/*****************************************************************************
函 数 名 : dual_modem_wakeup_init
功能描述 : 初始化睡眠投票，初始化定时器，注册icc通信
输入参数 : 无
输出参数 : 0:成功，-1:失败
返 回 值 : int
*****************************************************************************/
int dual_modem_wakeup_init(DRV_DUAL_MODEM_STR DualModemNv)
{
struct softtimer_list *T1_timer =&g_dual_modem_ctrl.hold_wake_timer;
struct softtimer_list *T2_timer =&g_dual_modem_ctrl.sleep_timer;
T1_timer->func = modem_awaketimer_int;
T1_timer->para = 0;
T1_timer->timeout = DualModemNv.AwakeTmer;
T1_timer->wake_type = SOFTTIMER_NOWAKE;
T2_timer->func = modem_sleeptimer_int;
T2_timer->para = 0;
T2_timer->timeout= DualModemNv.DoSleepTimer;
T2_timer->wake_type = SOFTTIMER_NOWAKE;
wake_lock_init(&g_dual_modem_ctrl.wakelock ,PWRCTRL_SLEEP_UART0 ,"PWRCTRL_SLEEP_UART0");
g_dual_modem_ctrl.wakeup_3rdmodem_flag = DO_WAKEUP_3RD;
if(OK !=bsp_softtimer_create(T1_timer))
{
dm_print_err("T1_timer create fail!\n");
goto T1timerfail;
}
if(OK !=bsp_softtimer_create(T2_timer))
{
dm_print_err("T2_timer create fail!\n");
goto T2timerfail;
}
return OK;
T2timerfail:
bsp_softtimer_free(T1_timer);
T1timerfail:
return ERROR;
}
/*测试非唤醒源软timer申请和加入链表，在回调函数外删除软timer
超时时间较长*/
s32 st_softtimer_test_case13(void)
{
s32 ret= 0;
my_softtimer.func = for_softtimer_test_1;
my_softtimer.para = 123;
my_softtimer.timeout = 100;
my_softtimer.wake_type=SOFTTIMER_NOWAKE;
osl_sem_init(0,&sem1);
if (bsp_softtimer_create(&my_softtimer))
{
bsp_trace(BSP_LOG_LEVEL_ERROR,BSP_MODU_SOFTTIMER,"create error \n");
}
bsp_softtimer_add(&my_softtimer);
ret = bsp_softtimer_delete(&my_softtimer);
if (ret ==OK)
{
ret = bsp_softtimer_free(&my_softtimer);
if (ret !=OK)
{
bsp_trace(BSP_LOG_LEVEL_ERROR,BSP_MODU_SOFTTIMER,"softtimer_test_6 free error\n");
return ERROR;
}
}
else if(NOT_ACTIVE == ret)
{
osl_sem_down(&sem1);
osl_sema_delete(&sem1);
}
return ret;
}
/*测试非唤醒源软timer申请和加入链表,LOOP模式，执行一段时间后在回调函数外delete*/
s32 st_softtimer_test_case14(void)
{
s32 ret=0;
my_softtimer.func = for_softtimer_test_8;
my_softtimer.para = 123;
my_softtimer.timeout = 1;
my_softtimer.wake_type=SOFTTIMER_NOWAKE;
if (bsp_softtimer_create(&my_softtimer))
{
bsp_trace(BSP_LOG_LEVEL_ERROR,BSP_MODU_SOFTTIMER,"create error\n");
return ERROR;
}
bsp_softtimer_add(&my_softtimer);
delay(200);
ret = bsp_softtimer_delete_sync(&my_softtimer);
if(OK!=ret)
{
bsp_trace(BSP_LOG_LEVEL_ERROR,BSP_MODU_SOFTTIMER,"bsp_softtimer_delete_sync failed\n");
return ERROR;
}
ret = bsp_softtimer_free(&my_softtimer);
if (ret !=OK)
{
bsp_trace(BSP_LOG_LEVEL_ERROR,BSP_MODU_SOFTTIMER,"st_softtimer_test_case16 free error\n");
return ERROR;
}
return OK;
}
void for_softtimer_test_3(u32 para)
{
s32 ret = 0;
num[1]++;
if (num[1]<10)
{
ret = bsp_softtimer_modify(&my_softtimer,num[1]*100);
if (ret !=OK)
{
bsp_trace(BSP_LOG_LEVEL_ERROR,BSP_MODU_SOFTTIMER,"for_softtimer_test_3 11modify error\n");
return;
}
bsp_softtimer_add(&my_softtimer);
}
if (num[1]==10)
{
num[1] = 0;
ret = bsp_softtimer_free(&my_softtimer);
if (ret !=OK)
{
bsp_trace(BSP_LOG_LEVEL_ERROR,BSP_MODU_SOFTTIMER,"for_softtimer_test_3 free error\n");
