C++ (Cpp) board_is_evm示例

示例#1

文件： board.c 项目： RobertCNelson/u-boot-boards

void sdram_init(void)
{
	/*
	 * EPOS EVM has 1GB LPDDR2 connected to EMIF.
	 * GP EMV has 1GB DDR3 connected to EMIF
	 * along with VTT regulator.
	 */
	if (board_is_eposevm()) {
		config_ddr(0, &ioregs_lpddr2, NULL, NULL, &emif_regs_lpddr2, 0);
	} else if (board_is_evm_14_or_later()) {
		enable_vtt_regulator();
		config_ddr(0, &ioregs_ddr3, NULL, NULL,
			   &ddr3_emif_regs_400Mhz_production, 0);
	} else if (board_is_evm_12_or_later()) {
		enable_vtt_regulator();
		config_ddr(0, &ioregs_ddr3, NULL, NULL,
			   &ddr3_emif_regs_400Mhz_beta, 0);
	} else if (board_is_evm()) {
		enable_vtt_regulator();
		config_ddr(0, &ioregs_ddr3, NULL, NULL,
			   &ddr3_emif_regs_400Mhz, 0);
	} else if (board_is_sk()) {
		config_ddr(400, &ioregs_ddr3, NULL, NULL,
			   &ddr3_sk_emif_regs_400Mhz, 0);
	} else if (board_is_idk()) {
		config_ddr(400, &ioregs_ddr3, NULL, NULL,
			   &ddr3_idk_emif_regs_400Mhz, 0);
	}
}

示例#2

文件： mux.c 项目： 0xFelix/u-boot-edminiv2

void enable_board_pin_mux(void)
{
	configure_module_pin_mux(mmc0_pin_mux);
	configure_module_pin_mux(i2c0_pin_mux);
	configure_module_pin_mux(mdio_pin_mux);

	if (board_is_evm()) {
		configure_module_pin_mux(gpio5_7_pin_mux);
		configure_module_pin_mux(rgmii1_pin_mux);
#if defined(CONFIG_NAND)
		configure_module_pin_mux(nand_pin_mux);
#endif
	} else if (board_is_sk() || board_is_idk()) {
		configure_module_pin_mux(rgmii1_pin_mux);
#if defined(CONFIG_NAND)
		printf("Error: NAND flash not present on this board\n");
#endif
		configure_module_pin_mux(qspi_pin_mux);
	} else if (board_is_eposevm()) {
		configure_module_pin_mux(rmii1_pin_mux);
#if defined(CONFIG_NAND)
		configure_module_pin_mux(nand_pin_mux);
#else
		configure_module_pin_mux(qspi_pin_mux);
#endif
	}
}

示例#3

文件： board.c 项目： RobertCNelson/u-boot-boards

int board_fit_config_name_match(const char *name)
{
	if (board_is_evm() && !strcmp(name, "am437x-gp-evm"))
		return 0;
	else if (board_is_sk() && !strcmp(name, "am437x-sk-evm"))
		return 0;
	else if (board_is_eposevm() && !strcmp(name, "am43x-epos-evm"))
		return 0;
	else if (board_is_idk() && !strcmp(name, "am437x-idk-evm"))
		return 0;
	else
		return -1;
}

示例#4

文件： board.c 项目： RobertCNelson/u-boot-boards

const struct dpll_params *get_dpll_ddr_params(void)
{
	int ind = get_sys_clk_index();

	if (board_is_eposevm())
		return &epos_evm_dpll_ddr[ind];
	else if (board_is_evm() || board_is_sk())
		return &gp_evm_dpll_ddr;
	else if (board_is_idk())
		return &idk_dpll_ddr;

	printf(" Board '%s' not supported\n", board_ti_get_name());
	return NULL;
}

示例#5

文件： board.c 项目： jsarenik/u-boot

int board_fit_config_name_match(const char *name)
{
	bool eeprom_read = board_ti_was_eeprom_read();

	if (!strcmp(name, "am4372-generic") && !eeprom_read)
		return 0;
	else if (board_is_evm() && !strcmp(name, "am437x-gp-evm"))
		return 0;
	else if (board_is_sk() && !strcmp(name, "am437x-sk-evm"))
		return 0;
	else if (board_is_eposevm() && !strcmp(name, "am43x-epos-evm"))
		return 0;
	else if (board_is_idk() && !strcmp(name, "am437x-idk-evm"))
		return 0;
	else
		return -1;
}