示例#1
0
文件: nrf51_soc.c 项目: bonzini/qemu
static void nrf51_soc_realize(DeviceState *dev_soc, Error **errp)
{
    NRF51State *s = NRF51_SOC(dev_soc);
    Error *err = NULL;

    if (!s->board_memory) {
        error_setg(errp, "memory property was not set");
        return;
    }

    object_property_set_link(OBJECT(&s->cpu), OBJECT(&s->container), "memory",
            &err);
    if (err) {
        error_propagate(errp, err);
        return;
    }
    object_property_set_bool(OBJECT(&s->cpu), true, "realized", &err);
    if (err) {
        error_propagate(errp, err);
        return;
    }

    memory_region_add_subregion_overlap(&s->container, 0, s->board_memory, -1);

    memory_region_init_rom(&s->flash, OBJECT(s), "nrf51.flash", s->flash_size,
            &err);
    if (err) {
        error_propagate(errp, err);
        return;
    }
    memory_region_add_subregion(&s->container, FLASH_BASE, &s->flash);

    memory_region_init_ram(&s->sram, NULL, "nrf51.sram", s->sram_size, &err);
    if (err) {
        error_propagate(errp, err);
        return;
    }
    memory_region_add_subregion(&s->container, SRAM_BASE, &s->sram);

    create_unimplemented_device("nrf51_soc.io", IOMEM_BASE, IOMEM_SIZE);
    create_unimplemented_device("nrf51_soc.ficr", FICR_BASE, FICR_SIZE);
    create_unimplemented_device("nrf51_soc.private",
                                PRIVATE_BASE, PRIVATE_SIZE);
}
示例#2
0
static void aw_a10_realize(DeviceState *dev, Error **errp)
{
    AwA10State *s = AW_A10(dev);
    SysBusDevice *sysbusdev;
    uint8_t i;
    qemu_irq fiq, irq;
    Error *err = NULL;

    object_property_set_bool(OBJECT(&s->cpu), true, "realized", &err);
    if (err != NULL) {
        error_propagate(errp, err);
        return;
    }
    irq = qdev_get_gpio_in(DEVICE(&s->cpu), ARM_CPU_IRQ);
    fiq = qdev_get_gpio_in(DEVICE(&s->cpu), ARM_CPU_FIQ);

    object_property_set_bool(OBJECT(&s->intc), true, "realized", &err);
    if (err != NULL) {
        error_propagate(errp, err);
        return;
    }
    sysbusdev = SYS_BUS_DEVICE(&s->intc);
    sysbus_mmio_map(sysbusdev, 0, AW_A10_PIC_REG_BASE);
    sysbus_connect_irq(sysbusdev, 0, irq);
    sysbus_connect_irq(sysbusdev, 1, fiq);
    for (i = 0; i < AW_A10_PIC_INT_NR; i++) {
        s->irq[i] = qdev_get_gpio_in(DEVICE(&s->intc), i);
    }

    object_property_set_bool(OBJECT(&s->timer), true, "realized", &err);
    if (err != NULL) {
        error_propagate(errp, err);
        return;
    }
    sysbusdev = SYS_BUS_DEVICE(&s->timer);
    sysbus_mmio_map(sysbusdev, 0, AW_A10_PIT_REG_BASE);
    sysbus_connect_irq(sysbusdev, 0, s->irq[22]);
    sysbus_connect_irq(sysbusdev, 1, s->irq[23]);
    sysbus_connect_irq(sysbusdev, 2, s->irq[24]);
    sysbus_connect_irq(sysbusdev, 3, s->irq[25]);
    sysbus_connect_irq(sysbusdev, 4, s->irq[67]);
    sysbus_connect_irq(sysbusdev, 5, s->irq[68]);

    memory_region_init_ram(&s->sram_a, OBJECT(dev), "sram A", 48 * KiB,
                           &error_fatal);
    memory_region_add_subregion(get_system_memory(), 0x00000000, &s->sram_a);
    create_unimplemented_device("a10-sram-ctrl", 0x01c00000, 4 * KiB);

