void BenchmarkDemo::initPhysics()
{
setCameraDistance(btScalar(100.));
///collision configuration contains default setup for memory, collision setup
btDefaultCollisionConstructionInfo cci;
cci.m_defaultMaxPersistentManifoldPoolSize = 32768;
m_collisionConfiguration = new btDefaultCollisionConfiguration(cci);
///use the default collision dispatcher. For parallel processing you can use a diffent dispatcher (see Extras/BulletMultiThreaded)
m_dispatcher = new btCollisionDispatcher(m_collisionConfiguration);
m_dispatcher->setDispatcherFlags(btCollisionDispatcher::CD_DISABLE_CONTACTPOOL_DYNAMIC_ALLOCATION);
#if USE_PARALLEL_DISPATCHER_BENCHMARK
int maxNumOutstandingTasks = 4;
#ifdef _WIN32
Win32ThreadSupport* threadSupportCollision = new Win32ThreadSupport(Win32ThreadSupport::Win32ThreadConstructionInfo( "collision",processCollisionTask, createCollisionLocalStoreMemory,maxNumOutstandingTasks));
#elif defined (USE_PTHREADS)
PosixThreadSupport::ThreadConstructionInfo collisionConstructionInfo( "collision",processCollisionTask, createCollisionLocalStoreMemory,maxNumOutstandingTasks);
PosixThreadSupport* threadSupportCollision = new PosixThreadSupport(collisionConstructionInfo);
#endif
//SequentialThreadSupport::SequentialThreadConstructionInfo sci("spuCD", processCollisionTask, createCollisionLocalStoreMemory);
//SequentialThreadSupport* seq = new SequentialThreadSupport(sci);
m_dispatcher = new SpuGatheringCollisionDispatcher(threadSupportCollision,1,m_collisionConfiguration);
#endif
///the maximum size of the collision world. Make sure objects stay within these boundaries
///Don't make the world AABB size too large, it will harm simulation quality and performance
btVector3 worldAabbMin(-1000,-1000,-1000);
btVector3 worldAabbMax(1000,1000,1000);
btHashedOverlappingPairCache* pairCache = new btHashedOverlappingPairCache();
m_overlappingPairCache = new btAxisSweep3(worldAabbMin,worldAabbMax,3500,pairCache);
// m_overlappingPairCache = new btSimpleBroadphase();
// m_overlappingPairCache = new btDbvtBroadphase();
///the default constraint solver. For parallel processing you can use a different solver (see Extras/BulletMultiThreaded)
#ifdef USE_PARALLEL_DISPATCHER_BENCHMARK
btThreadSupportInterface* thread = createSolverThreadSupport(4);
btConstraintSolver* sol = new btParallelConstraintSolver(thread);
#else
btSequentialImpulseConstraintSolver* sol = new btSequentialImpulseConstraintSolver;
#endif //USE_PARALLEL_DISPATCHER_BENCHMARK
m_solver = sol;
btDiscreteDynamicsWorld* dynamicsWorld;
m_dynamicsWorld = dynamicsWorld = new btDiscreteDynamicsWorld(m_dispatcher,m_overlappingPairCache,m_solver,m_collisionConfiguration);
#ifdef USE_PARALLEL_DISPATCHER_BENCHMARK
dynamicsWorld->getSimulationIslandManager()->setSplitIslands(false);
#endif //USE_PARALLEL_DISPATCHER_BENCHMARK
///the following 3 lines increase the performance dramatically, with a little bit of loss of quality
m_dynamicsWorld->getSolverInfo().m_solverMode |=SOLVER_ENABLE_FRICTION_DIRECTION_CACHING; //don't recalculate friction values each frame
dynamicsWorld->getSolverInfo().m_numIterations = 5; //few solver iterations
m_defaultContactProcessingThreshold = 0.f;//used when creating bodies: body->setContactProcessingThreshold(...);
m_dynamicsWorld->setGravity(btVector3(0,-10,0));
if (m_benchmark<5)
{
///create a few basic rigid bodies
btCollisionShape* groundShape = new btBoxShape(btVector3(btScalar(250.),btScalar(50.),btScalar(250.)));
// btCollisionShape* groundShape = new btStaticPlaneShape(btVector3(0,1,0),0);
m_collisionShapes.push_back(groundShape);
btTransform groundTransform;
groundTransform.setIdentity();
groundTransform.setOrigin(btVector3(0,-50,0));
//We can also use DemoApplication::localCreateRigidBody, but for clarity it is provided here:
{
btScalar mass(0.);
//rigidbody is dynamic if and only if mass is non zero, otherwise static
bool isDynamic = (mass != 0.f);
btVector3 localInertia(0,0,0);
if (isDynamic)
groundShape->calculateLocalInertia(mass,localInertia);
//using motionstate is recommended, it provides interpolation capabilities, and only synchronizes 'active' objects
