PMU_STATUS BAT_ConstantCurrentModeAction(void)
{
battery_log(BAT_LOG_CRTI, "[BATTERY] CC mode charge, timer=%d on %d !!\n\r",
BMT_status.CC_charging_time, BMT_status.total_charging_time);
BMT_status.PRE_charging_time = 0;
BMT_status.CC_charging_time += BAT_TASK_PERIOD;
BMT_status.TOPOFF_charging_time = 0;
BMT_status.total_charging_time += BAT_TASK_PERIOD;
ulc_cv_charging_current_flag = KAL_FALSE;
ulc_cv_charging_current = g_temp_CC_value;
if (BMT_status.bat_vol > v_cc2topoff_threshold) {
BMT_status.bat_charging_state = CHR_TOP_OFF;
}
#if defined(CONFIG_MTK_PUMP_EXPRESS_SUPPORT)//defined(MTK_LINEAR_CHARGER_NO_DISCHARGE)
// no disable charging#else
#else
{
kal_bool charging_enable = KAL_FALSE;
/* Charging 9s and discharging 1s : start */
battery_charging_control(CHARGING_CMD_ENABLE, &charging_enable);
msleep(1000);
}
#endif
charging_current_calibration();
pchr_turn_on_charging();
return PMU_STATUS_OK;
}
PMU_STATUS BAT_ConstantCurrentModeAction(void)
{
kal_bool charging_enable = KAL_FALSE;
battery_xlog_printk(BAT_LOG_CRTI, "[BATTERY] CC mode charge, timer=%ld on %ld !!\n\r", BMT_status.CC_charging_time, BMT_status.total_charging_time);
BMT_status.PRE_charging_time = 0;
BMT_status.CC_charging_time += BAT_TASK_PERIOD;
BMT_status.TOPOFF_charging_time = 0;
BMT_status.total_charging_time += BAT_TASK_PERIOD;
if ( BMT_status.bat_vol > v_cc2topoff_threshold )
{
BMT_status.bat_charging_state = CHR_TOP_OFF;
}
/*Charging 9s and discharging 1s : start*/
battery_charging_control(CHARGING_CMD_ENABLE,&charging_enable);
msleep(1000);
charging_current_calibration();
pchr_turn_on_charging();
return PMU_STATUS_OK;
}
PMU_STATUS BAT_PreChargeModeAction(void)
{
kal_bool charging_enable = KAL_FALSE;
battery_xlog_printk(BAT_LOG_CRTI, "[BATTERY] Pre-CC mode charge, timer=%ld on %ld !!\n\r", BMT_status.PRE_charging_time, BMT_status.total_charging_time);
BMT_status.PRE_charging_time += BAT_TASK_PERIOD;
BMT_status.CC_charging_time = 0;
BMT_status.TOPOFF_charging_time = 0;
BMT_status.total_charging_time += BAT_TASK_PERIOD;
if (BMT_status.UI_SOC == 100)
{
BMT_status.bat_charging_state = CHR_BATFULL;
BMT_status.bat_full = KAL_TRUE;
g_charging_full_reset_bat_meter = KAL_TRUE;
}
else if(BMT_status.bat_vol > V_PRE2CC_THRES)
{
BMT_status.bat_charging_state = CHR_CC;
}
/*Charging 9s and discharging 1s : start*/
battery_charging_control(CHARGING_CMD_ENABLE,&charging_enable);
msleep(1000);
charging_current_calibration();
pchr_turn_on_charging();
return PMU_STATUS_OK;
}
PMU_STATUS BAT_PreChargeModeAction(void)
{
battery_log(BAT_LOG_CRTI, "[BATTERY] Pre-CC mode charge, timer=%d on %d !!\n\r",
BMT_status.PRE_charging_time, BMT_status.total_charging_time);
BMT_status.PRE_charging_time += BAT_TASK_PERIOD;
BMT_status.CC_charging_time = 0;
BMT_status.TOPOFF_charging_time = 0;
BMT_status.total_charging_time += BAT_TASK_PERIOD;
select_charging_curret();
ulc_cv_charging_current = g_temp_CC_value;
ulc_cv_charging_current_flag = KAL_FALSE;
if (BMT_status.UI_SOC == 100) {
BMT_status.bat_charging_state = CHR_BATFULL;
BMT_status.bat_full = KAL_TRUE;
g_charging_full_reset_bat_meter = KAL_TRUE;
} else if (BMT_status.bat_vol > batt_cust_data.v_pre2cc_thres) {
BMT_status.bat_charging_state = CHR_CC;
}
#if defined(CONFIG_MTK_PUMP_EXPRESS_SUPPORT)//defined(MTK_LINEAR_CHARGER_NO_DISCHARGE)
// no disable charging
#else
{
kal_bool charging_enable = KAL_FALSE;
/*Charging 9s and discharging 1s : start */
battery_charging_control(CHARGING_CMD_ENABLE, &charging_enable);
msleep(1000);
}
#endif
charging_current_calibration();
pchr_turn_on_charging();
return PMU_STATUS_OK;
}
