/**
* @brief BMA250 ioctl control entry point
*
* @param hal Address of an initialized sensor hardware descriptor.
* @param cmd Command to execute
* @param arg Argument for command (varies)
* @return bool true if the call succeeds, else false is returned.
*/
static bool bma250_ioctl(sensor_t *sensor, sensor_command_t cmd, void *arg)
{
sensor_hal_t *const hal = sensor->hal;
sensor_data_t sample = {.scaled = true};
switch (cmd) {
default:
sensor->err = SENSOR_ERR_UNSUPPORTED;
return false;
case SENSOR_SET_STATE:
{
sensor_state_t const mode = *((sensor_state_t *)arg);
if ((mode != sensor->mod) && bma250_set_state(sensor, mode)) {
sensor->mod = (mode == SENSOR_STATE_RESET)
? SENSOR_STATE_NORMAL : mode;
return true;
} else {
return false;
}
}
case SENSOR_SET_RANGE:
return bma250_set_range(hal, (uint16_t)*((int *)arg));
case SENSOR_SET_BANDWIDTH:
return bma250_set_bandwidth(hal, (uint16_t)*((int *)arg));
case SENSOR_ENABLE_EVENT:
return bma250_event(sensor, *((sensor_event_t *)arg), 0, true);
case SENSOR_DISABLE_EVENT:
return bma250_event(sensor, *((sensor_event_t *)arg), 0, false);
case SENSOR_SET_THRESHOLD:
return bma250_set_threshold(hal,
(sensor_threshold_desc_t *)arg);
case SENSOR_GET_THRESHOLD:
return bma250_get_threshold(hal,
(sensor_threshold_desc_t *)arg);
case SENSOR_SET_TAP:
return bma250_set_tap(hal, (sensor_tap_params_t *)arg);
case SENSOR_READ_VECTOR:
if (bma250_get_accel(hal, &sample)) {
vector3_t *const pvec = (vector3_t *)arg;
pvec->x = sample.axis.x;
pvec->y = sample.axis.y;
pvec->z = sample.axis.z;
return true;
} else {
return false;
}
}
}
static ssize_t bma250_range_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
unsigned long data;
int error;
struct i2c_client *client = to_i2c_client(dev);
struct bma250_data *bma250 = i2c_get_clientdata(client);
error = strict_strtoul(buf, 10, &data);
if (error)
return error;
if (bma250_set_range(bma250->bma250_client, (unsigned char)data) < 0)
return -EINVAL;
return count;
}
static int bma250_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
int err = 0;
int tempvalue;
struct bma250_data *data;
#ifdef BMA250_DEBUG
printk(KERN_INFO "%s\n",__FUNCTION__);
#endif
if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
{
printk(KERN_INFO "i2c_check_functionality error\n");
goto exit;
}
data = kzalloc(sizeof(struct bma250_data), GFP_KERNEL);
if (!data) {
err = -ENOMEM;
goto exit;
}
/* read chip id */
tempvalue = 0;
#ifdef BMA250_SMBUS
tempvalue = i2c_smbus_read_word_data(client, 0x00);
#else
i2c_master_send(client, (char*)&tempvalue, 1);
i2c_master_recv(client, (char*)&tempvalue, 1);
#endif
if((tempvalue&0x00FF) == 0x0003)
{
printk(KERN_INFO "Bosch Sensortec Device detected!\n BMA250 registered I2C driver!\n");
bma250_client = client;
}
else
{
printk(KERN_INFO "Bosch Sensortec Device not found, i2c error %d \n", tempvalue);
bma250_client = NULL;
err = -1;
goto kfree_exit;
}
i2c_set_clientdata(bma250_client, data);
err = misc_register(&bma_device);
if (err) {
printk(KERN_ERR "bma250 device register failed\n");
goto kfree_exit;
}
printk(KERN_INFO "bma250 device create ok\n");
/* bma250 sensor initial */
data->bma250.bus_write = bma250_i2c_write;
data->bma250.bus_read = bma250_i2c_read;
data->bma250.delay_msec = bma250_i2c_delay;
bma250_init(&data->bma250);
bma250_set_bandwidth(4); //bandwidth 125Hz
bma250_set_range(0); //range +/-2G