btDefaultMotionState* myMotionState = new btDefaultMotionState(groundTransform);
btRigidBody::btRigidBodyConstructionInfo rbInfo(mass,myMotionState,groundShape,localInertia);
btRigidBody* body = new btRigidBody(rbInfo);
//add the body to the dynamics world
m_dynamicsWorld->addRigidBody(body);
}
}
switch (m_benchmark)
{
case 1:
{
createTest1();
break;
}
case 2:
{
createTest2();
break;
}
case 3:
{
createTest3();
break;
}
case 4:
{
createTest4();
break;
}
case 5:
{
createTest5();
break;
}
case 6:
{
createTest6();
break;
}
case 7:
{
createTest7();
break;
}
default:
{
}
}
clientResetScene();
}
DynamicsWorld::DynamicsWorld()
{
m_threadSupportSolver = 0;
m_threadSupportCollision = 0;
int maxNumOutstandingTasks = std::thread::hardware_concurrency();
if (maxNumOutstandingTasks == 0)
maxNumOutstandingTasks = 4;
Debug::Log("Hardware Concurrency: " + std::to_string(std::thread::hardware_concurrency()));
#ifdef SEQUENTIAL
SequentialThreadSupport::SequentialThreadConstructionInfo colCI("collision", processCollisionTask, createCollisionLocalStoreMemory);
m_threadSupportCollision = new SequentialThreadSupport(colCI);
#else
m_threadSupportCollision = new Win32ThreadSupport(Win32ThreadSupport::Win32ThreadConstructionInfo(
"collision",
processCollisionTask,
createCollisionLocalStoreMemory,
maxNumOutstandingTasks));
#endif
///collision configuration contains default setup for memory, collision setup. Advanced users can create their own configuration.
btDefaultCollisionConstructionInfo cci;
cci.m_defaultMaxPersistentManifoldPoolSize = 32768;
collisionConfiguration = new btSoftBodyRigidBodyCollisionConfiguration(cci);
///use the default collision dispatcher. For parallel processing you can use a diffent dispatcher (see Extras/BulletMultiThreaded)
//dispatcher = new btCollisionDispatcher(collisionConfiguration);
dispatcher = new SpuGatheringCollisionDispatcher(m_threadSupportCollision, maxNumOutstandingTasks, collisionConfiguration);
softBodyWorldInfo.m_dispatcher = dispatcher;
///btDbvtBroadphase is a good general purpose broadphase. You can also try out btAxis3Sweep.
overlappingPairCache = new btDbvtBroadphase();
softBodyWorldInfo.m_broadphase = overlappingPairCache;
///the default constraint solver. For parallel processing you can use a different solver (see Extras/BulletMultiThreaded)
//solver = new btSequentialImpulseConstraintSolver;
#ifdef SEQUENTIAL
solver = new btSequentialImpulseConstraintSolver();
#else
m_threadSupportSolver = createSolverThreadSupport(maxNumOutstandingTasks);
solver = new btParallelConstraintSolver(m_threadSupportSolver);
//this solver requires the contacts to be in a contiguous pool, so avoid dynamic allocation
dispatcher->setDispatcherFlags(btCollisionDispatcher::CD_DISABLE_CONTACTPOOL_DYNAMIC_ALLOCATION);
#endif
dynamicsWorld = new btSoftRigidDynamicsWorld(dispatcher, overlappingPairCache, solver, collisionConfiguration); // , softBodySolver);
dynamicsWorld->getSimulationIslandManager()->setSplitIslands(false);
dynamicsWorld->getSolverInfo().m_numIterations = 4;
dynamicsWorld->getSolverInfo().m_solverMode = SOLVER_SIMD + SOLVER_USE_WARMSTARTING;//+SOLVER_RANDMIZE_ORDER;
dynamicsWorld->getDispatchInfo().m_enableSPU = true;
dynamicsWorld->setGravity(btVector3(0,-9.8f,0));
softBodyWorldInfo.m_gravity.setValue(0, -9.8f, 0);
softBodyWorldInfo.m_sparsesdf.Initialize();
}
void jmePhysicsSpace::createPhysicsSpace(jfloat minX, jfloat minY, jfloat minZ, jfloat maxX, jfloat maxY, jfloat maxZ, jint broadphaseId, jboolean threading) {
// collision configuration contains default setup for memory, collision setup
btDefaultCollisionConstructionInfo cci;
// if(threading){
// cci.m_defaultMaxPersistentManifoldPoolSize = 32768;
// }
collisionConfiguration = new btDefaultCollisionConfiguration(cci);
btVector3 min = btVector3(minX, minY, minZ);
btVector3 max = btVector3(maxX, maxY, maxZ);
// btBroadphaseInterface* broadphase;
switch (broadphaseId) {
case 0:
broadphase = new btSimpleBroadphase();
break;
case 1:
broadphase = new btAxisSweep3(min, max);
break;
case 2:
//TODO: 32bit!
