void hpfs_prefetch_sectors(struct super_block *s, unsigned secno, int n)
{
struct buffer_head *bh;
struct blk_plug plug;
if (n <= 0 || unlikely(secno >= hpfs_sb(s)->sb_fs_size))
return;
bh = sb_find_get_block(s, secno);
if (bh) {
if (buffer_uptodate(bh)) {
brelse(bh);
return;
}
brelse(bh);
};
blk_start_plug(&plug);
while (n > 0) {
if (unlikely(secno >= hpfs_sb(s)->sb_fs_size))
break;
sb_breadahead(s, secno);
secno++;
n--;
}
blk_finish_plug(&plug);
}
/*
* Loop over all clusters in a chunk for a given incore inode allocation btree
* record. Do a readahead if there are any allocated inodes in that cluster.
*/
STATIC void
xfs_bulkstat_ichunk_ra(
struct xfs_mount *mp,
xfs_agnumber_t agno,
struct xfs_inobt_rec_incore *irec)
{
xfs_agblock_t agbno;
struct blk_plug plug;
int blks_per_cluster;
int inodes_per_cluster;
int i; /* inode chunk index */
agbno = XFS_AGINO_TO_AGBNO(mp, irec->ir_startino);
blks_per_cluster = xfs_icluster_size_fsb(mp);
inodes_per_cluster = blks_per_cluster << mp->m_sb.sb_inopblog;
blk_start_plug(&plug);
for (i = 0; i < XFS_INODES_PER_CHUNK;
i += inodes_per_cluster, agbno += blks_per_cluster) {
if (xfs_inobt_maskn(i, inodes_per_cluster) & ~irec->ir_free) {
xfs_btree_reada_bufs(mp, agno, agbno, blks_per_cluster,
&xfs_inode_buf_ops);
}
}
blk_finish_plug(&plug);
}
/**
* swapin_readahead - swap in pages in hope we need them soon
* @entry: swap entry of this memory
* @gfp_mask: memory allocation flags
* @vma: user vma this address belongs to
* @addr: target address for mempolicy
*
* Returns the struct page for entry and addr, after queueing swapin.
*
* Primitive swap readahead code. We simply read an aligned block of
* (1 << page_cluster) entries in the swap area. This method is chosen
* because it doesn't cost us any seek time. We also make sure to queue
* the 'original' request together with the readahead ones...
*
* This has been extended to use the NUMA policies from the mm triggering
* the readahead.
*
* Caller must hold down_read on the vma->vm_mm if vma is not NULL.
*/
struct page *swapin_readahead(swp_entry_t entry, gfp_t gfp_mask,
struct vm_area_struct *vma, unsigned long addr)
{
#ifdef CONFIG_SWAP_ENABLE_READAHEAD
struct page *page;
unsigned long offset = swp_offset(entry);
unsigned long start_offset, end_offset;
unsigned long mask = (1UL << page_cluster) - 1;
struct blk_plug plug;
/* Read a page_cluster sized and aligned cluster around offset. */
start_offset = offset & ~mask;
end_offset = offset | mask;
if (!start_offset) /* First page is swap header. */
start_offset++;
blk_start_plug(&plug);
for (offset = start_offset; offset <= end_offset ; offset++) {
/* Ok, do the async read-ahead now */
page = read_swap_cache_async(swp_entry(swp_type(entry), offset),
gfp_mask, vma, addr);
if (!page)
continue;
page_cache_release(page);
}
blk_finish_plug(&plug);
lru_add_drain(); /* Push any new pages onto the LRU now */
#endif /* CONFIG_SWAP_ENABLE_READAHEAD */
return read_swap_cache_async(entry, gfp_mask, vma, addr);
}
/*
* Almost copy of generic_file_aio_write() (added changed_begin/end,
* tux3_iattrdirty()).
*/
static ssize_t tux3_file_aio_write(struct kiocb *iocb, const struct iovec *iov,
unsigned long nr_segs, loff_t pos)
{
if(DEBUG_MODE_K==1)
{
printk(KERN_INFO"%25s %25s %4d #in\n",__FILE__,__func__,__LINE__);
}
struct file *file = iocb->ki_filp;
struct inode *inode = file->f_mapping->host;
struct sb *sb = tux_sb(inode->i_sb);
struct blk_plug plug;
ssize_t ret;
BUG_ON(iocb->ki_pos != pos);
mutex_lock(&inode->i_mutex);
blk_start_plug(&plug);
/* For each ->write_end() calls change_end(). */
change_begin(sb);
/* For timestamp. FIXME: convert this to ->update_time handler? */
tux3_iattrdirty(inode);
ret = __generic_file_aio_write(iocb, iov, nr_segs, &iocb->ki_pos);
change_end_if_needed(sb);
mutex_unlock(&inode->i_mutex);
if (ret > 0 || ret == -EIOCBQUEUED) {
ssize_t err;
err = generic_write_sync(file, pos, ret);
if (err < 0 && ret > 0)
ret = err;
}
blk_finish_plug(&plug);
return ret;
}
static void iblock_submit_bios(struct bio_list *list, int rw)
{
struct blk_plug plug;
struct bio *bio;
blk_start_plug(&plug);
while ((bio = bio_list_pop(list)))
submit_bio(rw, bio);
blk_finish_plug(&plug);
}
/**
* blkdev_reset_zones - Reset zones write pointer
* @bdev: Target block device
* @sector: Start sector of the first zone to reset
* @nr_sectors: Number of sectors, at least the length of one zone
* @gfp_mask: Memory allocation flags (for bio_alloc)
*
* Description:
* Reset the write pointer of the zones contained in the range
* @sector..@sector+@nr_sectors. Specifying the entire disk sector range
* is valid, but the specified range should not contain conventional zones.
