static int bma020_proc_read(char *page, char **start, off_t off, int count, int *eof, void *data)
{
char *p = page;
int len = 0;
mutex_lock(&bma020.power_lock);
printk("bma222_proc_read\n");
bma020_set_mode( BMA020_MODE_NORMAL );
bma020.state |= ACC_ENABLED;
bma_acc_enable();
mutex_unlock(&bma020.power_lock);
len = (p - page) - off;
if (len < 0) {
len = 0;
}
printk("bma_proc_read: success full\n");
*eof = (len <= count) ? 1 : 0;
*start = page + off;
return len;
}
int bma020_ioctl(struct inode *inode, struct file *filp, unsigned int ioctl_num, unsigned long arg)
{
bma020acc_t accels;
unsigned int arg_data;
int err = 0;
gprintk("start\n");
switch( ioctl_num )
{
case IOCTL_BMA020_GET_ACC_VALUE :
{
bma020_read_accel_xyz( &accels );
gprintk( "acc data x = %d / y = %d / z = %d\n", accels.x, accels.y, accels.z );
if( copy_to_user( (bma020acc_t*)arg, &accels, sizeof(bma020acc_t) ) )
{
err = -EFAULT;
}
}
break;
case IOC_SET_ACCELEROMETER :
{
if( copy_from_user( (unsigned int*)&arg_data, (unsigned int*)arg, sizeof(unsigned int) ) )
{
}
if( arg_data == BMA020_POWER_ON )
{
printk( "ioctl : bma020 power on\n" );
bma020_set_mode( BMA020_MODE_NORMAL );
}
else
{
printk( "ioctl : bma020 power off\n" );
bma020_set_mode( BMA020_MODE_SLEEP );
}
}
break;
default :
break;
}
return err;
}
static int bma020_accelerometer_suspend( struct platform_device* pdev, pm_message_t state )
{
printk(" %s \n",__func__);
bma020_set_mode( BMA020_MODE_SLEEP );
if (bma020.state & ACC_ENABLED)
bma_acc_disable();
return 0;
}
static int bma020_accelerometer_resume( struct platform_device* pdev )
{
printk(" %s \n",__func__);
if (bma020.state & ACC_ENABLED)
bma_acc_enable();
bma020_set_mode( BMA020_MODE_NORMAL );
return 0;
}
static ssize_t bma020_show_accel_value(struct device *dev,struct device_attribute *attr, char *buf)
{
bma020acc_t accel;
bma020_set_mode(BMA020_MODE_NORMAL);
bma020_set_range(BMA020_RANGE_2G);
bma020_set_bandwidth(BMA020_BW_100HZ);
bma020_read_accel_xyz( &accel);
return sprintf(buf, "%d,%d,%d\n", accel.x,accel.y,accel.z);
}
static int bma020_proc_read(char *page, char **start, off_t off, int count, int *eof, void *data)
{
bma020acc_t acc;
bma020_set_mode( BMA020_MODE_NORMAL );
bma020_read_accel_xyz(&acc);
p += sprintf(p,"[BMA020]\nX axis: %d\nY axis: %d\nZ axis: %d\n" , acc.x, acc.y, acc.z);
len = (p - page) - off;
if (len < 0) {
len = 0;
}
*eof = (len <= count) ? 1 : 0;
*start = page + off;
return len;
}
int bma020_acc_start(void)
{
int result;
struct device *dev_t;
bma020acc_t accels; /* only for test */
printk("%s \n",__func__);
result = register_chrdev( BMA150_MAJOR, ACC_DEV_NAME, &acc_fops);
if (result < 0)
{
return result;
}
acc_class = class_create (THIS_MODULE, "BMA-dev");
if (IS_ERR(acc_class))
{
unregister_chrdev( BMA150_MAJOR, ACC_DEV_NAME);
return PTR_ERR( acc_class );
}
dev_t = device_create( acc_class, NULL, MKDEV(BMA150_MAJOR, 0), "%s", "accelerometer");
if (IS_ERR(dev_t))
{
return PTR_ERR(dev_t);
}
result = i2c_acc_bma020_init();
if(result)
{
