/**
* tick_resume_onshot - resume oneshot mode
*/
void tick_resume_oneshot(void)
{
struct clock_event_device *dev = __this_cpu_read(tick_cpu_device.evtdev);
clockevents_set_state(dev, CLOCK_EVT_STATE_ONESHOT);
clockevents_program_event(dev, ktime_get(), true);
}
/*
* Event handler for periodic ticks
*/
void tick_handle_periodic(struct clock_event_device *dev)
{
int cpu = smp_processor_id();
ktime_t next;
tick_periodic(cpu);
if (dev->mode != CLOCK_EVT_MODE_ONESHOT)
return;
/*
* Setup the next period for devices, which do not have
* periodic mode:
*/
next = ktime_add(dev->next_event, tick_period);
for (;;) {
if (!clockevents_program_event(dev, next, ktime_get()))
return;
/*
* Have to be careful here. If we're in oneshot mode,
* before we call tick_periodic() in a loop, we need
* to be sure we're using a real hardware clocksource.
* Otherwise we could get trapped in an infinite
* loop, as the tick_periodic() increments jiffies,
* when then will increment time, posibly causing
* the loop to trigger again and again.
*/
if (timekeeping_valid_for_hres())
tick_periodic(cpu);
next = ktime_add(next, tick_period);
}
}
/*
* Event handler for periodic broadcast ticks
*/
static void tick_handle_periodic_broadcast(struct clock_event_device *dev)
{
ktime_t next;
tick_do_periodic_broadcast();
/*
* The device is in periodic mode. No reprogramming necessary:
*/
if (dev->mode == CLOCK_EVT_MODE_PERIODIC)
return;
/*
* Setup the next period for devices, which do not have
* periodic mode. We read dev->next_event first and add to it
* when the event already expired. clockevents_program_event()
* sets dev->next_event only when the event is really
* programmed to the device.
*/
for (next = dev->next_event; ;) {
next = ktime_add(next, tick_period);
if (!clockevents_program_event(dev, next, false))
return;
tick_do_periodic_broadcast();
}
}
/*
* Setup the device for a periodic tick
*/
void tick_setup_periodic(struct clock_event_device *dev, int broadcast)
{
tick_set_periodic_handler(dev, broadcast);
/* Broadcast setup ? */
if (!tick_device_is_functional(dev))
return;
if ((dev->features & CLOCK_EVT_FEAT_PERIODIC) &&
!tick_broadcast_oneshot_active()) {
clockevents_set_mode(dev, CLOCK_EVT_MODE_PERIODIC);
} else {
unsigned long seq;
ktime_t next;
do {
seq = read_seqbegin(&xtime_lock);
next = tick_next_period;
} while (read_seqretry(&xtime_lock, seq));
clockevents_set_mode(dev, CLOCK_EVT_MODE_ONESHOT);
for (;;) {
if (!clockevents_program_event(dev, next, ktime_get()))
return;
next = ktime_add(next, tick_period);
}
}
}
/**
* tick_setup_oneshot - setup the event device for oneshot mode (hres or nohz)
*/
void tick_setup_oneshot(struct clock_event_device *newdev,
void (*handler)(struct clock_event_device *),
ktime_t next_event)
{
newdev->event_handler = handler;
clockevents_set_state(newdev, CLOCK_EVT_STATE_ONESHOT);
clockevents_program_event(newdev, next_event, true);
}
/**
* tick_setup_oneshot - setup the event device for oneshot mode (hres or nohz)
*/
void tick_setup_oneshot(struct clock_event_device *newdev,
void (*handler)(struct clock_event_device *),
ktime_t next_event)
{
newdev->event_handler = handler;
clockevents_set_mode(newdev, CLOCK_EVT_MODE_ONESHOT);
clockevents_program_event(newdev, next_event, ktime_get());
}
static void tick_broadcast_set_event(struct clock_event_device *bc, int cpu,
ktime_t expires)
{
if (!clockevent_state_oneshot(bc))
clockevents_switch_state(bc, CLOCK_EVT_STATE_ONESHOT);
clockevents_program_event(bc, expires, 1);
tick_broadcast_set_affinity(bc, cpumask_of(cpu));
}
static int tick_broadcast_set_event(ktime_t expires, int force)
{
struct clock_event_device *bc = tick_broadcast_device.evtdev;
if (bc->mode != CLOCK_EVT_MODE_ONESHOT)
clockevents_set_mode(bc, CLOCK_EVT_MODE_ONESHOT);
return clockevents_program_event(bc, expires, force);
}
/**
* clockevents_update_freq - Update frequency and reprogram a clock event device.
* @dev: device to modify
* @freq: new device frequency
*
* Reconfigure and reprogram a clock event device in oneshot
* mode. Must be called on the cpu for which the device delivers per
* cpu timer events with interrupts disabled! Returns 0 on success,
* -ETIME when the event is in the past.
