GradientChangeBoundary::GradientChangeBoundary(WaterPhysicsSystem* _system, RealVertex* _vertex, const Vec2f& _anchorPosition, Edge* _anchor, bool _leftEdge)
:Boundary(_system)
{
vertex = _vertex;
anchor = new Anchor(_anchorPosition, _anchor, this);
leftEdge = _leftEdge;
top = bottom = nullptr;
checkVolumes();
}
bool checkMesh3D ( RegionMesh& mesh,
Switch& sw,
bool fix = true,
bool verbose = false,
std::ostream& out = std::cerr,
std::ostream& err = std::cerr,
std::ostream& clog = std::clog )
{
verbose = verbose && ( mesh.comm()->MyPID() == 0 );
typedef typename RegionMesh::point_Type point_Type;
if ( mesh.storedPoints() == 0 )
{
err << "FATAL: mesh does not store points: I cannot do anything"
<< std::endl;
sw.create ( "ABORT_CONDITION", true );
sw.create ( "NOT_HAS_POINTS", true );
return false;
}
if (verbose)
{
out << " Check point marker ids" << std::endl;
}
if ( !MeshUtility::checkIsMarkerSet ( mesh.pointList ) )
{
if (verbose)
{
err << "WARNING: Not all points have marker id set" << std::endl;
}
sw.create ( "POINTS_MARKER_UNSET", true );
}
//-------------------------------------------------------------------------
// VOLUMES
//-------------------------------------------------------------------------
if ( mesh.storedVolumes() == 0 )
{
if (verbose) err << "FATAL: mesh does not store volumes: I cannot do anything"
<< std::endl;
sw.create ( "ABORT_CONDITION", true );
sw.create ( "NOT_HAS_VOLUMES", true );
return false;
}
if ( !MeshUtility::checkId ( mesh.volumeList ) )
{
if (verbose)
{
err << "ERROR: volume ids were wrongly set" << std::endl;
err << "FIXED" << std::endl;
}
if ( fix )
{
sw.create ( "FIXED_VOLUMES_ID", true );
}
if ( fix )
{
MeshUtility::fixId ( mesh.volumeList );
}
}
if (verbose)
{
out << " Check volum marker ids" << std::endl;
}
if ( !MeshUtility::checkIsMarkerSet ( mesh.volumeList ) )
{
if (verbose)
{
err << "WARNING: Not all volumes have marker flag set" << std::endl;
}
sw.create ( "VOLUMES_MARKER_UNSET", true );
if ( fix )
{
if (verbose)
{
out << "Fixing volume marker ids" << std::endl;
}
for ( typename RegionMesh::volumes_Type::iterator iv = mesh.volumeList.begin();
iv != mesh.volumeList.end(); ++iv )
{
if ( iv->isMarkerUnset() )
{
iv->setMarkerID ( mesh.markerID() );
}
}
}
}
if ( mesh.numElements() < mesh.storedVolumes() )
{
if (verbose)
err << "WARNING: Mesh Volumes must be at least "
<< mesh.storedVolumes() << std::endl;
if ( fix )
{
mesh.setNumVolumes ( mesh.storedVolumes() );
}
if ( fix )
{
sw.create ( "FIXED_VOLUME_COUNTER", true );
}
}
// test now orientation
boost::shared_ptr<std::vector<bool> > elSign ( new std::vector<bool> );
Real meshMeasure = checkVolumes ( mesh, *elSign, sw );
UInt positive;
if ( sw.test ( "SKIP_ORIENTATION_TEST" ) )
{
if (verbose)
{
clog << "W: ELEMENT ORIENTATION NOT IMPLEMENTED YET FOR THIS TYPE OF ELEMENTS, SKIP" << std::endl;
err << "W: ELEMENT ORIENTATION NOT IMPLEMENTED YET FOR THIS TYPE OF ELEMENTS, SKIP" << std::endl;
}
}
else if ( sw.test ( "HAS_NEGATIVE_VOLUMES" ) )
