void loop(){
if(!started){
print("Program active\n\n",0);
started=true;
};
for(int i=0;i<11;i++){ // count over LED pairs
if(i==0) {
if(cycleCount < 4){
cycleCount++;
} else reInit(); // reinit after 3 incomplete cycles
};
if(checkCompletion() == -1 && haltUntilFirstTouch) { i=0;} // stalls the sequence on position 1 until that is touched
print("Pair ",0); print(i,0); print(" is on.\n",0);
killLEDs();
lightLEDpair(i);
for(int j=0;j<25;j++){ // split delays in about 10-20ms to have steady timing
if(fridgeUnlocked) unlock();
checkNodes();
int completedStep = checkSequence();
if((completedStep >= 0) &&
(completedStep != previousCycle) &&
(touchLEDcorrespondence[completedStep] < i+1)) { // if the LEDs are ahead of the user, restart at the user's current position
previousCycle = completedStep;
i = touchLEDcorrespondence[completedStep]; // it seems if i=0 here the next loop is executed with i=1
if(i == 0) revertTo0 = true;
print("Reverted to pair ",0);print(i,0);print("\n",0);
break;
}
previousCycle = completedStep;
delay((LEDpairs[i][4]/25));
}
if(revertTo0){
revertTo0 = false;
break; // break main for loop to get i=0
}
if(fridgeUnlocked){
print("Successfully unlocked!\n\n",0);
lightLEDpair(10);
for(int j=0;j<3;j++){
delay(2500);
killLEDs();
delay(1500);
lightLEDpair(10);
};
delay(3000);
reInit();
break;
};
}
}
/*--------------------------------------------------------*/
int AzTree::leafNum() const
{
checkNodes("leafNum");
int leaf_num = 0;
int nx;
for (nx = 0; nx < nodes_used; ++nx) {
if (nodes[nx].isLeaf()) {
++leaf_num;
}
}
return leaf_num;
}
void
NIImporter_VISUM::parse_EdgePolys() {
// get the from- & to-node and validate them
NBNode* from = getNamedNode("VonKnot", "VonKnotNr");
NBNode* to = getNamedNode("NachKnot", "NachKnotNr");
if (!checkNodes(from, to)) {
return;
}
bool failed = false;
int index;
SUMOReal x, y;
try {
index = TplConvert::_2int(myLineParser.get("INDEX").c_str());
x = getNamedFloat("XKoord");
y = getNamedFloat("YKoord");
} catch (NumberFormatException&) {
WRITE_ERROR("Error in geometry description from node '" + from->getID() + "' to node '" + to->getID() + "'.");
return;
}
Position pos(x, y);
if (!NILoader::transformCoordinates(pos)) {
WRITE_ERROR("Unable to project coordinates for node '" + from->getID() + "'.");
return;
}
NBEdge* e = from->getConnectionTo(to);
if (e != 0) {
e->addGeometryPoint(index, pos);
} else {
failed = true;
}
e = to->getConnectionTo(from);
if (e != 0) {
e->addGeometryPoint(-index, pos);
failed = false;
}
// check whether the operation has failed
if (failed) {
// we should report this to the warning instance only if we have removed
// some nodes or edges...