return result;
}
bma020_chip_init();
gprintk("[BMA020] read_xyz ==========================\n");
bma020_read_accel_xyz( &accels );
gprintk("[BMA020] x = %d / y = %d / z = %d\n", accels.x, accels.y, accels.z );
gprintk("[BMA020] ===================================\n");
/* only for test */
#if 0
printk( "before get xyz\n" );
mdelay(3000);
while(1)
{
bma020_read_accel_xyz( &accels );
printk( "acc data x = %d / y = %d / z = %d\n", accels.x, accels.y, accels.z );
mdelay(100);
}
#endif
#ifdef BMA020_PROC_FS
create_proc_read_entry(DRIVER_PROC_ENTRY, 0, 0, bma020_proc_read, NULL);
#endif //BMA020_PROC_FS
bma020_set_mode(BMA020_MODE_SLEEP);
gprintk("[BMA020] set_mode BMA020_MODE_SLEEP\n");
return 0;
}
static void bma020_late_resume(struct early_suspend *handler)
{
printk( "%s : Set MODE NORMAL\n", __func__ );
bma020_set_mode( BMA020_MODE_NORMAL );
}
static void bma020_early_suspend(struct early_suspend *handler)
{
printk( "%s : Set MODE SLEEP\n", __func__ );
bma020_set_mode( BMA020_MODE_SLEEP );
}
int bma020_ioctl(struct inode *inode, struct file *filp, unsigned int cmd, unsigned long arg)
{
int err = 0;
unsigned char data[6];
/* check cmd */
if(_IOC_TYPE(cmd) != BMA150_IOC_MAGIC)
{
#if DEBUG
printk("cmd magic type error\n");
#endif
return -ENOTTY;
}
if(_IOC_NR(cmd) > BMA150_IOC_MAXNR)
{
#if DEBUG
printk("cmd number error\n");
#endif
return -ENOTTY;
}
if(_IOC_DIR(cmd) & _IOC_READ)
err = !access_ok(VERIFY_WRITE,(void __user*)arg, _IOC_SIZE(cmd));
else if(_IOC_DIR(cmd) & _IOC_WRITE)
err = !access_ok(VERIFY_READ, (void __user*)arg, _IOC_SIZE(cmd));
if(err)
{
#if DEBUG
printk("cmd access_ok error\n");
#endif
return -EFAULT;
}
#if 0
/* check bam150_client */
if( bma150_client == NULL)
{
#if DEBUG
printk("I2C driver not install\n");
#endif
return -EFAULT;
}
#endif
switch(cmd)
{
case BMA150_READ_ACCEL_XYZ:
err = bma020_read_accel_xyz((bma020acc_t*)data);
if(copy_to_user((bma020acc_t*)arg,(bma020acc_t*)data,6)!=0)
{
#if DEBUG
printk("copy_to error\n");
#endif
return -EFAULT;
}
return err;
case BMA150_SET_RANGE:
if(copy_from_user(data,(unsigned char*)arg,1)!=0)
{
#if DEBUG
printk("[BMA150] copy_from_user error\n");
#endif
return -EFAULT;
}
err = bma020_set_range(*data);
return err;
case BMA150_SET_MODE:
if(copy_from_user(data,(unsigned char*)arg,1)!=0)
{
#if DEBUG
printk("[BMA150] copy_from_user error\n");
#endif
return -EFAULT;
}
err = bma020_set_mode(*data);
return err;
case BMA150_SET_BANDWIDTH:
if(copy_from_user(data,(unsigned char*)arg,1)!=0)
{
#if DEBUG
printk("[BMA150] copy_from_user error\n");
#endif
return -EFAULT;
}
err = bma020_set_bandwidth(*data);
return err;
default:
return 0;
}
}
int bma020_acc_start(void)
{
int result,err;
struct input_dev *input_dev;
struct device *dev_t;
bma020acc_t accels;
result = register_chrdev( ACC_DEV_MAJOR, ACC_DEV_NAME, &acc_fops);
if (result < 0)
{
return result;
}
acc_class = class_create (THIS_MODULE, ACC_DEV_NAME);
if (IS_ERR(acc_class))
{
unregister_chrdev( ACC_DEV_MAJOR, ACC_DEV_NAME);
return PTR_ERR( acc_class );
