static int do_bootm_subcommand(cmd_tbl_t *cmdtp, int flag, int argc,
char * const argv[])
{
int ret = 0;
long state;
cmd_tbl_t *c;
boot_os_fn *boot_fn;
c = find_cmd_tbl(argv[1], &cmd_bootm_sub[0], ARRAY_SIZE(cmd_bootm_sub));
if (c) {
state = (long)c->cmd;
/* treat start special since it resets the state machine */
if (state == BOOTM_STATE_START) {
argc--;
argv++;
return bootm_start(cmdtp, flag, argc, argv);
}
} else {
/* Unrecognized command */
return CMD_RET_USAGE;
}
if (images.state < BOOTM_STATE_START ||
images.state >= state) {
printf("Trying to execute a command out of order\n");
return CMD_RET_USAGE;
}
images.state |= state;
boot_fn = boot_os[images.os.os];
switch (state) {
ulong load_end;
case BOOTM_STATE_START:
/* should never occur */
break;
case BOOTM_STATE_LOADOS:
ret = bootm_load_os(images.os, &load_end, 0);
if (ret)
return ret;
lmb_reserve(&images.lmb, images.os.load,
(load_end - images.os.load));
break;
#ifdef CONFIG_SYS_BOOT_RAMDISK_HIGH
case BOOTM_STATE_RAMDISK:
{
ulong rd_len = images.rd_end - images.rd_start;
char str[17];
ret = boot_ramdisk_high(&images.lmb, images.rd_start,
rd_len, &images.initrd_start, &images.initrd_end);
if (ret)
return ret;
sprintf(str, "%lx", images.initrd_start);
setenv("initrd_start", str);
sprintf(str, "%lx", images.initrd_end);
setenv("initrd_end", str);
}
break;
#endif
#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_LMB)
case BOOTM_STATE_FDT:
{
boot_fdt_add_mem_rsv_regions(&images.lmb,
images.ft_addr);
ret = boot_relocate_fdt(&images.lmb,
&images.ft_addr, &images.ft_len);
break;
}
#endif
case BOOTM_STATE_OS_CMDLINE:
ret = boot_fn(BOOTM_STATE_OS_CMDLINE, argc, argv, &images);
if (ret)
printf("cmdline subcommand not supported\n");
break;
case BOOTM_STATE_OS_BD_T:
ret = boot_fn(BOOTM_STATE_OS_BD_T, argc, argv, &images);
if (ret)
printf("bdt subcommand not supported\n");
break;
case BOOTM_STATE_OS_PREP:
ret = boot_fn(BOOTM_STATE_OS_PREP, argc, argv, &images);
if (ret)
printf("prep subcommand not supported\n");
break;
case BOOTM_STATE_OS_GO:
disable_interrupts();
#ifdef CONFIG_NETCONSOLE
/*
* Stop the ethernet stack if NetConsole could have
* left it up
*/
eth_halt();
#endif
arch_preboot_os();
boot_fn(BOOTM_STATE_OS_GO, argc, argv, &images);
break;
}
return ret;
}
/**
* Execute selected states of the bootm command.
*
* Note the arguments to this state must be the first argument, Any 'bootm'
* or sub-command arguments must have already been taken.
*
* Note that if states contains more than one flag it MUST contain
* BOOTM_STATE_START, since this handles and consumes the command line args.
*
* Also note that aside from boot_os_fn functions and bootm_load_os no other
* functions we store the return value of in 'ret' may use a negative return
* value, without special handling.
*
* @param cmdtp Pointer to bootm command table entry
* @param flag Command flags (CMD_FLAG_...)
* @param argc Number of subcommand arguments (0 = no arguments)
* @param argv Arguments
* @param states Mask containing states to run (BOOTM_STATE_...)
* @param images Image header information
* @param boot_progress 1 to show boot progress, 0 to not do this
* @return 0 if ok, something else on error. Some errors will cause this
* function to perform a reboot! If states contains BOOTM_STATE_OS_GO
* then the intent is to boot an OS, so this function will not return
* unless the image type is standalone.
*/
int do_bootm_states(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[],
int states, bootm_headers_t *images, int boot_progress)
{
boot_os_fn *boot_fn;
ulong iflag = 0;
int ret = 0, need_boot_fn;
images->state |= states;
/*
* Work through the states and see how far we get. We stop on
* any error.