*/
int clockevents_update_freq(struct clock_event_device *dev, u32 freq)
{
clockevents_config(dev, freq);
if (dev->mode != CLOCK_EVT_MODE_ONESHOT)
return 0;
return clockevents_program_event(dev, dev->next_event, false);
}
static int tick_broadcast_set_event(struct clock_event_device *bc, int cpu,
ktime_t expires, int force)
{
int ret;
if (bc->state != CLOCK_EVT_STATE_ONESHOT)
clockevents_set_state(bc, CLOCK_EVT_STATE_ONESHOT);
ret = clockevents_program_event(bc, expires, force);
if (!ret)
tick_broadcast_set_affinity(bc, cpumask_of(cpu));
return ret;
}
/**
* tick_program_event internal worker function
*/
static int __tick_program_event(struct clock_event_device *dev,
ktime_t expires, int force)
{
ktime_t now = ktime_get();
while (1) {
int ret = clockevents_program_event(dev, expires, now);
if (!ret || !force)
return ret;
now = ktime_get();
expires = ktime_add(now, ktime_set(0, dev->min_delta_ns));
}
}
/**
* tick_program_event
*/
int tick_program_event(ktime_t expires, int force)
{
struct clock_event_device *dev = __get_cpu_var(tick_cpu_device).evtdev;
ktime_t now = ktime_get();
while (1) {
int ret = clockevents_program_event(dev, expires, now);
if (!ret || !force)
return ret;
now = ktime_get();
expires = ktime_add(now, ktime_set(0, dev->min_delta_ns));
}
}
static int tick_broadcast_set_event(ktime_t expires, int force)
{
struct clock_event_device *bc = tick_broadcast_device.evtdev;
ktime_t now = ktime_get();
int res;
for(;;) {
res = clockevents_program_event(bc, expires, now);
if (!res || !force)
return res;
now = ktime_get();
expires = ktime_add(now, ktime_set(0, bc->min_delta_ns));
}
}
static void tick_handle_periodic_broadcast(struct clock_event_device *dev)
{
ktime_t next;
tick_do_periodic_broadcast();
if (dev->mode == CLOCK_EVT_MODE_PERIODIC)
return;
for (next = dev->next_event; ;) {
next = ktime_add(next, tick_period);
if (!clockevents_program_event(dev, next, false))
return;
tick_do_periodic_broadcast();
}
}
/**
* tick_program_event internal worker function
*/
int tick_dev_program_event(struct clock_event_device *dev, ktime_t expires,
int force)
{
ktime_t now = ktime_get();
int i;
for (i = 0;;) {
int ret = clockevents_program_event(dev, expires, now);
if (!ret || !force)
return ret;
dev->retries++;
/*
* We tried 3 times to program the device with the given
* min_delta_ns. If that's not working then we increase it
* and emit a warning.
*/
if (++i > 2) {
/* Increase the min. delta and try again */
if (tick_increase_min_delta(dev)) {
/*
* Get out of the loop if min_delta_ns
* hit the limit already. That's
* better than staying here forever.
*
* We clear next_event so we have a
* chance that the box survives.
*/
printk(KERN_WARNING
"CE: Reprogramming failure. Giving up\n");
dev->next_event.tv64 = KTIME_MAX;
return -ETIME;
}
i = 0;
}
now = ktime_get();
expires = ktime_add_ns(now, dev->min_delta_ns);
}
}
/*
* Event handler for periodic ticks
*/
void tick_handle_periodic(struct clock_event_device *dev)
{
int cpu = smp_processor_id();
ktime_t next = dev->next_event;
tick_periodic(cpu);
#if defined(CONFIG_HIGH_RES_TIMERS) || defined(CONFIG_NO_HZ_COMMON)
/*
* The cpu might have transitioned to HIGHRES or NOHZ mode via
* update_process_times() -> run_local_timers() ->
* hrtimer_run_queues().
*/
if (dev->event_handler != tick_handle_periodic)
return;
#endif
if (!clockevent_state_oneshot(dev))
return;
for (;;) {
/*
* Setup the next period for devices, which do not have
* periodic mode:
*/
next = ktime_add(next, tick_period);
if (!clockevents_program_event(dev, next, false))
return;
/*
* Have to be careful here. If we're in oneshot mode,
* before we call tick_periodic() in a loop, we need
* to be sure we're using a real hardware clocksource.
* Otherwise we could get trapped in an infinite
* loop, as the tick_periodic() increments jiffies,
* which then will increment time, possibly causing
* the loop to trigger again and again.