    /* FIXME use qdev NIC properties instead of nd_table[] */
    if (nd_table[0].used) {
        qemu_check_nic_model(&nd_table[0], TYPE_AW_EMAC);
        qdev_set_nic_properties(DEVICE(&s->emac), &nd_table[0]);
    }
    object_property_set_bool(OBJECT(&s->emac), true, "realized", &err);
    if (err != NULL) {
        error_propagate(errp, err);
        return;
    }
    sysbusdev = SYS_BUS_DEVICE(&s->emac);
    sysbus_mmio_map(sysbusdev, 0, AW_A10_EMAC_BASE);
    sysbus_connect_irq(sysbusdev, 0, s->irq[55]);

    object_property_set_bool(OBJECT(&s->sata), true, "realized", &err);
    if (err) {
        error_propagate(errp, err);
        return;
    }
    sysbus_mmio_map(SYS_BUS_DEVICE(&s->sata), 0, AW_A10_SATA_BASE);
    sysbus_connect_irq(SYS_BUS_DEVICE(&s->sata), 0, s->irq[56]);

    /* FIXME use a qdev chardev prop instead of serial_hd() */
    serial_mm_init(get_system_memory(), AW_A10_UART0_REG_BASE, 2, s->irq[1],
                   115200, serial_hd(0), DEVICE_NATIVE_ENDIAN);
}
示例#3
0
文件: fsl-imx6ul.c 项目: CTU-IIG/qemu
static void fsl_imx6ul_realize(DeviceState *dev, Error **errp)
{
    FslIMX6ULState *s = FSL_IMX6UL(dev);
    int i;
    qemu_irq irq;
    char name[NAME_SIZE];

    if (smp_cpus > FSL_IMX6UL_NUM_CPUS) {
        error_setg(errp, "%s: Only %d CPUs are supported (%d requested)",
                   TYPE_FSL_IMX6UL, FSL_IMX6UL_NUM_CPUS, smp_cpus);
        return;
    }

    for (i = 0; i < smp_cpus; i++) {
        Object *o = OBJECT(&s->cpu[i]);

        object_property_set_int(o, QEMU_PSCI_CONDUIT_SMC,
                                "psci-conduit", &error_abort);

        /* On uniprocessor, the CBAR is set to 0 */
        if (smp_cpus > 1) {
            object_property_set_int(o, FSL_IMX6UL_A7MPCORE_ADDR,
                                    "reset-cbar", &error_abort);
        }

        if (i) {
            /* Secondary CPUs start in PSCI powered-down state */
            object_property_set_bool(o, true,
                                     "start-powered-off", &error_abort);
        }

        object_property_set_bool(o, true, "realized", &error_abort);
    }

    /*
     * A7MPCORE
     */
    object_property_set_int(OBJECT(&s->a7mpcore), smp_cpus, "num-cpu",
                            &error_abort);
    object_property_set_int(OBJECT(&s->a7mpcore),
                            FSL_IMX6UL_MAX_IRQ + GIC_INTERNAL,
                            "num-irq", &error_abort);
    object_property_set_bool(OBJECT(&s->a7mpcore), true, "realized",
                             &error_abort);
    sysbus_mmio_map(SYS_BUS_DEVICE(&s->a7mpcore), 0, FSL_IMX6UL_A7MPCORE_ADDR);

    for (i = 0; i < smp_cpus; i++) {
        SysBusDevice *sbd = SYS_BUS_DEVICE(&s->a7mpcore);
        DeviceState  *d   = DEVICE(qemu_get_cpu(i));

        irq = qdev_get_gpio_in(d, ARM_CPU_IRQ);
        sysbus_connect_irq(sbd, i, irq);
        sysbus_connect_irq(sbd, i + smp_cpus, qdev_get_gpio_in(d, ARM_CPU_FIQ));
        sysbus_connect_irq(sbd, i + 2 * smp_cpus,
                           qdev_get_gpio_in(d, ARM_CPU_VIRQ));
        sysbus_connect_irq(sbd, i + 3 * smp_cpus,
                           qdev_get_gpio_in(d, ARM_CPU_VFIQ));
    }

    /*
     * A7MPCORE DAP
     */
    create_unimplemented_device("a7mpcore-dap", FSL_IMX6UL_A7MPCORE_DAP_ADDR,
                                0x100000);