*/
if (states & BOOTM_STATE_START)
ret = bootm_start(cmdtp, flag, argc, argv);
if (!ret && (states & BOOTM_STATE_FINDOS))
ret = bootm_find_os(cmdtp, flag, argc, argv);
if (!ret && (states & BOOTM_STATE_FINDOTHER)) {
ret = bootm_find_other(cmdtp, flag, argc, argv);
argc = 0; /* consume the args */
}
/* Load the OS */
if (!ret && (states & BOOTM_STATE_LOADOS)) {
ulong load_end;
iflag = bootm_disable_interrupts();
ret = bootm_load_os(images, &load_end, 0);
if (ret == 0)
lmb_reserve(&images->lmb, images->os.load,
(load_end - images->os.load));
else if (ret && ret != BOOTM_ERR_OVERLAP)
goto err;
else if (ret == BOOTM_ERR_OVERLAP)
ret = 0;
#if defined(CONFIG_SILENT_CONSOLE) && !defined(CONFIG_SILENT_U_BOOT_ONLY)
if (images->os.os == IH_OS_LINUX)
fixup_silent_linux();
#endif
}
/* Relocate the ramdisk */
#ifdef CONFIG_SYS_BOOT_RAMDISK_HIGH
if (!ret && (states & BOOTM_STATE_RAMDISK)) {
ulong rd_len = images->rd_end - images->rd_start;
ret = boot_ramdisk_high(&images->lmb, images->rd_start,
rd_len, &images->initrd_start, &images->initrd_end);
if (!ret) {
setenv_hex("initrd_start", images->initrd_start);
setenv_hex("initrd_end", images->initrd_end);
}
}
#endif
#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_LMB)
if (!ret && (states & BOOTM_STATE_FDT)) {
boot_fdt_add_mem_rsv_regions(&images->lmb, images->ft_addr);
ret = boot_relocate_fdt(&images->lmb, &images->ft_addr,
&images->ft_len);
}
#endif
/* From now on, we need the OS boot function */
if (ret)
return ret;
boot_fn = bootm_os_get_boot_func(images->os.os);
need_boot_fn = states & (BOOTM_STATE_OS_CMDLINE |
BOOTM_STATE_OS_BD_T | BOOTM_STATE_OS_PREP |
BOOTM_STATE_OS_FAKE_GO | BOOTM_STATE_OS_GO);
if (boot_fn == NULL && need_boot_fn) {
if (iflag)
enable_interrupts();
printf("ERROR: booting os '%s' (%d) is not supported\n",
genimg_get_os_name(images->os.os), images->os.os);
bootstage_error(BOOTSTAGE_ID_CHECK_BOOT_OS);
return 1;
}
/* Call various other states that are not generally used */
if (!ret && (states & BOOTM_STATE_OS_CMDLINE))
ret = boot_fn(BOOTM_STATE_OS_CMDLINE, argc, argv, images);
if (!ret && (states & BOOTM_STATE_OS_BD_T))
ret = boot_fn(BOOTM_STATE_OS_BD_T, argc, argv, images);
if (!ret && (states & BOOTM_STATE_OS_PREP))
ret = boot_fn(BOOTM_STATE_OS_PREP, argc, argv, images);
#ifdef CONFIG_TRACE
/* Pretend to run the OS, then run a user command */
if (!ret && (states & BOOTM_STATE_OS_FAKE_GO)) {
char *cmd_list = getenv("fakegocmd");
ret = boot_selected_os(argc, argv, BOOTM_STATE_OS_FAKE_GO,
images, boot_fn);
if (!ret && cmd_list)
ret = run_command_list(cmd_list, -1, flag);
}
#endif
/* Check for unsupported subcommand. */
if (ret) {
puts("subcommand not supported\n");
return ret;
}
/* Now run the OS! We hope this doesn't return */
if (!ret && (states & BOOTM_STATE_OS_GO))
ret = boot_selected_os(argc, argv, BOOTM_STATE_OS_GO,
images, boot_fn);
/* Deal with any fallout */
err:
if (iflag)
enable_interrupts();
if (ret == BOOTM_ERR_UNIMPLEMENTED)
bootstage_error(BOOTSTAGE_ID_DECOMP_UNIMPL);
else if (ret == BOOTM_ERR_RESET)
do_reset(cmdtp, flag, argc, argv);
return ret;
}
int do_bootm_subcommand (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
int ret = 0;
int state;
cmd_tbl_t *c;
boot_os_fn *boot_fn;
c = find_cmd_tbl(argv[1], &cmd_bootm_sub[0], ARRAY_SIZE(cmd_bootm_sub));