*/
int blkdev_reset_zones(struct block_device *bdev,
sector_t sector, sector_t nr_sectors,
gfp_t gfp_mask)
{
struct request_queue *q = bdev_get_queue(bdev);
sector_t zone_sectors;
sector_t end_sector = sector + nr_sectors;
struct bio *bio = NULL;
struct blk_plug plug;
int ret;
if (!blk_queue_is_zoned(q))
return -EOPNOTSUPP;
if (bdev_read_only(bdev))
return -EPERM;
if (!nr_sectors || end_sector > bdev->bd_part->nr_sects)
/* Out of range */
return -EINVAL;
/* Check alignment (handle eventual smaller last zone) */
zone_sectors = blk_queue_zone_sectors(q);
if (sector & (zone_sectors - 1))
return -EINVAL;
if ((nr_sectors & (zone_sectors - 1)) &&
end_sector != bdev->bd_part->nr_sects)
return -EINVAL;
blk_start_plug(&plug);
while (sector < end_sector) {
bio = blk_next_bio(bio, 0, gfp_mask);
bio->bi_iter.bi_sector = sector;
bio_set_dev(bio, bdev);
bio_set_op_attrs(bio, REQ_OP_ZONE_RESET, 0);
sector += zone_sectors;
/* This may take a while, so be nice to others */
cond_resched();
}
ret = submit_bio_wait(bio);
bio_put(bio);
blk_finish_plug(&plug);
return ret;
}
/**
* mpage_writepages - walk the list of dirty pages of the given address space & writepage() all of them
* @mapping: address space structure to write
* @wbc: subtract the number of written pages from *@wbc->nr_to_write
* @get_block: the filesystem's block mapper function.
* If this is NULL then use a_ops->writepage. Otherwise, go
* direct-to-BIO.
*
* This is a library function, which implements the writepages()
* address_space_operation.
*
* If a page is already under I/O, generic_writepages() skips it, even
* if it's dirty. This is desirable behaviour for memory-cleaning writeback,
* but it is INCORRECT for data-integrity system calls such as fsync(). fsync()
* and msync() need to guarantee that all the data which was dirty at the time
* the call was made get new I/O started against them. If wbc->sync_mode is
* WB_SYNC_ALL then we were called for data integrity and we must wait for
* existing IO to complete.
*/
int
mpage_writepages(struct address_space *mapping,
struct writeback_control *wbc, get_block_t get_block)
{
struct blk_plug plug;
int ret;
blk_start_plug(&plug);
if (!get_block)
ret = generic_writepages(mapping, wbc);
else {
struct mpage_data mpd = {
.bio = NULL,
.last_block_in_bio = 0,
.get_block = get_block,
.use_writepage = 1,
};
ret = write_cache_pages(mapping, wbc, __mpage_writepage, &mpd);
if (mpd.bio) {
int wr = (wbc->sync_mode == WB_SYNC_ALL ?
WRITE_SYNC : WRITE);
mpage_bio_submit(wr, mpd.bio);
}
}
blk_finish_plug(&plug);
return ret;
}
EXPORT_SYMBOL(mpage_writepages);
int mpage_writepage(struct page *page, get_block_t get_block,
struct writeback_control *wbc)
{
struct mpage_data mpd = {
.bio = NULL,
.last_block_in_bio = 0,
.get_block = get_block,
.use_writepage = 0,
};
int ret = __mpage_writepage(page, wbc, &mpd);
if (mpd.bio) {
int wr = (wbc->sync_mode == WB_SYNC_ALL ?
WRITE_SYNC : WRITE);
mpage_bio_submit(wr, mpd.bio);
}
return ret;
}
EXPORT_SYMBOL(mpage_writepage);
/**
* generic_writepages - walk the list of dirty pages of the given address space and writepage() all of them.
* @mapping: address space structure to write
* @wbc: subtract the number of written pages from *@wbc->nr_to_write
*
* This is a library function, which implements the writepages()
* address_space_operation.
*/
int generic_writepages(struct address_space *mapping,
struct writeback_control *wbc)
{
struct blk_plug plug;
int ret;
/* deal with chardevs and other special file */
if (!mapping->a_ops->writepage)
return 0;
blk_start_plug(&plug);
ret = write_cache_pages(mapping, wbc, __writepage, mapping);
blk_finish_plug(&plug);
return ret;
}
static void
__flush_batch(journal_t *journal, int *batch_count)
{
int i;
struct blk_plug plug;
blk_start_plug(&plug);
for (i = 0; i < *batch_count; i++)
write_dirty_buffer(journal->j_chkpt_bhs[i], WRITE_SYNC);
blk_finish_plug(&plug);
for (i = 0; i < *batch_count; i++) {
struct buffer_head *bh = journal->j_chkpt_bhs[i];
BUFFER_TRACE(bh, "brelse");
__brelse(bh);
}
*batch_count = 0;
}
/**
* swapin_readahead - swap in pages in hope we need them soon
* @entry: swap entry of this memory
* @gfp_mask: memory allocation flags
* @vma: user vma this address belongs to
* @addr: target address for mempolicy
*
* Returns the struct page for entry and addr, after queueing swapin.
*
* Primitive swap readahead code. We simply read an aligned block of
* (1 << page_cluster) entries in the swap area. This method is chosen
* because it doesn't cost us any seek time. We also make sure to queue
* the 'original' request together with the readahead ones...
*
* This has been extended to use the NUMA policies from the mm triggering
* the readahead.
*
* Caller must hold down_read on the vma->vm_mm if vma is not NULL.
