void KoPathPoint::paint(QPainter &painter, int handleRadius, PointTypes types, bool active)
{
QRectF handle(-handleRadius, -handleRadius, 2*handleRadius, 2*handleRadius);
bool drawControlPoint1 = types & ControlPoint1 && (!active || activeControlPoint1());
bool drawControlPoint2 = types & ControlPoint2 && (!active || activeControlPoint2());
// draw lines at the bottom
if (drawControlPoint2)
painter.drawLine(point(), controlPoint2());
if (drawControlPoint1)
painter.drawLine(point(), controlPoint1());
QTransform worldMatrix = painter.worldTransform();
painter.setWorldTransform(QTransform());
// the point is lowest
if (types & Node) {
if (properties() & IsSmooth)
painter.drawRect(handle.translated(worldMatrix.map(point())));
else if (properties() & IsSymmetric) {
QTransform matrix;
matrix.rotate(45.0);
QPolygonF poly(handle);
poly = matrix.map(poly);
poly.translate(worldMatrix.map(point()));
painter.drawPolygon(poly);
} else
painter.drawEllipse(handle.translated(worldMatrix.map(point())));
}
// then comes control point 2
if (drawControlPoint2)
painter.drawEllipse(handle.translated(worldMatrix.map(controlPoint2())));
// then comes control point 1
if (drawControlPoint1)
painter.drawEllipse(handle.translated(worldMatrix.map(controlPoint1())));
painter.setWorldTransform(worldMatrix);
}
bool KoPathPoint::isSmooth(KoPathPoint * prev, KoPathPoint * next) const
{
QPointF t1, t2;
if (activeControlPoint1()) {
t1 = point() - controlPoint1();
} else {
// we need the previous path point but there is none provided
if (! prev)
return false;
if (prev->activeControlPoint2())
t1 = point() - prev->controlPoint2();
else
t1 = point() - prev->point();
}
if (activeControlPoint2()) {
t2 = controlPoint2() - point();
} else {
// we need the next path point but there is none provided
if (! next)
return false;
if (next->activeControlPoint1())
t2 = next->controlPoint1() - point();
else
t2 = next->point() - point();
}
// normalize tangent vectors
qreal l1 = sqrt(t1.x() * t1.x() + t1.y() * t1.y());
qreal l2 = sqrt(t2.x() * t2.x() + t2.y() * t2.y());
if (qFuzzyCompare(l1 + 1, qreal(1.0)) || qFuzzyCompare(l2 + 1, qreal(1.0)))
return true;
t1 /= l1;
t2 /= l2;
qreal scalar = t1.x() * t2.x() + t1.y() * t2.y();
// tangents are parallel if t1*t2 = |t1|*|t2|
return qFuzzyCompare(scalar, qreal(1.0));
}
static ofTTFCharacter makeContoursForCharacter(FT_Face &face){
//int num = face->glyph->outline.n_points;
int nContours = face->glyph->outline.n_contours;
int startPos = 0;
char * tags = face->glyph->outline.tags;
FT_Vector * vec = face->glyph->outline.points;
ofTTFCharacter charOutlines;
charOutlines.setUseShapeColor(false);
for(int k = 0; k < nContours; k++){
if( k > 0 ){
startPos = face->glyph->outline.contours[k-1]+1;
}
int endPos = face->glyph->outline.contours[k]+1;
if(printVectorInfo){
ofLogNotice("ofTrueTypeFont") << "--NEW CONTOUR";
}
//vector <ofPoint> testOutline;
ofPoint lastPoint;
for(int j = startPos; j < endPos; j++){
if( FT_CURVE_TAG(tags[j]) == FT_CURVE_TAG_ON ){