if (c) {
state = (int)c->cmd;
/* treat start special since it resets the state machine */
if (state == BOOTM_STATE_START) {
argc--;
argv++;
return bootm_start(cmdtp, flag, argc, argv);
}
}
/* Unrecognized command */
else {
cmd_usage(cmdtp);
return 1;
}
if (images.state >= state) {
printf ("Trying to execute a command out of order\n");
cmd_usage(cmdtp);
return 1;
}
images.state |= state;
boot_fn = boot_os[images.os.os];
switch (state) {
ulong load_end;
case BOOTM_STATE_START:
/* should never occur */
break;
case BOOTM_STATE_LOADOS:
ret = bootm_load_os(images.os, &load_end, 0);
if (ret)
return ret;
lmb_reserve(&images.lmb, images.os.load,
(load_end - images.os.load));
break;
#if defined(CONFIG_PPC) || defined(CONFIG_M68K) || defined(CONFIG_SPARC)
case BOOTM_STATE_RAMDISK:
{
ulong rd_len = images.rd_end - images.rd_start;
char str[17];
ret = boot_ramdisk_high(&images.lmb, images.rd_start,
rd_len, &images.initrd_start, &images.initrd_end);
if (ret)
return ret;
sprintf(str, "%lx", images.initrd_start);
setenv("initrd_start", str);
sprintf(str, "%lx", images.initrd_end);
setenv("initrd_end", str);
}
break;
#endif
#ifdef CONFIG_OF_LIBFDT
case BOOTM_STATE_FDT:
{
ulong bootmap_base = getenv_bootm_low();
ret = boot_relocate_fdt(&images.lmb, bootmap_base,
&images.ft_addr, &images.ft_len);
break;
}
#endif
case BOOTM_STATE_OS_CMDLINE:
ret = boot_fn(BOOTM_STATE_OS_CMDLINE, argc, argv, &images);
if (ret)
printf ("cmdline subcommand not supported\n");
break;
case BOOTM_STATE_OS_BD_T:
ret = boot_fn(BOOTM_STATE_OS_BD_T, argc, argv, &images);
if (ret)
printf ("bdt subcommand not supported\n");
break;
case BOOTM_STATE_OS_PREP:
ret = boot_fn(BOOTM_STATE_OS_PREP, argc, argv, &images);
if (ret)
printf ("prep subcommand not supported\n");
break;
case BOOTM_STATE_OS_GO:
disable_interrupts();
boot_fn(BOOTM_STATE_OS_GO, argc, argv, &images);
break;
}
return ret;
}
/**
* Execute selected states of the bootm command.
*
* Note the arguments to this state must be the first argument, Any 'bootm'
* or sub-command arguments must have already been taken.
*
* Note that if states contains more than one flag it MUST contain
* BOOTM_STATE_START, since this handles and consumes the command line args.
*
* Also note that aside from boot_os_fn functions and bootm_load_os no other
* functions we store the return value of in 'ret' may use a negative return
* value, without special handling.
*
* @param cmdtp Pointer to bootm command table entry
* @param flag Command flags (CMD_FLAG_...)
* @param argc Number of subcommand arguments (0 = no arguments)
* @param argv Arguments
* @param states Mask containing states to run (BOOTM_STATE_...)
* @param images Image header information
* @param boot_progress 1 to show boot progress, 0 to not do this
* @return 0 if ok, something else on error. Some errors will cause this
* function to perform a reboot! If states contains BOOTM_STATE_OS_GO
* then the intent is to boot an OS, so this function will not return
* unless the image type is standalone.
*/
static int do_bootm_states(cmd_tbl_t *cmdtp, int flag, int argc,
char * const argv[], int states, bootm_headers_t *images,
int boot_progress)
{
boot_os_fn *boot_fn;
ulong iflag = 0;
int ret = 0;
images->state |= states;
/*
* Work through the states and see how far we get. We stop on
* any error.