*/
if (timekeeping_valid_for_hres())
tick_periodic(cpu);
}
}
/*
* Event handler for periodic ticks
*/
void tick_handle_periodic(struct clock_event_device *dev)
{
int cpu = smp_processor_id();
ktime_t next;
tick_periodic(cpu);
if (dev->mode != CLOCK_EVT_MODE_ONESHOT)
return;
/*
* Setup the next period for devices, which do not have
* periodic mode:
*/
next = ktime_add(dev->next_event, tick_period);
for (;;) {
if (!clockevents_program_event(dev, next, ktime_get()))
return;
tick_periodic(cpu);
next = ktime_add(next, tick_period);
}
}
/*
* Event handler for periodic broadcast ticks
*/
static void tick_handle_periodic_broadcast(struct clock_event_device *dev)
{
dev->next_event.tv64 = KTIME_MAX;
tick_do_periodic_broadcast();
/*
* The device is in periodic mode. No reprogramming necessary:
*/
if (dev->mode == CLOCK_EVT_MODE_PERIODIC)
return;
/*
* Setup the next period for devices, which do not have
* periodic mode:
*/
for (;;) {
ktime_t next = ktime_add(dev->next_event, tick_period);
if (!clockevents_program_event(dev, next, ktime_get()))
return;
tick_do_periodic_broadcast();
}
}
static int tick_broadcast_set_event(ktime_t expires, int force)
{
struct clock_event_device *bc = tick_broadcast_device.evtdev;
return clockevents_program_event(bc, expires, force);
}
static int omap3_enter_idle(struct cpuidle_device *dev,
struct cpuidle_state *state)
{
struct omap3_processor_cx *cx;
u8 cur_per_state, cur_neon_state, pre_neon_state, pre_per_state;
struct timespec ts_preidle, ts_postidle, ts_idle;
u32 fclken_core, iclken_core, fclken_per, iclken_per;
u32 sdrcpwr_val, sdrc_power_register = 0x0;
int wakeup_latency;
int core_sleep_flg = 0;
u32 per_ctx_saved = 0;
int ret = -1;
#ifdef CONFIG_ENABLE_SWLATENCY_MEASURE
int idle_status = 0;
#endif
local_irq_disable();
local_fiq_disable();
if (need_resched()) {
local_irq_enable();
local_fiq_enable();
return 0;
}
#ifdef CONFIG_ENABLE_SWLATENCY_MEASURE
sw_latency_arr[swlat_arr_wrptr].sleep_start =
omap_32k_sync_timer_read();
#endif
PM_PREPWSTST_MPU = 0xFF;
PM_PREPWSTST_CORE = 0xFF;
PM_PREPWSTST_NEON = 0xFF;
PM_PREPWSTST_PER = 0xFF;
cx = cpuidle_get_statedata(state);
target_state.mpu_state = cx->mpu_state;
target_state.core_state = cx->core_state;
/* take a time marker for residency */
getnstimeofday(&ts_preidle);
if (cx->type == OMAP3_STATE_C0) {
omap_sram_idle();
goto return_sleep_time;
}
if (cx->type > OMAP3_STATE_C1)
sched_clock_idle_sleep_event(); /* about to enter deep idle */
correct_target_state();
wakeup_latency = cx->wakeup_latency;
if (target_state.core_state != cx->core_state) {
/* Currently, this can happen only for core_off */
/* Adjust wakeup latency to that of core_cswr state */
/* Hard coded now and needs to be made more generic */
/* omap3_power_states[4] is CSWR for core */
wakeup_latency = omap3_power_states[4].wakeup_latency;
}
/* Reprogram next wake up tick to adjust for wake latency */
if (wakeup_latency > 1000) {
struct tick_device *d = tick_get_device(smp_processor_id());
ktime_t adjust, next, now = ktime_get();
if (ktime_to_ns(ktime_sub(d->evtdev->next_event, now)) >
(wakeup_latency * 1000 + NSEC_PER_MSEC)) {
adjust = ktime_set(0, (wakeup_latency * 1000));
next = ktime_sub(d->evtdev->next_event, adjust);
clockevents_program_event(d->evtdev, next, now);
}
}
/* Check for pending interrupts. If there is an interrupt, return */
if (INTCPS_PENDING_IRQ0 | INTCPS_PENDING_IRQ1 | INTCPS_PENDING_IRQ2)
goto return_sleep_time;
prcm_get_power_domain_state(DOM_PER, &cur_per_state);
prcm_get_power_domain_state(DOM_NEON, &cur_neon_state);
fclken_core = CM_FCLKEN1_CORE;
iclken_core = CM_ICLKEN1_CORE;
fclken_per = CM_FCLKEN_PER;
iclken_per = CM_ICLKEN_PER;
/* If target state if core_off, save registers
* before changing anything
*/
if (target_state.core_state >= PRCM_CORE_OSWR_MEMRET) {
prcm_save_registers(&target_state);
omap_uart_save_ctx(0);
omap_uart_save_ctx(1);
}
/* Check for pending interrupts. If there is an interrupt, return */
if (INTCPS_PENDING_IRQ0 | INTCPS_PENDING_IRQ1 | INTCPS_PENDING_IRQ2)
goto return_sleep_time;
/* Program MPU and NEON to target state */
if (target_state.mpu_state > PRCM_MPU_ACTIVE) {
if ((cur_neon_state == PRCM_ON) &&
(target_state.neon_state != PRCM_ON)) {
if (target_state.neon_state == PRCM_OFF)
omap3_save_neon_context();
#ifdef CONFIG_HW_SUP_TRANS
/* Facilitating SWSUP RET, from HWSUP mode */
prcm_set_clock_domain_state(DOM_NEON,
PRCM_NO_AUTO, PRCM_FALSE);
prcm_set_power_domain_state(DOM_NEON, PRCM_ON,
PRCM_FORCE);
#endif
prcm_force_power_domain_state(DOM_NEON,
target_state.neon_state);
}
