void flash_hw_initUnbuffered(Flash *fls, UNUSED_ARG(int, flags))
{
common_init(fls);
fls->blk.priv.vt = &flash_lm3s_unbuffered_vt;
}
/* ---
*/
void realmain(int argc, char **argv)
{
char b[256];
struct stat statbuf;
buffer *buf = NULL;
char path[1024];
int i;
setlocale(LC_NUMERIC, "C");
common_init("Pathetic Writer %s. No Warranty");
sprintf(b, "%s/%ld", siag_basedir, (long)getpid());
mkdir(b, 0700);
sprintf(b, "%s/pw.scm", siag_basedir);
pwrc = MwStrdup(b);
init_interpreters();
siod_interpreter = init_parser(argc, argv);
init_python_parser();
init_guile_parser();
init_ruby_parser();
waitforchild(0);
MwMallocInit(NULL, 0);
init_position();
init_cmds();
buf = new_buffer("noname.pw", "noname.pw");
sprintf(path, "%s/pw/pw.scm", datadir);
if (stat(path, &statbuf)) {
fprintf(stderr, "Can't find the runtime library (pw.scm).\n");
fprintf(stderr, "Expected it in %s\n", path);
fprintf(stderr, "SIAGHOME (if set) is '%s'\n", datadir);
fprintf(stderr, "Please read installation instructions.\n");
exit(EXIT_FAILURE);
}
setvar(cintern("libdir"), strcons(-1, libdir), NIL);
setvar(cintern("datadir"), strcons(-1, datadir), NIL);
setvar(cintern("docdir"), strcons(-1, docdir), NIL);
/* load runtime library */
sprintf(b, "(load \"%s/pw/pw.scm\")", datadir);
execute(b);
init_windows(buf, &argc, argv);
setlocale(LC_NUMERIC, "C"); /* again, because X hosed it */
/* load user customizations, if any */
if (!stat(pwrc, &statbuf)) {
sprintf(b, "(load \"%s\")", pwrc);
execute(b);
}
execute("(init-windows)");
execute("(create-menus)");
fileio_init();
for (i = 1; i < argc; i++) {
if (argv[i][0] != '-') {
strcpy(path, argv[i]);
buf = new_buffer(buffer_name(argv[i]), path);
loadmatrix(path, buf, guess_file_format(path));
w_list->buf = buf;
}
}
pr_scr_flag = TRUE;
/* this works, for reasons beyond my comprehension */
execute("(print-version)");
execute("(print-version)");
activate_window(w_list);
#ifdef HAVE_LIBTCL
Tcl_Main(argc, argv, Tcl_AppInit);
#else
mainloop();
#endif
}
Adafruit_GPS::Adafruit_GPS(NewSoftSerial *ser)
#endif
{
common_init(); // Set everything to common state, then...
gpsSwSerial = ser; // ...override gpsSwSerial with value passed.
}
GPS_5Hz::GPS_5Hz(NewSoftSerial *ser)
#endif
{
common_init(); // inicializa todo comunmente, y luego...
gpsSwSerial = ser; // ...se modifica gpsSwSerial con el valor pasado.
}
/*
* important note - this routine should only be called if the RPC system has
* been suspended via a call to rpc_suspend(); it is here primarily to enable
* the rapid snapshot capability required by the Homework cache.
*
* normal mode of use
*
* rpc_suspend();
* pid = fork();
* if (pid != 0) { // parent branch
* if (pid == -1) { // error
* rpc_resume();
* // note error
* } else { // wait for child to terminate
* int status;
* (void) wait(&status);
* rpc_resume();
* // success or error depending upon value of status
* }
* } else { // child branch
* pid_t pid = fork(); // zombie-free zone
* if (pid == -1)
* exit(1);
* else if (pid != 0)
* exit(0);
* rpc_reinit(new port number);
* }
*
*/
int rpc_reinit(unsigned short port) {
ctable_purge();
close(my_sock);
return common_init(port);
}
camera_VC0706::camera_VC0706(NewSoftSerial *ser) {
#endif
common_init(); // Set everything to common state, then...
swSerial = ser; // ...override swSerial with value passed.
}
/*******************************************************************************
Name: utm_common_init
Purpose: Initialization routine for initializing the UTM projection information
that is common to both the forward and inverse transformations.
Returns:
GCTP_SUCCESS or GCTP_ERROR
*******************************************************************************/
static int utm_common_init
(
TRANSFORMATION *trans /* I/O: transformation to initialize */
)
{
double r_major; /* major axis */
double r_minor; /* minor axis */
double radius; /* earth radius */
double scale_factor; /* scale factor */
double center_long;
double lat_origin;
double false_easting;
double false_northing;
int zone; /* zone number */
const GCTP_PROJECTION *proj = &trans->proj;
int spheroid = proj->spheroid;
/* set Clarke 1866 spheroid if negative spheroid code */
if (spheroid < 0)
spheroid = 0;
gctp_get_spheroid(spheroid, proj->parameters, &r_major, &r_minor, &radius);
zone = proj->zone;
if (zone == 0)
{
/* The zone is zero, so calculate it from the first two projection
parameters */
double lon1;
double lat1;
/* Convert the longitude and latitude from DMS to degrees */
if (gctp_dms2degrees(proj->parameters[0], &lon1) != GCTP_SUCCESS)
{
GCTP_PRINT_ERROR("Error converting longitude in parameter 0 from "
"DMS to degrees: %f", proj->parameters[0]);
return GCTP_ERROR;
}
lon1 *= 3600 * S2R;
if (gctp_dms2degrees(proj->parameters[1], &lat1) != GCTP_SUCCESS)
{
GCTP_PRINT_ERROR("Error converting latitude in parameter 1 from "
"DMS to degrees: %f", proj->parameters[1]);
return GCTP_ERROR;
}
lat1 *= 3600 * S2R;
/* Calculate the zone from the longitude */
zone = gctp_calc_utm_zone(lon1 * R2D);
/* Use the convention of a negative zone for the southern hemisphere */
if (lat1 < 0)
zone = -zone;
}
scale_factor = .9996;
/* Verify the zone is a legal value */
if ((abs(zone) < 1) || (abs(zone) > 60))
{
GCTP_PRINT_ERROR("Illegal zone number: %d", zone);
return GCTP_ERROR;
}
lat_origin = 0.0;
center_long = ((6 * abs(zone)) - 183) * D2R;
false_easting = 500000.0;
false_northing = (zone < 0) ? 10000000.0 : 0.0;
trans->print_info = utm_print_info;
return common_init(trans, r_major, r_minor, scale_factor, center_long,
lat_origin, false_easting, false_northing);
}
AsyncConnection::AsyncConnection(const boost::shared_ptr<boost::asio::ip::tcp::socket>& socket)
:io_service_(&socket->get_io_service()), socket_(socket)
{
common_init();
}
// Constructor when using USARTSerial
Adafruit_VC0706::Adafruit_VC0706(USARTSerial *ser) {
common_init(); // Set everything to common state, then...
serial = ser; // ...override serial with value passed.
