/**
* cppi41_channel_alloc - allocate a CPPI channel for DMA.
* @controller: the controller
* @ep: the endpoint
* @is_tx: 1 for Tx channel, 0 for Rx channel
*
* With CPPI, channels are bound to each transfer direction of a non-control
* endpoint, so allocating (and deallocating) is mostly a way to notice bad
* housekeeping on the software side. We assume the IRQs are always active.
*/
static struct dma_channel *cppi41_channel_alloc(struct dma_controller
*controller,
struct musb_hw_ep *ep, u8 is_tx)
{
struct cppi41 *cppi;
struct cppi41_channel *cppi_ch;
u32 ch_num, ep_num = ep->epnum;
struct usb_cppi41_info *cppi_info;
cppi = container_of(controller, struct cppi41, controller);
cppi_info = cppi->cppi_info;
/* Remember, ep_num: 1 .. Max_EP, and CPPI ch_num: 0 .. Max_EP - 1 */
ch_num = ep_num - 1;
if (ep_num > USB_CPPI41_NUM_CH) {
DBG(1, "No %cx DMA channel for EP%d\n",
is_tx ? 'T' : 'R', ep_num);
return NULL;
}
cppi_ch = (is_tx ? cppi->tx_cppi_ch : cppi->rx_cppi_ch) + ch_num;
/* As of now, just return the corresponding CPPI 4.1 channel handle */
if (is_tx) {
/* Initialize the CPPI 4.1 Tx DMA channel */
if (cppi41_tx_ch_init(&cppi_ch->dma_ch_obj,
cppi_info->dma_block,
cppi_info->ep_dma_ch[ch_num])) {
DBG(1, "ERROR: cppi41_tx_ch_init failed for "
"channel %d\n", ch_num);
return NULL;
}
/*
* Teardown descriptors will be pushed to the dedicated
* completion queue.
*/
cppi41_dma_ch_default_queue(&cppi_ch->dma_ch_obj,
0, cppi->teardownQNum);
} else {
struct cppi41_rx_ch_cfg rx_cfg;
u8 q_mgr = cppi_info->q_mgr;
int i;
/* Initialize the CPPI 4.1 Rx DMA channel */
if (cppi41_rx_ch_init(&cppi_ch->dma_ch_obj,
cppi_info->dma_block,
cppi_info->ep_dma_ch[ch_num])) {
DBG(1, "ERROR: cppi41_rx_ch_init failed\n");
return NULL;
}
if (cppi41_queue_alloc(CPPI41_FREE_DESC_BUF_QUEUE |
CPPI41_UNASSIGNED_QUEUE,
q_mgr, &cppi_ch->src_queue.q_num)) {
DBG(1, "ERROR: cppi41_queue_alloc failed for "
"free descriptor/buffer queue\n");
return NULL;
}
DBG(4, "Allocated free descriptor/buffer queue %d in "
"queue manager %d\n", cppi_ch->src_queue.q_num, q_mgr);
rx_cfg.default_desc_type = cppi41_rx_host_desc;
rx_cfg.sop_offset = 0;
rx_cfg.retry_starved = 1;
rx_cfg.rx_max_buf_cnt = 0;
rx_cfg.rx_queue.q_mgr = cppi_ch->src_queue.q_mgr = q_mgr;
rx_cfg.rx_queue.q_num = cppi_info->rx_comp_q[ch_num];
for (i = 0; i < 4; i++)
rx_cfg.cfg.host_pkt.fdb_queue[i] = cppi_ch->src_queue;
cppi41_rx_ch_configure(&cppi_ch->dma_ch_obj, &rx_cfg);
}
/* Initialize the CPPI 4.1 DMA source queue */
if (cppi41_queue_init(&cppi_ch->queue_obj, cppi_ch->src_queue.q_mgr,
cppi_ch->src_queue.q_num)) {
DBG(1, "ERROR: cppi41_queue_init failed for %s queue",
is_tx ? "Tx" : "Rx free descriptor/buffer");
if (is_tx == 0 &&
cppi41_queue_free(cppi_ch->src_queue.q_mgr,
cppi_ch->src_queue.q_num))
DBG(1, "ERROR: failed to free Rx descriptor/buffer "
"queue\n");
return NULL;
}
/* Enable the DMA channel */
cppi41_dma_ch_enable(&cppi_ch->dma_ch_obj);
if (cppi_ch->end_pt)
DBG(1, "Re-allocating DMA %cx channel %d (%p)\n",
is_tx ? 'T' : 'R', ch_num, cppi_ch);
cppi_ch->end_pt = ep;
cppi_ch->ch_num = ch_num;
cppi_ch->channel.status = MUSB_DMA_STATUS_FREE;
cppi_ch->channel.max_len = is_tx ?