    /*
     * GPT 1, 2
     */
    for (i = 0; i < FSL_IMX6UL_NUM_GPTS; i++) {
        static const hwaddr FSL_IMX6UL_GPTn_ADDR[FSL_IMX6UL_NUM_GPTS] = {
            FSL_IMX6UL_GPT1_ADDR,
            FSL_IMX6UL_GPT2_ADDR,
        };

        static const int FSL_IMX6UL_GPTn_IRQ[FSL_IMX6UL_NUM_GPTS] = {
            FSL_IMX6UL_GPT1_IRQ,
            FSL_IMX6UL_GPT2_IRQ,
        };

        s->gpt[i].ccm = IMX_CCM(&s->ccm);
        object_property_set_bool(OBJECT(&s->gpt[i]), true, "realized",
                                 &error_abort);

        sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpt[i]), 0,
                        FSL_IMX6UL_GPTn_ADDR[i]);

        sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpt[i]), 0,
                           qdev_get_gpio_in(DEVICE(&s->a7mpcore),
                                            FSL_IMX6UL_GPTn_IRQ[i]));
    }

    /*
     * EPIT 1, 2
     */
    for (i = 0; i < FSL_IMX6UL_NUM_EPITS; i++) {
        static const hwaddr FSL_IMX6UL_EPITn_ADDR[FSL_IMX6UL_NUM_EPITS] = {
            FSL_IMX6UL_EPIT1_ADDR,
            FSL_IMX6UL_EPIT2_ADDR,
        };

        static const int FSL_IMX6UL_EPITn_IRQ[FSL_IMX6UL_NUM_EPITS] = {
            FSL_IMX6UL_EPIT1_IRQ,
            FSL_IMX6UL_EPIT2_IRQ,
        };

        s->epit[i].ccm = IMX_CCM(&s->ccm);
        object_property_set_bool(OBJECT(&s->epit[i]), true, "realized",
                                 &error_abort);

        sysbus_mmio_map(SYS_BUS_DEVICE(&s->epit[i]), 0,
                        FSL_IMX6UL_EPITn_ADDR[i]);

        sysbus_connect_irq(SYS_BUS_DEVICE(&s->epit[i]), 0,
                           qdev_get_gpio_in(DEVICE(&s->a7mpcore),
                                            FSL_IMX6UL_EPITn_IRQ[i]));
    }

    /*
     * GPIO
     */
    for (i = 0; i < FSL_IMX6UL_NUM_GPIOS; i++) {
        static const hwaddr FSL_IMX6UL_GPIOn_ADDR[FSL_IMX6UL_NUM_GPIOS] = {
            FSL_IMX6UL_GPIO1_ADDR,
            FSL_IMX6UL_GPIO2_ADDR,
            FSL_IMX6UL_GPIO3_ADDR,
            FSL_IMX6UL_GPIO4_ADDR,
            FSL_IMX6UL_GPIO5_ADDR,
        };

        static const int FSL_IMX6UL_GPIOn_LOW_IRQ[FSL_IMX6UL_NUM_GPIOS] = {
            FSL_IMX6UL_GPIO1_LOW_IRQ,
            FSL_IMX6UL_GPIO2_LOW_IRQ,
            FSL_IMX6UL_GPIO3_LOW_IRQ,
            FSL_IMX6UL_GPIO4_LOW_IRQ,
            FSL_IMX6UL_GPIO5_LOW_IRQ,
        };

        static const int FSL_IMX6UL_GPIOn_HIGH_IRQ[FSL_IMX6UL_NUM_GPIOS] = {
            FSL_IMX6UL_GPIO1_HIGH_IRQ,
            FSL_IMX6UL_GPIO2_HIGH_IRQ,
            FSL_IMX6UL_GPIO3_HIGH_IRQ,
            FSL_IMX6UL_GPIO4_HIGH_IRQ,
            FSL_IMX6UL_GPIO5_HIGH_IRQ,
        };

        object_property_set_bool(OBJECT(&s->gpio[i]), true, "realized",
                                 &error_abort);

        sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpio[i]), 0,
                        FSL_IMX6UL_GPIOn_ADDR[i]);

        sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpio[i]), 0,
                           qdev_get_gpio_in(DEVICE(&s->a7mpcore),
                                            FSL_IMX6UL_GPIOn_LOW_IRQ[i]));

        sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpio[i]), 1,
                           qdev_get_gpio_in(DEVICE(&s->a7mpcore),
                                            FSL_IMX6UL_GPIOn_HIGH_IRQ[i]));
    }