}
AsyncConnection::AsyncConnection()
:io_service_(0)
{
common_init();
}
AsyncConnection::AsyncConnection(boost::asio::io_service& io_service)
:io_service_(&io_service)
{
socket_.reset(new boost::asio::ip::tcp::socket(io_service));
common_init();
}
static av_cold int decode_init(AVCodecContext *avctx)
{
avctx->pix_fmt = AV_PIX_FMT_YUV411P;
return common_init(avctx);
}
int
main(int argc, char **argv)
{
int what_signal, i;
char *ent_pnt = "main";
char logname[20];
char *l_mess, *lc_mess;
sigset_t sigwait_set;
struct sigaction sig_action;
dev_ptr_tbl_t *dev_ptr_tbl;
shm_ptr_tbl_t *shm_ptr_tbl;
sam_defaults_t *defaults;
if (argc != 4)
exit(1);
initialize_fatal_trap_processing(SOLARIS_THREADS, fatal_cleanup);
CustmsgInit(1, NULL);
library = (library_t *)malloc_wait(sizeof (library_t), 2, 0);
(void) memset(library, 0, sizeof (library_t));
/*
* Crack the arguments
*/
argv++;
master_shm.shmid = atoi(*argv);
argv++;
preview_shm.shmid = atoi(*argv);
argv++;
library->eq = atoi(*argv);
mypid = getpid();
if ((master_shm.shared_memory = shmat(master_shm.shmid, NULL, 0774)) ==
(void *)-1)
exit(2);
shm_ptr_tbl = (shm_ptr_tbl_t *)master_shm.shared_memory;
if ((preview_shm.shared_memory =
shmat(preview_shm.shmid, NULL, 0774)) == (void *)-1)
exit(3);
fifo_path = strdup(SHM_REF_ADDR(shm_ptr_tbl->fifo_path));
sprintf(logname, "sony-%d", library->eq);
defaults = GetDefaults();
openlog(logname, LOG_PID | LOG_NOWAIT, defaults->log_facility);
dev_ptr_tbl = (dev_ptr_tbl_t *)SHM_REF_ADDR(
((shm_ptr_tbl_t *)master_shm.shared_memory)->dev_table);
/* LINTED pointer cast may result in improper alignment */
library->un = (dev_ent_t *)
SHM_REF_ADDR(dev_ptr_tbl->d_ent[library->eq]);
/* LINTED pointer cast may result in improper alignment */
library->help_msg = (sony_priv_mess_t *)
SHM_REF_ADDR(library->un->dt.rb.private);
l_mess = library->un->dis_mes[DIS_MES_NORM];
lc_mess = library->un->dis_mes[DIS_MES_CRIT];
/* check if we should log sef data */
(void) sef_status();
if (DBG_LVL(SAM_DBG_RBDELAY)) {
int ldk = 60;
sam_syslog(LOG_DEBUG, "Waiting for 60 seconds.");
while (ldk > 0 && DBG_LVL(SAM_DBG_RBDELAY)) {
sprintf(lc_mess, "waiting for %d seconds pid %d",
ldk, mypid);
sleep(10);
ldk -= 10;
}
*lc_mess = '\0';
}
mutex_init(&library->mutex, USYNC_THREAD, NULL);
/*
* Hold the lock until initialization is complete
*/
mutex_lock(&library->mutex);
common_init(library->un);
mutex_init(&library->help_msg->mutex, USYNC_PROCESS, NULL);
cond_init(&library->help_msg->cond_i, USYNC_PROCESS, NULL);
cond_init(&library->help_msg->cond_r, USYNC_PROCESS, NULL);
library->help_msg->mtype = SONY_PRIV_VOID;
/*
* Start the main threads
*/
if (thr_create(NULL, DF_THR_STK, monitor_msg, (void *)library,
(THR_BOUND | THR_NEW_LWP | THR_DETACHED),
&threads[SONY_MSG_THREAD])) {
sam_syslog(LOG_ERR,
"Unable to start thread monitor_msg: %m.\n");
thr_exit(NULL);
}
if (thr_create(NULL, MD_THR_STK, manage_list, (void *)library,
(THR_BOUND |THR_NEW_LWP | THR_DETACHED),
&threads[SONY_WORK_THREAD])) {
sam_syslog(LOG_ERR,
"Unable to start thread manage_list: %m.\n");
thr_kill(threads[SONY_MSG_THREAD], SIGINT);
thr_exit(NULL);
}
mutex_lock(&library->un->mutex);
library->un->dt.rb.process = getpid();
library->un->status.b.ready = FALSE;
library->un->status.b.present = FALSE;
mutex_unlock(&library->un->mutex);
/*
* Initialize the library. This will release the library mutex.
*/
memccpy(l_mess, catgets(catfd, SET, 9065, "initializing"),
'\0', DIS_MES_LEN);
if (initialize(library, dev_ptr_tbl))
thr_exit(NULL);
/*
* Now let the other threads run
*/
thr_yield();
mutex_lock(&library->mutex);
i = 30;
{
char *MES_9155 = catgets(catfd, SET, 9155,
"waiting for %d drives to initialize");
char *mes = (char *)malloc_wait(strlen(MES_9155) + 15, 5, 0);
while (library->countdown && i-- > 0) {
sprintf(mes, MES_9155, library->countdown);
memccpy(l_mess, mes, '\0', DIS_MES_LEN);
sam_syslog(LOG_INFO, catgets(catfd, SET, 9156,
"%s: Waiting for %d drives to initialize."),
ent_pnt, library->countdown);
mutex_unlock(&library->mutex);
sleep(10);
mutex_lock(&library->mutex);
}
free(mes);
}
if (i <= 0)
sam_syslog(LOG_INFO,
catgets(catfd, SET, 9157,
"%s: %d drive(s) did not initialize."),
ent_pnt, library->countdown);
mutex_unlock(&library->mutex);
memccpy(l_mess, "running", '\0', DIS_MES_LEN);
mutex_lock(&library->un->mutex);
library->un->status.b.audit = FALSE;
library->un->status.b.requested = FALSE;
library->un->status.b.mounted = TRUE;
library->un->status.b.ready = TRUE;
mutex_unlock(&library->un->mutex);
/*
* Now that the daemon is fully initialized, the main thread is
* just used to monitor the thread state and an indication of shutdown.
* This is accomplished using the signals SIGALRM, SIGINT, and SIGTERM.
* This is not done with a signal handler, but using the sigwait() call.