{
if (verbose)
{
out << "Checking volume orientation" << std::endl;
}
positive = count ( elSign->begin(), elSign->end(), true );
if ( verbose ) clog << positive << "W: positive elements out of"
<< mesh.storedVolumes() << std::endl;
if ( fix )
{
if ( verbose )
{
clog << "Fixing negative elements" << std::endl;
}
fixVolumes ( mesh, *elSign, sw );
}
if ( sw.test ( "ABORT_CONDITION" ) )
{
if (verbose) err << "ABORT: Cannot fix volumes, this element is not supported"
<< std::endl;
return false;
}
else
{
sw.unset ( "HAS_NEGATIVE_VOLUMES" );
meshMeasure = checkVolumes ( mesh, *elSign, sw );
if ( sw.test ( "HAS_NEGATIVE_VOLUMES" ) )
{
if ( fix )
{
if ( verbose )
{
err << "ABORT: Cannot fix volumes: something wrong with this mesh" << std::endl;
}
sw.create ( "ABORT_CONDITION", true );
}
return false;
}
}
}
if ( verbose ) clog << "Volume enclosed by the mesh= " << meshMeasure << std::endl
<< "(Computed by integrating mesh elements measures)" << std::endl
<< "(Using 1 point Quadrature rule)" << std::endl;
//-----------------------------------------------------
// BOUNDARY FACES
//-----------------------------------------------------
boost::shared_ptr<MeshUtility::temporaryFaceContainer_Type> bfaces (
new MeshUtility::temporaryFaceContainer_Type );
UInt numInternalFaces, numFaces;
if (verbose)
{
out << "Finding boundary faces from mesh topology" << std::endl;
}
UInt bFacesFound = MeshUtility::findBoundaryFaces ( mesh, *bfaces, numInternalFaces );
numFaces = bFacesFound + numInternalFaces;
MeshUtility::EnquireBFace<RegionMesh> enquireBFace (*bfaces );
UInt meshNumBoundaryFaces ( mesh.numBFaces() + mesh.faceList.countElementsWithFlag ( EntityFlags::SUBDOMAIN_INTERFACE, &Flag::testOneSet ) );
if ( mesh.storedFaces() == 0 ||
meshNumBoundaryFaces > mesh.storedFaces() ||
bFacesFound > mesh.storedFaces() || bFacesFound > meshNumBoundaryFaces )
{
// Something strange with boundary faces
if (verbose)
{
err << "ERROR: Not all boundary faces stored" << std::endl;
err << "Found " << bFacesFound << " stored " << mesh.storedFaces() <<
"B faces declared in mesh " << meshNumBoundaryFaces << std::endl;
}
if ( fix )
{
sw.create ( "BUILD_BFACES", true );
if (verbose)
{
out << "Building boundary faces from topology data" << std::endl;
}
MeshUtility::buildFaces ( mesh, clog, err, bFacesFound, numInternalFaces,
true, false, false, bfaces.get() );
}
if (verbose)
{
err << "After buildFaces" << std::endl;
err << "Found " << bFacesFound << " stored " << mesh.storedFaces()
<< "B faces declared in mesh " << meshNumBoundaryFaces << std::endl;
}
}
else
{
if ( mesh.storedFaces() == 0 )
{
if ( verbose )
{
err << "ABORT CONDITION: cannot find boundary faces" << std::endl;
}
sw.create ( "NOT_HAS_FACES", true );
sw.create ( "ABORT_CONDITION", true );
}
// The mesh declares to have the correct boundary faces. Yet, are we sure that the flag has been properly set
// and that they are stored first? If fix is set we don't trust anybody!