*/
struct page *swapin_readahead(swp_entry_t entry, gfp_t gfp_mask,
struct vm_area_struct *vma, unsigned long addr)
{
struct page *page;
unsigned long entry_offset = swp_offset(entry);
unsigned long offset = entry_offset;
unsigned long start_offset, end_offset;
unsigned long mask;
struct blk_plug plug;
bool do_poll = true;
mask = swapin_nr_pages(offset) - 1;
if (!mask)
goto skip;
do_poll = false;
/* Read a page_cluster sized and aligned cluster around offset. */
start_offset = offset & ~mask;
end_offset = offset | mask;
if (!start_offset) /* First page is swap header. */
start_offset++;
blk_start_plug(&plug);
for (offset = start_offset; offset <= end_offset ; offset++) {
/* Ok, do the async read-ahead now */
page = read_swap_cache_async(swp_entry(swp_type(entry), offset),
gfp_mask, vma, addr, false);
if (!page)
continue;
if (offset != entry_offset && likely(!PageTransCompound(page)))
SetPageReadahead(page);
put_page(page);
}
blk_finish_plug(&plug);
lru_add_drain(); /* Push any new pages onto the LRU now */
skip:
return read_swap_cache_async(entry, gfp_mask, vma, addr, do_poll);
}
/*
* journal_commit_transaction
*
* The primary function for committing a transaction to the log. This
* function is called by the journal thread to begin a complete commit.
*/
void journal_commit_transaction(journal_t *journal)
{
transaction_t *commit_transaction;
struct journal_head *jh, *new_jh, *descriptor;
struct buffer_head **wbuf = journal->j_wbuf;
int bufs;
int flags;
int err;
unsigned int blocknr;
ktime_t start_time;
u64 commit_time;
char *tagp = NULL;
journal_header_t *header;
journal_block_tag_t *tag = NULL;
int space_left = 0;
int first_tag = 0;
int tag_flag;
int i;
struct blk_plug plug;
/*
* First job: lock down the current transaction and wait for
* all outstanding updates to complete.
*/
/* Do we need to erase the effects of a prior journal_flush? */
if (journal->j_flags & JFS_FLUSHED) {
jbd_debug(3, "super block updated\n");
journal_update_superblock(journal, 1);
} else {
jbd_debug(3, "superblock not updated\n");
}
J_ASSERT(journal->j_running_transaction != NULL);
J_ASSERT(journal->j_committing_transaction == NULL);
commit_transaction = journal->j_running_transaction;
J_ASSERT(commit_transaction->t_state == T_RUNNING);
trace_jbd_start_commit(journal, commit_transaction);
jbd_debug(1, "JBD: starting commit of transaction %d\n",
commit_transaction->t_tid);
spin_lock(&journal->j_state_lock);
commit_transaction->t_state = T_LOCKED;
trace_jbd_commit_locking(journal, commit_transaction);
spin_lock(&commit_transaction->t_handle_lock);
while (commit_transaction->t_updates) {
DEFINE_WAIT(wait);
prepare_to_wait(&journal->j_wait_updates, &wait,
TASK_UNINTERRUPTIBLE);
if (commit_transaction->t_updates) {
spin_unlock(&commit_transaction->t_handle_lock);
spin_unlock(&journal->j_state_lock);
schedule();
spin_lock(&journal->j_state_lock);
spin_lock(&commit_transaction->t_handle_lock);
}
finish_wait(&journal->j_wait_updates, &wait);
}
spin_unlock(&commit_transaction->t_handle_lock);
J_ASSERT (commit_transaction->t_outstanding_credits <=
journal->j_max_transaction_buffers);
/*
* First thing we are allowed to do is to discard any remaining
* BJ_Reserved buffers. Note, it is _not_ permissible to assume
* that there are no such buffers: if a large filesystem
* operation like a truncate needs to split itself over multiple
* transactions, then it may try to do a journal_restart() while
* there are still BJ_Reserved buffers outstanding. These must
* be released cleanly from the current transaction.
*
* In this case, the filesystem must still reserve write access
* again before modifying the buffer in the new transaction, but
* we do not require it to remember exactly which old buffers it
* has reserved. This is consistent with the existing behaviour
* that multiple journal_get_write_access() calls to the same
* buffer are perfectly permissible.
*/
while (commit_transaction->t_reserved_list) {
jh = commit_transaction->t_reserved_list;
JBUFFER_TRACE(jh, "reserved, unused: refile");
/*
* A journal_get_undo_access()+journal_release_buffer() may
* leave undo-committed data.
*/
if (jh->b_committed_data) {
struct buffer_head *bh = jh2bh(jh);
jbd_lock_bh_state(bh);
jbd_free(jh->b_committed_data, bh->b_size);
jh->b_committed_data = NULL;
jbd_unlock_bh_state(bh);
}
journal_refile_buffer(journal, jh);
}
/*
* Now try to drop any written-back buffers from the journal's
* checkpoint lists. We do this *before* commit because it potentially
* frees some memory
*/
spin_lock(&journal->j_list_lock);
__journal_clean_checkpoint_list(journal);
spin_unlock(&journal->j_list_lock);
jbd_debug (3, "JBD: commit phase 1\n");
/*
* Clear revoked flag to reflect there is no revoked buffers
* in the next transaction which is going to be started.
*/
journal_clear_buffer_revoked_flags(journal);
/*
* Switch to a new revoke table.
*/
journal_switch_revoke_table(journal);
trace_jbd_commit_flushing(journal, commit_transaction);
commit_transaction->t_state = T_FLUSH;
journal->j_committing_transaction = commit_transaction;
journal->j_running_transaction = NULL;
start_time = ktime_get();
commit_transaction->t_log_start = journal->j_head;
wake_up(&journal->j_wait_transaction_locked);
spin_unlock(&journal->j_state_lock);
jbd_debug (3, "JBD: commit phase 2\n");
/*
* Now start flushing things to disk, in the order they appear
* on the transaction lists. Data blocks go first.
*/
blk_start_plug(&plug);
err = journal_submit_data_buffers(journal, commit_transaction,
WRITE_SYNC);
blk_finish_plug(&plug);
/*
* Wait for all previously submitted IO to complete.