*/
sigemptyset(&sigwait_set);
sigaddset(&sigwait_set, SIGINT);
sigaddset(&sigwait_set, SIGTERM);
sigaddset(&sigwait_set, SIGALRM);
/* want to restart system calls */
sig_action.sa_handler = SIG_DFL;
sigemptyset(&sig_action.sa_mask);
sig_action.sa_flags = SA_RESTART;
sigaction(SIGINT, &sig_action, NULL);
sigaction(SIGTERM, &sig_action, NULL);
sigaction(SIGALRM, &sig_action, NULL);
for (;;) {
alarm(20);
what_signal = sigwait(&sigwait_set);
switch (what_signal) {
case SIGALRM:
if ((threads[SONY_MSG_THREAD] ==
(thread_t)-1) ||
(threads[SONY_WORK_THREAD] ==
(thread_t)-1)) {
/*
* If any of the processing threads
* have disappeared, log the
* fact, and take a core dump
*/
sam_syslog(LOG_INFO,
"%s: SIGALRM: Thread(s) gone.",
ent_pnt);
abort();
}
break;
/*
* For a normal shutdown of the robot daemon:
* 1) prevent the alarm from going off during
* shutdown and causing a core dump
* 2) log the reason we are shutting down
* 3) kill the helper pid if there is one
* 4) terminate the connection to the catalog
* 5) terminate all of the processing threads
*/
case SIGINT:
case SIGTERM:
sigdelset(&sigwait_set, SIGALRM);
sam_syslog(LOG_INFO,
"%s: Shutdown by signal %d",
ent_pnt, what_signal);
if (library->helper_pid > 0) {
kill(library->helper_pid, 9);
}
kill_off_threads(library);
exit(0);
break;
default:
break;
}
}
}
int main(int argc, char **argv) {
int command = -1;
int playing = 1;
int sock;
unsigned int addrlen = sizeof(struct sockaddr_in);
unsigned int port = 40642;
sockaddr_in addr;
char move = EOF;
common_init(argc, argv, port, addr.sin_addr.s_addr);
addr.sin_family = AF_INET;
addr.sin_port = htons(port);
sock = Socket(PF_INET, SOCK_STREAM, 0);
Connect(sock, (struct sockaddr *)&addr, addrlen);
Read(sock, &player.x, sizeof(int));
Read(sock, &player.y, sizeof(int));
p_torpedo.x = p_torpedo.y = -1;
s_torpedo.x = s_torpedo.y = -1;
while (playing) {
display();
do {
move = getchar();
} while (move != EOF && !isalpha(move));
switch(move) {
case 'r': player.x = (player.x + 1) % GRID_SZ;
command = MOVE;
break;
case 'l': player.x = (player.x + GRID_SZ - 1) % GRID_SZ;
command = MOVE;
break;
case 'd': player.y = (player.y + 1) % GRID_SZ;
command = MOVE;
break;
case 'u': player.y = (player.y + GRID_SZ - 1) % GRID_SZ;
command = MOVE;
break;
case 'f': printf("Enter target position (x y) => ");
command = FIRE;
scanf("%d %d", &p_torpedo.x, &p_torpedo.y);
break;
case 's': printf("\n***** GAME OVER - You have surrendered! *****\n");
case EOF: command = SURRENDER;
break;
default: printf("Sorry, I don't understand the command '%c'.\n", move);
printf("Enter your move => ");
}
Write(sock, &command, sizeof(int));
if (command == FIRE) {
Write(sock, &p_torpedo, sizeof(pos));
} else if (command == SURRENDER) {
break;
}
Read(sock, &command, sizeof(int));
if (command == HIT) {
player_score++;
}
Read(sock, &command, sizeof(int));
switch (command) {
case FIRE: Read(sock, &s_torpedo, sizeof(pos));
if (s_torpedo.x == player.x && s_torpedo.y == player.y) {
command = HIT;
server_score++;
} else {
command = MISS;
}
break;
case MOVE: command = ACK;
}
Write(sock, &command, sizeof(int));
if (player_score == max_score || server_score == max_score) {
command = SURRENDER;
Write(sock, &command, sizeof(int));
playing = 0;
}
}
if (player_score == max_score) {
printf("You have won!\n");
} else if (server_score == max_score) {
printf("You have lost!\n");
}
return 0;
}
void flash_hw_initUnbuffered(Flash *fls, int flags)
{
common_init(fls);
fls->blk.priv.vt = &flash_lm3s_unbuffered_vt;
fls->blk.priv.flags |= flags;
}
int main()
{
Scene &scene = fragmic.scene_get();
Assets &assets = scene.assets_get();
Physics &physics = fragmic.physics_get();
{
Node *camera_node = scene.node_camera_get();
common_init(fragmic);
common_fpcamera_use(camera_node);
common_debug_use();
}
/*
{
Node &node = scene.model_load("data/game_assets/", "box.dae");
}
*/
/*
{
Node &node = *scene.node_create("box");
node.mesh->cube_generate(3.0f);
node.material->color_set(glm::vec3(1.f, 0.f, 0.f),
glm::vec3(0.f, 1.f, 0.f), glm::vec3(0.f, 0.f, 1.f), 40.f);
scene.upload_queue_add(node);
}
*/
/*
Node *light_node = scene.node_create("Light");
Light *light = light_node->light_create(assets);
light->properties_type_set(LIGHT_DIRECTIONAL);
light->properties_direction_set(glm::vec3(0, -1, 0));
light->properties_set(glm::vec3(0.2, 0.2, 0.2), glm::vec3(1, 1, 1), glm::vec3(1.0, 1.0, 1.0));
Node &base_node = scene.model_load("data/", "base.dae", MODEL_IMPORT_OPTIMIZED);
physics.collision_shape_add(base_node, PHYSICS_COLLISION_BOX, true, 0);
std::unique_ptr<Material> material(new Material());
material->cubemap_create(CUBEMAP_REFLECTION, "data/game_assets/skybox/SkyboxSet1/DarkStormy/", "DarkStormyFront2048.png",
"DarkStormyBack2048.png", "bar.png", "foo.png", "DarkStormyLeft2048.png", "DarkStormyRight2048.png");
{
Node &node_root = scene.model_load("data/game_assets/", "sphere.dae");
Node &sphere = *scene.node_find(&node_root, "Sphere");
Node &cube = *scene.node_find(&node_root, "Cube");
Node &suzanne= *scene.node_find(&node_root, "Suzanne");
cube.material_set(material.get());
sphere.material_set(material.get());
suzanne.material_set(material.get());
scene.state_update_recursive(sphere);
scene.state_update_recursive(cube);
scene.state_update_recursive(suzanne);
physics.collision_shape_add(node_root, PHYSICS_COLLISION_CONVEX_HULL, true, 1.f);
Light *point_light = cube.light_create(assets);
point_light->properties_type_set(LIGHT_POINT);
point_light->properties_set(glm::vec3(0.2, 0.2, 0.2), glm::vec3(1.0, 1.0, 1.0), glm::vec3(1.0, 1.0, 1.0));
point_light->bias_set(glm::vec3(-1, 2.2, -1));