    /*
     * IOMUXC and IOMUXC_GPR
     */
    for (i = 0; i < 1; i++) {
        static const hwaddr FSL_IMX6UL_IOMUXCn_ADDR[FSL_IMX6UL_NUM_IOMUXCS] = {
            FSL_IMX6UL_IOMUXC_ADDR,
            FSL_IMX6UL_IOMUXC_GPR_ADDR,
        };

        snprintf(name, NAME_SIZE, "iomuxc%d", i);
        create_unimplemented_device(name, FSL_IMX6UL_IOMUXCn_ADDR[i], 0x4000);
    }

    /*
     * CCM
     */
    object_property_set_bool(OBJECT(&s->ccm), true, "realized", &error_abort);
    sysbus_mmio_map(SYS_BUS_DEVICE(&s->ccm), 0, FSL_IMX6UL_CCM_ADDR);

    /*
     * SRC
     */
    object_property_set_bool(OBJECT(&s->src), true, "realized", &error_abort);
    sysbus_mmio_map(SYS_BUS_DEVICE(&s->src), 0, FSL_IMX6UL_SRC_ADDR);

    /*
     * GPCv2
     */
    object_property_set_bool(OBJECT(&s->gpcv2), true,
                             "realized", &error_abort);
    sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpcv2), 0, FSL_IMX6UL_GPC_ADDR);

    /* Initialize all ECSPI */
    for (i = 0; i < FSL_IMX6UL_NUM_ECSPIS; i++) {
        static const hwaddr FSL_IMX6UL_SPIn_ADDR[FSL_IMX6UL_NUM_ECSPIS] = {
            FSL_IMX6UL_ECSPI1_ADDR,
            FSL_IMX6UL_ECSPI2_ADDR,
            FSL_IMX6UL_ECSPI3_ADDR,
            FSL_IMX6UL_ECSPI4_ADDR,
        };

        static const int FSL_IMX6UL_SPIn_IRQ[FSL_IMX6UL_NUM_ECSPIS] = {
            FSL_IMX6UL_ECSPI1_IRQ,
            FSL_IMX6UL_ECSPI2_IRQ,
            FSL_IMX6UL_ECSPI3_IRQ,
            FSL_IMX6UL_ECSPI4_IRQ,
        };

        /* Initialize the SPI */
        object_property_set_bool(OBJECT(&s->spi[i]), true, "realized",
                                 &error_abort);

        sysbus_mmio_map(SYS_BUS_DEVICE(&s->spi[i]), 0,
                        FSL_IMX6UL_SPIn_ADDR[i]);

        sysbus_connect_irq(SYS_BUS_DEVICE(&s->spi[i]), 0,
                           qdev_get_gpio_in(DEVICE(&s->a7mpcore),
                                            FSL_IMX6UL_SPIn_IRQ[i]));
    }

    /*
     * I2C
     */
    for (i = 0; i < FSL_IMX6UL_NUM_I2CS; i++) {
        static const hwaddr FSL_IMX6UL_I2Cn_ADDR[FSL_IMX6UL_NUM_I2CS] = {
            FSL_IMX6UL_I2C1_ADDR,
            FSL_IMX6UL_I2C2_ADDR,
            FSL_IMX6UL_I2C3_ADDR,
            FSL_IMX6UL_I2C4_ADDR,
        };

        static const int FSL_IMX6UL_I2Cn_IRQ[FSL_IMX6UL_NUM_I2CS] = {
            FSL_IMX6UL_I2C1_IRQ,
            FSL_IMX6UL_I2C2_IRQ,
            FSL_IMX6UL_I2C3_IRQ,
            FSL_IMX6UL_I2C4_IRQ,
        };

        object_property_set_bool(OBJECT(&s->i2c[i]), true, "realized",
                                 &error_abort);
        sysbus_mmio_map(SYS_BUS_DEVICE(&s->i2c[i]), 0, FSL_IMX6UL_I2Cn_ADDR[i]);

        sysbus_connect_irq(SYS_BUS_DEVICE(&s->i2c[i]), 0,
                           qdev_get_gpio_in(DEVICE(&s->a7mpcore),
                                            FSL_IMX6UL_I2Cn_IRQ[i]));
    }

