FilterEffectEditWidget::FilterEffectEditWidget(QWidget *parent)
: QWidget(parent), m_scene(new FilterEffectScene(this))
, m_shape(0), m_canvas(0), m_effects(0)
{
setupUi(this);
FilterResourceServerProvider * serverProvider = FilterResourceServerProvider::instance();
KoResourceServer<FilterEffectResource> * server = serverProvider->filterEffectServer();
KoAbstractResourceServerAdapter * adapter = new KoResourceServerAdapter<FilterEffectResource>(server, this);
presets->setResourceAdapter(adapter);
presets->setDisplayMode(KoResourceSelector::TextMode);
presets->setColumnCount(1);
connect(presets, SIGNAL(resourceSelected(KoResource*)),
this, SLOT(presetSelected(KoResource*)));
connect(presets, SIGNAL(resourceApplied(KoResource*)),
this, SLOT(presetSelected(KoResource*)));
KoGenericRegistryModel<KFilterEffectFactoryBase*> * filterEffectModel = new KoGenericRegistryModel<KFilterEffectFactoryBase*>(KFilterEffectRegistry::instance());
effectSelector->setModel(filterEffectModel);
removeEffect->setIcon(KIcon("list-remove"));
connect(removeEffect, SIGNAL(clicked()), this, SLOT(removeSelectedItem()));
addEffect->setIcon(KIcon("list-add"));
addEffect->setToolTip(i18n("Add effect to current filter stack"));
connect(addEffect, SIGNAL(clicked()), this, SLOT(addSelectedEffect()));
raiseEffect->setIcon(KIcon("arrow-up"));
lowerEffect->setIcon(KIcon("arrow-down"));
addPreset->setIcon(KIcon("list-add"));
addPreset->setToolTip(i18n("Add to filter presets"));
connect(addPreset, SIGNAL(clicked()), this, SLOT(addToPresets()));
removePreset->setIcon(KIcon("list-remove"));
removePreset->setToolTip(i18n("Remove filter preset"));
view->setScene(m_scene);
view->setRenderHint(QPainter::Antialiasing, true);
view->setResizeAnchor(QGraphicsView::AnchorViewCenter);
connect(m_scene, SIGNAL(connectionCreated(ConnectionSource,ConnectionTarget)),
this, SLOT(connectionCreated(ConnectionSource,ConnectionTarget)));
connect(m_scene, SIGNAL(selectionChanged()), this, SLOT(sceneSelectionChanged()));
QSet<ConnectionSource::SourceType> inputs;
inputs << ConnectionSource::SourceGraphic;
inputs << ConnectionSource::SourceAlpha;
inputs << ConnectionSource::BackgroundImage;
inputs << ConnectionSource::BackgroundAlpha;
inputs << ConnectionSource::FillPaint;
inputs << ConnectionSource::StrokePaint;
m_defaultSourceSelector = new KComboBox(this);
foreach(ConnectionSource::SourceType source, inputs) {
m_defaultSourceSelector->addItem(ConnectionSource::typeToString(source));
}
Stream* Hub::connect(const std::string &target)
{
std::string proto, params;
size_t c = target.find_first_of(':');
if (c == std::string::npos)
throw DashelException(DashelException::InvalidTarget, 0, "No protocol specified in target.");
proto = target.substr(0, c);
params = target.substr(c+1);
SelectableStream *s(dynamic_cast<SelectableStream*>(streamTypeRegistry.create(proto, target, *this)));
if(!s)
{
std::string r = "Invalid protocol in target: ";
r += proto;
r += ", known protocol are: ";
r += streamTypeRegistry.list();
throw DashelException(DashelException::InvalidTarget, 0, r.c_str());
}
/* The caller must have the stream lock held */
streams.insert(s);
if (proto != "tcpin")
{
dataStreams.insert(s);
connectionCreated(s);
}
return s;
}
void ClientConnectionManager::incomingConnection()
{
QTcpSocket * connection;
while((connection = mServer.nextPendingConnection()) != nullptr)
{
mSockets.append(connection);
mRequestMan.addWatchList(connection);
QString socket_id = QString::number(int(connection->socketDescriptor()));
emit connectionCreated(socket_id);
connect(connection,SIGNAL(disconnected()),this,SLOT(socketDisconnected()));
connect(connection,
SIGNAL(error(QAbstractSocket::SocketError)),
this,
SLOT(connectionErrorOccured(QAbstractSocket::SocketError)));
connect(connection,
SIGNAL(stateChanged(QAbstractSocket::SocketState)),
this,
SLOT(connectionStateChanged(QAbstractSocket::SocketState)));
}
}
void MpuReader::run()
{
//連線藍芽
#ifndef USE_WIRE_CONNECTION
blue_connector = new cwz_c_blue();
int result = blue_connector->connect(this->stopFlag);
if(result == 1)//如果成功連線
emit connectionCreated();
#endif
//********************************************************//
// 變數宣告
//********************************************************//
//Handle Serial Buffer
const int incomming_buf_len = 2048;
char incomingData[incomming_buf_len] = ""; // don't forget to pre-allocate memory