*/
spin_lock(&journal->j_list_lock);
while (commit_transaction->t_locked_list) {
struct buffer_head *bh;
jh = commit_transaction->t_locked_list->b_tprev;
bh = jh2bh(jh);
get_bh(bh);
if (buffer_locked(bh)) {
spin_unlock(&journal->j_list_lock);
wait_on_buffer(bh);
spin_lock(&journal->j_list_lock);
}
if (unlikely(!buffer_uptodate(bh))) {
if (!trylock_page(bh->b_page)) {
spin_unlock(&journal->j_list_lock);
lock_page(bh->b_page);
spin_lock(&journal->j_list_lock);
}
if (bh->b_page->mapping)
set_bit(AS_EIO, &bh->b_page->mapping->flags);
unlock_page(bh->b_page);
SetPageError(bh->b_page);
err = -EIO;
}
if (!inverted_lock(journal, bh)) {
put_bh(bh);
spin_lock(&journal->j_list_lock);
continue;
}
if (buffer_jbd(bh) && bh2jh(bh) == jh &&
jh->b_transaction == commit_transaction &&
jh->b_jlist == BJ_Locked)
__journal_unfile_buffer(jh);
jbd_unlock_bh_state(bh);
release_data_buffer(bh);
cond_resched_lock(&journal->j_list_lock);
}
spin_unlock(&journal->j_list_lock);
if (err) {
char b[BDEVNAME_SIZE];
printk(KERN_WARNING
"JBD: Detected IO errors while flushing file data "
"on %s\n", bdevname(journal->j_fs_dev, b));
if (journal->j_flags & JFS_ABORT_ON_SYNCDATA_ERR)
journal_abort(journal, err);
err = 0;
}
blk_start_plug(&plug);
journal_write_revoke_records(journal, commit_transaction, WRITE_SYNC);
/*
* If we found any dirty or locked buffers, then we should have
* looped back up to the write_out_data label. If there weren't
* any then journal_clean_data_list should have wiped the list
* clean by now, so check that it is in fact empty.
*/
J_ASSERT (commit_transaction->t_sync_datalist == NULL);
jbd_debug (3, "JBD: commit phase 3\n");
/*
* Way to go: we have now written out all of the data for a
* transaction! Now comes the tricky part: we need to write out
* metadata. Loop over the transaction's entire buffer list:
*/
spin_lock(&journal->j_state_lock);
commit_transaction->t_state = T_COMMIT;
spin_unlock(&journal->j_state_lock);
trace_jbd_commit_logging(journal, commit_transaction);
J_ASSERT(commit_transaction->t_nr_buffers <=
commit_transaction->t_outstanding_credits);
descriptor = NULL;
bufs = 0;
while (commit_transaction->t_buffers) {
/* Find the next buffer to be journaled... */
jh = commit_transaction->t_buffers;
/* If we're in abort mode, we just un-journal the buffer and
release it. */
if (is_journal_aborted(journal)) {
clear_buffer_jbddirty(jh2bh(jh));
JBUFFER_TRACE(jh, "journal is aborting: refile");
journal_refile_buffer(journal, jh);
/* If that was the last one, we need to clean up
* any descriptor buffers which may have been
* already allocated, even if we are now
* aborting. */
if (!commit_transaction->t_buffers)
goto start_journal_io;
continue;
}
/* Make sure we have a descriptor block in which to
record the metadata buffer. */
if (!descriptor) {
struct buffer_head *bh;
J_ASSERT (bufs == 0);
jbd_debug(4, "JBD: get descriptor\n");
descriptor = journal_get_descriptor_buffer(journal);
if (!descriptor) {
journal_abort(journal, -EIO);
continue;
}
bh = jh2bh(descriptor);
jbd_debug(4, "JBD: got buffer %llu (%p)\n",
(unsigned long long)bh->b_blocknr, bh->b_data);
header = (journal_header_t *)&bh->b_data[0];
header->h_magic = cpu_to_be32(JFS_MAGIC_NUMBER);
header->h_blocktype = cpu_to_be32(JFS_DESCRIPTOR_BLOCK);
header->h_sequence = cpu_to_be32(commit_transaction->t_tid);
tagp = &bh->b_data[sizeof(journal_header_t)];
space_left = bh->b_size - sizeof(journal_header_t);
first_tag = 1;
set_buffer_jwrite(bh);
set_buffer_dirty(bh);
wbuf[bufs++] = bh;
/* Record it so that we can wait for IO
completion later */
BUFFER_TRACE(bh, "ph3: file as descriptor");
journal_file_buffer(descriptor, commit_transaction,
BJ_LogCtl);
}
/* Where is the buffer to be written? */
err = journal_next_log_block(journal, &blocknr);
/* If the block mapping failed, just abandon the buffer
and repeat this loop: we'll fall into the
refile-on-abort condition above. */
if (err) {
journal_abort(journal, err);
continue;
}
/*
* start_this_handle() uses t_outstanding_credits to determine
* the free space in the log, but this counter is changed
* by journal_next_log_block() also.
*/
commit_transaction->t_outstanding_credits--;
/* Bump b_count to prevent truncate from stumbling over
the shadowed buffer! @@@ This can go if we ever get
rid of the BJ_IO/BJ_Shadow pairing of buffers. */
get_bh(jh2bh(jh));
/* Make a temporary IO buffer with which to write it out
(this will requeue both the metadata buffer and the
temporary IO buffer). new_bh goes on BJ_IO*/
set_buffer_jwrite(jh2bh(jh));
/*
* akpm: journal_write_metadata_buffer() sets
* new_bh->b_transaction to commit_transaction.