//
// Make sure that flags are set using the info in bfaces, which depends ONLY on the mesh topology. No messing bout with markers
// Make sure BFaces are stored first
if (fix)
{
if (verbose)
{
out << "Rearranging faces so that boundary faces are first" << std::endl;
}
MeshUtility::rearrangeFaces ( mesh, clog, err, sw, numFaces, bFacesFound,
verbose, bfaces.get() );
}
if ( meshNumBoundaryFaces != bFacesFound)
{
if ( verbose )
{
err << " ERROR: Number of B faces does not correspond to real one" << std::endl;
}
if (fix)
{
if ( verbose )
{
err << "FIXED Number of B faces has been fixed to:" << bFacesFound << std::endl;
}
mesh.setNumBFaces ( bFacesFound);
}
}
if ( !MeshUtility::checkId ( mesh.faceList ) )
{
if ( verbose )
{
err << "ERROR: face ids were wrongly set" << std::endl;
err << "FIXED" << std::endl;
}
if ( fix )
{
sw.create ( "FIXED_FACES_ID", true );
MeshUtility::fixId ( mesh.faceList );
}
}
// Check Consistency with the mesh.
if ( fix )
{
if (verbose)
{
out << "Make sure that adjacent elements of boundary faces are correct" << std::endl;
}
MeshUtility::fixBoundaryFaces ( mesh, clog, err, sw, numFaces, bFacesFound,
false, verbose, bfaces.get() );
}
if ( mesh.numBFaces() == 0 )
{
if ( verbose )
{
err << " MeshBFaces counter is unset" << std::endl;
}
if ( fix )
{
mesh.setNumBFaces ( mesh.storedFaces() );
sw.create ( "FIXED_BFACE_COUNTER", true );
mesh.setLinkSwitch ( "HAS_BOUNDARY_FACETS" );
}
}
if ( !MeshUtility::checkIsMarkerSet ( mesh.faceList ) )
{
if (verbose)
{
out << "Fix markers id for faces" << std::endl;
}
if ( verbose )
{
err << "WARNING: Not all faces have marker flag set" << std::endl;
}
sw.create ( "FACE_MARKER_UNSET", true );
if ( fix )
{
MeshUtility::setBoundaryFacesMarker ( mesh, clog, err, verbose );
}
if ( fix && MeshUtility::checkIsMarkerSet ( mesh.faceList ) )
{
sw.create ( "FACE_MARKER_UNSET", false );
sw.create ( "FACE_MARKER_FIXED", true );
}
}
}
if ( mesh.numFaces() != bFacesFound + numInternalFaces )
{
if ( verbose )
{
err << "WARNING Number of faces incorrectly set" << std::endl;
err << " It was " << mesh.numFaces() << std::endl;
err << " It should be " << bFacesFound + numInternalFaces
<< std::endl;
}
if ( fix )
{
if ( verbose )
{
err << " Fixing" << std::endl;
}
mesh.setNumFaces ( bFacesFound + numInternalFaces );
sw.create ( "FIXED_FACE_COUNTER", true );
}
}
if ( fix && mesh.storedFaces() == bFacesFound + numInternalFaces)
{
mesh.setLinkSwitch ( "HAS_ALL_FACETS" );
}
if (verbose)
{
out << std::endl;
out << " Boundary faces found :" << bFacesFound << std::endl;
out << " Num Faces Stored stored :" << mesh.storedFaces() << std::endl;
out << " Num faces in mesh :" << mesh.numFaces() << std::endl;
out << " Boundary faces counter gives:" << mesh.numBFaces() << std::endl;
out << std::endl;
}
//-----------------------------------------------------
// BOUNDARY EDGES
//-----------------------------------------------------
boost::shared_ptr<MeshUtility::temporaryEdgeContainer_Type> bedges (
new MeshUtility::temporaryEdgeContainer_Type );
UInt bEdgesFound = MeshUtility::findBoundaryEdges ( mesh, *bedges );
MeshUtility::EnquireBEdge<RegionMesh> enquireBEdge (*bedges );
UInt intedge (0);
UInt Ned (0);
MeshUtility::temporaryEdgeContainer_Type iedges;
if ( mesh.storedEdges() == 0 ||
mesh.numBEdges() > mesh.storedEdges() ||
bEdgesFound > mesh.storedEdges() )
{
if (verbose)
{
err << "WARNING: mesh does not store (all) boundary edges" << std::endl;
}
sw.create ( "NOT_HAS_EDGES", true );
if ( fix )
{
if (verbose)
{
out << "Build boundary edges" << std::endl;
}
MeshUtility::buildEdges ( mesh, clog, err, bEdgesFound, intedge, true, false,
false, bedges.get() );
}
Ned = bEdgesFound + intedge;
if ( fix )
{
sw.create ( "BUILD_BEDGES", true );
}
}
else
{
// Make sure BEdges are first
// Here I need to use a method that does not require the proper
// setting of boundary Points!
