static void
be_self_test(struct net_device *netdev, struct ethtool_test *test, u64 *data)
{
struct be_adapter *adapter = netdev_priv(netdev);
bool link_up;
u8 mac_speed = 0;
u16 qos_link_speed = 0;
memset(data, 0, sizeof(u64) * ETHTOOL_TESTS_NUM);
if (test->flags & ETH_TEST_FL_OFFLINE) {
if (be_loopback_test(adapter, BE_MAC_LOOPBACK,
&data[0]) != 0) {
test->flags |= ETH_TEST_FL_FAILED;
}
if (be_loopback_test(adapter, BE_PHY_LOOPBACK,
&data[1]) != 0) {
test->flags |= ETH_TEST_FL_FAILED;
}
if (be_loopback_test(adapter, BE_ONE_PORT_EXT_LOOPBACK,
&data[2]) != 0) {
test->flags |= ETH_TEST_FL_FAILED;
}
}
if (be_test_ddr_dma(adapter) != 0) {
data[3] = 1;
test->flags |= ETH_TEST_FL_FAILED;
}
if (be_cmd_link_status_query(adapter, &link_up, &mac_speed,
&qos_link_speed) != 0) {
test->flags |= ETH_TEST_FL_FAILED;
data[4] = -1;
} else if (mac_speed) {
data[4] = 1;
}
}
static void be_link_status_update(struct be_adapter *adapter)
{
struct be_link_info *prev = &adapter->link;
struct be_link_info now = { 0 };
struct net_device *netdev = adapter->netdev;
be_cmd_link_status_query(&adapter->ctrl, &now);
/* If link came up or went down */
if (now.speed != prev->speed && (now.speed == PHY_LINK_SPEED_ZERO ||
prev->speed == PHY_LINK_SPEED_ZERO)) {
if (now.speed == PHY_LINK_SPEED_ZERO) {
netif_stop_queue(netdev);
netif_carrier_off(netdev);
printk(KERN_INFO "%s: Link down\n", netdev->name);
} else {
netif_start_queue(netdev);
netif_carrier_on(netdev);
printk(KERN_INFO "%s: Link up\n", netdev->name);
}
}
*prev = now;
}
static int be_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
{
struct be_adapter *adapter = netdev_priv(netdev);
struct be_dma_mem phy_cmd;
struct be_cmd_resp_get_phy_info *resp;
u8 mac_speed = 0;
u16 link_speed = 0;
bool link_up = false;
int status;
u16 intf_type;
if ((adapter->link_speed < 0) || (!(netdev->flags & IFF_UP))) {
status = be_cmd_link_status_query(adapter, &link_up,
&mac_speed, &link_speed);
be_link_status_update(adapter, link_up);
/* link_speed is in units of 10 Mbps */
if (link_speed) {
ecmd->speed = link_speed*10;
} else {
switch (mac_speed) {
case PHY_LINK_SPEED_1GBPS:
ecmd->speed = SPEED_1000;
break;
case PHY_LINK_SPEED_10GBPS:
ecmd->speed = SPEED_10000;
break;
}
}
phy_cmd.size = sizeof(struct be_cmd_req_get_phy_info);
phy_cmd.va = pci_alloc_consistent(adapter->pdev, phy_cmd.size,
&phy_cmd.dma);
if (!phy_cmd.va) {
dev_err(&adapter->pdev->dev, "Memory alloc failure\n");
return -ENOMEM;
}
status = be_cmd_get_phy_info(adapter, &phy_cmd);
if (!status) {
resp = (struct be_cmd_resp_get_phy_info *) phy_cmd.va;
intf_type = le16_to_cpu(resp->interface_type);
switch (intf_type) {
case PHY_TYPE_XFP_10GB:
case PHY_TYPE_SFP_1GB:
case PHY_TYPE_SFP_PLUS_10GB:
ecmd->port = PORT_FIBRE;
break;
default:
ecmd->port = PORT_TP;
break;
}