* We need to clean this up before we release new_bh
* (which is of type BJ_IO)
*/
JBUFFER_TRACE(jh, "ph3: write metadata");
flags = journal_write_metadata_buffer(commit_transaction,
jh, &new_jh, blocknr);
set_buffer_jwrite(jh2bh(new_jh));
wbuf[bufs++] = jh2bh(new_jh);
/* Record the new block's tag in the current descriptor
buffer */
tag_flag = 0;
if (flags & 1)
tag_flag |= JFS_FLAG_ESCAPE;
if (!first_tag)
tag_flag |= JFS_FLAG_SAME_UUID;
tag = (journal_block_tag_t *) tagp;
tag->t_blocknr = cpu_to_be32(jh2bh(jh)->b_blocknr);
tag->t_flags = cpu_to_be32(tag_flag);
tagp += sizeof(journal_block_tag_t);
space_left -= sizeof(journal_block_tag_t);
if (first_tag) {
memcpy (tagp, journal->j_uuid, 16);
tagp += 16;
space_left -= 16;
first_tag = 0;
}
/* If there's no more to do, or if the descriptor is full,
let the IO rip! */
if (bufs == journal->j_wbufsize ||
commit_transaction->t_buffers == NULL ||
space_left < sizeof(journal_block_tag_t) + 16) {
jbd_debug(4, "JBD: Submit %d IOs\n", bufs);
/* Write an end-of-descriptor marker before
submitting the IOs. "tag" still points to
the last tag we set up. */
tag->t_flags |= cpu_to_be32(JFS_FLAG_LAST_TAG);
start_journal_io:
for (i = 0; i < bufs; i++) {
struct buffer_head *bh = wbuf[i];
lock_buffer(bh);
clear_buffer_dirty(bh);
set_buffer_uptodate(bh);
bh->b_end_io = journal_end_buffer_io_sync;
submit_bh(WRITE_SYNC, bh);
}
cond_resched();
/* Force a new descriptor to be generated next
time round the loop. */
descriptor = NULL;
bufs = 0;
}
}
blk_finish_plug(&plug);
/* Lo and behold: we have just managed to send a transaction to
the log. Before we can commit it, wait for the IO so far to
complete. Control buffers being written are on the
transaction's t_log_list queue, and metadata buffers are on
the t_iobuf_list queue.
Wait for the buffers in reverse order. That way we are
less likely to be woken up until all IOs have completed, and
so we incur less scheduling load.
*/
jbd_debug(3, "JBD: commit phase 4\n");
/*
* akpm: these are BJ_IO, and j_list_lock is not needed.
* See __journal_try_to_free_buffer.
*/
wait_for_iobuf:
while (commit_transaction->t_iobuf_list != NULL) {
struct buffer_head *bh;
jh = commit_transaction->t_iobuf_list->b_tprev;
bh = jh2bh(jh);
if (buffer_locked(bh)) {
wait_on_buffer(bh);
goto wait_for_iobuf;
}
if (cond_resched())
goto wait_for_iobuf;
if (unlikely(!buffer_uptodate(bh)))
err = -EIO;
clear_buffer_jwrite(bh);
JBUFFER_TRACE(jh, "ph4: unfile after journal write");
journal_unfile_buffer(journal, jh);
/*
* ->t_iobuf_list should contain only dummy buffer_heads
* which were created by journal_write_metadata_buffer().
*/
BUFFER_TRACE(bh, "dumping temporary bh");
journal_put_journal_head(jh);
__brelse(bh);
J_ASSERT_BH(bh, atomic_read(&bh->b_count) == 0);
free_buffer_head(bh);
/* We also have to unlock and free the corresponding
shadowed buffer */
jh = commit_transaction->t_shadow_list->b_tprev;
bh = jh2bh(jh);
clear_buffer_jwrite(bh);
J_ASSERT_BH(bh, buffer_jbddirty(bh));
/* The metadata is now released for reuse, but we need
to remember it against this transaction so that when
we finally commit, we can do any checkpointing
required. */
JBUFFER_TRACE(jh, "file as BJ_Forget");
journal_file_buffer(jh, commit_transaction, BJ_Forget);
/*
* Wake up any transactions which were waiting for this
* IO to complete. The barrier must be here so that changes
* by journal_file_buffer() take effect before wake_up_bit()
* does the waitqueue check.
*/
smp_mb();
wake_up_bit(&bh->b_state, BH_Unshadow);
JBUFFER_TRACE(jh, "brelse shadowed buffer");
__brelse(bh);
}
J_ASSERT (commit_transaction->t_shadow_list == NULL);
jbd_debug(3, "JBD: commit phase 5\n");
/* Here we wait for the revoke record and descriptor record buffers */
wait_for_ctlbuf:
while (commit_transaction->t_log_list != NULL) {
struct buffer_head *bh;
jh = commit_transaction->t_log_list->b_tprev;
bh = jh2bh(jh);
if (buffer_locked(bh)) {
wait_on_buffer(bh);
goto wait_for_ctlbuf;
}
if (cond_resched())
goto wait_for_ctlbuf;
if (unlikely(!buffer_uptodate(bh)))
err = -EIO;
BUFFER_TRACE(bh, "ph5: control buffer writeout done: unfile");
clear_buffer_jwrite(bh);
journal_unfile_buffer(journal, jh);
journal_put_journal_head(jh);
__brelse(bh); /* One for getblk */
/* AKPM: bforget here */
}
if (err)
journal_abort(journal, err);
jbd_debug(3, "JBD: commit phase 6\n");
/* All metadata is written, now write commit record and do cleanup */
spin_lock(&journal->j_state_lock);
J_ASSERT(commit_transaction->t_state == T_COMMIT);
commit_transaction->t_state = T_COMMIT_RECORD;
spin_unlock(&journal->j_state_lock);
if (journal_write_commit_record(journal, commit_transaction))
err = -EIO;
if (err)
journal_abort(journal, err);
/* End of a transaction! Finally, we can do checkpoint
processing: any buffers committed as a result of this
transaction can be removed from any checkpoint list it was on
before. */
jbd_debug(3, "JBD: commit phase 7\n");
J_ASSERT(commit_transaction->t_sync_datalist == NULL);
J_ASSERT(commit_transaction->t_buffers == NULL);
J_ASSERT(commit_transaction->t_checkpoint_list == NULL);
J_ASSERT(commit_transaction->t_iobuf_list == NULL);
J_ASSERT(commit_transaction->t_shadow_list == NULL);
J_ASSERT(commit_transaction->t_log_list == NULL);
restart_loop:
/*
* As there are other places (journal_unmap_buffer()) adding buffers
* to this list we have to be careful and hold the j_list_lock.