// With the edges I am being a bit sloppy. I am trusting the given mesh
// todo do the same it was done for faces!
if ( mesh.numBEdges() != bEdgesFound)
{
if ( verbose )
{
err << " ERROR: Number of BEdges does not correspond to real one" << std::endl;
}
if (fix)
{
if ( verbose )
{
err << "FIXED Number of BEdges has been fixed to:" << bEdgesFound << std::endl;
}
mesh.setNumBEdges ( bEdgesFound);
}
}
if ( fix )
{
if (verbose)
{
out << "Reorder edges so that boundary are first" << std::endl;
}
mesh.edgeList.reorderAccordingToFlag (EntityFlags::PHYSICAL_BOUNDARY, &Flag::testOneSet);
sw.create ( "FIXED_BEDGES_FIRST" );
}
if ( !MeshUtility::checkId ( mesh.edgeList ) )
{
if ( verbose )
{
err << "ERROR: edge ids were wrongly set" << std::endl;
}
if (fix)
{
if ( verbose )
{
err << "FIXED" << std::endl;
}
sw.create ( "FIXED_EDGES_ID", true );
MeshUtility::fixId ( mesh.edgeList );
}
}
if ( !MeshUtility::checkIsMarkerSet ( mesh.edgeList ) )
{
if ( verbose )
{
err << "WARNING: Not all edges have marker flag set" << std::endl;
}
sw.create ( "EDGE_MARKER_UNSET", true );
if ( fix )
{
if (verbose)
{
out << "Fix boundary edges marker" << std::endl;
}
MeshUtility::setBoundaryEdgesMarker ( mesh, clog, err, verbose );
}
if ( fix && MeshUtility::checkIsMarkerSet ( mesh.edgeList ) )
{
sw.unset ( "EDGE_MARKER_UNSET" );
sw.create ( "EDGE_MARKER_FIXED", true );
}
}
if (verbose)
{
out << "Computing number of internal edges";
}
if ( fix )
{
Ned = bEdgesFound + MeshUtility::findInternalEdges ( mesh, *bedges, iedges );
}
}
iedges.clear();
MeshUtility::temporaryEdgeContainer_Type tmp;
iedges.swap (tmp);
if ( mesh.numBEdges() != bEdgesFound )
{
if ( verbose ) err << "WARNING: number of found boundary edges:" << bEdgesFound
<< std::endl
<< " does not match that declared in mesh, i.e. "
<< mesh.numBEdges() << std::endl;
if ( mesh.numBEdges() == 0 )
{
if ( fix )
{
if ( verbose )
{
err << "FIXING" << std::endl;
}
sw.create ( "FIXED_BEDGES_COUNTER", true );
mesh.setNumBEdges ( bEdgesFound );
}
}
}
if ( Ned != mesh.numEdges() )
{
if ( fix )
{
if ( verbose ) err << "WARNING: Counter of number of edges badly set: Should be (actual number)" << Ned << std::endl
<< "It is instead equal to " << mesh.numEdges() << std::endl;
err << " **FIXED" << std::endl;
mesh.setNumEdges ( Ned );
}
}
UInt nbed;
UInt counte = MeshUtility::testDomainTopology ( mesh, nbed );
if ( counte == 0 )
{
if ( verbose )
{
out << "**DOMAIN SURFACE IS (TOPOLOGICALLY) CLOSED" << std::endl;
}
}
else
{
sw.create ( "DOMAIN_NOT_CLOSED", true );
if ( verbose ) err << "WARNING: DOMAIN APPEARS TO HAVE AN OPEN BOUNDARY (TOPOLOGY CHECK)" << std::endl
<< "Number of inconsistent edges:" << counte << std::endl;
}
//-----------------------------------------------------
// POINTS
//-----------------------------------------------------
if (verbose)
{
out << "Checking vertexes" << std::endl;
}
UInt numVerticesFound = mesh.pointList.countElementsWithFlag (EntityFlags::VERTEX, &Flag::testOneSet);