#ifdef CONFIG_MPU_OFF
/* Populate scrathpad restore address */
*(scratchpad_restore_addr) = restore_pointer_address;
#endif
if (target_state.core_state > PRCM_CORE_CSWR_MEMRET) {
ret = omap3_save_secure_ram_context(
target_state.core_state);
if (ret)
printk(KERN_ERR "omap3_save_secure_ram_context"
"failed in idle %x\n", ret);
if (core_off_notification != NULL)
core_off_notification(PRCM_TRUE);
}
prcm_set_mpu_domain_state(target_state.mpu_state);
}
/* Check for pending interrupts. If there is an interrupt, return */
if (INTCPS_PENDING_IRQ0 | INTCPS_PENDING_IRQ1 | INTCPS_PENDING_IRQ2)
goto restore;
/* Program CORE and PER to target state */
if (target_state.core_state > PRCM_CORE_ACTIVE) {
/* Log core sleep attmept */
core_sleep_flg = 1;
#ifdef CONFIG_OMAP_SMARTREFLEX
disable_smartreflex(SR1_ID);
disable_smartreflex(SR2_ID);
#endif
/* Workaround for Silicon Errata 1.64 */
if (is_sil_rev_equal_to(OMAP3430_REV_ES1_0)) {
if (CM_CLKOUT_CTRL & 0x80)
CM_CLKOUT_CTRL &= ~(0x80);
}
prcm_set_core_domain_state(target_state.core_state);
/* Enable Autoidle for GPT1 explicitly - Errata 1.4 */
CM_AUTOIDLE_WKUP |= 0x1;
/* Disable UART-1,2 */
CM_FCLKEN1_CORE &= ~0x6000;
/* Disable HSUSB OTG ICLK explicitly*/
CM_ICLKEN1_CORE &= ~0x10;
/* Enabling IO_PAD capabilities */
PM_WKEN_WKUP |= 0x100;
if (cur_per_state == PRCM_ON && cx->type >= OMAP3_STATE_C3 &&
!(CM_FCLKEN_PER & PER_FCLK_MASK)) {
/* In ES3.1, Enable IO Daisy chain */
if (is_sil_rev_greater_than(OMAP3430_REV_ES3_0)) {
PM_WKEN_WKUP |= 0x10000;
/* Wait for daisy chain to be ready */
while ((PM_WKST_WKUP & 0x10000) == 0x0)
;
/* clear the status */
PM_WKST_WKUP &= ~0x10000;
}
omap3_save_per_context();
prcm_set_power_domain_state(DOM_PER, PRCM_OFF,
PRCM_AUTO);
per_ctx_saved = 1;
CM_FCLKEN_PER = 0;
CM_ICLKEN_PER = 0;
}
}
/* Check for pending interrupts. If there is an interrupt, return */
if (INTCPS_PENDING_IRQ0 | INTCPS_PENDING_IRQ1 | INTCPS_PENDING_IRQ2)
goto restore;
if (target_state.core_state == PRCM_CORE_OFF) {
if (!is_device_type_gp() &&
is_sil_rev_greater_than(OMAP3430_REV_ES2_1)) {
/* es3 series bug */
sdrc_power_register = sdrc_read_reg(SDRC_POWER);
sdrcpwr_val = sdrc_power_register &
~(SDRC_PWR_AUTOCOUNT_MASK |
SDRC_PWR_CLKCTRL_MASK);
lock_scratchpad_sem();
sdrcpwr_val |= 0x120;
save_to_scratchpad(SCRATHPAD_SDRCPWR_OFFSET,
sdrcpwr_val);
unlock_scratchpad_sem();
}
}
#ifdef CONFIG_ENABLE_SWLATENCY_MEASURE
sw_latency_arr[swlat_arr_wrptr].sleep_end = omap_32k_sync_timer_read();
idle_status++;
#endif
omap_sram_idle();
if (target_state.core_state == PRCM_CORE_OFF) {
if (!is_device_type_gp() &&
is_sil_rev_greater_than(OMAP3430_REV_ES2_1))
sdrc_write_reg(sdrc_power_register, SDRC_POWER);
}
restore:
/* In case of ES3.1, disable IO daisy chain */
if (is_sil_rev_greater_than(OMAP3430_REV_ES3_0) && per_ctx_saved)
PM_WKEN_WKUP &= ~(0x10000);
/* Disabling IO_PAD capabilities */
if (core_sleep_flg)
PM_WKEN_WKUP &= ~(0x100);
/* Disabling IO_PAD capabilities */
PM_WKEN_WKUP &= ~(0x100);
#ifdef OMAP3_START_RNG
/*Capture the PM_PREPWSTST_CORE to be used later
* for starting the RNG (Random Number Generator)*/
prepwst_core_rng = PM_PREPWSTST_CORE;
#endif
CM_FCLKEN1_CORE = fclken_core;
CM_ICLKEN1_CORE = iclken_core;
if (target_state.mpu_state > PRCM_MPU_ACTIVE) {
#ifdef CONFIG_MPU_OFF
/* On ES 2.0, if scrathpad is populated with valid
* pointer, warm reset does not work
* So populate scrathpad restore address only in
* cpuidle and suspend calls
*/
*(scratchpad_restore_addr) = 0x0;
#endif
prcm_set_mpu_domain_state(PRCM_MPU_ACTIVE);
if ((cur_neon_state == PRCM_ON) &&
(target_state.mpu_state > PRCM_MPU_INACTIVE)) {
prcm_force_power_domain_state(DOM_NEON, cur_neon_state);
prcm_get_pre_power_domain_state(DOM_NEON,
&pre_neon_state);
if (pre_neon_state == PRCM_OFF)
omap3_restore_neon_context();
#ifdef CONFIG_HW_SUP_TRANS
prcm_set_power_domain_state(DOM_NEON, PRCM_ON,
PRCM_AUTO);
#endif
}
}
/* Continue core restoration part, only if Core-Sleep is attempted */
if ((target_state.core_state > PRCM_CORE_ACTIVE) && core_sleep_flg) {
prcm_set_core_domain_state(PRCM_CORE_ACTIVE);
#ifdef CONFIG_OMAP_SMARTREFLEX
enable_smartreflex(SR1_ID);
enable_smartreflex(SR2_ID);
#endif
if (target_state.core_state >= PRCM_CORE_OSWR_MEMRET) {
#ifdef CONFIG_OMAP34XX_OFFMODE
context_restore_update(DOM_CORE1);
#endif
prcm_restore_registers(&target_state);
prcm_restore_core_context(target_state.core_state);
omap3_restore_core_settings();
}
/* Errata 1.4
* if the timer device gets idled which is when we
* are cutting the timer ICLK which is when we try
* to put Core to RET.