*/
spin_lock(&journal->j_list_lock);
while (commit_transaction->t_forget) {
transaction_t *cp_transaction;
struct buffer_head *bh;
int try_to_free = 0;
jh = commit_transaction->t_forget;
spin_unlock(&journal->j_list_lock);
bh = jh2bh(jh);
/*
* Get a reference so that bh cannot be freed before we are
* done with it.
*/
get_bh(bh);
jbd_lock_bh_state(bh);
J_ASSERT_JH(jh, jh->b_transaction == commit_transaction ||
jh->b_transaction == journal->j_running_transaction);
/*
* If there is undo-protected committed data against
* this buffer, then we can remove it now. If it is a
* buffer needing such protection, the old frozen_data
* field now points to a committed version of the
* buffer, so rotate that field to the new committed
* data.
*
* Otherwise, we can just throw away the frozen data now.
*/
if (jh->b_committed_data) {
jbd_free(jh->b_committed_data, bh->b_size);
jh->b_committed_data = NULL;
if (jh->b_frozen_data) {
jh->b_committed_data = jh->b_frozen_data;
jh->b_frozen_data = NULL;
}
} else if (jh->b_frozen_data) {
jbd_free(jh->b_frozen_data, bh->b_size);
jh->b_frozen_data = NULL;
}
spin_lock(&journal->j_list_lock);
cp_transaction = jh->b_cp_transaction;
if (cp_transaction) {
JBUFFER_TRACE(jh, "remove from old cp transaction");
__journal_remove_checkpoint(jh);
}
/* Only re-checkpoint the buffer_head if it is marked
* dirty. If the buffer was added to the BJ_Forget list
* by journal_forget, it may no longer be dirty and
* there's no point in keeping a checkpoint record for
* it. */
/* A buffer which has been freed while still being
* journaled by a previous transaction may end up still
* being dirty here, but we want to avoid writing back
* that buffer in the future after the "add to orphan"
* operation been committed, That's not only a performance
* gain, it also stops aliasing problems if the buffer is
* left behind for writeback and gets reallocated for another
* use in a different page. */
if (buffer_freed(bh) && !jh->b_next_transaction) {
clear_buffer_freed(bh);
clear_buffer_jbddirty(bh);
}
if (buffer_jbddirty(bh)) {
JBUFFER_TRACE(jh, "add to new checkpointing trans");
__journal_insert_checkpoint(jh, commit_transaction);
if (is_journal_aborted(journal))
clear_buffer_jbddirty(bh);
} else {
J_ASSERT_BH(bh, !buffer_dirty(bh));
/*
* The buffer on BJ_Forget list and not jbddirty means
* it has been freed by this transaction and hence it
* could not have been reallocated until this
* transaction has committed. *BUT* it could be
* reallocated once we have written all the data to
* disk and before we process the buffer on BJ_Forget
* list.
*/
if (!jh->b_next_transaction)
try_to_free = 1;
}
JBUFFER_TRACE(jh, "refile or unfile freed buffer");
__journal_refile_buffer(jh);
jbd_unlock_bh_state(bh);
if (try_to_free)
release_buffer_page(bh);
else
__brelse(bh);
cond_resched_lock(&journal->j_list_lock);
}
spin_unlock(&journal->j_list_lock);
/*
* This is a bit sleazy. We use j_list_lock to protect transition
* of a transaction into T_FINISHED state and calling
* __journal_drop_transaction(). Otherwise we could race with
* other checkpointing code processing the transaction...
*/
spin_lock(&journal->j_state_lock);
spin_lock(&journal->j_list_lock);
/*
* Now recheck if some buffers did not get attached to the transaction
* while the lock was dropped...
*/
if (commit_transaction->t_forget) {
spin_unlock(&journal->j_list_lock);
spin_unlock(&journal->j_state_lock);
goto restart_loop;
}
/* Done with this transaction! */
jbd_debug(3, "JBD: commit phase 8\n");
J_ASSERT(commit_transaction->t_state == T_COMMIT_RECORD);
commit_transaction->t_state = T_FINISHED;
J_ASSERT(commit_transaction == journal->j_committing_transaction);
journal->j_commit_sequence = commit_transaction->t_tid;
journal->j_committing_transaction = NULL;
commit_time = ktime_to_ns(ktime_sub(ktime_get(), start_time));
/*
* weight the commit time higher than the average time so we don't
* react too strongly to vast changes in commit time
*/
if (likely(journal->j_average_commit_time))
journal->j_average_commit_time = (commit_time*3 +
journal->j_average_commit_time) / 4;
else
journal->j_average_commit_time = commit_time;
spin_unlock(&journal->j_state_lock);
if (commit_transaction->t_checkpoint_list == NULL &&
commit_transaction->t_checkpoint_io_list == NULL) {
__journal_drop_transaction(journal, commit_transaction);
} else {
if (journal->j_checkpoint_transactions == NULL) {
journal->j_checkpoint_transactions = commit_transaction;
commit_transaction->t_cpnext = commit_transaction;
commit_transaction->t_cpprev = commit_transaction;
} else {
commit_transaction->t_cpnext =
journal->j_checkpoint_transactions;
commit_transaction->t_cpprev =
commit_transaction->t_cpnext->t_cpprev;
commit_transaction->t_cpnext->t_cpprev =
commit_transaction;
commit_transaction->t_cpprev->t_cpnext =
commit_transaction;
}
}
spin_unlock(&journal->j_list_lock);
trace_jbd_end_commit(journal, commit_transaction);
jbd_debug(1, "JBD: commit %d complete, head %d\n",
journal->j_commit_sequence, journal->j_tail_sequence);
wake_up(&journal->j_wait_done_commit);
}
/*
* journal_commit_transaction
*
* The primary function for committing a transaction to the log. This
* function is called by the journal thread to begin a complete commit.