/* register interrupt */
#ifdef BMA250_ENABLE_IRQ
err = bma250_interrupt_config();
if (err < 0)
goto exit_dereg;
data->IRQ = client->irq;
err = request_irq(data->IRQ, bma250_irq_handler, IRQF_TRIGGER_RISING, "bma250", &data->bma250);
if (err)
{
printk(KERN_ERR "could not request irq\n");
goto exit_dereg;
}
#endif
#ifdef BMA250_HAS_EARLYSUSPEND
data->early_suspend.level = EARLY_SUSPEND_LEVEL_BLANK_SCREEN + 1;
data->early_suspend.suspend = bma250_early_suspend;
data->early_suspend.resume = bma250_late_resume;
register_early_suspend(&data->early_suspend);
#endif
return 0;
#ifdef BMA250_ENABLE_IRQ
exit_dereg:
misc_deregister(&bma_device);
#endif
kfree_exit:
kfree(data);
exit:
return err;
}
static int bma250_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
int err = 0;
int tempvalue;
struct bma250_data *data;
if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
printk(KERN_INFO "i2c_check_functionality error\n");
goto exit;
}
data = kzalloc(sizeof(struct bma250_data), GFP_KERNEL);
if (!data) {
err = -ENOMEM;
goto exit;
}
/* read chip id */
tempvalue = 0;
tempvalue = i2c_smbus_read_word_data(client, BMA250_CHIP_ID_REG) & 0x00FF;
/* SKUD board is using BMA250E chip! */
if (tempvalue == BMA250E_CHIP_ID1 || tempvalue == BMA250E_CHIP_ID2) {
printk(KERN_INFO "Bosch Sensortec Device detected!\n"
"BMA250 registered I2C driver!\n");
} else {
printk(KERN_INFO "Bosch Sensortec Device not found, \
i2c error %d \n", tempvalue);
err = -1;
goto kfree_exit;
}
i2c_set_clientdata(client, data);
data->bma250_client = client;
mutex_init(&data->value_mutex);
mutex_init(&data->mode_mutex);
mutex_init(&data->enable_mutex);
bma250_set_bandwidth(client, BMA250_BW_SET);
bma250_set_range(client, BMA250_RANGE_SET);
INIT_DELAYED_WORK(&data->work, bma250_work_func);
atomic_set(&data->delay, BMA250_MAX_DELAY);
atomic_set(&data->enable, 0);
err = bma250_input_init(data);
if (err < 0)
goto kfree_exit;
err = sysfs_create_group(&data->input->dev.kobj,
&bma250_attribute_group);
if (err < 0)
goto error_sysfs;
data->early_suspend.level = EARLY_SUSPEND_LEVEL_BLANK_SCREEN + 1;
data->early_suspend.suspend = bma250_early_suspend;
data->early_suspend.resume = bma250_late_resume;
register_early_suspend(&data->early_suspend);
/* try to reduce the power comsuption */
bma250_set_mode(data->bma250_client, BMA250_MODE_SUSPEND);
return 0;
error_sysfs:
bma250_input_delete(data);
kfree_exit:
kfree(data);
exit:
return err;
}
static ssize_t bma250_selftest_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
unsigned long data;
unsigned char clear_value = 0;
int error;
short value1 = 0;
short value2 = 0;
short diff = 0;
unsigned long result = 0;
struct i2c_client *client = to_i2c_client(dev);
struct bma250_data *bma250 = i2c_get_clientdata(client);
error = strict_strtoul(buf, 10, &data);
if (error)
return error;
if (data != 1)
return -EINVAL;
/* set to 2 G range */
if (bma250_set_range(bma250->bma250_client, 0) < 0)
return -EINVAL;
bma250_smbus_write_byte(bma250->bma250_client, 0x32, &clear_value);
/* 1 for x-axis*/
bma250_set_selftest_st(bma250->bma250_client, 1);
/* positive direction*/
bma250_set_selftest_stn(bma250->bma250_client, 0);
mdelay(10);
bma250_read_accel_x(bma250->bma250_client, &value1);
/* negative direction*/
bma250_set_selftest_stn(bma250->bma250_client, 1);
mdelay(10);
bma250_read_accel_x(bma250->bma250_client, &value2);