}
physics.pause();
{
Node &node = *scene.node_create("skybox");
Mesh *mesh = node.mesh_create(assets);
Material *material = node.material_create(assets);
mesh->cube_generate(150.0f);
material->cubemap_create(CUBEMAP_SKYBOX, "data/game_assets/skybox/SkyboxSet1/DarkStormy/", "DarkStormyFront2048.png",
"DarkStormyBack2048.png", "bar.png", "foo.png", "DarkStormyLeft2048.png", "DarkStormyRight2048.png");
scene.upload_queue_add(node);
}
*/
scene.scene_graph_print(true);
fragmic.run();
fragmic.term();
return true;
}
/*
* server -- run server and process clients requests
*/
int
server(const struct test_case *tc, int argc, char *argv[])
{
int ret;
struct req_arg arg = {
.resp = RESP_ATTR_INIT,
.pool_attr = POOL_ATTR_INIT,
.closing = 0,
};
struct rpmemd_obc *obc;
obc = rpmemd_obc_init(0, 1);
UT_ASSERTne(obc, NULL);
ret = rpmemd_obc_status(obc, 0);
UT_ASSERTeq(ret, 0);
while (1) {
ret = rpmemd_obc_process(obc, &REQ, &arg);
if (arg.closing) {
break;
} else {
UT_ASSERTeq(ret, 0);
}
}
ret = rpmemd_obc_process(obc, &REQ, &arg);
UT_ASSERTeq(ret, 1);
rpmemd_obc_fini(obc);
return 0;
}
/*
* test_cases -- available test cases
*/
static struct test_case test_cases[] = {
TEST_CASE(server),
TEST_CASE(client_create),
TEST_CASE(client_open),
};
#define NTESTS (sizeof(test_cases) / sizeof(test_cases[0]))
int
main(int argc, char *argv[])
{
START(argc, argv, "rpmem_obc");
common_init("rpmem_fip",
"RPMEM_LOG_LEVEL",
"RPMEM_LOG_FILE", 0, 0);
rpmemd_log_init("rpmemd", getenv("RPMEMD_LOG_FILE"), 0);
rpmemd_log_level = rpmemd_log_level_from_str(
getenv("RPMEMD_LOG_LEVEL"));
TEST_CASE_PROCESS(argc, argv, test_cases, NTESTS);
common_fini();
rpmemd_log_close();
DONE(NULL);
}
static void john_init(char *name, int argc, char **argv)
{
int show_usage = 0;
int make_check = (argc == 2 && !strcmp(argv[1], "--make_check"));
if (make_check)
argv[1] = "--test=0";
CPU_detect_or_fallback(argv, make_check);
status_init(NULL, 1);
if (argc < 2 ||
(argc == 2 &&
(!strcasecmp(argv[1], "--help") ||
!strcasecmp(argv[1], "-h") ||
!strcasecmp(argv[1], "-help"))))
{
john_register_all(); /* for printing by opt_init() */
show_usage = 1;
}
opt_init(name, argc, argv, show_usage);
/*
* --list=? needs to be supported, because it has been supported in the released
* john-1.7.9-jumbo-6 version, and it is used by the bash completion script.
* --list=? is, however, not longer mentioned in doc/OPTIONS and in the usage
* output. Instead, --list=help is.
*/
if (options.listconf &&
(!strcasecmp(options.listconf, "help") ||
!strcmp(options.listconf, "?")))
{
john_list_options();
exit(0);
}
if (options.listconf &&
(!strcasecmp(options.listconf, "help:help") ||
!strcasecmp(options.listconf, "help:")))
{
john_list_help_options();
exit(0);
}
if (options.listconf && !strcasecmp(options.listconf, "help:format-methods"))
{
john_list_method_names();
exit(0);
}
if (options.listconf && !strncasecmp(options.listconf, "help:", 5))
{
if (strcasecmp(options.listconf, "help:parameters") &&
strcasecmp(options.listconf, "help:list-data"))
{
fprintf(stderr,
"%s is not a --list option that supports additional values.\nSupported options:\n",
options.listconf+5);
john_list_help_options();
exit(1);
}
}
if (options.listconf && !strcasecmp(options.listconf, "hidden-options"))
{
puts("--help print usage summary, just like running the command");
puts(" without any parameters");
puts("--subformat=FORMAT pick a benchmark format for --format=crypt");
puts("--mkpc=N force a lower max. keys per crypt");
puts("--length=N force a lower max. length");
puts("--field-separator-char=C use 'C' instead of the ':' in input and pot files");
puts("--fix-state-delay=N performance tweak, see documentation");
puts("--log-stderr log to screen instead of file\n");
exit(0);
}
if (!make_check) {
#if defined(_OPENMP) && OMP_FALLBACK
#if defined(__DJGPP__) || defined(__CYGWIN32__)
#error OMP_FALLBACK is incompatible with the current DOS and Win32 code
#endif
if (!getenv("JOHN_NO_OMP_FALLBACK") &&
omp_get_max_threads() <= 1) {
#define OMP_FALLBACK_PATHNAME JOHN_SYSTEMWIDE_EXEC "/" OMP_FALLBACK_BINARY
execv(OMP_FALLBACK_PATHNAME, argv);
perror("execv: " OMP_FALLBACK_PATHNAME);
}
#endif
path_init(argv);
if (options.listconf && !strcasecmp(options.listconf,
"build-info"))
{
puts("Version: " JOHN_VERSION);
puts("Build: " JOHN_BLD _MP_VERSION);
printf("Arch: %d-bit %s\n", ARCH_BITS,
ARCH_LITTLE_ENDIAN ? "LE" : "BE");
#if JOHN_SYSTEMWIDE
puts("System-wide exec: " JOHN_SYSTEMWIDE_EXEC);
puts("System-wide home: " JOHN_SYSTEMWIDE_HOME);
puts("Private home: " JOHN_PRIVATE_HOME);
#endif
printf("$JOHN is %s\n", path_expand("$JOHN/"));
printf("Format interface version: %d\n", FMT_MAIN_VERSION);
puts("Rec file version: " RECOVERY_V);
puts("Charset file version: " CHARSET_V);
printf("CHARSET_MIN: %d (0x%02x)\n", CHARSET_MIN,
CHARSET_MIN);
printf("CHARSET_MAX: %d (0x%02x)\n", CHARSET_MAX,
CHARSET_MAX);
printf("CHARSET_LENGTH: %d\n", CHARSET_LENGTH);
printf("Max. Markov mode level: %d\n", MAX_MKV_LVL);
printf("Max. Markov mode password length: %d\n", MAX_MKV_LEN);
#ifdef __VERSION__
printf("Compiler version: %s\n", __VERSION__);
#endif
#ifdef __GNUC__
printf("gcc version: %d.%d.%d\n", __GNUC__,
__GNUC_MINOR__, __GNUC_PATCHLEVEL__);
#endif
#ifdef __ICC
printf("icc version: %d\n", __ICC);
#endif
#ifdef __clang_version__
printf("clang version: %s\n", __clang_version__);
#endif
#ifdef OPENSSL_VERSION_NUMBER
// The man page suggests the type of OPENSSL_VERSION_NUMBER is long,
// gcc insists it is int.
printf("OpenSSL library version: %lx", (unsigned long)OPENSSL_VERSION_NUMBER);
// FIXME: How do I detect a missing library?