*/
if (states & BOOTM_STATE_START)
ret = bootm_start(cmdtp, flag, argc, argv);
if (!ret && (states & BOOTM_STATE_FINDOS))
ret = bootm_find_os(cmdtp, flag, argc, argv);
if (!ret && (states & BOOTM_STATE_FINDOTHER)) {
ret = bootm_find_other(cmdtp, flag, argc, argv);
argc = 0; /* consume the args */
}
/*
* We have reached the point of no return: we are going to
* overwrite all exception vector code, so we cannot easily
* recover from any failures any more...
*/
iflag = disable_interrupts();
#ifdef CONFIG_NETCONSOLE
/* Stop the ethernet stack if NetConsole could have left it up */
eth_halt();
#endif
#if defined(CONFIG_CMD_USB)
/*
* turn off USB to prevent the host controller from writing to the
* SDRAM while Linux is booting. This could happen (at least for OHCI
* controller), because the HCCA (Host Controller Communication Area)
* lies within the SDRAM and the host controller writes continously to
* this area (as busmaster!). The HccaFrameNumber is for example
* updated every 1 ms within the HCCA structure in SDRAM! For more
* details see the OpenHCI specification.
*/
usb_stop();
#endif
/* Load the OS */
if (!ret && (states & BOOTM_STATE_LOADOS)) {
ulong load_end;
ret = bootm_load_os(images, &load_end, 0);
if (ret && ret != BOOTM_ERR_OVERLAP)
goto err;
if (ret == 0)
lmb_reserve(&images->lmb, images->os.load,
(load_end - images->os.load));
else if (ret == BOOTM_ERR_OVERLAP)
ret = 0;
}
/* Relocate the ramdisk */
#ifdef CONFIG_SYS_BOOT_RAMDISK_HIGH
if (!ret && (states & BOOTM_STATE_RAMDISK)) {
ulong rd_len = images->rd_end - images->rd_start;
ret = boot_ramdisk_high(&images->lmb, images->rd_start,
rd_len, &images->initrd_start, &images->initrd_end);
if (!ret) {
setenv_hex("initrd_start", images->initrd_start);
setenv_hex("initrd_end", images->initrd_end);
}
}
#endif
#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_LMB)
if (!ret && (states & BOOTM_STATE_FDT)) {
boot_fdt_add_mem_rsv_regions(&images->lmb, images->ft_addr);
ret = boot_relocate_fdt(&images->lmb, &images->ft_addr,
&images->ft_len);
}
#endif
/* From now on, we need the OS boot function */
if (ret)
return ret;
boot_fn = boot_os[images->os.os];
if (boot_fn == NULL) {
if (iflag)
enable_interrupts();
printf("ERROR: booting os '%s' (%d) is not supported\n",
genimg_get_os_name(images->os.os), images->os.os);
bootstage_error(BOOTSTAGE_ID_CHECK_BOOT_OS);
return 1;
}
/* Call various other states that are not generally used */
if (!ret && (states & BOOTM_STATE_OS_CMDLINE))
ret = boot_fn(BOOTM_STATE_OS_CMDLINE, argc, argv, images);
if (!ret && (states & BOOTM_STATE_OS_BD_T))
ret = boot_fn(BOOTM_STATE_OS_BD_T, argc, argv, images);
if (!ret && (states & BOOTM_STATE_OS_PREP))
ret = boot_fn(BOOTM_STATE_OS_PREP, argc, argv, images);
#ifdef CONFIG_TRACE
/* Pretend to run the OS, then run a user command */
if (!ret && (states & BOOTM_STATE_OS_FAKE_GO)) {
char *cmd_list = getenv("fakegocmd");
ret = boot_selected_os(argc, argv, BOOTM_STATE_OS_FAKE_GO,
images, boot_fn);
if (!ret && cmd_list)
ret = run_command_list(cmd_list, -1, flag);
}
#endif
/* Now run the OS! We hope this doesn't return */
if (!ret && (states & BOOTM_STATE_OS_GO)) {
ret = boot_selected_os(argc, argv, BOOTM_STATE_OS_GO,
images, boot_fn);
if (ret)
goto err;
}
return ret;
/* Deal with any fallout */
err:
if (iflag)
enable_interrupts();
if (ret == BOOTM_ERR_UNIMPLEMENTED)
bootstage_error(BOOTSTAGE_ID_DECOMP_UNIMPL);
else if (ret == BOOTM_ERR_RESET)
do_reset(cmdtp, flag, argc, argv);
else
puts("subcommand not supported\n");
return ret;
}