int dataLength = 256;
const int bSize = 10000;
char buffer[bSize] = "";
int bLen = 0;
//Decode information from buffer string
int count = 0;
int flag = -1; //-1等於上次是不合法結束的情況
int accl[3]; // x, y, z
int gyro[3]; // x, y, z
float gravity[3];
float quatern[4];
int buttons[2];
int period;
//中位值濾波
int MFLen = 5; //濾波器長度為5
int **Accls = allcIntDArray(MFLen, 3);
int **Gyros = allcIntDArray(MFLen, 3);
int MFCount = 0; // 只用於前五次, 確認filter的data set是不是被裝滿了, 裝滿了才開始濾波
//Symbol record
//SymbolRecorder SR = SymbolRecorder();
//fileNameSStream << racketFilePath << date_string << "_" << type_string << "_" << person_string << "_" << racket_file_count << ".txt";
//********************************************************//
// 連接Com port並確認連線
//********************************************************//
#ifdef USE_WIRE_CONNECTION
std::cout << "Arduino with GY521 board and chip MPU6050!" << std::endl;
char *COM_NUM = "COM5";
Serial* SP = new Serial(COM_NUM); // adjust as needed
if (SP->IsConnected()){
emit connectionCreated();
std::cout << "We're connected" << std::endl;
}else{
stopFlag = true;
}
//read few set of data until it's getting stable
waitUntilSerialStable(SP, incomingData, dataLength);
std::cout << "Data should be stable, start to read MPU6050" << std::endl;
#else
blue_connector->send("Start to read mpu6050 data from bluetooth.\n");
#endif
while(!stopFlag){
#ifdef USE_WIRE_CONNECTION
if(!SP->IsConnected()){
std::cout << "Failed to read " << COM_NUM << " Mpu6050 reader is off." << std::endl;
emit readingEnded();
break;
}
if( !readSerialIntoBuffer(SP, incomingData, dataLength, readResult, bLen, bSize, buffer) )
continue;//If no valid serial data are read or buffer overflow, skip this round
#else
dataLength = blue_connector->receive(incomingData, incomming_buf_len);
if(dataLength > 0){//有收到東西
incomingData[dataLength] = '\0';
strcpy_s(&buffer[bLen], bSize, incomingData);
bLen += dataLength;
}
#endif
//decode mpu6050 data from buffer str, take off processed part from buffer
strcpy_s(buffer, bSize, getAccelAndGyro(&count, &flag, &bLen, buffer, accl, gyro, quatern, buttons, &period, bSize));
// 每一組合法數值為 (acclX,acclY,acclZ,gyroX,gyroY,gyroZ,quatern1,quatern2,quatern3,quatern4,buttonRight,buttonLeft,readperiod)
if( flag != GETAANDG_NEW_VALID_DATA )
continue;//尚未讀到整組完整資料 不處理 繼續讀
SHORT downKeyState = GetAsyncKeyState( VK_DOWN );
//std::cout << "gravity: " << gravity[0] << ", " << gravity[1] << ", " << gravity[2] << std::endl;
if( writeRawToFile )
{//按ctrl鍵
std::cout << "period: " << period << std::endl;
if( ( 1 << 16 ) & downKeyState ){
//writeAcclAndGyroAndGravity(fileNameSStream.str().c_str(), accl, gyro, gravity, 1);
writeMpu6050RawToFile(fileNameSStream.str().c_str(), accl, gyro, quatern, period, 1);
//std::cout << "Down Key State: " << 1 << std::endl;
}else{
//writeAcclAndGyroAndGravity(fileNameSStream.str().c_str(), accl, gyro, gravity, 0);
writeMpu6050RawToFile(fileNameSStream.str().c_str(), accl, gyro, quatern, period, 0);
//std::cout << "Down Key State: " << 0 << std::endl;
}
}
//********************************************************//
// 處理加速度計與陀螺儀Raw Data
//********************************************************//
//get gravity
QtoGravity(quatern, gravity);
//std::cout << "Gyro: " << gyro[0] << "," << gyro[1] << "," << gyro[2] << std::endl;
//去重力
removeGravity(accl, gravity);
double total_q = sqrt(gravity[0]*gravity[0] + gravity[1]*gravity[1] + gravity[2]*gravity[2]);
this->my_glwidget->setNewZ(gravity[0], gravity[1], gravity[2]);
//check if gravity value is invalid
if( total_q >= 1.1 ){
std::cout << "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!" << std::endl;
std::cout << "total_q: " << total_q << std::endl;
std::cout << "Wrong gravity ............................................" << std::endl;
std::cout << "quatern: " << quatern[0] << "," << quatern[1] << "," << quatern[2] << "," << quatern[3] << std::endl;
std::cout << "gravity: " << gravity[0] << "," << gravity[1] << "," << gravity[2] << std::endl;
std::cout << "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!" << std::endl;
system("PAUSE");
}
//Median Filter(中位值濾波)
agMedianFilter(Accls, Gyros, accl, gyro, MFCount, MFLen, true, true); //是否做濾波 accl=true gyro=true
}
#ifdef USE_WIRE_CONNECTION
SP->~Serial();
#else
blue_connector->disconnect();
#endif
//釋放中位值濾波使用的記憶體空間
freeIntDArray(Accls, MFLen);
freeIntDArray(Gyros, MFLen);
}