// Even if if is extremely unlikely that openssl is missing,
// at least flush all output buffers...
fflush(NULL);
if ((unsigned long)OPENSSL_VERSION_NUMBER != (unsigned long)SSLeay())
printf("\t(loaded: %lx)", (unsigned long)SSLeay());
printf("\n");
#endif
exit(0);
}
}
if (options.listconf && !strcasecmp(options.listconf, "encodings"))
{
listEncodings();
exit(0);
}
#ifdef CL_VERSION_1_0
if (options.listconf && !strcasecmp(options.listconf, "opencl-devices"))
{
listOpenCLdevices();
exit(0);
}
#endif
#ifdef HAVE_CUDA
if (options.listconf && !strcasecmp(options.listconf, "cuda-devices"))
{
cuda_device_list();
exit(0);
}
#endif
if (!make_check) {
if (options.config)
{
path_init_ex(options.config);
cfg_init(options.config, 1);
cfg_init(CFG_FULL_NAME, 1);
cfg_init(CFG_ALT_NAME, 0);
}
else
{
#if JOHN_SYSTEMWIDE
cfg_init(CFG_PRIVATE_FULL_NAME, 1);
cfg_init(CFG_PRIVATE_ALT_NAME, 1);
#endif
cfg_init(CFG_FULL_NAME, 1);
cfg_init(CFG_ALT_NAME, 0);
}
}
/* This is --crack-status. We toggle here, so if it's enabled in
john.conf, we can disable it using the command line option */
if (cfg_get_bool(SECTION_OPTIONS, NULL, "CrackStatus", 0))
options.flags ^= FLG_CRKSTAT;
initUnicode(UNICODE_UNICODE); /* Init the unicode system */
john_register_all(); /* maybe restricted to one format by options */
if ((options.subformat && !strcasecmp(options.subformat, "list")) ||
(options.listconf && !strcasecmp(options.listconf, "subformats")))
{
dynamic_DISPLAY_ALL_FORMATS();
/* NOTE if we have other 'generics', like sha1, sha2, rc4, ...
* then EACH of them should have a DISPLAY_ALL_FORMATS()
* function and we can call them here. */
exit(0);
}
if (options.listconf && !strcasecmp(options.listconf, "inc-modes"))
{
cfg_print_subsections("Incremental", NULL, NULL, 0);
exit(0);
}
if (options.listconf && !strcasecmp(options.listconf, "rules"))
{
cfg_print_subsections("List.Rules", NULL, NULL, 0);
exit(0);
}
if (options.listconf && !strcasecmp(options.listconf, "externals"))
{
cfg_print_subsections("List.External", NULL, NULL, 0);
exit(0);
}
if (options.listconf && !strcasecmp(options.listconf, "sections"))
{
cfg_print_section_names(0);
exit(0);
}
if (options.listconf &&
!strncasecmp(options.listconf, "parameters", 10) &&
(options.listconf[10] == '=' || options.listconf[10] == ':') &&
options.listconf[11] != '\0')
{
cfg_print_section_params(&options.listconf[11], NULL);
exit(0);
}
if (options.listconf &&
!strncasecmp(options.listconf, "list-data", 9) &&
(options.listconf[9] == '=' || options.listconf[9] == ':') &&
options.listconf[10] != '\0')
{
cfg_print_section_list_lines(&options.listconf[10], NULL);
exit(0);
}
if (options.listconf && !strcasecmp(options.listconf, "ext-filters"))
{
cfg_print_subsections("List.External", "filter", NULL, 0);
exit(0);
}
if (options.listconf && !strcasecmp(options.listconf, "ext-filters-only"))
{
cfg_print_subsections("List.External", "filter", "generate", 0);
exit(0);
}
if (options.listconf && !strcasecmp(options.listconf, "ext-modes"))
{
cfg_print_subsections("List.External", "generate", NULL, 0);
exit(0);
}
if (options.listconf &&
!strcasecmp(options.listconf, "formats")) {
int column;
struct fmt_main *format;
int i, dynamics = 0;
char **formats_list;
i = 0;
format = fmt_list;
while ((format = format->next))
i++;
formats_list = malloc(sizeof(char*) * i);
i = 0;
format = fmt_list;
do {
char *label = format->params.label;
if (!strncmp(label, "dynamic", 7)) {
if (dynamics++)
continue;
else
label = "dynamic_n";
}
formats_list[i++] = label;
} while ((format = format->next));
formats_list[i] = NULL;
column = 0;
i = 0;
do {
int length;
char *label = formats_list[i++];
length = strlen(label) + 2;
column += length;
if (column > 78) {
printf("\n");
column = length;
}
printf("%s%s", label, formats_list[i] ? ", " : "\n");
} while (formats_list[i]);
free(formats_list);
exit(0);
}
if (options.listconf &&
!strcasecmp(options.listconf, "format-details")) {
struct fmt_main *format;
format = fmt_list;
do {
int ntests = 0;
if(format->params.tests) {
while (format->params.tests[ntests++].ciphertext);
ntests--;
}
printf("%s\t%d\t%d\t%d\t%08x\t%d\t%s\t%s\t%s\t%d\t%d\t%d\n",
format->params.label,
format->params.plaintext_length,
format->params.min_keys_per_crypt,
format->params.max_keys_per_crypt,
format->params.flags,
ntests,
format->params.algorithm_name,
format->params.format_name,
format->params.benchmark_comment,
format->params.benchmark_length,
format->params.binary_size,
((format->params.flags & FMT_DYNAMIC) && format->params.salt_size) ?