CPPI41_TXDMA_MAXLEN : CPPI41_RXDMA_MAXLEN;
DBG(4, "Allocated DMA %cx channel %d for EP%d\n", is_tx ? 'T' : 'R',
ch_num, ep_num);
return &cppi_ch->channel;
}
int cppi41_dma_block_init(u8 dma_num, u8 q_mgr, u8 num_order,
u32 *sched_tbl, u8 tbl_size)
{
const struct cppi41_dma_block *dma_block;
unsigned num_desc, num_reg;
void *ptr;
int error, i;
u16 q_num;
u32 val;
if (dma_num >= cppi41_num_dma_block ||
q_mgr >= cppi41_num_queue_mgr ||
!tbl_size || sched_tbl == NULL)
return -EINVAL;
error = cppi41_queue_alloc(CPPI41_FREE_DESC_QUEUE |
CPPI41_UNASSIGNED_QUEUE, q_mgr, &q_num);
if (error) {
printk(KERN_ERR "ERROR: %s: Unable to allocate teardown "
"descriptor queue.\n", __func__);
return error;
}
DBG("Teardown descriptor queue %d in queue manager 0 "
"allocated\n", q_num);
/*
* Tell the hardware about the Teardown descriptor
* queue manager and queue number.
*/
dma_block = &cppi41_dma_block[dma_num];
cppi_writel((q_mgr << DMA_TD_DESC_QMGR_SHIFT) |
(q_num << DMA_TD_DESC_QNUM_SHIFT),
dma_block->global_ctrl_base +
DMA_TEARDOWN_FREE_DESC_CTRL_REG);
DBG("Teardown free descriptor control @ %p, value: %x\n",
dma_block->global_ctrl_base + DMA_TEARDOWN_FREE_DESC_CTRL_REG,
cppi_readl(dma_block->global_ctrl_base +
DMA_TEARDOWN_FREE_DESC_CTRL_REG));
num_desc = 1 << num_order;
dma_teardown[dma_num].rgn_size = num_desc *
sizeof(struct cppi41_teardown_desc);
/* Pre-allocate teardown descriptors. */
ptr = dma_alloc_coherent(NULL, dma_teardown[dma_num].rgn_size,
&dma_teardown[dma_num].phys_addr,
GFP_KERNEL | GFP_DMA);
if (ptr == NULL) {
printk(KERN_ERR "ERROR: %s: Unable to allocate teardown "
"descriptors.\n", __func__);
error = -ENOMEM;
goto free_queue;
}
dma_teardown[dma_num].virt_addr = ptr;
error = cppi41_mem_rgn_alloc(q_mgr, dma_teardown[dma_num].phys_addr, 5,
num_order, &dma_teardown[dma_num].mem_rgn);
if (error) {
printk(KERN_ERR "ERROR: %s: Unable to allocate queue manager "
"memory region for teardown descriptors.\n", __func__);
goto free_mem;
}
error = cppi41_queue_init(&dma_teardown[dma_num].queue_obj, 0, q_num);
if (error) {
printk(KERN_ERR "ERROR: %s: Unable to initialize teardown "
"free descriptor queue.\n", __func__);
goto free_rgn;
}
dma_teardown[dma_num].q_num = q_num;
dma_teardown[dma_num].q_mgr = q_mgr;
dma_teardown[dma_num].num_desc = num_desc;
/*
* Push all teardown descriptors to the free teardown queue
* for the CPPI 4.1 system.