return;
}
osl_sem_up(&sem3);
}
return;
}
s32 edma2_stress_test_stop()
{
set_test_switch_stat(EDMAC, TEST_STOP);
while(OK == taskIdVerify(g_edma2_busstress_info.edma_stress_test_task_id))
{
taskDelay(100);
}
if (NULL != g_edma2_busstress_info.edma_send_sem)
{
/*sema_delete(g_edma2_busstress_info.edma_send_sem);*/
semDelete(g_edma2_busstress_info.edma_send_sem);
}
bsp_softtimer_delete_sync(&g_edma2_busstress_info.edma_softtimer_list);
bsp_softtimer_free(&g_edma2_busstress_info.edma_softtimer_list);
cacheDmaFree(g_edma2_busstress_info.stDMATaskHandle[0].u32SrcAddr);
cacheDmaFree(g_edma2_busstress_info.stDMATaskHandle[0].u32DstAddr);
cacheDmaFree(g_edma2_busstress_info.stDMATaskHandle[1].u32SrcAddr);
cacheDmaFree(g_edma2_busstress_info.stDMATaskHandle[3].u32DstAddr);
return OK;
}
/******************************************************************************
* Function: power_off_timeout_isr
* Description: 如果应用没有一定时间内关机，底层直接关机
* Input:
* None
* Output:
* None
* Return:
* None
* Note :
********************************************************************************/
static int power_off_timeout_isr( void )
{
pr_dbg("power_off_timeout_isr, reason :%d\n ",power_off_ctrl.reason);
(void)bsp_softtimer_free(&power_off_ctrl.off_timer);
power_off_excecute(power_off_ctrl.reason);
return 0;
}
/*****************************************************************************
函 数 名 : power_off_timeout_isr
功能描述 : 开机定时器处理，检测C核状态
输入参数 :
输出参数 : 无
返 回 值 :
调用函数 :
被调函数 :
*****************************************************************************/
static int power_on_timeout_isr( void )
{
c_power_st_e status = POWER_OS_OK;
DRV_RUN_MODE run_mode = get_run_mode();
pr_dbg("power_on_timeout_isr, system had been powered one minute ago\n ");
#if (MBB_CHARGE == FEATURE_ON)
if(chg_is_powdown_charging())
{
pr_dbg("CHG:no need to check c core status!\n ");
return 0;
}
#endif /*MBB_CHG_PLATFORM_V7R2*/
if(RUN_MODE_NORMAL == run_mode)
{
/* 读取C核启动状态 */
status = power_on_c_status_get();
#if defined(DRV_BUILD_SEPARATE)
/* C核异常，设置normal模式启动失败 */
if(status < POWER_BSP_OK)
#else
if(status < POWER_MSP_OK)
#endif
{
pr_dbg("c core power on fail!\n ");
/* 进入recovery模式 */
bsp_drv_power_reboot();
/* coverity[no_escape] */
for(;;) ;
}
}
else if(RUN_MODE_RECOVERY == run_mode){
/* for test */
#if 0
bsp_drv_power_reboot();
/* 等待系统重启 */
while(1);
#endif
}
pr_dbg("system power on ok!\n ");
/* clear warm boot cnt */
power_on_wdt_cnt_set();
(void)bsp_softtimer_free(&power_item_info.on_timer);
return 0;
}
void for_softtimer_test_6(u32 para)
{
s32 ret;
ret = bsp_softtimer_free(&my_thir_softtimer);
if (ret !=OK)
{
bsp_trace(BSP_LOG_LEVEL_ERROR,BSP_MODU_SOFTTIMER,"for_softtimer_test_6 free error\n");
return ;
}
osl_sem_up(&sem6);
return ;
}
void for_softtimer_test_2(u32 para)
{
s32 ret = 0;
num[0]++;
if (num[0]<10)
{
bsp_softtimer_add(&my_softtimer);
}
else if (num[0]==10)
{
num[0] = 0;
ret = bsp_softtimer_free(&my_softtimer);
if (ret !=OK)
{
bsp_trace(BSP_LOG_LEVEL_ERROR,BSP_MODU_SOFTTIMER,"for_softtimer_test_2 free error\n");
return;
}
osl_sem_up(&sem2);