lastPoint.set((float)vec[j].x, (float)-vec[j].y, 0);
if(printVectorInfo){
ofLogNotice("ofTrueTypeFont") << "flag[" << j << "] is set to 1 - regular point - " << lastPoint.x << lastPoint.y;
}
charOutlines.lineTo(lastPoint/64);
}else{
if(printVectorInfo){
ofLogNotice("ofTrueTypeFont") << "flag[" << j << "] is set to 0 - control point";
}
if( FT_CURVE_TAG(tags[j]) == FT_CURVE_TAG_CUBIC ){
if(printVectorInfo){
ofLogNotice("ofTrueTypeFont") << "- bit 2 is set to 2 - CUBIC";
}
int prevPoint = j-1;
if( j == 0){
prevPoint = endPos-1;
}
int nextIndex = j+1;
if( nextIndex >= endPos){
nextIndex = startPos;
}
ofPoint nextPoint( (float)vec[nextIndex].x, -(float)vec[nextIndex].y );
//we need two control points to draw a cubic bezier
bool lastPointCubic = ( FT_CURVE_TAG(tags[prevPoint]) != FT_CURVE_TAG_ON ) && ( FT_CURVE_TAG(tags[prevPoint]) == FT_CURVE_TAG_CUBIC);
if( lastPointCubic ){
ofPoint controlPoint1((float)vec[prevPoint].x, (float)-vec[prevPoint].y);
ofPoint controlPoint2((float)vec[j].x, (float)-vec[j].y);
ofPoint nextPoint((float) vec[nextIndex].x, -(float) vec[nextIndex].y);
//cubic_bezier(testOutline, lastPoint.x, lastPoint.y, controlPoint1.x, controlPoint1.y, controlPoint2.x, controlPoint2.y, nextPoint.x, nextPoint.y, 8);
charOutlines.bezierTo(controlPoint1.x/64, controlPoint1.y/64, controlPoint2.x/64, controlPoint2.y/64, nextPoint.x/64, nextPoint.y/64);
}
}else{
ofPoint conicPoint( (float)vec[j].x, -(float)vec[j].y );
if(printVectorInfo){
ofLogNotice("ofTrueTypeFont") << "- bit 2 is set to 0 - conic- ";
ofLogNotice("ofTrueTypeFont") << "--- conicPoint point is " << conicPoint.x << conicPoint.y;
}
//If the first point is connic and the last point is connic then we need to create a virutal point which acts as a wrap around
if( j == startPos ){
bool prevIsConnic = ( FT_CURVE_TAG( tags[endPos-1] ) != FT_CURVE_TAG_ON ) && ( FT_CURVE_TAG( tags[endPos-1]) != FT_CURVE_TAG_CUBIC );
if( prevIsConnic ){
ofPoint lastConnic((float)vec[endPos - 1].x, (float)-vec[endPos - 1].y);
lastPoint = (conicPoint + lastConnic) / 2;
if(printVectorInfo){
ofLogNotice("ofTrueTypeFont") << "NEED TO MIX WITH LAST";
ofLogNotice("ofTrueTypeFont") << "last is " << lastPoint.x << " " << lastPoint.y;
}
}
}
//bool doubleConic = false;
int nextIndex = j+1;
if( nextIndex >= endPos){
nextIndex = startPos;
}
ofPoint nextPoint( (float)vec[nextIndex].x, -(float)vec[nextIndex].y );
if(printVectorInfo){
ofLogNotice("ofTrueTypeFont") << "--- last point is " << lastPoint.x << " " << lastPoint.y;
}
bool nextIsConnic = ( FT_CURVE_TAG( tags[nextIndex] ) != FT_CURVE_TAG_ON ) && ( FT_CURVE_TAG( tags[nextIndex]) != FT_CURVE_TAG_CUBIC );
//create a 'virtual on point' if we have two connic points
if( nextIsConnic ){
nextPoint = (conicPoint + nextPoint) / 2;
if(printVectorInfo){
ofLogNotice("ofTrueTypeFont") << "|_______ double connic!";
}
}
if(printVectorInfo){
ofLogNotice("ofTrueTypeFont") << "--- next point is " << nextPoint.x << " " << nextPoint.y;
}
//quad_bezier(testOutline, lastPoint.x, lastPoint.y, conicPoint.x, conicPoint.y, nextPoint.x, nextPoint.y, 8);