// salts are handled internally within the format. We want to know the 'real' salt size
// dynamic will alway set params.salt_size to 0 or sizeof a pointer.
dynamic_real_salt_length(format) : format->params.salt_size);
} while ((format = format->next));
exit(0);
}
if (options.listconf &&
!strcasecmp(options.listconf, "format-all-details")) {
struct fmt_main *format;
format = fmt_list;
do {
int ntests = 0;
if(format->params.tests) {
while (format->params.tests[ntests++].ciphertext);
ntests--;
}
/*
* attributes should be printed in the same sequence
* as with format-details, but human-readable
*/
printf("Format label \t%s\n", format->params.label);
printf("Max. password length in bytes \t%d\n", format->params.plaintext_length);
printf("Min. keys per crypt \t%d\n", format->params.min_keys_per_crypt);
printf("Max. keys per crypt \t%d\n", format->params.max_keys_per_crypt);
printf("Flags\n");
printf(" Case sensitive \t%s\n", (format->params.flags & FMT_CASE) ? "yes" : "no");
printf(" Supports 8-bit characters \t%s\n", (format->params.flags & FMT_8_BIT) ? "yes" : "no");
printf(" Converts 8859-1 to UTF-16/UCS-2\t%s\n", (format->params.flags & FMT_UNICODE) ? "yes" : "no");
printf(" Honours --encoding=NAME \t%s\n", (format->params.flags & FMT_UTF8) ? "yes" : "no");
printf(" False positives possible \t%s\n", (format->params.flags & FMT_NOT_EXACT) ? "yes" : "no");
printf(" Uses a bitslice implementation \t%s\n", (format->params.flags & FMT_BS) ? "yes" : "no");
printf(" The split() method unifies case\t%s\n", (format->params.flags & FMT_SPLIT_UNIFIES_CASE) ? "yes" : "no");
printf(" A $dynamic$ format \t%s\n", (format->params.flags & FMT_DYNAMIC) ? "yes" : "no");
#ifdef _OPENMP
printf(" Parallelized with OpenMP \t%s\n", (format->params.flags & FMT_OMP) ? "yes" : "no");
#endif
printf("Number of test cases for --test \t%d\n", ntests);
printf("Algorithm name \t%s\n", format->params.algorithm_name);
printf("Format name \t%s\n", format->params.format_name);
printf("Benchmark comment \t%s\n", format->params.benchmark_comment);
printf("Benchmark length \t%d\n", format->params.benchmark_length);
printf("Binary size \t%d\n", format->params.binary_size);
printf("Salt size \t%d\n",
((format->params.flags & FMT_DYNAMIC) && format->params.salt_size) ?
// salts are handled internally within the format. We want to know the 'real' salt size/
// dynamic will alway set params.salt_size to 0 or sizeof a pointer.
dynamic_real_salt_length(format) : format->params.salt_size);
printf("\n");
} while ((format = format->next));
exit(0);
}
if (options.listconf &&
!strncasecmp(options.listconf, "format-methods", 14)) {
struct fmt_main *format;
format = fmt_list;
do {
int ShowIt = 1, i;
if (options.listconf[14] == '=' || options.listconf[14] == ':') {
ShowIt = 0;
if (!strcasecmp(&options.listconf[15], "set_key") ||
!strcasecmp(&options.listconf[15], "get_key") ||
!strcasecmp(&options.listconf[15], "crypt_all") ||
!strcasecmp(&options.listconf[15], "cmp_all") ||
!strcasecmp(&options.listconf[15], "cmp_one") ||
!strcasecmp(&options.listconf[15], "cmp_exact"))
ShowIt = 1;
else if (strcasecmp(&options.listconf[15], "init") && strcasecmp(&options.listconf[15], "prepare") &&
strcasecmp(&options.listconf[15], "valid") && strcasecmp(&options.listconf[15], "split") &&
strcasecmp(&options.listconf[15], "binary") && strcasecmp(&options.listconf[15], "clear_keys") &&
strcasecmp(&options.listconf[15], "salt") && strcasecmp(&options.listconf[15], "get_hash") &&
strcasecmp(&options.listconf[15], "get_hash[0]") && strcasecmp(&options.listconf[15], "get_hash[1]") &&
strcasecmp(&options.listconf[15], "get_hash[2]") && strcasecmp(&options.listconf[15], "get_hash[3]") &&
strcasecmp(&options.listconf[15], "get_hash[4]") && strcasecmp(&options.listconf[15], "get_hash[5]") &&
strcasecmp(&options.listconf[15], "set_salt") && strcasecmp(&options.listconf[15], "binary_hash") &&
strcasecmp(&options.listconf[15], "binary_hash[0]") && strcasecmp(&options.listconf[15], "binary_hash[1]") &&
strcasecmp(&options.listconf[15], "binary_hash[2]") && strcasecmp(&options.listconf[15], "binary_hash[3]") &&
strcasecmp(&options.listconf[15], "binary_hash[3]") && strcasecmp(&options.listconf[15], "binary_hash[5]") &&
strcasecmp(&options.listconf[15], "salt_hash"))
{
fprintf(stderr, "Error, invalid option (invalid method name) %s\n", options.listconf);
fprintf(stderr, "Valid method names are:\n");
john_list_method_names();
exit(1);
}
if (format->methods.init != fmt_default_init && !strcasecmp(&options.listconf[15], "init"))
ShowIt = 1;
if (format->methods.prepare != fmt_default_prepare && !strcasecmp(&options.listconf[15], "prepare"))
ShowIt = 1;
if (format->methods.valid != fmt_default_valid && !strcasecmp(&options.listconf[15], "valid"))
ShowIt = 1;
if (format->methods.split != fmt_default_split && !strcasecmp(&options.listconf[15], "split"))
ShowIt = 1;
if (format->methods.binary != fmt_default_binary && !strcasecmp(&options.listconf[15], "binary"))
ShowIt = 1;
if (format->methods.salt != fmt_default_salt && !strcasecmp(&options.listconf[15], "salt"))
ShowIt = 1;
if (format->methods.clear_keys != fmt_default_clear_keys && !strcasecmp(&options.listconf[15], "clear_keys"))
ShowIt = 1;
for (i = 0; i < 6; ++i) {
char Buf[20];
sprintf(Buf, "get_hash[%d]", i);
if (format->methods.get_hash[i] && format->methods.get_hash[i] != fmt_default_get_hash && !strcasecmp(&options.listconf[15], Buf))
ShowIt = 1;
}
if (format->methods.get_hash[0] && format->methods.get_hash[0] != fmt_default_get_hash && !strcasecmp(&options.listconf[15], "get_hash"))
ShowIt = 1;
for (i = 0; i < 6; ++i) {
char Buf[20];
sprintf(Buf, "binary_hash[%d]", i);
if (format->methods.binary_hash[i] && format->methods.binary_hash[i] != fmt_default_binary_hash && !strcasecmp(&options.listconf[15], Buf))
ShowIt = 1;
}
if (format->methods.binary_hash[0] && format->methods.binary_hash[0] != fmt_default_binary_hash && !strcasecmp(&options.listconf[15], "binary_hash"))
ShowIt = 1;
if (format->methods.salt_hash != fmt_default_salt_hash && !strcasecmp(&options.listconf[15], "salt_hash"))
ShowIt = 1;
if (format->methods.set_salt != fmt_default_set_salt && !strcasecmp(&options.listconf[15], "set_salt"))
ShowIt = 1;
}
if (ShowIt) {
int i;
printf("Methods overridden for: %s [%s] %s\n", format->params.label, format->params.algorithm_name, format->params.format_name);
if (format->methods.init != fmt_default_init)
printf("\tinit()\n");
if (format->methods.prepare != fmt_default_prepare)
printf("\tprepare()\n");
if (format->methods.valid != fmt_default_valid)
printf("\tvalid()\n");
if (format->methods.split != fmt_default_split)
printf("\tsplit()\n");
if (format->methods.binary != fmt_default_binary)
printf("\tbinary()\n");
if (format->methods.salt != fmt_default_salt)
printf("\tsalt()\n");
for (i = 0; i < 6; ++i)
if (format->methods.binary_hash[i] != fmt_default_binary_hash) {
if (format->methods.binary_hash[i])
printf("\t\tbinary_hash[%d]()\n", i);
else
printf("\t\tbinary_hash[%d]() (NULL pointer)\n", i);
}
if (format->methods.salt_hash != fmt_default_salt_hash)
printf("\tsalt_hash()\n");
if (format->methods.set_salt != fmt_default_set_salt)
printf("\tset_salt()\n");
// there is no default for set_key() it must be defined.
