static int imapx200_dma_stop(struct imapx200_dma_chan *chan)
{
struct imapx200_dmac *dmac= chan->dmac;
u32 config;
int timeout;
pr_debug("%s: stopping channel\n", __func__);
config = chan_readl(chan,CFG_LO);
config |= DWC_CFGL_CH_SUSP;
chan_writel(chan,CFG_LO,config);
timeout = 1000;
do {
config = chan_readl(chan,CFG_LO);
pr_debug("%s: %d - config %08x\n", __func__, timeout, config);
if (config & DWC_CFGL_CH_SUSP)
udelay(10);
else
break;
} while (--timeout > 0);
if (config & DWC_CFGL_CH_SUSP) {
printk(KERN_ERR "%s: channel still active\n", __func__);
return -EFAULT;
}
dma_clear_bit(dmac,CH_EN,chan->bit);
return 0;
}
static void dbg_showchan(struct imapx200_dma_chan *chan)
{
pr_debug("DMA%d: %08x->%08x L %08x CTL_L0 %08x, CTL_H0%08x \n",
chan->number,
chan_readl(chan,SAR),
chan_readl(chan,DAR),
chan_readl(chan,LLP),
chan_readl(chan,CTL_LO),
chan_readl(chan,CTL_HI)
);
}
static inline void dma_chan_irq(struct hsu_dma_chan *chan)
{
struct uart_hsu_port *up = chan->uport;
unsigned long flags;
u32 int_sts;
spin_lock_irqsave(&up->port.lock, flags);
if (!up->use_dma || !up->running)
goto exit;
/*
* No matter what situation, need read clear the IRQ status
* There is a bug, see Errata 5, HSD 2900918
*/
int_sts = chan_readl(chan, HSU_CH_SR);
/* Rx channel */
if (chan->dirt == DMA_FROM_DEVICE)
hsu_dma_rx(up, int_sts);
/* Tx channel */
if (chan->dirt == DMA_TO_DEVICE) {
chan_writel(chan, HSU_CH_CR, 0x0);
up->dma_tx_on = 0;
hsu_dma_tx(up);
}
exit:
spin_unlock_irqrestore(&up->port.lock, flags);
return;
}
/* This is always called in spinlock protected mode, so
* modify timeout timer is safe here */
void hsu_dma_rx(struct uart_hsu_port *up, u32 int_sts)
{
struct hsu_dma_buffer *dbuf = &up->rxbuf;
struct hsu_dma_chan *chan = up->rxc;
struct uart_port *port = &up->port;
struct tty_struct *tty = port->state->port.tty;
int count;
if (!tty)
return;
/*
* First need to know how many is already transferred,
* then check if its a timeout DMA irq, and return
* the trail bytes out, push them up and reenable the
* channel
*/
/* Timeout IRQ, need wait some time, see Errata 2 */
if (int_sts & 0xf00)
udelay(2);
/* Stop the channel */
chan_writel(chan, HSU_CH_CR, 0x0);
count = chan_readl(chan, HSU_CH_D0SAR) - dbuf->dma_addr;
if (!count) {
/* Restart the channel before we leave */
chan_writel(chan, HSU_CH_CR, 0x3);
return;
}
dma_sync_single_for_cpu(port->dev, dbuf->dma_addr,
dbuf->dma_size, DMA_FROM_DEVICE);
/*
* Head will only wrap around when we recycle
* the DMA buffer, and when that happens, we
* explicitly set tail to 0. So head will
* always be greater than tail.
*/
tty_insert_flip_string(tty, dbuf->buf, count);
port->icount.rx += count;
dma_sync_single_for_device(up->port.dev, dbuf->dma_addr,
dbuf->dma_size, DMA_FROM_DEVICE);
/* Reprogram the channel */
chan_writel(chan, HSU_CH_D0SAR, dbuf->dma_addr);
chan_writel(chan, HSU_CH_D0TSR, dbuf->dma_size);
chan_writel(chan, HSU_CH_DCR, 0x1
| (0x1 << 8)
| (0x1 << 16)
| (0x1 << 24) /* timeout bit, see HSU Errata 1 */
);
tty_flip_buffer_push(tty);
chan_writel(chan, HSU_CH_CR, 0x3);
}
int imapx200_dma_getposition(unsigned int channel,
dma_addr_t *src, dma_addr_t *dst)
{
struct imapx200_dma_chan *chan = imap_dma_lookup_channel(channel);
WARN_ON(!chan);
if (!chan)
return -EINVAL;
if (src != NULL)
*src = chan_readl(chan,SAR);
if (dst != NULL)
*dst = chan_readl(chan,DAR);
return 0;
}
static void hsu_dma_rx_timeout(unsigned long data)
{
struct hsu_dma_chan *chan = (void *)data;
struct uart_hsu_port *up = chan->uport;
struct hsu_dma_buffer *dbuf = &up->rxbuf;
int count = 0;
unsigned long flags;
spin_lock_irqsave(&up->port.lock, flags);
count = chan_readl(chan, HSU_CH_D0SAR) - dbuf->dma_addr;
if (!count) {
mod_timer(&chan->rx_timer, jiffies + HSU_DMA_TIMEOUT_CHECK_FREQ);
goto exit;
}
hsu_dma_rx(up, 0);
exit:
spin_unlock_irqrestore(&up->port.lock, flags);
}
static void imapx200_dma_fill_lli(struct imapx200_dma_chan *chan,
struct dw_lli *lli,
dma_addr_t data, int size)
{
dma_addr_t src, dst;
u32 control0, control1;
control0 = chan_readl(chan,CTL_LO);
switch (chan->source) {
case IMAPX200_DMA_P2M:
src = chan->dev_addr;
dst = data;
control0 |= DWC_CTLL_DST_WIDTH(chan->hw_width);
control0 |= DWC_CTLL_SRC_WIDTH(2);
control0 |= DWC_CTLL_DST_INC;