* Wait Period = 2 timer interface clock cycles +
* 1 timer functional clock cycle
* Interface clock = L4 clock. For the computation L4
* clock is assumed at 50MHz (worst case).
* Functional clock = 32KHz
* Wait Period = 2*10^-6/50 + 1/32768 = 0.000030557 = 30.557uSec
* Roundingoff the delay value to a safer 50uSec
*/
omap_udelay(GPTIMER_WAIT_DELAY);
CM_AUTOIDLE_WKUP &= ~(0x1);
if (core_off_notification != NULL)
core_off_notification(PRCM_FALSE);
}
if (cur_per_state == PRCM_ON) {
CM_FCLKEN_PER = fclken_per;
CM_ICLKEN_PER = iclken_per;
prcm_get_pre_power_domain_state(DOM_PER, &pre_per_state);
if (pre_per_state == PRCM_OFF && per_ctx_saved) {
if (enable_debug)
per_off++;
omap3_restore_per_context();
post_uart_inactivity();
#ifdef CONFIG_OMAP34XX_OFFMODE
context_restore_update(DOM_PER);
#endif
}
}
pr_debug("MPU state:%x,CORE state:%x\n", PM_PREPWSTST_MPU,
PM_PREPWSTST_CORE);
store_prepwst();
return_sleep_time:
getnstimeofday(&ts_postidle);
ts_idle = timespec_sub(ts_postidle, ts_preidle);
if (cx->type > OMAP3_STATE_C1)
sched_clock_idle_wakeup_event(timespec_to_ns(&ts_idle));
#ifdef CONFIG_ENABLE_SWLATENCY_MEASURE
if (idle_status) {
sw_latency_arr[swlat_arr_wrptr].wkup_end =
omap_32k_sync_timer_read();
sw_latency_arr[swlat_arr_wrptr].wkup_start =
wakeup_start_32ksync;
sw_latency_arr[swlat_arr_wrptr].cstate =
((PM_PREPWSTST_MPU & 0x3) << 2) |
(PM_PREPWSTST_CORE & 0x3) |
(omap_readl(0x48306CB0) << 16);
swlat_arr_wrptr++;
if (swlat_arr_wrptr == SW_LATENCY_ARR_SIZE)
swlat_arr_wrptr = 0;
}
#endif
local_irq_enable();
local_fiq_enable();
#ifdef OMAP3_START_RNG
if (!is_device_type_gp()) {
/*Start RNG after interrupts are enabled
* and only when CORE OFF was successful
*/
if (!(prepwst_core_rng & 0x3)) {
ret = omap3_start_rng();
if (ret)
printk(KERN_INFO"Failed to generate new"
" RN in idle %x\n", ret);
prepwst_core_rng = 0xFF;
}
}
#endif
return (u32)timespec_to_ns(&ts_idle)/1000;
}
static int omap3_enter_idle(struct cpuidle_device *dev,
struct cpuidle_state *state)
{
struct omap3_processor_cx *cx;
struct timespec ts_preidle;
struct timespec ts_postidle;
struct timespec ts_idle;
/* Used for LPR mode DSS context save/restore. */
u32 pm_wken_dss = 0;
u32 pm_pwstctrl_dss = 0;
u32 cm_clkstctrl_dss = 0;
u32 cm_fclken_dss = 0;
u32 cm_iclken_dss = 0;
u32 cm_autoidle_dss = 0;
u32 fclken_core;
u32 iclken_core;
u32 fclken_per;
u32 iclken_per;
int wakeup_latency;
struct system_power_state target_state;
struct system_power_state cur_state;
#ifdef CONFIG_HW_SUP_TRANS
u32 sleepdep_per;
u32 wakedep_per;
#endif /* #ifdef CONFIG_HW_SUP_TRANS */
u32 sdrc_power_register = 0;
int core_sleep_flg = 0;
int got_console_lock = 0;
/* Disable interrupts.