if (OptionsCont::getOptions().isSet("keep-edges.min-speed") || OptionsCont::getOptions().isSet("keep-edges.explicit")) {
WRITE_WARNING("Could not set geometry between node '" + from->getID() + "' and node '" + to->getID() + "'.");
} else {
// ... in the other case we report this to the error instance
if (OptionsCont::getOptions().getBool("visum.verbose-warnings")) {
WRITE_WARNING("There is no edge from node '" + from->getID() + "' to node '" + to->getID() + "'.");
}
}
}
}
void checkNodes( const std::shared_ptr< spec_reader::SpecNode > specNode, size_t level = 0 )
{
std::shared_ptr< spec_reader::SpecNode > sn = specNode;
bool end = false;
while( ! end )
{
LOG_INFO( common::details::kColorGreen << std::setw( 3 * level + 2 ) << "* " << sn->getId() << common::details::kColorStd );
if( sn->isGroup() )
{
checkNodes( sn->firstChild(), level + 1 );
}
sn = sn->next();
if( sn == nullptr )
end = true;
}
}
/*--------------------------------------------------------*/
void AzTree::clean_up()
{
checkNodes("clean_up");
int nx;
for (nx = 0; nx < nodes_used; ++nx) {
if (!nodes[nx].isLeaf()) continue;
/*--- add non-leaf weights to the leaf weight ---*/
int px = nodes[nx].parent_nx;
for ( ; ; ) {
if (px < 0) break;
nodes[nx].weight += nodes[px].weight;
px = nodes[px].parent_nx;
}
}
for (nx = 0; nx < nodes_used; ++nx) {
if (nodes[nx].isLeaf()) continue;
nodes[nx].weight = 0; /* zero-out non-leaf weights */
}
}
Trie::Trie(const QHash<QString, QStringList>& words)
{
TrieGenerator generator(words);
generator.run(m_nodes, m_spellings);
checkNodes();
}
Trie::Trie(const QString& word)
{
TrieGenerator generator(word);
generator.run(m_nodes, m_spellings);
checkNodes();
}
MainWindow::MainWindow(QWidget* parent)
: QMainWindow(parent), m_view(0)
{
m_hostInfoManager = new HostInfoManager;
m_monitor = new Monitor(m_hostInfoManager, this);
m_viewMode = new QActionGroup(this);
QMenu* fileMenu = menuBar()->addMenu(tr("&File"));
QAction* quitAction = fileMenu->addAction(tr("&Quit"));
quitAction->setShortcut(QKeySequence::Quit);
connect(quitAction, SIGNAL(triggered()), qApp, SLOT(quit()));
QMenu* viewMenu = menuBar()->addMenu(tr("&View"));
QMenu* modeMenu = viewMenu->addMenu(tr("&Mode"));
m_listView = modeMenu->addAction(tr("&List View"));
m_listView->setCheckable(true);
m_viewMode->addAction(m_listView);
connect(m_listView, SIGNAL(triggered()), this, SLOT(setupListView()));
m_starView = modeMenu->addAction(tr("&Star View"));
m_starView->setCheckable(true);
m_viewMode->addAction(m_starView);
connect(m_starView, SIGNAL(triggered()), this, SLOT(setupStarView()));
m_detailedView = modeMenu->addAction(tr("&Detailed Host View"));
m_detailedView->setCheckable(true);
m_viewMode->addAction(m_detailedView);
connect(m_detailedView, SIGNAL(triggered()), this, SLOT(setupDetailedHostView()));
QAction* actionStart = viewMenu->addAction(tr("&Start"));
connect(actionStart, SIGNAL(triggered()), this, SLOT(startView()));
QAction* actionStop = viewMenu->addAction(tr("Stop"));
connect(actionStop, SIGNAL(triggered()), this, SLOT(stopView()));
viewMenu->addSeparator();
QAction* actionCheckNodes = viewMenu->addAction(tr("Check Nodes"));
connect(actionCheckNodes, SIGNAL(triggered()), this, SLOT(checkNodes()));
viewMenu->addSeparator();
m_configView = viewMenu->addAction(tr("Configure View..."));
connect(m_configView, SIGNAL(triggered()), this, SLOT( configureView()));
m_systrayAction = viewMenu->addAction(tr("System Tray"));
m_systrayAction->setCheckable(true);
QMenu* helpMenu = menuBar()->addMenu(tr("&Help"));
helpMenu->addAction(tr("About..."), this, SLOT(showAboutDialog()));
readSettings();
// Avoid useless creation and connection if the system does not have a systray
if (QSystemTrayIcon::isSystemTrayAvailable()) {
m_systemTrayIcon = new QSystemTrayIcon(this);