*/
void journal_commit_transaction(journal_t *journal)
{
transaction_t *commit_transaction;
struct journal_head *jh, *new_jh, *descriptor;
struct buffer_head **wbuf = journal->j_wbuf;
int bufs;
int flags;
int err;
unsigned int blocknr;
ktime_t start_time;
u64 commit_time;
char *tagp = NULL;
journal_header_t *header;
journal_block_tag_t *tag = NULL;
int space_left = 0;
int first_tag = 0;
int tag_flag;
int i;
struct blk_plug plug;
/*
* First job: lock down the current transaction and wait for
* all outstanding updates to complete.
*/
/* Do we need to erase the effects of a prior journal_flush? */
if (journal->j_flags & JFS_FLUSHED) {
jbd_debug(3, "super block updated\n");
journal_update_superblock(journal, 1);
} else {
jbd_debug(3, "superblock not updated\n");
}
J_ASSERT(journal->j_running_transaction != NULL);
J_ASSERT(journal->j_committing_transaction == NULL);
commit_transaction = journal->j_running_transaction;
J_ASSERT(commit_transaction->t_state == T_RUNNING);
trace_jbd_start_commit(journal, commit_transaction);
jbd_debug(1, "JBD: starting commit of transaction %d\n",
commit_transaction->t_tid);
spin_lock(&journal->j_state_lock);
commit_transaction->t_state = T_LOCKED;
trace_jbd_commit_locking(journal, commit_transaction);
spin_lock(&commit_transaction->t_handle_lock);
while (commit_transaction->t_updates) {
DEFINE_WAIT(wait);
prepare_to_wait(&journal->j_wait_updates, &wait,
TASK_UNINTERRUPTIBLE);
if (commit_transaction->t_updates) {
spin_unlock(&commit_transaction->t_handle_lock);
spin_unlock(&journal->j_state_lock);
schedule();
spin_lock(&journal->j_state_lock);
spin_lock(&commit_transaction->t_handle_lock);
}
finish_wait(&journal->j_wait_updates, &wait);
}
spin_unlock(&commit_transaction->t_handle_lock);
J_ASSERT (commit_transaction->t_outstanding_credits <=
journal->j_max_transaction_buffers);
/*
* First thing we are allowed to do is to discard any remaining
* BJ_Reserved buffers. Note, it is _not_ permissible to assume
* that there are no such buffers: if a large filesystem
* operation like a truncate needs to split itself over multiple
* transactions, then it may try to do a journal_restart() while
* there are still BJ_Reserved buffers outstanding. These must
* be released cleanly from the current transaction.
*
* In this case, the filesystem must still reserve write access
* again before modifying the buffer in the new transaction, but
* we do not require it to remember exactly which old buffers it
* has reserved. This is consistent with the existing behaviour
* that multiple journal_get_write_access() calls to the same
* buffer are perfectly permissible.
*/
while (commit_transaction->t_reserved_list) {
jh = commit_transaction->t_reserved_list;
JBUFFER_TRACE(jh, "reserved, unused: refile");
/*
* A journal_get_undo_access()+journal_release_buffer() may
* leave undo-committed data.
*/
if (jh->b_committed_data) {
struct buffer_head *bh = jh2bh(jh);
jbd_lock_bh_state(bh);
jbd_free(jh->b_committed_data, bh->b_size);
jh->b_committed_data = NULL;
jbd_unlock_bh_state(bh);
}
journal_refile_buffer(journal, jh);
}
/*
* Now try to drop any written-back buffers from the journal's
* checkpoint lists. We do this *before* commit because it potentially
* frees some memory
*/
spin_lock(&journal->j_list_lock);
__journal_clean_checkpoint_list(journal);
spin_unlock(&journal->j_list_lock);
jbd_debug (3, "JBD: commit phase 1\n");
/*
* Switch to a new revoke table.
*/
journal_switch_revoke_table(journal);
trace_jbd_commit_flushing(journal, commit_transaction);
commit_transaction->t_state = T_FLUSH;
journal->j_committing_transaction = commit_transaction;
journal->j_running_transaction = NULL;
start_time = ktime_get();
commit_transaction->t_log_start = journal->j_head;
wake_up(&journal->j_wait_transaction_locked);
spin_unlock(&journal->j_state_lock);
jbd_debug (3, "JBD: commit phase 2\n");
/*
* Now start flushing things to disk, in the order they appear
* on the transaction lists. Data blocks go first.
*/
blk_start_plug(&plug);
err = journal_submit_data_buffers(journal, commit_transaction,
WRITE_SYNC);
blk_finish_plug(&plug);
/*
* Wait for all previously submitted IO to complete.
*/
spin_lock(&journal->j_list_lock);
while (commit_transaction->t_locked_list) {
struct buffer_head *bh;
jh = commit_transaction->t_locked_list->b_tprev;
bh = jh2bh(jh);
get_bh(bh);
if (buffer_locked(bh)) {
spin_unlock(&journal->j_list_lock);
wait_on_buffer(bh);
spin_lock(&journal->j_list_lock);
}
if (unlikely(!buffer_uptodate(bh))) {
if (!trylock_page(bh->b_page)) {
spin_unlock(&journal->j_list_lock);
lock_page(bh->b_page);
spin_lock(&journal->j_list_lock);
}
if (bh->b_page->mapping)
set_bit(AS_EIO, &bh->b_page->mapping->flags);
unlock_page(bh->b_page);
SetPageError(bh->b_page);
err = -EIO;
}
if (!inverted_lock(journal, bh)) {
put_bh(bh);
spin_lock(&journal->j_list_lock);
continue;
}
if (buffer_jbd(bh) && bh2jh(bh) == jh &&
jh->b_transaction == commit_transaction &&
jh->b_jlist == BJ_Locked)
__journal_unfile_buffer(jh);
jbd_unlock_bh_state(bh);
release_data_buffer(bh);
cond_resched_lock(&journal->j_list_lock);
}
spin_unlock(&journal->j_list_lock);
if (err) {
char b[BDEVNAME_SIZE];
printk(KERN_WARNING
"JBD: Detected IO errors while flushing file data "
"on %s\n", bdevname(journal->j_fs_dev, b));
if (journal->j_flags & JFS_ABORT_ON_SYNCDATA_ERR)
journal_abort(journal, err);
err = 0;
}
blk_start_plug(&plug);
journal_write_revoke_records(journal, commit_transaction, WRITE_SYNC);
/*
* If we found any dirty or locked buffers, then we should have
* looped back up to the write_out_data label. If there weren't
* any then journal_clean_data_list should have wiped the list
* clean by now, so check that it is in fact empty.