*/
local_irq_disable();
local_fiq_disable();
/* If need resched - return immediately
*/
if( need_resched()) {
local_fiq_enable();
local_irq_enable();
return 0;
}
/* Reset previous power state registers.
*/
clear_prepwstst();
omap3_idle_setup_wkup_sources ();
/* Set up target state from state context provided by cpuidle.
*/
cx = cpuidle_get_statedata(state);
target_state.mpu_state = cx->mpu_state;
target_state.core_state = cx->core_state;
target_state.neon_state = 0; /* Avoid gcc warning. Will be set in
adjust_target_states(). */
/* take a time marker for residency.
*/
getnstimeofday(&ts_preidle);
/* If the requested state is C0, we bail here...
*/
if (cx->type == OMAP3_STATE_C1) {
omap_sram_idle(target_state.mpu_state);
goto return_sleep_time;
}
if (cx->type > OMAP3_STATE_C2)
sched_clock_idle_sleep_event(); /* about to enter deep idle */
/* Adjust PER and NEON domain target states as well as CORE domain
* target state depending on MPU/CORE setting, enable_off sysfs entry
* and PER timer status.
*/
adjust_target_states(&target_state);
wakeup_latency = cx->wakeup_latency;
/* NOTE:
* We will never get the condition below as we are not supporting
* CORE OFF right now. Keeping this code around for future reference.
*/
if (target_state.core_state != cx->core_state) {
/* Currently, this can happen only for core_off. Adjust wakeup
* latency to that of core_cswr state. Hard coded now and needs
* to be made more generic omap3_power_states[4] is CSWR for
* core */
wakeup_latency = omap3_power_states[4].wakeup_latency;
}
/* Reprogram next wake up tick to adjust for wake latency */
if (wakeup_latency > 1000) {
struct tick_device *d = tick_get_device(smp_processor_id());
ktime_t now = ktime_get();
if (ktime_to_ns(ktime_sub(d->evtdev->next_event, now)) >
(wakeup_latency * 1000 + NSEC_PER_MSEC)) {
ktime_t adjust = ktime_set(0, (wakeup_latency * 1000));
ktime_t next = ktime_sub(d->evtdev->next_event, adjust);
clockevents_program_event(d->evtdev, next, now);
}
}
/* Check for pending interrupts. If there is an interrupt, return */
if (INTCPS_PENDING_IRQ0 | INTCPS_PENDING_IRQ1 | INTCPS_PENDING_IRQ2)
goto return_sleep_time;
/* Remember the current power states and clock settings.
*/
prcm_get_power_domain_state(DOM_PER, &cur_state.per_state);
prcm_get_power_domain_state(DOM_CAM, &cur_state.cam_state);
prcm_get_power_domain_state(DOM_SGX, &cur_state.sgx_state);
prcm_get_power_domain_state(DOM_NEON, &cur_state.neon_state);
fclken_core = CM_FCLKEN1_CORE;
iclken_core = CM_ICLKEN1_CORE;
fclken_per = CM_FCLKEN_PER;
iclken_per = CM_ICLKEN_PER;
#ifdef CONFIG_HW_SUP_TRANS
/* Facilitating SWSUP RET, from HWSUP mode */
sleepdep_per = CM_SLEEPDEP_PER;
wakedep_per = PM_WKDEP_PER;
#endif /* #ifdef CONFIG_HW_SUP_TRANS */
/* If target state if core_off, save registers before changing
* anything.
*/
if (target_state.core_state >= PRCM_CORE_OSWR_MEMRET) {
prcm_save_registers();
}
/* Check for pending interrupts. If there is an interrupt, return */
if (INTCPS_PENDING_IRQ0 | INTCPS_PENDING_IRQ1 | INTCPS_PENDING_IRQ2)
goto return_sleep_time;
/* Program MPU and NEON to target state */
if (target_state.mpu_state > PRCM_MPU_ACTIVE) {
if ((cur_state.neon_state == PRCM_ON) &&
(target_state.neon_state != PRCM_ON)) {
if (target_state.neon_state == PRCM_OFF)
omap3_save_neon_context();
prcm_transition_domain_to(DOM_NEON, target_state.neon_state);
}
#ifdef _disabled_CONFIG_MPU_OFF
/* Populate scratchpad restore address */
scratchpad_set_restore_addr();
#endif
/* TODO No support for OFF Mode yet
if(target_state.core_state > PRCM_CORE_CSWR_MEMRET)
omap3_save_secure_ram_context(target_state.core_state);
*/
prcm_set_mpu_domain_state(target_state.mpu_state);
}
/* Check for pending interrupts. If there is an interrupt, return */
if (INTCPS_PENDING_IRQ0 | INTCPS_PENDING_IRQ1 | INTCPS_PENDING_IRQ2)
goto restore;
/* Program CORE and PER to target state */
if (target_state.core_state > PRCM_CORE_ACTIVE) {
/* Log core sleep attempt */
core_sleep_flg = 1;
/* Lock the console to prevent potential access to UARTs.