m_systemTrayIcon->setIcon(QIcon(":bigIcon.png"));
m_systemTrayMenu = new QMenu(this);
m_systemTrayMenu->addAction(quitAction);
m_systemTrayIcon->setContextMenu(m_systemTrayMenu);
connect(m_systemTrayIcon, SIGNAL(activated(QSystemTrayIcon::ActivationReason)),
this, SLOT(systemTrayIconActivated(QSystemTrayIcon::ActivationReason)));
connect(m_systrayAction, SIGNAL(triggered(bool)), m_systemTrayIcon, SLOT(setVisible(bool)));
// Only show the systray if enabled
if (m_systrayAction->isChecked())
m_systemTrayIcon->show();
} else {
m_systrayAction->setEnabled(false);
}
setWindowIcon(QIcon(":bigIcon.png"));
m_monitor->checkScheduler();
}
void
NIImporter_VISUM::parse_Edges() {
if (myLineParser.know("VSYSSET") && myLineParser.get("VSYSSET") == "") {
// no vehicle allowed; don't add
return;
}
// get the id
myCurrentID = NBHelpers::normalIDRepresentation(myLineParser.get("Nr"));
// get the from- & to-node and validate them
NBNode* from = getNamedNode("VonKnot", "VonKnotNr");
NBNode* to = getNamedNode("NachKnot", "NachKnotNr");
if (!checkNodes(from, to)) {
return;
}
// get the type
std::string type = myLineParser.know("Typ") ? myLineParser.get("Typ") : myLineParser.get("TypNr");
// get the speed
SUMOReal speed = myNetBuilder.getTypeCont().getSpeed(type);
if (!OptionsCont::getOptions().getBool("visum.use-type-speed")) {
try {
std::string speedS = myLineParser.know("v0-IV") ? myLineParser.get("v0-IV") : myLineParser.get("V0IV");
if (speedS.find("km/h") != std::string::npos) {
speedS = speedS.substr(0, speedS.find("km/h"));
}
speed = TplConvert::_2SUMORealSec(speedS.c_str(), -1);
speed = speed / (SUMOReal) 3.6;
} catch (OutOfBoundsException) {}
}
if (speed <= 0) {
speed = myNetBuilder.getTypeCont().getSpeed(type);
}
// get the information whether the edge is a one-way
bool oneway = myLineParser.know("Einbahn")
? TplConvert::_2bool(myLineParser.get("Einbahn").c_str())
: true;
// get the number of lanes
int nolanes = myNetBuilder.getTypeCont().getNumLanes(type);
if (!OptionsCont::getOptions().getBool("visum.recompute-lane-number")) {
try {
if (!OptionsCont::getOptions().getBool("visum.use-type-laneno")) {
nolanes = myLineParser.know("Fahrstreifen")
? TplConvert::_2intSec(myLineParser.get("Fahrstreifen").c_str(), 0)
: TplConvert::_2intSec(myLineParser.get("ANZFAHRSTREIFEN").c_str(), 0);
}
} catch (UnknownElement) {
}
} else {
SUMOReal cap = myLineParser.know("KAPIV")
? TplConvert::_2SUMORealSec(myLineParser.get("KAPIV").c_str(), -1)
: TplConvert::_2SUMORealSec(myLineParser.get("KAP-IV").c_str(), -1);
nolanes = myCapacity2Lanes.get(cap);
}
// check whether the id is already used
// (should be the opposite direction)
bool oneway_checked = oneway;
NBEdge* previous = myNetBuilder.getEdgeCont().retrieve(myCurrentID);
if (previous != 0) {
myCurrentID = '-' + myCurrentID;
previous->setLaneSpreadFunction(LANESPREAD_RIGHT);
oneway_checked = false;
}
if (find(myTouchedEdges.begin(), myTouchedEdges.end(), myCurrentID) != myTouchedEdges.end()) {
oneway_checked = false;
}
std::string tmpid = '-' + myCurrentID;
if (find(myTouchedEdges.begin(), myTouchedEdges.end(), tmpid) != myTouchedEdges.end()) {
previous = myNetBuilder.getEdgeCont().retrieve(tmpid);
if (previous != 0) {
previous->setLaneSpreadFunction(LANESPREAD_RIGHT);
}
oneway_checked = false;
}
// add the edge
int prio = myUseVisumPrio ? myNetBuilder.getTypeCont().getPriority(type) : -1;
if (nolanes != 0 && speed != 0) {
LaneSpreadFunction lsf = oneway_checked ? LANESPREAD_CENTER : LANESPREAD_RIGHT;
// @todo parse name from visum files
NBEdge* e = new NBEdge(myCurrentID, from, to, type, speed, nolanes, prio,
NBEdge::UNSPECIFIED_WIDTH, NBEdge::UNSPECIFIED_OFFSET, "", lsf);
if (!myNetBuilder.getEdgeCont().insert(e)) {
delete e;
WRITE_ERROR("Duplicate edge occured ('" + myCurrentID + "').");
}
}