switch (intf_type) {
case PHY_TYPE_KR_10GB:
case PHY_TYPE_KX4_10GB:
ecmd->autoneg = AUTONEG_ENABLE;
ecmd->transceiver = XCVR_INTERNAL;
break;
default:
ecmd->autoneg = AUTONEG_DISABLE;
ecmd->transceiver = XCVR_EXTERNAL;
break;
}
}
/* Save for future use */
adapter->link_speed = ecmd->speed;
adapter->port_type = ecmd->port;
adapter->transceiver = ecmd->transceiver;
adapter->autoneg = ecmd->autoneg;
pci_free_consistent(adapter->pdev, phy_cmd.size,
phy_cmd.va, phy_cmd.dma);
} else {
ecmd->speed = adapter->link_speed;
ecmd->port = adapter->port_type;
ecmd->transceiver = adapter->transceiver;
ecmd->autoneg = adapter->autoneg;
}
ecmd->duplex = DUPLEX_FULL;
ecmd->phy_address = adapter->port_num;
switch (ecmd->port) {
case PORT_FIBRE:
ecmd->supported = (SUPPORTED_10000baseT_Full | SUPPORTED_FIBRE);
break;
case PORT_TP:
ecmd->supported = (SUPPORTED_10000baseT_Full | SUPPORTED_TP);
break;
case PORT_AUI:
ecmd->supported = (SUPPORTED_10000baseT_Full | SUPPORTED_AUI);
break;
}
if (ecmd->autoneg) {
ecmd->supported |= SUPPORTED_1000baseT_Full;
ecmd->supported |= SUPPORTED_Autoneg;
ecmd->advertising |= (ADVERTISED_10000baseT_Full |
ADVERTISED_1000baseT_Full);
}
return 0;
}
static int be_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
{
struct be_adapter *adapter = netdev_priv(netdev);
u8 mac_speed = 0, connector = 0;
u16 link_speed = 0;
bool link_up = false;
int status;
if (adapter->link_speed < 0) {
status = be_cmd_link_status_query(adapter, &link_up,
&mac_speed, &link_speed);
/* link_speed is in units of 10 Mbps */
if (link_speed) {
ecmd->speed = link_speed*10;
} else {
switch (mac_speed) {
case PHY_LINK_SPEED_1GBPS:
ecmd->speed = SPEED_1000;
break;
case PHY_LINK_SPEED_10GBPS:
ecmd->speed = SPEED_10000;
break;
}
}
status = be_cmd_read_port_type(adapter, adapter->port_num,
&connector);
if (!status) {
switch (connector) {
case 7:
ecmd->port = PORT_FIBRE;
ecmd->transceiver = XCVR_EXTERNAL;
break;
case 0:
ecmd->port = PORT_TP;
ecmd->transceiver = XCVR_EXTERNAL;
break;
default:
ecmd->port = PORT_TP;
ecmd->transceiver = XCVR_INTERNAL;
break;
}
} else {
ecmd->port = PORT_AUI;
ecmd->transceiver = XCVR_INTERNAL;
}
/* Save for future use */
adapter->link_speed = ecmd->speed;
adapter->port_type = ecmd->port;
adapter->transceiver = ecmd->transceiver;
} else {
ecmd->speed = adapter->link_speed;
ecmd->port = adapter->port_type;
ecmd->transceiver = adapter->transceiver;
}
ecmd->duplex = DUPLEX_FULL;
ecmd->autoneg = AUTONEG_DISABLE;
ecmd->phy_address = adapter->port_num;
switch (ecmd->port) {
case PORT_FIBRE:
ecmd->supported = (SUPPORTED_10000baseT_Full | SUPPORTED_FIBRE);
break;
case PORT_TP:
ecmd->supported = (SUPPORTED_10000baseT_Full | SUPPORTED_TP);
break;
case PORT_AUI:
ecmd->supported = (SUPPORTED_10000baseT_Full | SUPPORTED_AUI);
break;
}
return 0;
}