diff = value1-value2;
printk(KERN_INFO "diff x is %d, value1 is %d, value2 is %d\n",
diff, value1, value2);
if (abs(diff) < 204)
result |= 1;
/* 2 for y-axis*/
bma250_set_selftest_st(bma250->bma250_client, 2);
/* positive direction*/
bma250_set_selftest_stn(bma250->bma250_client, 0);
mdelay(10);
bma250_read_accel_y(bma250->bma250_client, &value1);
/* negative direction*/
bma250_set_selftest_stn(bma250->bma250_client, 1);
mdelay(10);
bma250_read_accel_y(bma250->bma250_client, &value2);
diff = value1-value2;
printk(KERN_INFO "diff y is %d, value1 is %d, value2 is %d\n",
diff, value1, value2);
if (abs(diff) < 204)
result |= 2;
/* 3 for z-axis*/
bma250_set_selftest_st(bma250->bma250_client, 3);
/* positive direction*/
bma250_set_selftest_stn(bma250->bma250_client, 0);
mdelay(10);
bma250_read_accel_z(bma250->bma250_client, &value1);
/* negative direction*/
bma250_set_selftest_stn(bma250->bma250_client, 1);
mdelay(10);
bma250_read_accel_z(bma250->bma250_client, &value2);
diff = value1 - value2;
printk(KERN_INFO "diff z is %d, value1 is %d, value2 is %d\n",
diff, value1, value2);
if (abs(diff) < 102)
result |= 4;
atomic_set(&bma250->selftest_result, (unsigned int) result);
printk(KERN_INFO "self test finished\n");
return count;
}
static int bma250_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
int err = 0;
int tempvalue;
struct bma250_data *data;
printk(KERN_INFO "%s: entry \r\n", __func__);
if (bma250_set_power(true)) {
printk(KERN_ERR "%s: bma250_set_power(true) fail \r\n", __func__);
return -1;
}
msleep(10);
if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
printk(KERN_INFO "i2c_check_functionality error\n");
goto exit;
}
data = kzalloc(sizeof(struct bma250_data), GFP_KERNEL);
if (!data) {
err = -ENOMEM;
goto exit;
}
/* read chip id */
tempvalue = 0;
tempvalue = i2c_smbus_read_word_data(client, BMA250_CHIP_ID_REG);
if ((tempvalue&0x00FF) == BMA250_CHIP_ID) {
printk(KERN_INFO "Bosch Sensortec Device detected!\n" \
"BMA250 registered I2C driver!\n");
} else{
printk(KERN_INFO "Bosch Sensortec Device not found, \
i2c error %d \n", tempvalue);
err = -1;
goto kfree_exit;
}
i2c_set_clientdata(client, data);
data->bma250_client = client;
mutex_init(&data->mode_mutex);
mutex_init(&data->enable_mutex);
bma250_set_bandwidth(client, BMA250_BW_SET);
bma250_set_range(client, BMA250_RANGE_SET);
INIT_DELAYED_WORK(&data->work, bma250_work_func);
atomic_set(&data->delay, BMA250_DEFAULT_DELAY);
atomic_set(&data->enable, 0);
err = bma250_input_init(data);
if (err < 0)
goto kfree_exit;
err = sysfs_create_group(&data->input->dev.kobj,
&bma250_attribute_group);
if (err < 0)
goto error_sysfs;
#ifdef CONFIG_HAS_EARLYSUSPEND
data->early_suspend.level = EARLY_SUSPEND_LEVEL_BLANK_SCREEN + 1;
data->early_suspend.suspend = bma250_early_suspend;
data->early_suspend.resume = bma250_late_resume;
register_early_suspend(&data->early_suspend);
#endif
err = bma250_set_mode(client, BMA250_MODE_SUSPEND);
if (err)
goto error_sysfs;
printk(KERN_INFO "%s: success \r\n", __func__);
return 0;
error_sysfs:
bma250_input_delete(data);
kfree_exit:
kfree(data);
exit:
#if BMA250_PWROFF_EN
if (bma250_set_power(false)) {
printk(KERN_ERR "%s: bma250_set_power(false) fail \r\n", __func__);
}
#endif
return err;
}
int tcc_sensor_set_range(struct i2c_client *client,char range)
{
return bma250_set_range(client,range);
}