break;
case IMAPX200_DMA_M2P:
src = data;
dst = chan->dev_addr;
control0 |= DWC_CTLL_DST_WIDTH(2);
control0 |= DWC_CTLL_SRC_WIDTH(chan->hw_width);
control0 |= DWC_CTLL_SRC_INC;
break;
default:
BUG();
}
/* note, we do not currently setup any of the burst controls */
control1 = size >> chan->hw_width; /* size in no of xfers */
lli->sar = src;
lli->dar = dst;
lli->llp = 0;
lli->ctllo = control0;
lli->ctlhi = control1;
}
static ssize_t dma_show_regs(struct file *file, char __user *user_buf,
size_t count, loff_t *ppos)
{
struct hsu_dma_chan *chan = file->private_data;
char *buf;
u32 len = 0;
ssize_t ret;
buf = kzalloc(HSU_REGS_BUFSIZE, GFP_KERNEL);
if (!buf)
return 0;
len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
"MFD HSU DMA channel [%d] regs:\n", chan->id);
len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
"=================================\n");
len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
"CR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_CR));
len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
"DCR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_DCR));
len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
"BSR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_BSR));
len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
"MOTSR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_MOTSR));
len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
"D0SAR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_D0SAR));
len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
"D0TSR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_D0TSR));
len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
"D0SAR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_D1SAR));
len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
"D0TSR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_D1TSR));
len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
"D0SAR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_D2SAR));
len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
"D0TSR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_D2TSR));
len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
"D0SAR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_D3SAR));
len += snprintf(buf + len, HSU_REGS_BUFSIZE - len,
"D0TSR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_D3TSR));
if (len > HSU_REGS_BUFSIZE)
len = HSU_REGS_BUFSIZE;
ret = simple_read_from_buffer(user_buf, count, ppos, buf, len);
kfree(buf);
return ret;
}
int imapx200_dma_devconfig(int channel,
enum imapx200_dmafc source,
unsigned long devaddr)
{
struct imapx200_dma_chan *chan = imap_dma_lookup_channel(channel);
u32 peripheral;
u32 ctlx = 0;
u32 intrx = 0;
u32 cfg_hi = 0;
u32 cfg_lo = 0;
pr_debug("%s: channel %d, source %d, dev %08lx, chan %p\n",
__func__, channel, source, devaddr, chan);
WARN_ON(!chan);
if (!chan)
return -EINVAL;
peripheral = (chan->peripheral & 0x7);
chan->source = source;
chan->dev_addr = devaddr;
pr_debug("%s: peripheral %d\n", __func__, peripheral);
ctlx = chan_readl(chan,CTL_LO);
pr_debug("devconfig_1\n");
ctlx &= ~DWC_CTLL_FC_MASK;
cfg_hi = chan_readl(chan,CFG_HI);
pr_debug("CFG_HI is %x\n", cfg_hi);
cfg_lo = chan_readl(chan,CFG_LO);
pr_debug("devconfig_3\n");
switch (source) {
case IMAPX200_DMA_M2M:
ctlx |= DWC_CTLL_FC_M2M;
break;
case IMAPX200_DMA_M2P:
ctlx |= DWC_CTLL_FC_M2P;
cfg_lo &= ~DWC_CFGL_HS_DST;
cfg_hi |= DWC_CFGH_DST_PER(chan->client->handshake);
break;
case IMAPX200_DMA_P2M:
ctlx |= DWC_CTLL_FC_P2M;
cfg_lo &= ~DWC_CFGL_HS_SRC;
cfg_hi |= DWC_CFGH_SRC_PER(chan->client->handshake);
break;
default:
printk(KERN_ERR "%s: bad source\n", __func__);
return -EINVAL;
}
/*set dma flow control bit*/
chan_writel(chan,CTL_LO,ctlx);
pr_debug("devconfig_4\n");
chan_writel(chan,CFG_LO,cfg_lo);
pr_debug("devconfig_5\n");
chan_writel(chan,CFG_HI,cfg_hi);
// cfg_hi = chan_readl(chan,CFG_HI);
// pr_debug("CFG_HI is %x\n", cfg_hi);
/* allow TC and ERR interrupts */
intrx = 1<<(chan->number);
pr_debug("devconfig_6\n");
dma_set_bit(chan->dmac,MASK.XFER,intrx);
pr_debug("devconfig_7\n");
dma_set_bit(chan->dmac,MASK.BLOCK,intrx);
dma_set_bit(chan->dmac,MASK.ERROR,intrx);
pr_debug("devconfig_8\n");
return 0;
}