}
dev_t = device_create( acc_class, NULL, MKDEV(ACC_DEV_MAJOR, 0), "%s", ACC_DEV_NAME);
if (IS_ERR(dev_t))
{
return PTR_ERR(dev_t);
}
/*For testing*/
if (device_create_file(dev_t, &dev_attr_acc_file) < 0)
printk("Failed to create device file %s \n", dev_attr_acc_file.attr.name);
mutex_init(&bma020.power_lock);
/* hrtimer settings. we poll for light values using a timer. */
hrtimer_init(&bma020.timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
bma020.acc_poll_delay = ns_to_ktime(240 * NSEC_PER_MSEC);
bma020.timer.function = bma_timer_func;
/* the timer just fires off a work queue request. we need a thread
to read the i2c (can be slow and blocking). */
bma020.wq = create_singlethread_workqueue("bma_wq");
if (!bma020.wq) {
err = -ENOMEM;
printk("%s: could not create workqueue\n", __func__);
goto err_create_workqueue;
}
/* this is the thread function we run on the work queue */
INIT_WORK(&bma020.work_acc, bma_work_func_acc);
/* allocate lightsensor-level input_device */
input_dev = input_allocate_device();
if (!input_dev) {
printk("%s: could not allocate input device\n", __func__);
err = -ENOMEM;
goto err_input_allocate_device_light;
}
input_set_drvdata(input_dev, &bma020);
input_dev->name = "accel";
set_bit(EV_ABS, input_dev->evbit);
/* acceleration x-axis */
input_set_capability(input_dev, EV_ABS, ABS_X);
input_set_abs_params(input_dev, ABS_X, -1024, 1024, 0, 0);
/* acceleration y-axis */
input_set_capability(input_dev, EV_ABS, ABS_Y);
input_set_abs_params(input_dev, ABS_Y, -1024, 1024, 0, 0);
/* acceleration z-axis */
input_set_capability(input_dev, EV_ABS, ABS_Z);
input_set_abs_params(input_dev, ABS_Z, -1024, 1024, 0, 0);
printk("registering lightsensor-level input device\n");
err = input_register_device(input_dev);
if (err < 0) {
printk("%s: could not register input device\n", __func__);
input_free_device(input_dev);
goto err_input_register_device_light;
}
bma020.acc_input_dev = input_dev;
err = sysfs_create_group(&input_dev->dev.kobj,&acc_attribute_group);
if (err) {
printk("Creating bma020 attribute group failed");
goto error_device;
}
//////////////////////////////////////////////////////////////////////////////
result = i2c_acc_bma020_init();
if(result)
{
return result;
}
bma020_chip_init();
gprintk("[BMA020] read_xyz ==========================\n");
bma020_read_accel_xyz( &accels );
gprintk("[BMA020] x = %d / y = %d / z = %d\n", accels.x, accels.y, accels.z );
gprintk("[BMA020] ===================================\n");
#ifdef BMA020_PROC_FS
create_proc_read_entry(DRIVER_PROC_ENTRY, 0, 0, bma020_proc_read, NULL);
#endif //BMA020_PROC_FS
bma020_set_mode(BMA020_MODE_SLEEP);
gprintk("[BMA020] set_mode BMA020_MODE_SLEEP\n");
return 0;
error_device:
sysfs_remove_group(&input_dev->dev.kobj, &acc_attribute_group);
err_input_register_device_light:
input_unregister_device(bma020.acc_input_dev);
err_input_allocate_device_light:
destroy_workqueue(bma020.wq);
err_create_workqueue:
mutex_destroy(&bma020.power_lock);
exit:
return err;
}