myTouchedEdges.push_back(myCurrentID);
// nothing more to do, when the edge is a one-way street
if (oneway) {
return;
}
// add the opposite edge
myCurrentID = '-' + myCurrentID;
if (nolanes != 0 && speed != 0) {
LaneSpreadFunction lsf = oneway_checked ? LANESPREAD_CENTER : LANESPREAD_RIGHT;
// @todo parse name from visum files
NBEdge* e = new NBEdge(myCurrentID, from, to, type, speed, nolanes, prio,
NBEdge::UNSPECIFIED_WIDTH, NBEdge::UNSPECIFIED_OFFSET, "", lsf);
if (!myNetBuilder.getEdgeCont().insert(e)) {
delete e;
WRITE_ERROR("Duplicate edge occured ('" + myCurrentID + "').");
}
}
myTouchedEdges.push_back(myCurrentID);
}
double apply(const AzReadOnlyVector *v_data,
AzIntArr *ia_node=NULL) const {
checkNodes("apply");
return apply(v_data, this, ia_node);
}
int main( int argc, char** argv )
{
bpo::options_description cmdlineOptions;
bpo::positional_options_description pod;
bpo::variables_map vm;
std::string specPath;
common::level = common::eLogInfo;
// Supported options
cmdlineOptions.add_options()
( "help,h", "produce help message" )
( "spec,s", bpo::value< std::string >(), "specification file" )
( "verbose,v", bpo::value<int>()->default_value( 1 ), "verbose level (trace, debug, warning, error, fatal)" )
;
// Default option
pod.add( "input", -1 );
// Parsing options
try
{
bpo::store( bpo::command_line_parser( argc, argv ).options( cmdlineOptions ).positional( pod ).run(), vm);
// get environment options and parse them
if( const char* env_options = std::getenv("QC_OPTIONS") )
{
const std::vector< std::string > vecOptions = bpo::split_unix( env_options, " " );
bpo::store(bpo::command_line_parser( vecOptions ).options( cmdlineOptions ).positional( pod ).run(), vm);
}
bpo::notify( vm );
}
catch( const bpo::error& e)
{
LOG_ERROR( "command line error: " << e.what() );
exit( -2 );
}
catch(...)
{
LOG_ERROR( "unknown error in command line." );
exit( -2 );
}
switch( vm[ "verbose" ].as< int >() )
{
case 0 : common::level = common::eLogTrace; break;
case 1 : common::level = common::eLogInfo; break;
case 2 : common::level = common::eLogWarning; break;
case 3 : common::level = common::eLogError; break;
case 4 : common::level = common::eLogFatal; break;
default : common::level = common::eLogWarning; break;
}
if( vm.count( "spec" ) )
{
specPath = vm[ "spec" ].as< std::string >();
}
if( vm.count( "help" ) || specPath.empty() )
{
common::level = common::eLogInfo;
LOG_INFO( common::details::kColorBlue << "Spec Checker project" << common::details::kColorStd << std::endl );
LOG_INFO( common::details::kColorBlue << "NAME" << common::details::kColorStd );
LOG_INFO( common::details::kColorGreen << "\tSpecChecker" << common::details::kColorStd << std::endl );
LOG_INFO( common::details::kColorBlue << "SYNOPSIS" << common::details::kColorStd );
LOG_INFO( common::details::kColorGreen << "\tspecChecker [options] -s [file]" << common::details::kColorStd << std::endl );
LOG_INFO( common::details::kColorBlue << "DESCRIPTION" << common::details::kColorStd << std::endl );
LOG_INFO( "Spec Validation schema." << std::endl );
LOG_INFO( common::details::kColorBlue << "OPTIONS" << common::details::kColorStd << std::endl );
LOG_INFO( cmdlineOptions );
return 0;
}
try
{
spec_reader::SpecChecker specChecker( specPath );
if( ! specChecker.check() )
throw std::runtime_error( "Cannot open specification file: " + specPath );
spec_reader::Specification spec;
spec.setFromString( specChecker.getSpecString() );
LOG_INFO( common::details::kColorCyan << "Specification: " << spec.getId() << " (" << spec.getType() << ")" << common::details::kColorStd << std::endl );
checkNodes( spec.getFirstNode() );
}
catch( std::runtime_error e )
{
LOG_FATAL( "Runtime error: " << e.what() );
exit( -2 );
}
catch( std::exception e )
{
LOG_FATAL( "Error: " << e.what() );
exit( -2 );
}
return 0;
}