/**
* BLE test task
*
* @param arg
*/
void
bletest_task_handler(void *arg)
{
int rc;
uint64_t event_mask;
struct os_event *ev;
struct os_callout_func *cf;
/* Set LED blink rate */
g_bletest_led_rate = OS_TICKS_PER_SEC / 20;
/* Wait one second before starting test task */
os_time_delay(OS_TICKS_PER_SEC);
/* Initialize eventq */
os_eventq_init(&g_bletest_evq);
/* Initialize the host timer */
os_callout_func_init(&g_bletest_timer, &g_bletest_evq, bletest_timer_cb,
NULL);
/* Send the reset command first */
rc = host_hci_cmd_send(BLE_HCI_OGF_CTLR_BASEBAND, BLE_HCI_OCF_CB_RESET,
0, NULL);
assert(rc == 0);
host_hci_outstanding_opcode = 0;
#if (BLETEST_CFG_ROLE == BLETEST_ROLE_ADVERTISER)
/* Initialize the advertiser */
console_printf("Starting BLE test task as advertiser\n");
bletest_init_advertising();
#endif
#if (BLETEST_CFG_ROLE == BLETEST_ROLE_SCANNER)
/* Initialize the scanner */
console_printf("Starting BLE test task as scanner\n");
bletest_init_scanner();
#endif
#if (BLETEST_CFG_ROLE == BLETEST_ROLE_INITIATOR)
/* Initialize the scanner */
console_printf("Starting BLE test task as initiator\n");
bletest_init_initiator();
#endif
/* Set the event mask we want to display */
event_mask = 0x7FF;
rc = host_hci_cmd_le_set_event_mask(event_mask);
assert(rc == 0);
host_hci_outstanding_opcode = 0;
/* Turn on all events */
event_mask = 0xffffffffffffffff;
rc = host_hci_cmd_set_event_mask(event_mask);
assert(rc == 0);
host_hci_outstanding_opcode = 0;
/* Turn on all events */
rc = host_hci_cmd_rd_local_version();
assert(rc == 0);
host_hci_outstanding_opcode = 0;
/* Wait some time before starting */
os_time_delay(OS_TICKS_PER_SEC);
/* Init bletest variables */
g_bletest_state = 0;
g_next_os_time = os_time_get();
/* Begin advertising if we are an advertiser */
#if (BLETEST_CFG_ROLE == BLETEST_ROLE_ADVERTISER)
rc = host_hci_cmd_le_set_adv_enable(1);
assert(rc == 0);
host_hci_outstanding_opcode = 0;
#endif
bletest_timer_cb(NULL);
while (1) {
ev = os_eventq_get(&g_bletest_evq);
switch (ev->ev_type) {
case OS_EVENT_T_TIMER:
cf = (struct os_callout_func *)ev;
assert(cf->cf_func);
cf->cf_func(cf->cf_arg);
break;
default:
assert(0);
break;
}
}
}
/**
* BLE test task
*
* @param arg
*/
void
bletest_task_handler(void *arg)
{
int rc;
uint64_t rand64;
uint64_t event_mask;
/* Set LED blink rate */
g_bletest_led_rate = OS_TICKS_PER_SEC / 20;
/* Wait one second before starting test task */
os_time_delay(OS_TICKS_PER_SEC);
/* Initialize the host timer */
os_callout_init(&g_bletest_timer, &g_bletest_evq, bletest_timer_cb,
NULL);
ble_hs_dbg_set_sync_state(BLE_HS_SYNC_STATE_GOOD);
/* Send the reset command first */
rc = bletest_hci_reset_ctlr();
assert(rc == 0);
#if (BLETEST_CFG_ROLE == BLETEST_ROLE_ADVERTISER)
/* Initialize the advertiser */
console_printf("Starting BLE test task as advertiser\n");
#if MYNEWT_VAL(BLE_ANDROID_MULTI_ADV_SUPPORT)