*/
if (0 == try_acquire_console_sem()) {
got_console_lock = 1;
}
/* Handle PER, CAM and SGX domains. */
if ((cur_state.per_state == PRCM_ON) &&
(target_state.per_state != PRCM_ON)) {
if (target_state.per_state == PRCM_OFF) {
omap3_save_per_context();
}
prcm_transition_domain_to(DOM_PER, target_state.per_state);
}
if (PRCM_ON == cur_state.cam_state)
prcm_transition_domain_to(DOM_CAM, PRCM_RET);
if (PRCM_ON == cur_state.sgx_state)
prcm_transition_domain_to(DOM_SGX, PRCM_RET);
disable_smartreflex(SR1_ID);
disable_smartreflex(SR2_ID);
prcm_set_core_domain_state(target_state.core_state);
/* Enable Autoidle for GPT1 explicitly - Errata 1.4 */
CM_AUTOIDLE_WKUP |= 0x1;
/* Disable HSUSB OTG ICLK explicitly*/
CM_ICLKEN1_CORE &= ~0x10;
/* Enabling GPT1 wake-up capabilities */
PM_WKEN_WKUP |= 0x1;
/* Errata 2.15
* Configure UARTs to ForceIdle. Otherwise they can prevent
* CORE RET.
*/
omap24xx_uart_set_force_idle();
CM_ICLKEN1_CORE &= ~(1<<7); /* MAILBOXES */
CM_ICLKEN1_CORE &= ~(1<<6); /* OMAPCTRL */
/* If we are in LPR mode we need to set up DSS accordingly.
*/
if (omap2_disp_lpr_is_enabled()) {
pm_wken_dss = PM_WKEN_DSS;
pm_pwstctrl_dss = PM_PWSTCTRL_DSS;
cm_clkstctrl_dss = CM_CLKSTCTRL_DSS;
cm_fclken_dss = CM_FCLKEN_DSS;
cm_iclken_dss = CM_ICLKEN_DSS;
cm_autoidle_dss = CM_AUTOIDLE_DSS;
PM_WKEN_DSS = 0x00000001;
PM_PWSTCTRL_DSS = 0x00030107;
CM_CLKSTCTRL_DSS = 0x00000003;
CM_FCLKEN_DSS = 0x00000001;
CM_ICLKEN_DSS = 0x00000001;
CM_AUTOIDLE_DSS = 0x00000001;
}
}
/* Check for pending interrupts. If there is an interrupt, return */
if (INTCPS_PENDING_IRQ0 | INTCPS_PENDING_IRQ1 | INTCPS_PENDING_IRQ2)
goto restore;
#ifdef CONFIG_DISABLE_HFCLK
PRM_CLKSRC_CTRL |= 0x18; /* set sysclk to stop */
#endif /* #ifdef CONFIG_DISABLE_HFCLK */
DEBUG_STATE_CAPTURE();
/* Errata 1.142:
* SDRC not sending auto-refresh when OMAP wakes-up from OFF mode
*/
if (!is_device_type_gp() && is_sil_rev_equal_to(OMAP3430_REV_ES3_0)) {
sdrc_power_register = SDRC_POWER_REG;
SDRC_POWER_REG &= ~(SDRC_PWR_AUTOCOUNT_MASK | SDRC_PWR_CLKCTRL_MASK);
SDRC_POWER_REG |= 0x120;
if (target_state.core_state == PRCM_CORE_OFF)
save_scratchpad_contents();
}
omap_sram_idle(target_state.mpu_state);
/* Errata 1.142:
* SDRC not sending auto-refresh when OMAP wakes-up from OFF mode
*/
if (!is_device_type_gp() && is_sil_rev_equal_to(OMAP3430_REV_ES3_0))
SDRC_POWER_REG = sdrc_power_register;
restore:
#ifdef CONFIG_DISABLE_HFCLK
PRM_CLKSRC_CTRL &= ~0x18;
#endif /* #ifdef CONFIG_DISABLE_HFCLK */
/* Disabling IO_PAD capabilities */
PM_WKEN_WKUP &= ~(0x100);
CM_FCLKEN1_CORE = fclken_core;
CM_ICLKEN1_CORE = iclken_core;
if (target_state.mpu_state > PRCM_MPU_ACTIVE) {
#ifdef _disabled_CONFIG_MPU_OFF
/* On ES 2.0, if scratchpad is populated with valid pointer,
* warm reset does not work So populate scratchpad restore
* address only in cpuidle and suspend calls
*/
scratchpad_clr_restore_addr();
#endif
prcm_set_mpu_domain_state(PRCM_MPU_ACTIVE);
if ((cur_state.neon_state == PRCM_ON) &&
(target_state.mpu_state > PRCM_MPU_INACTIVE)) {
u8 pre_state;
prcm_force_power_domain_state(DOM_NEON, cur_state.neon_state);
prcm_get_pre_power_domain_state(DOM_NEON, &pre_state);
if (pre_state == PRCM_OFF) {
omap3_restore_neon_context();
}
#ifdef CONFIG_HW_SUP_TRANS
prcm_set_power_domain_state(DOM_NEON, POWER_DOMAIN_ON,
PRCM_AUTO);
#endif
}
}
/* Continue core restoration part, only if Core-Sleep is attempted */
if ((target_state.core_state > PRCM_CORE_ACTIVE) && core_sleep_flg) {
u8 pre_per_state;
prcm_set_core_domain_state(PRCM_CORE_ACTIVE);
omap24xx_uart_clr_force_idle();
enable_smartreflex(SR1_ID);
enable_smartreflex(SR2_ID);
/* Turn PER back ON if it was ON before idle.