charOutlines.quadBezierTo(lastPoint.x/64, lastPoint.y/64, conicPoint.x/64, conicPoint.y/64, nextPoint.x/64, nextPoint.y/64);
if( nextIsConnic ){
lastPoint = nextPoint;
}
}
}
//end for
}
charOutlines.close();
}
return charOutlines;
}
static ofTTFCharacter makeContoursForCharacter(FT_Face &face){
//int num = face->glyph->outline.n_points;
int nContours = face->glyph->outline.n_contours;
int startPos = 0;
char * tags = face->glyph->outline.tags;
FT_Vector * vec = face->glyph->outline.points;
ofTTFCharacter charOutlines;
for(int k = 0; k < nContours; k++){
if( k > 0 ){
startPos = face->glyph->outline.contours[k-1]+1;
}
int endPos = face->glyph->outline.contours[k]+1;
if( printVectorInfo )printf("--NEW CONTOUR\n\n");
vector <ofPoint> testOutline;
ofPoint lastPoint;
for(int j = startPos; j < endPos; j++){
if( FT_CURVE_TAG(tags[j]) == FT_CURVE_TAG_ON ){
lastPoint.set((float)vec[j].x, (float)-vec[j].y, 0);
if( printVectorInfo )printf("flag[%i] is set to 1 - regular point - %f %f \n", j, lastPoint.x, lastPoint.y);
testOutline.push_back(lastPoint);
}else{
if( printVectorInfo )printf("flag[%i] is set to 0 - control point \n", j);
if( FT_CURVE_TAG(tags[j]) == FT_CURVE_TAG_CUBIC ){
if( printVectorInfo )printf("- bit 2 is set to 2 - CUBIC\n");
int prevPoint = j-1;
if( j == 0){
prevPoint = endPos-1;
}
int nextIndex = j+1;
if( nextIndex >= endPos){
nextIndex = startPos;
}
ofPoint nextPoint( (float)vec[nextIndex].x, -(float)vec[nextIndex].y );
//we need two control points to draw a cubic bezier
bool lastPointCubic = ( FT_CURVE_TAG(tags[prevPoint]) != FT_CURVE_TAG_ON ) && ( FT_CURVE_TAG(tags[prevPoint]) == FT_CURVE_TAG_CUBIC);
if( lastPointCubic ){
ofPoint controlPoint1((float)vec[prevPoint].x, (float)-vec[prevPoint].y);
ofPoint controlPoint2((float)vec[j].x, (float)-vec[j].y);
ofPoint nextPoint((float) vec[nextIndex].x, -(float) vec[nextIndex].y);
cubic_bezier(testOutline, lastPoint.x, lastPoint.y, controlPoint1.x, controlPoint1.y, controlPoint2.x, controlPoint2.y, nextPoint.x, nextPoint.y, 8);
}
}else{
ofPoint conicPoint( (float)vec[j].x, -(float)vec[j].y );
if( printVectorInfo )printf("- bit 2 is set to 0 - conic- \n");
if( printVectorInfo )printf("--- conicPoint point is %f %f \n", conicPoint.x, conicPoint.y);
//If the first point is connic and the last point is connic then we need to create a virutal point which acts as a wrap around
if( j == startPos ){
bool prevIsConnic = ( FT_CURVE_TAG( tags[endPos-1] ) != FT_CURVE_TAG_ON ) && ( FT_CURVE_TAG( tags[endPos-1]) != FT_CURVE_TAG_CUBIC );
if( prevIsConnic ){
ofPoint lastConnic((float)vec[endPos - 1].x, (float)-vec[endPos - 1].y);
lastPoint = (conicPoint + lastConnic) / 2;
if( printVectorInfo ) printf("NEED TO MIX WITH LAST\n");
if( printVectorInfo )printf("last is %f %f \n", lastPoint.x, lastPoint.y);
}
}
//bool doubleConic = false;
int nextIndex = j+1;
if( nextIndex >= endPos){
nextIndex = startPos;
}
ofPoint nextPoint( (float)vec[nextIndex].x, -(float)vec[nextIndex].y );