*/
J_ASSERT (commit_transaction->t_sync_datalist == NULL);
jbd_debug (3, "JBD: commit phase 3\n");
/*
* Way to go: we have now written out all of the data for a
* transaction! Now comes the tricky part: we need to write out
* metadata. Loop over the transaction's entire buffer list:
*/
spin_lock(&journal->j_state_lock);
commit_transaction->t_state = T_COMMIT;
spin_unlock(&journal->j_state_lock);
trace_jbd_commit_logging(journal, commit_transaction);
J_ASSERT(commit_transaction->t_nr_buffers <=
commit_transaction->t_outstanding_credits);
descriptor = NULL;
bufs = 0;
while (commit_transaction->t_buffers) {
/* Find the next buffer to be journaled... */
jh = commit_transaction->t_buffers;
/* If we're in abort mode, we just un-journal the buffer and
release it. */
if (is_journal_aborted(journal)) {
clear_buffer_jbddirty(jh2bh(jh));
JBUFFER_TRACE(jh, "journal is aborting: refile");
journal_refile_buffer(journal, jh);
/* If that was the last one, we need to clean up
* any descriptor buffers which may have been
* already allocated, even if we are now
* aborting. */
if (!commit_transaction->t_buffers)
goto start_journal_io;
continue;
}
/* Make sure we have a descriptor block in which to
record the metadata buffer. */
if (!descriptor) {
struct buffer_head *bh;
J_ASSERT (bufs == 0);
jbd_debug(4, "JBD: get descriptor\n");
descriptor = journal_get_descriptor_buffer(journal);
if (!descriptor) {
journal_abort(journal, -EIO);
continue;
}
bh = jh2bh(descriptor);
jbd_debug(4, "JBD: got buffer %llu (%p)\n",
(unsigned long long)bh->b_blocknr, bh->b_data);
header = (journal_header_t *)&bh->b_data[0];
header->h_magic = cpu_to_be32(JFS_MAGIC_NUMBER);
header->h_blocktype = cpu_to_be32(JFS_DESCRIPTOR_BLOCK);
header->h_sequence = cpu_to_be32(commit_transaction->t_tid);
tagp = &bh->b_data[sizeof(journal_header_t)];
space_left = bh->b_size - sizeof(journal_header_t);
first_tag = 1;
set_buffer_jwrite(bh);
set_buffer_dirty(bh);
wbuf[bufs++] = bh;
/* Record it so that we can wait for IO
completion later */
BUFFER_TRACE(bh, "ph3: file as descriptor");
journal_file_buffer(descriptor, commit_transaction,
BJ_LogCtl);
}
/* Where is the buffer to be written? */
err = journal_next_log_block(journal, &blocknr);
/* If the block mapping failed, just abandon the buffer
and repeat this loop: we'll fall into the
refile-on-abort condition above. */
if (err) {
journal_abort(journal, err);
continue;
}
/*
/**
* blkdev_issue_discard - queue a discard
* @bdev: blockdev to issue discard for
* @sector: start sector
* @nr_sects: number of sectors to discard
* @gfp_mask: memory allocation flags (for bio_alloc)
* @flags: BLKDEV_IFL_* flags to control behaviour
*
* Description:
* Issue a discard request for the sectors in question.
*/
int blkdev_issue_discard(struct block_device *bdev, sector_t sector,
sector_t nr_sects, gfp_t gfp_mask, unsigned long flags)
{
DECLARE_COMPLETION_ONSTACK(wait);
struct request_queue *q = bdev_get_queue(bdev);
int type = REQ_WRITE | REQ_DISCARD;
struct bio_batch bb;
struct bio *bio;
int ret = 0;
struct blk_plug plug;
if (!q)
return -ENXIO;
if (!blk_queue_discard(q))
return -EOPNOTSUPP;
if (flags & BLKDEV_DISCARD_SECURE) {
if (!blk_queue_secdiscard(q))
return -EOPNOTSUPP;
type |= REQ_SECURE;
}
atomic_set(&bb.done, 1);
bb.error = 0;
bb.wait = &wait;
blk_start_plug(&plug);
while (nr_sects) {
unsigned int req_sects;
sector_t end_sect;
bio = bio_alloc(gfp_mask, 1);
if (!bio) {
ret = -ENOMEM;
break;
}
req_sects = min_t(sector_t, nr_sects, MAX_BIO_SECTORS);
end_sect = sector + req_sects;
bio->bi_iter.bi_sector = sector;
bio->bi_end_io = bio_batch_end_io;
bio->bi_bdev = bdev;
bio->bi_private = &bb;
bio->bi_iter.bi_size = req_sects << 9;
nr_sects -= req_sects;
sector = end_sect;
atomic_inc(&bb.done);
submit_bio(type, bio);
/*
* We can loop for a long time in here, if someone does
* full device discards (like mkfs). Be nice and allow
* us to schedule out to avoid softlocking if preempt
* is disabled.
*/
cond_resched();
}
blk_finish_plug(&plug);
/* Wait for bios in-flight */
if (!atomic_dec_and_test(&bb.done))
wait_for_completion_io(&wait);
if (bb.error)
return bb.error;
return ret;
}