printf("\tset_key()\n");
// there is no default for get_key() it must be defined.
printf("\tget_key()\n");
if (format->methods.clear_keys != fmt_default_clear_keys)
printf("\tclear_keys()\n");
for (i = 0; i < 6; ++i)
if (format->methods.get_hash[i] != fmt_default_get_hash) {
if (format->methods.get_hash[i])
printf("\t\tget_hash[%d]()\n", i);
else
printf("\t\tget_hash[%d]() (NULL pointer)\n", i);
}
// there is no default for crypt_all() it must be defined.
printf("\tcrypt_all()\n");
// there is no default for cmp_all() it must be defined.
printf("\tcmp_all()\n");
// there is no default for cmp_one() it must be defined.
printf("\tcmp_one()\n");
// there is no default for cmp_exact() it must be defined.
printf("\tcmp_exact()\n");
printf("\n\n");
}
} while ((format = format->next));
exit(0);
}
/*
* Other --list=help:WHAT are processed earlier, but these require
* a valid config:
*/
if (options.listconf && !strcasecmp(options.listconf, "help:parameters"))
{
cfg_print_section_names(1);
exit(0);
}
if (options.listconf && !strcasecmp(options.listconf, "help:list-data"))
{
cfg_print_section_names(2);
exit(0);
}
/* --list last resort: list subsections of any john.conf section name */
if (options.listconf)
{
//printf("Subsections of [%s]:\n", options.listconf);
if (cfg_print_subsections(options.listconf, NULL, NULL, 1))
exit(0);
else {
fprintf(stderr, "Section [%s] not found.\n", options.listconf);
/* Just in case the user specified an invalid value
* like help or list...
* print the same list as with --list=?, but exit(1)
*/
john_list_options();
exit(1);
}
}
#ifdef CL_VERSION_1_0
if (!options.ocl_platform) {
if ((options.ocl_platform =
cfg_get_param(SECTION_OPTIONS, SUBSECTION_OPENCL, "Platform")))
platform_id = atoi(options.ocl_platform);
else
platform_id = -1;
}
if (!options.gpu_device) {
if ((options.gpu_device =
cfg_get_param(SECTION_OPTIONS, SUBSECTION_OPENCL, "Device")))
ocl_gpu_id = atoi(options.gpu_device);
else
ocl_gpu_id = -1;
}
if (platform_id == -1 || ocl_gpu_id == -1)
opencl_find_gpu(&ocl_gpu_id, &platform_id);
#endif
common_init();
sig_init();
john_load();
if (options.encodingStr && options.encodingStr[0])
log_event("- %s input encoding enabled", options.encodingStr);
}
// 硬件串口构造函数
camera_VC0706::camera_VC0706(HardwareSerial *ser) {
common_init(); // Set everything to common state, then...
hwSerial = ser; // ...override hwSerial with value passed.
}
int main(int argc, char **argv)
{
char *cmd = parse_cmdline(argc, argv, NOT_GUI);
int rc;
char buf[BUFLEN];
struct securid_token *t;
rc = common_init(cmd);
if (rc != ERR_NONE)
die("can't initialize: %s\n", stoken_errstr[rc]);
t = current_token;
if (!t)
die("error: no token present. Use 'stoken import' to add one.\n");
terminal_init();
if (!strcmp(cmd, "tokencode")) {
int days_left = securid_check_exp(t, adjusted_time());
if (days_left < 0 && !opt_force)
die("error: token has expired; use --force to override\n");
unlock_token(t, 1, NULL);
securid_compute_tokencode(t, adjusted_time(), buf);
puts(buf);
if (days_left < 14 && !opt_force)
warn("warning: token expires in %d day%s\n", days_left,
days_left == 1 ? "" : "s");
} else if (!strcmp(cmd, "import")) {
char *pass;
unlock_token(t, 0, &pass);
if (!opt_keep_password) {
pass = xmalloc(BUFLEN);
request_new_pass(pass);
}
t->is_smartphone = 0;
securid_encode_token(t, pass, opt_new_devid, buf);
rc = write_token_and_pin(buf, NULL, pass);
if (rc != ERR_NONE)
die("rcfile: error writing new token: %s\n",
stoken_errstr[rc]);
} else if (!strcmp(cmd, "export")) {
char *pass;
unlock_token(t, 0, &pass);
if (opt_new_password)
pass = opt_new_password;
else if (!opt_keep_password)
pass = NULL;
t->is_smartphone = opt_iphone || opt_android;
securid_encode_token(t, pass, opt_new_devid, buf);
print_formatted(buf);
} else if (!strcmp(cmd, "show")) {
unlock_token(t, 0, NULL);
securid_token_info(t, &print_token_info_line);
} else if (!strcmp(cmd, "setpin")) {
char *pass = NULL, pin[BUFLEN], confirm_pin[BUFLEN];
int len;
if (opt_file || opt_token)
die("error: setpin only operates on the rcfile token\n");
unlock_token(t, 0, &pass);
if (opt_new_pin) {
if (securid_pin_format_ok(opt_new_pin) != ERR_NONE)
die("error: invalid --new-pin format\n");
strncpy(pin, opt_new_pin, BUFLEN);
len = strlen(pin);
} else {
prompt("Enter new PIN: ");
len = read_user_input(pin, BUFLEN, 1);
if (len > 0 && securid_pin_format_ok(pin) != ERR_NONE)
die("error: PIN must be 4-8 digits\n");
prompt("Confirm new PIN: ");
read_user_input(confirm_pin, BUFLEN, 1);
if (strcmp(pin, confirm_pin) != 0)
die("error: PINs do not match\n");
}
securid_encode_token(t, pass, NULL, buf);
rc = write_token_and_pin(buf, len ? pin : NULL, pass);
free(pass);
if (rc != ERR_NONE)
die("error: can't set PIN: %s\n", stoken_errstr[rc]);
} else if (!strcmp(cmd, "setpass")) {
char pass[BUFLEN];
unlock_token(t, 0, NULL);
request_new_pass(pass);
securid_encode_token(t, pass, NULL, buf);
/* just print to stdout if it didn't come from the rcfile */
if (opt_file || opt_token)