*/
cppi41_init_teardown_queue(dma_num);
/* Initialize the DMA scheduler. */
num_reg = (tbl_size + 3) / 4;
for (i = 0; i < num_reg; i++) {
val = sched_tbl[i];
cppi_writel(val, dma_block->sched_table_base +
DMA_SCHED_TABLE_WORD_REG(i));
DBG("DMA scheduler table @ %p, value written: %x\n",
dma_block->sched_table_base + DMA_SCHED_TABLE_WORD_REG(i),
val);
}
cppi_writel((tbl_size - 1) << DMA_SCHED_LAST_ENTRY_SHIFT |
DMA_SCHED_ENABLE_MASK,
dma_block->sched_ctrl_base + DMA_SCHED_CTRL_REG);
DBG("DMA scheduler control @ %p, value: %x\n",
dma_block->sched_ctrl_base + DMA_SCHED_CTRL_REG,
cppi_readl(dma_block->sched_ctrl_base + DMA_SCHED_CTRL_REG));
return 0;
free_rgn:
cppi41_mem_rgn_free(q_mgr, dma_teardown[dma_num].mem_rgn);
free_mem:
dma_free_coherent(NULL, dma_teardown[dma_num].rgn_size,
dma_teardown[dma_num].virt_addr,
dma_teardown[dma_num].phys_addr);
free_queue:
cppi41_queue_free(q_mgr, q_num);
return error;
}
/**
* cppi41_controller_start - start DMA controller
* @controller: the controller
*
* This function initializes the CPPI 4.1 Tx/Rx channels.
*/
static int __init cppi41_controller_start(struct dma_controller *controller)
{
struct cppi41 *cppi;
struct cppi41_channel *cppi_ch;
void __iomem *reg_base;
struct usb_pkt_desc *curr_pd;
unsigned long pd_addr;
int i;
struct usb_cppi41_info *cppi_info;
cppi = container_of(controller, struct cppi41, controller);
cppi_info = cppi->cppi_info;
cppi->automode_reg_offs = USB_AUTOREQ_REG;
cppi->teardown_reg_offs = USB_TEARDOWN_REG;
/*
* TODO: We may need to check USB_CPPI41_MAX_PD here since CPPI 4.1
* requires the descriptor count to be a multiple of 2 ^ 5 (i.e. 32).
* Similarly, the descriptor size should also be a multiple of 32.
*/
/*
* Allocate free packet descriptor pool for all Tx/Rx endpoints --
* dma_alloc_coherent() will return a page aligned address, so our
* alignment requirement will be honored.
*/
cppi->bd_size = USB_CPPI41_MAX_PD * sizeof(struct usb_pkt_desc);
cppi->pd_mem = dma_alloc_coherent(cppi->musb->controller,
cppi->bd_size,
&cppi->pd_mem_phys,
GFP_KERNEL | GFP_DMA);
if (cppi->pd_mem == NULL) {
DBG(1, "ERROR: packet descriptor memory allocation failed\n");
return 0;
}
if (cppi41_mem_rgn_alloc(cppi_info->q_mgr, cppi->pd_mem_phys,
USB_CPPI41_DESC_SIZE_SHIFT,
get_count_order(USB_CPPI41_MAX_PD),
&cppi->pd_mem_rgn)) {
DBG(1, "ERROR: queue manager memory region allocation "
"failed\n");
goto free_pds;
}
/* Allocate the teardown completion queue */
if (cppi41_queue_alloc(CPPI41_UNASSIGNED_QUEUE,
0, &cppi->teardownQNum)) {
DBG(1, "ERROR: teardown completion queue allocation failed\n");
goto free_mem_rgn;
}
DBG(4, "Allocated teardown completion queue %d in queue manager 0\n",
cppi->teardownQNum);
if (cppi41_queue_init(&cppi->queue_obj, 0, cppi->teardownQNum)) {
DBG(1, "ERROR: teardown completion queue initialization "
"failed\n");
goto free_queue;
}
/*
* "Slice" PDs one-by-one from the big chunk and
* add them to the free pool.