}
return;
}
/*在case15或case16运行的情况下运行本测试用例，测试是否可以删除多个定时器*/
s32 st_softtimer_test_case17(void)
{
int i = 0;
int ret;
while(i<31)
{
ret = bsp_softtimer_delete_sync(&myown_timer[i]);
if(OK!=ret)
{
bsp_trace(BSP_LOG_LEVEL_ERROR,BSP_MODU_SOFTTIMER,"bsp_softtimer_delete_sync failed\n");
return ERROR;
}
ret = bsp_softtimer_free(&myown_timer[i]);
if(OK!=ret)
{
bsp_trace(BSP_LOG_LEVEL_ERROR,BSP_MODU_SOFTTIMER,"bsp_softtimer_free failed\n");
return ERROR;
}
i++;
}
return OK;
}
s32 edma2_stress_test_start(s32 task_priority,s32 test_rate)
{
s32 ret = 0;
u32 index = 0;
s32 chann_id = 0;/*bsp_edma_channel_init(EDMA_MEMORY, 0, 0, 0);*/
for (index=0;index<EDMA_HANDLE_NUM;index++)
{
g_edma2_busstress_info.stDMATaskHandle[index].ulChIdx = chann_id;
}
logMsg("edma2_stress: use axi 0x%x \n", MEM_FOR_EDMAC2_BUSSTRESS,0,0,0,0,0);
/*
g_edma2_busstress_info.stDMATaskHandle[0] = {0, 0, EDMA_TEST_LEN, chann_id};
g_edma2_busstress_info.stDMATaskHandle[1] = {0, EDMA2_HANDLE_1_AXI_MEM_64_DST, EDMA_TEST_LEN, chann_id};
g_edma2_busstress_info.stDMATaskHandle[2] = {EDMA2_HANDLE_2_AXI_MEM_64_SRC, EDMA2_HANDLE_2_AXI_MEM_64_DST, EDMA_TEST_LEN, chann_id};
g_edma2_busstress_info.stDMATaskHandle[3] = {EDMA2_HANDLE_3_AXI_MEM_64_SRC, 0, EDMA_TEST_LEN, chann_id};
*/
set_test_switch_stat(EDMAC, TEST_RUN);
/*创建控制发送速率的信号量*/
/*sema_init(&(g_edma2_busstress_info.edma_send_sem) , SEM_EMPTY);*/
g_edma2_busstress_info.edma_send_sem = semBCreate(SEM_Q_FIFO, SEM_EMPTY);
if (g_edma2_busstress_info.edma_send_sem == NULL)
{
printf("semBCreate gmac_send_sem fail.\n");
return ERROR;
}
g_edma2_busstress_info.edma_softtimer_list.func = ( softtimer_func )edma2_timer_event;
g_edma2_busstress_info.edma_softtimer_list.para = 0;
g_edma2_busstress_info.edma_softtimer_list.timeout = test_rate;
g_edma2_busstress_info.edma_softtimer_list.wake_type =SOFTTIMER_NOWAKE;
/*创建控制发送速率 的软timer*/
if( bsp_softtimer_create(&g_edma2_busstress_info.edma_softtimer_list))
{
printf("SOFTTIMER_CREATE_TIMER fail.\n");
/*sema_delete(g_edma2_busstress_info.edma_send_sem);*/
semDelete(g_edma2_busstress_info.edma_send_sem);
return ERROR;
}
g_edma2_busstress_info.stDMATaskHandle[0].u32SrcAddr = (u32)cacheDmaMalloc(EDMA_TEST_LEN);
g_edma2_busstress_info.stDMATaskHandle[0].u32DstAddr = (u32)cacheDmaMalloc(EDMA_TEST_LEN);
g_edma2_busstress_info.stDMATaskHandle[1].u32SrcAddr = (u32)cacheDmaMalloc(EDMA_TEST_LEN);
g_edma2_busstress_info.stDMATaskHandle[3].u32DstAddr = (u32)cacheDmaMalloc(EDMA_TEST_LEN);
/*创建发包测试任务，收包驱动会自行做处理*/
g_edma2_busstress_info.edma_stress_test_task_id \
= taskSpawn ("edmaBusTask", task_priority, 0, 20000, (FUNCPTR)edma2_stress_test_routine, 0,
0, 0, 0,0, 0, 0, 0, 0, 0);
if(g_edma2_busstress_info.edma_stress_test_task_id == ERROR)
{
printf("taskSpawn edma2BusTask fail.\n");
/*sema_delete(g_edma2_busstress_info.edma_send_sem);*/
semDelete(g_edma2_busstress_info.edma_send_sem);
ret = bsp_softtimer_free(&g_edma2_busstress_info.edma_softtimer_list);
}
else
{
bsp_softtimer_add( &g_edma2_busstress_info.edma_softtimer_list );
}
return g_edma2_busstress_info.edma_stress_test_task_id;
}