print_formatted(buf);
else {
rc = write_token_and_pin(buf,
strlen(t->pin) ? t->pin : NULL,
strlen(pass) ? pass : NULL);
if (rc != ERR_NONE)
die("error: can't set password: %s\n",
stoken_errstr[rc]);
}
} else
die("error: invalid command '%s'\n", cmd);
return 0;
}
int main P2C(int,ac,char**,av)
#line 95 "./cwebdir/ctangle.w"
{
argc= ac;argv= av;
program= ctangle;
/*17:*/
#line 167 "./cwebdir/ctangle.w"
text_info->tok_start= tok_ptr= tok_mem;
text_ptr= text_info+1;text_ptr->tok_start= tok_mem;
/*:17*//*19:*/
#line 177 "./cwebdir/ctangle.w"
name_dir->equiv= (char*)text_info;
/*:19*//*23:*/
#line 230 "./cwebdir/ctangle.w"
last_unnamed= text_info;text_info->text_link= 0;
/*:23*//*38:*/
#line 512 "./cwebdir/ctangle.w"
cur_out_file= end_output_files= output_files+max_files;
/*:38*//*51:*/
#line 713 "./cwebdir/ctangle.w"
{
int i;
for(i= 0;i<128;i++)sprintf(translit[i],"X%02X",(unsigned)(128+i));
}
/*:51*//*56:*/
#line 792 "./cwebdir/ctangle.w"
{
int c;
for(c= 0;c<256;c++)ccode[c]= ignore;
ccode[' ']= ccode['\t']= ccode['\n']= ccode['\v']= ccode['\r']= ccode['\f']
= ccode['*']= new_section;
ccode['@']= '@';ccode['=']= string;
ccode['d']= ccode['D']= definition;
ccode['f']= ccode['F']= ccode['s']= ccode['S']= format_code;
ccode['c']= ccode['C']= ccode['p']= ccode['P']= begin_C;
ccode['^']= ccode[':']= ccode['.']= ccode['t']= ccode['T']=
ccode['q']= ccode['Q']= control_text;
ccode['h']= ccode['H']= output_defs_code;
ccode['l']= ccode['L']= translit_code;
ccode['&']= join;
ccode['<']= ccode['(']= section_name;
ccode['\'']= ord;
}
/*:56*//*70:*/
#line 1116 "./cwebdir/ctangle.w"
section_text[0]= ' ';
/*:70*/
#line 98 "./cwebdir/ctangle.w"
;
common_init();
#line 76 "./cwebdir/ctang-w2c.ch"
if(show_banner){
printf("%s%s\n",banner,versionstring);
}
#line 101 "./cwebdir/ctangle.w"
phase_one();
phase_two();
return wrap_up();
}
GameAsset::GameAsset() {
common_init();
this->v_shader = "shaders/hello-gl.v.glsl";
this->f_shader = "shaders/hello-gl.f.glsl";
}
// Constructor cuando se usa HardwareSerial
GPS_5Hz::GPS_5Hz(HardwareSerial *ser) {
common_init(); // inicializa todo comunmente, y luego...
gpsHwSerial = ser; // ...se modifica gpsHwSerial con el valor pasado.
}
GameAsset::GameAsset(const string & v_shader, const string & f_shader) {
common_init();
this->v_shader = v_shader;
this->f_shader = f_shader;
}
/**
* Initialize the driver.
* \param drvthis Pointer to driver structure.
* \retval 0 Success.
* \retval -1 Error opening device.
* \retval -2 Error reading or unsupported driver version.
* \retval -3 Error reading or unsupported hardware version.
*/
int
hd_init_usblcd(Driver *drvthis)
{
PrivateData *p = (PrivateData *) drvthis->private_data;
char device[256] = DEFAULT_DEVICE;
char buf[128];
int major, minor;
/* Get device to use */
strncpy(device, drvthis->config_get_string(drvthis->name, "device", 0, DEFAULT_DEVICE), sizeof(device));
device[sizeof(device) - 1] = '\0';
report(RPT_INFO, "HD44780: USBLCD: using device: %s", device);
/* Set up io port correctly, and open it... */
p->fd = open(device, O_RDWR | O_NOCTTY | O_NDELAY);
if (p->fd == -1) {
report(RPT_ERR, "HD44780: USBLCD: could not open device %s (%s)", device, strerror(errno));
return -1;
}
/* Read and check kernel driver version */
memset(buf, 0, 128);
if (ioctl(p->fd, IOCTL_GET_DRV_VERSION, buf) != 0) {
report(RPT_ERR, "IOCTL failed, could not get Driver Version");
return -2;
}
report(RPT_INFO, "Driver Version: %s", buf);
if (sscanf(buf, "USBLCD Driver Version %d.%d", &major, &minor) != 2) {
report(RPT_ERR, "Could not read Driver Version");
return -2;
}
if (major != 1) {
report(RPT_ERR, "Driver Version not supported");
return -2;
}
/* Read and check hardware version */
memset(buf, 0, 128);
if (ioctl(p->fd, IOCTL_GET_HARD_VERSION, buf) != 0) {
report(RPT_ERR, "IOCTL failed, could not get Hardware Version");
return -3;
};
report(RPT_INFO, "Hardware Version: %s", buf);
if (sscanf(buf, "%d.%d", &major, &minor) != 2) {
report(RPT_ERR, "Could not read Hardware Version");
return -3;
};
if (major != 1) {
report(RPT_ERR, "Hardware Version not supported");
return -3;
}
/* Set local functions */
p->hd44780_functions->senddata = usblcd_HD44780_senddata;
p->hd44780_functions->backlight = usblcd_HD44780_backlight;
p->hd44780_functions->close = usblcd_HD44780_close;
common_init(p, IF_8BIT);
return 0;
}
Camera::Camera(HardwareSerial *ser) {
common_init();
hwSerial = ser;
}
static int encode_init(AVCodecContext *avctx){
common_init(avctx);
return 0;
}
// Constructor when using HardwareSerial
SPK_GPS::SPK_GPS(HardwareSerial *ser) {
common_init(); // Set everything to common state, then...
gpsHwSerial = ser; // ...override gpsHwSerial with value passed.
}
// Constructor when using HardwareSerial
Adafruit_GPS::Adafruit_GPS() {
common_init(); // Set everything to common state, then...
//gpsHwSerial = ser; // ...override gpsHwSerial with value passed.
}
void Adafruit_GPS::setup(HardwareSerial *ser) {
common_init();
gpsHwSerial = ser;
}