broadphase = new btAxisSweep3(min, max);
break;
case 3:
broadphase = new btDbvtBroadphase();
break;
case 4:
// broadphase = new btGpu3DGridBroadphase(
// min, max,
// 20, 20, 20,
// 10000, 1000, 25);
break;
}
// btCollisionDispatcher* dispatcher;
// btConstraintSolver* solver;
// use the default collision dispatcher. For parallel processing you can use a diffent dispatcher (see Extras/BulletMultiThreaded)
if (threading) {
btThreadSupportInterface* dispatchThreads = createDispatchThreadSupport(4);
dispatcher = new SpuGatheringCollisionDispatcher(dispatchThreads, 4, collisionConfiguration);
dispatcher->setDispatcherFlags(btCollisionDispatcher::CD_DISABLE_CONTACTPOOL_DYNAMIC_ALLOCATION);
} else {
dispatcher = new btCollisionDispatcher(collisionConfiguration);
}
// the default constraint solver. For parallel processing you can use a different solver (see Extras/BulletMultiThreaded)
if (threading) {
btThreadSupportInterface* solverThreads = createSolverThreadSupport(4);
solver = new btParallelConstraintSolver(solverThreads);
} else {
solver = new btSequentialImpulseConstraintSolver;
}
//create dynamics world
btDiscreteDynamicsWorld* world = new btDiscreteDynamicsWorld(dispatcher, broadphase, solver, collisionConfiguration);
dynamicsWorld = world;
dynamicsWorld->setWorldUserInfo(this);
//parallel solver requires the contacts to be in a contiguous pool, so avoid dynamic allocation
if (threading) {
world->getSimulationIslandManager()->setSplitIslands(false);
world->getSolverInfo().m_numIterations = 4;
world->getSolverInfo().m_solverMode = SOLVER_SIMD + SOLVER_USE_WARMSTARTING; //+SOLVER_RANDMIZE_ORDER;
world->getDispatchInfo().m_enableSPU = true;
}
ghostPairCallback = new btGhostPairCallback();
broadphase->getOverlappingPairCache()->setInternalGhostPairCallback(ghostPairCallback);
dynamicsWorld->setGravity(btVector3(0, -9.81f, 0));
struct jmeFilterCallback : public btOverlapFilterCallback {
// return true when pairs need collision
virtual bool needBroadphaseCollision(btBroadphaseProxy* proxy0, btBroadphaseProxy * proxy1) const {
// bool collides = (proxy0->m_collisionFilterGroup & proxy1->m_collisionFilterMask) != 0;
// collides = collides && (proxy1->m_collisionFilterGroup & proxy0->m_collisionFilterMask);
bool collides = (proxy0->m_collisionFilterGroup & proxy1->m_collisionFilterMask) != 0;
collides = collides && (proxy1->m_collisionFilterGroup & proxy0->m_collisionFilterMask);
if (collides) {
btCollisionObject* co0 = (btCollisionObject*)proxy0->m_clientObject;
btCollisionObject* co1 = (btCollisionObject*)proxy1->m_clientObject;
jmeUserPointer *up0 = (jmeUserPointer*)co0 -> getUserPointer();
jmeUserPointer *up1 = (jmeUserPointer*)co1 -> getUserPointer();
if (up0 != NULL && up1 != NULL) {
collides = (up0->group & up1->groups) != 0;
collides = collides && (up1->group & up0->groups);
//add some additional logic here that modified 'collides'
return collides;
}
return false;
}
return collides;
}
};
dynamicsWorld->getPairCache()->setOverlapFilterCallback(new jmeFilterCallback());
dynamicsWorld->setInternalTickCallback(&jmePhysicsSpace::preTickCallback, static_cast<void *> (this), true);
dynamicsWorld->setInternalTickCallback(&jmePhysicsSpace::postTickCallback, static_cast<void *> (this));
if (gContactProcessedCallback == NULL) {
gContactProcessedCallback = &jmePhysicsSpace::contactProcessedCallback;
}
}