*/
if (cur_state.per_state == PRCM_ON) {
prcm_force_power_domain_state(DOM_PER, cur_state.per_state);
CM_ICLKEN_PER = iclken_per;
CM_FCLKEN_PER = fclken_per;
prcm_get_pre_power_domain_state(DOM_PER, &pre_per_state);
if (pre_per_state == PRCM_OFF) {
omap3_restore_per_context();
#ifdef CONFIG_OMAP34XX_OFFMODE
context_restore_update(DOM_PER);
#endif
}
#ifdef CONFIG_HW_SUP_TRANS
/* Facilitating SWSUP RET, from HWSUP mode */
CM_SLEEPDEP_PER = sleepdep_per;
PM_WKDEP_PER = wakedep_per;
prcm_set_power_domain_state(DOM_PER, PRCM_ON, PRCM_AUTO);
#endif
}
/* Restore CAM and SGX. */
if (PRCM_ON == cur_state.cam_state)
prcm_transition_domain_to(DOM_CAM, PRCM_ON);
if (PRCM_ON == cur_state.sgx_state)
prcm_transition_domain_to(DOM_SGX, PRCM_ON);
/* If we lost CORE context, restore it.
*/
if (target_state.core_state >= PRCM_CORE_OSWR_MEMRET) {
#ifdef CONFIG_OMAP34XX_OFFMODE
context_restore_update(DOM_CORE1);
#endif
prcm_restore_registers();
prcm_restore_core_context(target_state.core_state);
#ifdef CONFIG_CORE_OFF
omap3_restore_core_settings();
#endif
}
/* Restore DSS settings */
if (omap2_disp_lpr_is_enabled()) {
PM_WKEN_DSS = pm_wken_dss;
PM_PWSTCTRL_DSS = pm_pwstctrl_dss;
CM_CLKSTCTRL_DSS = cm_clkstctrl_dss;
CM_FCLKEN_DSS = cm_fclken_dss;
CM_ICLKEN_DSS = cm_iclken_dss;
CM_AUTOIDLE_DSS = cm_autoidle_dss;
}
/* At this point CORE and PER domain are back. We can release
* the console if we have it.
*/
if (got_console_lock) {
release_console_sem();
}
#ifdef CONFIG_OMAP_32K_TIMER
/* Errata 1.4
* If a General Purpose Timer (GPTimer) is in posted mode
* (TSIRC.POSTED=1), due to internal resynchronizations, values
* read in TCRR, TCAR1 and TCAR2 registers right after the
* timer interface clock (L4) goes from stopped to active may
* not return the expected values. The most common event
* leading to this situation occurs upon wake up from idle.
*
* Software has to wait at least (2 timer interface clock
* cycles + 1 timer functional clock cycle) after L4 clock
* wakeup before reading TCRR, TCAR1 or TCAR2 registers for
* GPTimers in POSTED internal synchro- nization mode, and
* before reading WCRR register of the Watchdog timers . The
* same workaround must be applied before reading CR and
* 32KSYNCNT_REV registers of the synctimer module.
*
* Wait Period = 2 timer interface clock cycles +
* 1 timer functional clock cycle
* Interface clock = L4 clock (50MHz worst case).
* Functional clock = 32KHz
* Wait Period = 2*10^-6/50 + 1/32768 = 0.000030557 = 30.557us
* Rounding off the delay value to a safer 50us.
*/
udelay(GPTIMER_WAIT_DELAY);
#endif
/* Disable autoidling of GPT1.
*/
CM_AUTOIDLE_WKUP &= ~(0x1);
}
DPRINTK("MPU state:%x, CORE state:%x\n",
PM_PREPWSTST_MPU, PM_PREPWSTST_CORE);
/* Do wakeup event check s*/
post_uart_activity();
/* Update stats for sysfs entries.
*/
store_prepwst();
return_sleep_time:
getnstimeofday(&ts_postidle);
#if defined(CONFIG_SYSFS) && defined(DEBUG_BAIL_STATS)
ts_last_wake_up = ts_postidle;
#endif
ts_idle = timespec_sub(ts_postidle, ts_preidle);
if (cx->type > OMAP3_STATE_C2)
sched_clock_idle_wakeup_event(timespec_to_ns(&ts_idle));
DEBUG_STATE_PRINT(core_sleep_flg);
local_irq_enable();
local_fiq_enable();
return (u32)timespec_to_ns(&ts_idle)/1000;
}
/**
* tick_program_event
*/
int tick_program_event(ktime_t expires, int force)
{
struct clock_event_device *dev = __this_cpu_read(tick_cpu_device.evtdev);
return clockevents_program_event(dev, expires, force);
}