*/
curr_pd = (struct usb_pkt_desc *)cppi->pd_mem;
pd_addr = cppi->pd_mem_phys;
for (i = 0; i < USB_CPPI41_MAX_PD; i++) {
curr_pd->dma_addr = pd_addr;
usb_put_free_pd(cppi, curr_pd);
curr_pd = (struct usb_pkt_desc *)((char *)curr_pd +
USB_CPPI41_DESC_ALIGN);
pd_addr += USB_CPPI41_DESC_ALIGN;
}
/* Configure the Tx channels */
for (i = 0, cppi_ch = cppi->tx_cppi_ch;
i < ARRAY_SIZE(cppi->tx_cppi_ch); ++i, ++cppi_ch) {
const struct cppi41_tx_ch *tx_info;
memset(cppi_ch, 0, sizeof(struct cppi41_channel));
cppi_ch->transmit = 1;
cppi_ch->ch_num = i;
cppi_ch->channel.private_data = cppi;
/*
* Extract the CPPI 4.1 DMA Tx channel configuration and
* construct/store the Tx PD tag info field for later use...
*/
tx_info = cppi41_dma_block[cppi_info->dma_block].tx_ch_info
+ cppi_info->ep_dma_ch[i];
cppi_ch->src_queue = tx_info->tx_queue[0];
cppi_ch->tag_info = (tx_info->port_num <<
CPPI41_SRC_TAG_PORT_NUM_SHIFT) |
(tx_info->ch_num <<
CPPI41_SRC_TAG_CH_NUM_SHIFT) |
(tx_info->sub_ch_num <<
CPPI41_SRC_TAG_SUB_CH_NUM_SHIFT);
}
/* Configure the Rx channels */
for (i = 0, cppi_ch = cppi->rx_cppi_ch;
i < ARRAY_SIZE(cppi->rx_cppi_ch); ++i, ++cppi_ch) {
memset(cppi_ch, 0, sizeof(struct cppi41_channel));
cppi_ch->ch_num = i;
cppi_ch->channel.private_data = cppi;
}
/* Construct/store Tx PD packet info field for later use */
cppi->pkt_info = (CPPI41_PKT_TYPE_USB << CPPI41_PKT_TYPE_SHIFT) |
(CPPI41_RETURN_LINKED << CPPI41_RETURN_POLICY_SHIFT);
/* Do necessary configuartion in hardware to get started */
reg_base = cppi->musb->ctrl_base;
/* Disable auto request mode */
musb_writel(reg_base, cppi->automode_reg_offs, 0);
/* Disable the CDC/RNDIS modes */
musb_writel(reg_base, USB_TX_MODE_REG, 0);
musb_writel(reg_base, USB_RX_MODE_REG, 0);
return 1;
free_queue:
if (cppi41_queue_free(0, cppi->teardownQNum))
DBG(1, "ERROR: failed to free teardown completion queue\n");
free_mem_rgn:
if (cppi41_mem_rgn_free(cppi_info->q_mgr, cppi->pd_mem_rgn))
DBG(1, "ERROR: failed to free queue manager memory region\n");
free_pds:
dma_free_coherent(cppi->musb->controller,
cppi->bd_size,
cppi->pd_mem, cppi->pd_mem_phys);
return 0;
}