if (numVerticesFound != mesh.numVertices() )
{
if ( verbose )
{
err << "warning: The number of Points with vertex flag on does not coincide with the declared one." << std::endl;
}
if (fix)
{
if ( verbose )
{
err << "It will be fixed now" << std::endl;
}
// unset the flag. It will be remade
for (UInt i = 0; i < mesh.numPoints(); ++i)
{
mesh.point (i).unSetFlag (EntityFlags::VERTEX);
}
// Find the real vertices and set the flag
for (UInt i = 0; i < mesh.numElements(); ++i)
for (UInt j = 0; j < mesh.numLocalVertices(); ++j)
{
ID k = mesh.element (i).point (j).localId();
mesh.pointList (k).setFlag (EntityFlags::VERTEX);
}
numVerticesFound = mesh.pointList.countElementsWithFlag (
EntityFlags::VERTEX, &Flag::testOneSet);
mesh.setNumVertices (numVerticesFound);
UInt numBVerticesFound = mesh.pointList.countElementsWithFlag (
EntityFlags::VERTEX | EntityFlags::PHYSICAL_BOUNDARY, &Flag::testAllSet);
mesh.setNumBVertices (numBVerticesFound);
sw.create ( "FIXED_VERTICES_COUNTER", true );
}
}
// Now that boundary faces have been correctly set we may work out
// boundaty points
if (fix)
{
if (verbose)
{
out << "Fix boundary points using boundary faces info" << std::endl;
}
MeshUtility::fixBoundaryPoints (mesh, clog, err, verbose);
}
MeshUtility::EnquireBPoint<RegionMesh> enquirebpoint ( mesh );
UInt foundBPoints = mesh.pointList.countElementsWithFlag (EntityFlags::PHYSICAL_BOUNDARY,
&Flag::testOneSet);
if (verbose)
{
out << "B Points Found " << foundBPoints << std::endl;
}
if ( foundBPoints == 0 || foundBPoints < mesh.storedBPoints() )
{
if ( verbose )
{
err << "ERROR Bpoints indicator not correctly set" << std::endl;
}
}
else
{
if ( fix )
{
sw.create ( "FIXED_BOUNDARY_POINTS", true );
}
}
// Now that we are sure that (jus) boundary points are flagged as such we check if the marker id is set
if (verbose)
{
out << "Chsck point marker Ids" << std::endl;
}
if ( ! MeshUtility::checkIsMarkerSet ( mesh.pointList ) )
{
if (verbose)
{
err << "Points MARKER id incorrectly set" << std::endl;
}
if ( fix )
{
if ( verbose )
{
err << " Fixing Points Marker ID" << std::endl << "If unset the boundary will inherit the strongest among faces" << std::endl;
}
if ( verbose )
{
err << " The internal will be set to the domain flag" << std::endl;
}
MeshUtility::setBoundaryPointsMarker ( mesh, clog, err, false );
// fix marker at interior points. It takes
if ( ! MeshUtility::checkIsMarkerSet ( mesh.pointList ) )
{
// Maybe boundary points marker is fine, this is enough
bool boundaryIsOk (true);
std::vector<point_Type const*>
listOfPt = mesh.pointList.extractElementsWithFlag (
EntityFlags::PHYSICAL_BOUNDARY, &Flag::testOneSet);
for (typename std::vector<point_Type const*>::const_iterator
it = listOfPt.begin();
it < listOfPt.end();
++it)
{
boundaryIsOk = boundaryIsOk | (*it)->isMarkerSet();
}
std::vector<point_Type const*>().swap (listOfPt); // save memory
if ( verbose )