if( printVectorInfo )printf("--- last point is %f %f \n", lastPoint.x, lastPoint.y);
bool nextIsConnic = ( FT_CURVE_TAG( tags[nextIndex] ) != FT_CURVE_TAG_ON ) && ( FT_CURVE_TAG( tags[nextIndex]) != FT_CURVE_TAG_CUBIC );
//create a 'virtual on point' if we have two connic points
if( nextIsConnic ){
nextPoint = (conicPoint + nextPoint) / 2;
if( printVectorInfo )printf("|_______ double connic!\n");
}
if( printVectorInfo )printf("--- next point is %f %f \n", nextPoint.x, nextPoint.y);
quad_bezier(testOutline, lastPoint.x, lastPoint.y, conicPoint.x, conicPoint.y, nextPoint.x, nextPoint.y, 8);
if( nextIsConnic ){
lastPoint = nextPoint;
}
}
}
//end for
}
for(int g =0; g < (int)testOutline.size(); g++){
testOutline[g] /= 64.0f;
}
charOutlines.contours.push_back(ofTTFContour());
if( testOutline.size() ){
charOutlines.contours.back().pts = ofSimplifyContour(testOutline, (float)TTF_SHAPE_SIMPLIFICATION_AMNT);
}else{
charOutlines.contours.back().pts = testOutline;
}
}
return charOutlines;
}
/*
* Draw one cubic Bezier curve and repeat the same pattern long the the decoration's axis.
* The start point (p1), controlPoint1, controlPoint2 and end point (p2) of the Bezier curve
* form a diamond shape:
*
* step
* |-----------|
*
* controlPoint1
* +
*
*
* . .
* . .
* . .
* (x1, y1) p1 + . + p2 (x2, y2) - <--- Decoration's axis
* . . |
* . . |
* . . | controlPointDistance
* |
* |
* + -
* controlPoint2
*
* |-----------|
* step
*/
static void strokeWavyTextDecoration(GraphicsContext& context, const FloatPoint& start, const FloatPoint& end, float strokeThickness)
{
FloatPoint p1 = start;
FloatPoint p2 = end;
context.adjustLineToPixelBoundaries(p1, p2, strokeThickness, context.strokeStyle());
Path path;
path.moveTo(p1);
float controlPointDistance;
float step;
getWavyStrokeParameters(strokeThickness, controlPointDistance, step);
bool isVerticalLine = (p1.x() == p2.x());
if (isVerticalLine) {
ASSERT(p1.x() == p2.x());
float xAxis = p1.x();
float y1;
float y2;
if (p1.y() < p2.y()) {
y1 = p1.y();
y2 = p2.y();
} else {
y1 = p2.y();
y2 = p1.y();
}
adjustStepToDecorationLength(step, controlPointDistance, y2 - y1);
FloatPoint controlPoint1(xAxis + controlPointDistance, 0);
FloatPoint controlPoint2(xAxis - controlPointDistance, 0);
for (float y = y1; y + 2 * step <= y2;) {
controlPoint1.setY(y + step);
controlPoint2.setY(y + step);
y += 2 * step;
path.addBezierCurveTo(controlPoint1, controlPoint2, FloatPoint(xAxis, y));
}
} else {
ASSERT(p1.y() == p2.y());
float yAxis = p1.y();
float x1;
float x2;
if (p1.x() < p2.x()) {
x1 = p1.x();
x2 = p2.x();
} else {
x1 = p2.x();
x2 = p1.x();
}
adjustStepToDecorationLength(step, controlPointDistance, x2 - x1);
FloatPoint controlPoint1(0, yAxis + controlPointDistance);
FloatPoint controlPoint2(0, yAxis - controlPointDistance);
for (float x = x1; x + 2 * step <= x2;) {
controlPoint1.setX(x + step);
controlPoint2.setX(x + step);
x += 2 * step;
path.addBezierCurveTo(controlPoint1, controlPoint2, FloatPoint(x, yAxis));
}
}
context.setShouldAntialias(true);
context.strokePath(path);
}
