatus_enable(s->bs);
add_boot_device_path(conf->bootindex, dev, "/disk@0,0");
return &s->vdev;
}
static void mirror_start_job(BlockDriverState *bs, BlockDriverState *target,
const char *replaces,
int64_t speed, uint32_t granularity,
int64_t buf_size,
BlockdevOnError on_source_error,
BlockdevOnError on_target_error,
BlockCompletionFunc *cb,
void *opaque, Error **errp,
const BlockJobDriver *driver,
bool is_none_mode, BlockDriverState *base)
{
MirrorBlockJob *s;
if (granularity == 0) {
granularity = bdrv_get_default_bitmap_granularity(target);
}
assert ((granularity & (granularity - 1)) == 0);
if ((on_source_error == BLOCKDEV_ON_ERROR_STOP ||
on_source_error == BLOCKDEV_ON_ERROR_ENOSPC) &&
!bdrv_iostatus_is_enabled(bs)) {
error_setg(errp, QERR_INVALID_PARAMETER, "on-source-error");
return;
}
s = block_job_create(driver, bs, speed, cb, opaque, errp);
if (!s) {
return;
}
s->replaces = g_strdup(replaces);
s->on_source_error = on_source_error;
s->on_target_error = on_target_error;
s->target = target;
s->is_none_mode = is_none_mode;
s->base = base;
s->granularity = granularity;
s->buf_size = MAX(buf_size, granularity);
s->dirty_bitmap = bdrv_create_dirty_bitmap(bs, granularity, NULL, errp);
if (!s->dirty_bitmap) {
return;
}
bdrv_set_enable_write_cache(s->target, true);
bdrv_set_on_error(s->target, on_target_error, on_target_error);
bdrv_iostatus_enable(s->target);
s->common.co = qemu_coroutine_create(mirror_run);
trace_mirror_start(bs, s, s->common.co, opaque);
qemu_coroutine_enter(s->common.co, s);
}
VirtIODevice *virtio_blk_init(DeviceState *dev, VirtIOBlkConf *blk)
{
VirtIOBlock *s;
static int virtio_blk_id;
if (!blk->conf.bs) {
error_report("drive property not set");
return NULL;
}
if (!bdrv_is_inserted(blk->conf.bs)) {
error_report("Device needs media, but drive is empty");
return NULL;
}
blkconf_serial(&blk->conf, &blk->serial);
if (blkconf_geometry(&blk->conf, NULL, 65535, 255, 255) < 0) {
return NULL;
}
s = (VirtIOBlock *)virtio_common_init("virtio-blk", VIRTIO_ID_BLOCK,
sizeof(struct virtio_blk_config),
sizeof(VirtIOBlock));
s->vdev.get_config = virtio_blk_update_config;
s->vdev.set_config = virtio_blk_set_config;
s->vdev.get_features = virtio_blk_get_features;
s->vdev.set_status = virtio_blk_set_status;
s->vdev.reset = virtio_blk_reset;
s->bs = blk->conf.bs;
s->conf = &blk->conf;
s->blk = blk;
s->rq = NULL;
s->sector_mask = (s->conf->logical_block_size / BDRV_SECTOR_SIZE) - 1;
s->vq = virtio_add_queue(&s->vdev, 128, virtio_blk_handle_output);
qemu_add_vm_change_state_handler(virtio_blk_dma_restart_cb, s);
s->qdev = dev;
register_savevm(dev, "virtio-blk", virtio_blk_id++, 2,
virtio_blk_save, virtio_blk_load, s);
bdrv_set_dev_ops(s->bs, &virtio_block_ops, s);
bdrv_set_buffer_alignment(s->bs, s->conf->logical_block_size);
bdrv_iostatus_enable(s->bs);
add_boot_device_path(s->conf->bootindex, dev, "/disk@0,0");
return &s->vdev;
}
VirtIODevice *virtio_blk_init(DeviceState *dev, VirtIOBlkConf *blk)
{
VirtIOBlock *s;
int cylinders, heads, secs;
static int virtio_blk_id;
DriveInfo *dinfo;
if (!blk->conf.bs) {
error_report("drive property not set");
return NULL;
}
if (!bdrv_is_inserted(blk->conf.bs)) {
error_report("Device needs media, but drive is empty");
return NULL;
}
if (!blk->serial) {
/* try to fall back to value set with legacy -drive serial=... */
dinfo = drive_get_by_blockdev(blk->conf.bs);
if (*dinfo->serial) {
blk->serial = strdup(dinfo->serial);
}
}
s = (VirtIOBlock *)virtio_common_init("virtio-blk", VIRTIO_ID_BLOCK,
sizeof(struct virtio_blk_config),
sizeof(VirtIOBlock));
s->vdev.get_config = virtio_blk_update_config;
s->vdev.get_features = virtio_blk_get_features;
#ifdef CONFIG_VIRTIO_BLK_DATA_PLANE
s->vdev.set_status = virtio_blk_set_status;
#endif
s->vdev.reset = virtio_blk_reset;
s->bs = blk->conf.bs;
s->conf = &blk->conf;
s->blk = blk;
s->rq = NULL;
s->sector_mask = (s->conf->logical_block_size / 512) - 1;
bdrv_guess_geometry(s->bs, &cylinders, &heads, &secs);
bdrv_set_geometry_hint(s->bs, cylinders, heads, secs);
s->vq = virtio_add_queue(&s->vdev, 128, virtio_blk_handle_output);
#ifdef CONFIG_VIRTIO_BLK_DATA_PLANE
if (!virtio_blk_data_plane_create(&s->vdev, blk, &s->dataplane)) {
virtio_cleanup(&s->vdev);
return NULL;
}
#endif
s->change = qemu_add_vm_change_state_handler(virtio_blk_dma_restart_cb, s);
s->qdev = dev;
register_savevm(dev, "virtio-blk", virtio_blk_id++, 2,
virtio_blk_save, virtio_blk_load, s);
#ifdef CONFIG_VIRTIO_BLK_DATA_PLANE
if (s->dataplane) {
register_device_unmigratable(dev, "virtio-blk", s);
}
#endif
bdrv_set_dev_ops(s->bs, &virtio_block_ops, s);
s->bs->buffer_alignment = s->conf->logical_block_size;
bdrv_iostatus_enable(s->bs);
add_boot_device_path(s->conf->bootindex, dev, "/disk@0,0");
return &s->vdev;
}