{
clog << " Marker ID on boundary points is fine. Internal points may have marker unset" << std::endl;
}
if (verbose)
{
err << "Cannot Fix Points MARKER" << std::endl;
}
if ( verbose && boundaryIsOk )
{
err << "But boundary points are fine" << std::endl;
}
sw.create ( "POINT_MARKER_UNSET", true );
}
else
{
if (verbose)
{
err << "FIXED" << std::endl;
}
sw.create ( "FIXED_POINT_MARKER", true );
}
}
}
if ( mesh.storedBPoints() == 0 )
{
if ( verbose )
{
err << "WARNING B. Points COUNTER incorrectly set" << std::endl;
}
if ( fix )
{
MeshUtility::setBoundaryPointsCounters ( mesh ) ;
if ( verbose )
{
err << " FIXED" << std::endl;
}
sw.create ( "FIXED_BPOINTS_COUNTER", true );
}
}
if ( mesh.numPoints() == 0 )
{
if ( verbose )
{
err << "WARNING Points Counter unset" << std::endl;
}
if ( fix )
{
mesh.numPoints() = mesh.storedPoints();
sw.create ( "FIXED_POINTS_COUNTER", true );
}
}
//-----------------------------------------------------
// FINAL CHECKS
//-----------------------------------------------------
if ( verbose ) out << " ******** COUNTERS CONTENT **********************************" << std::endl
<< " Num Volumes : " << mesh.numVolumes() << std::endl
<< " Num Vertices : " << mesh.numVertices() << std::endl
<< " Num B. Vertices: " << mesh.numBVertices() << std::endl
<< " Num Points : " << mesh.numPoints() << std::endl
<< " Num B. Points : " << mesh.numBPoints() << std::endl
<< " Num Edges : " << mesh.numEdges() << std::endl
<< " Num B. Edges : " << mesh.numBEdges() << std::endl
<< " Num Faces : " << mesh.numFaces() << std::endl
<< " Num B. Faces : " << mesh.numBFaces() << std::endl
<< " ******** END COUNTERS **********************************"
<< std::endl;
bool eulok1 = ( 2 * mesh.numFaces() -
mesh.numLocalFaces() * mesh.numVolumes() -
mesh.numBFaces() ) == 0;
bool eulok2 ( true );
if ( RegionMesh::elementShape_Type::S_shape == TETRA )
{
if ( verbose )
{
out << std::endl << "Checking Euler formulae: ";
}
eulok2 = ( mesh.numEdges() -
mesh.numVolumes() -
mesh.numVertices() -
( 3 * mesh.numBFaces() -
2 * mesh.numBVertices() ) / 4 ) == 0;
}
if ( ! ( eulok1 && eulok2 ) )
{
if ( verbose ) err << "WARNING: The following Euler formula(s) are not satisfied"
<< std::endl;
sw.create ( "NOT_EULER_OK" );
}
else
{
if ( verbose )
{
out << std::endl << " ok." << std::endl;
}
}
if ( !eulok1 )
{
if ( verbose ) err << " 2*nFaces = nFacesPerVolume*nVolumes + nBoundaryFaces"
<< std::endl
<< " 2*" << mesh.numFaces() << " != " << mesh.numLocalFaces()
<< " * " << mesh.numVolumes() << " + " << mesh.numBFaces()
<< std::endl;
}
if ( !eulok2 )
{
if ( verbose ) err << " nEdges = nVolumes + nVertices + (3*nBoundaryFaces - 2*nBoundaryVertices)/4" << std::endl
<< " " << mesh.numEdges() << " != " << mesh.numVolumes() << " + "
<< mesh.numVertices() << " + (3*" << mesh.numBFaces() << " - 2*"
<< mesh.numBVertices() << ")/4" << std::endl;
}
mesh.setLinkSwitch ( "HAS_BEEN_CHECKED" );
return true;
}