/* Start up all advertising instances except default one */
bletest_init_adv_instances();
/* Start advertising on instance 0 at 0 dbm */
bletest_init_advertising(0, 0);
#else
bletest_init_advertising();
#endif
#endif
#if (BLETEST_CFG_ROLE == BLETEST_ROLE_SCANNER)
/* Initialize the scanner */
console_printf("Starting BLE test task as scanner\n");
bletest_init_scanner();
#endif
#if (BLETEST_CFG_ROLE == BLETEST_ROLE_INITIATOR)
/* Initialize the scanner */
console_printf("Starting BLE test task as initiator\n");
bletest_init_initiator();
#endif
/* Read unique HW id */
rc = hal_bsp_hw_id((void *)&g_bletest_hw_id[0], sizeof(g_bletest_hw_id));
assert(rc == 16);
console_printf("HW id=%04x%04x%04x%04x\n",
(unsigned int)g_bletest_hw_id[0],
(unsigned int)g_bletest_hw_id[1],
(unsigned int)g_bletest_hw_id[2],
(unsigned int)g_bletest_hw_id[3]);
/* Set the event mask we want to display */
event_mask = 0x7FF;
rc = bletest_hci_le_set_event_mask(event_mask);
assert(rc == 0);
/* Turn on all events */
event_mask = 0xffffffffffffffff;
rc = bletest_hci_set_event_mask(event_mask);
assert(rc == 0);
/* Read device address */
rc = bletest_hci_rd_bd_addr();
assert(rc == 0);
/* Read local features */
rc = bletest_hci_rd_local_feat();
assert(rc == 0);
/* Read local commands */
rc = bletest_hci_rd_local_supp_cmd();
assert(rc == 0);
/* Read version */
rc = bletest_hci_rd_local_version();
assert(rc == 0);
/* Read supported states */
rc = bletest_hci_le_read_supp_states();
assert(rc == 0);
/* Read maximum data length */
rc = bletest_hci_le_rd_max_datalen();
assert(rc == 0);
#if (MYNEWT_VAL(BLE_LL_CFG_FEAT_DATA_LEN_EXT) == 1)
/* Read suggested data length */
rc = bletest_hci_le_rd_sugg_datalen();
assert(rc == 0);
/* write suggested default data length */
rc = bletest_hci_le_write_sugg_datalen(BLETEST_CFG_SUGG_DEF_TXOCTETS,
BLETEST_CFG_SUGG_DEF_TXTIME);
assert(rc == 0);
/* Read suggested data length */
rc = bletest_hci_le_rd_sugg_datalen();
assert(rc == 0);
/* Set data length (note: we know there is no connection; just a test) */
rc = bletest_hci_le_set_datalen(0x1234, BLETEST_CFG_SUGG_DEF_TXOCTETS,
BLETEST_CFG_SUGG_DEF_TXTIME);
assert(rc != 0);
#endif
/* Encrypt a block */
#if (MYNEWT_VAL(BLE_LL_CFG_FEAT_LE_ENCRYPTION) == 1)
rc = bletest_hci_le_encrypt((uint8_t *)g_ble_ll_encrypt_test_key,
(uint8_t *)g_ble_ll_encrypt_test_plain_text);
assert(rc == 0);
#endif
/* Get a random number */
rc = ble_hs_hci_util_rand(&rand64, 8);
assert(rc == 0);
/* Wait some time before starting */
os_time_delay(OS_TICKS_PER_SEC);
/* Init state */
g_bletest_state = 0;
/* Begin advertising if we are an advertiser */
#if (BLETEST_CFG_ROLE == BLETEST_ROLE_ADVERTISER)
#if MYNEWT_VAL(BLE_ANDROID_MULTI_ADV_SUPPORT)
rc = bletest_hci_le_set_multi_adv_enable(1, 0);
assert(rc == 0);
#else
rc = bletest_hci_le_set_adv_enable(1);
assert(rc == 0);
#endif
#endif
bletest_timer_cb(NULL);
while (1) {
os_eventq_run(&g_bletest_evq);
}
}