    /*
     * UART
     */
    for (i = 0; i < FSL_IMX6UL_NUM_UARTS; i++) {
        static const hwaddr FSL_IMX6UL_UARTn_ADDR[FSL_IMX6UL_NUM_UARTS] = {
            FSL_IMX6UL_UART1_ADDR,
            FSL_IMX6UL_UART2_ADDR,
            FSL_IMX6UL_UART3_ADDR,
            FSL_IMX6UL_UART4_ADDR,
            FSL_IMX6UL_UART5_ADDR,
            FSL_IMX6UL_UART6_ADDR,
            FSL_IMX6UL_UART7_ADDR,
            FSL_IMX6UL_UART8_ADDR,
        };

        static const int FSL_IMX6UL_UARTn_IRQ[FSL_IMX6UL_NUM_UARTS] = {
            FSL_IMX6UL_UART1_IRQ,
            FSL_IMX6UL_UART2_IRQ,
            FSL_IMX6UL_UART3_IRQ,
            FSL_IMX6UL_UART4_IRQ,
            FSL_IMX6UL_UART5_IRQ,
            FSL_IMX6UL_UART6_IRQ,
            FSL_IMX6UL_UART7_IRQ,
            FSL_IMX6UL_UART8_IRQ,
        };

        qdev_prop_set_chr(DEVICE(&s->uart[i]), "chardev", serial_hd(i));

        object_property_set_bool(OBJECT(&s->uart[i]), true, "realized",
                                 &error_abort);

        sysbus_mmio_map(SYS_BUS_DEVICE(&s->uart[i]), 0,
                        FSL_IMX6UL_UARTn_ADDR[i]);

        sysbus_connect_irq(SYS_BUS_DEVICE(&s->uart[i]), 0,
                           qdev_get_gpio_in(DEVICE(&s->a7mpcore),
                                            FSL_IMX6UL_UARTn_IRQ[i]));
    }

    /*
     * Ethernet
     */
    for (i = 0; i < FSL_IMX6UL_NUM_ETHS; i++) {
        static const hwaddr FSL_IMX6UL_ENETn_ADDR[FSL_IMX6UL_NUM_ETHS] = {
            FSL_IMX6UL_ENET1_ADDR,
            FSL_IMX6UL_ENET2_ADDR,
        };

        static const int FSL_IMX6UL_ENETn_IRQ[FSL_IMX6UL_NUM_ETHS] = {
            FSL_IMX6UL_ENET1_IRQ,
            FSL_IMX6UL_ENET2_IRQ,
        };

        static const int FSL_IMX6UL_ENETn_TIMER_IRQ[FSL_IMX6UL_NUM_ETHS] = {
            FSL_IMX6UL_ENET1_TIMER_IRQ,
            FSL_IMX6UL_ENET2_TIMER_IRQ,
        };

        object_property_set_uint(OBJECT(&s->eth[i]),
                                 FSL_IMX6UL_ETH_NUM_TX_RINGS,
                                 "tx-ring-num", &error_abort);
        qdev_set_nic_properties(DEVICE(&s->eth[i]), &nd_table[i]);
        object_property_set_bool(OBJECT(&s->eth[i]), true, "realized",
                                 &error_abort);

        sysbus_mmio_map(SYS_BUS_DEVICE(&s->eth[i]), 0,
                        FSL_IMX6UL_ENETn_ADDR[i]);

        sysbus_connect_irq(SYS_BUS_DEVICE(&s->eth[i]), 0,
                           qdev_get_gpio_in(DEVICE(&s->a7mpcore),
                                            FSL_IMX6UL_ENETn_IRQ[i]));

        sysbus_connect_irq(SYS_BUS_DEVICE(&s->eth[i]), 1,
                           qdev_get_gpio_in(DEVICE(&s->a7mpcore),
                                            FSL_IMX6UL_ENETn_TIMER_IRQ[i]));
    }

    /*
     * USDHC
     */
    for (i = 0; i < FSL_IMX6UL_NUM_USDHCS; i++) {
        static const hwaddr FSL_IMX6UL_USDHCn_ADDR[FSL_IMX6UL_NUM_USDHCS] = {
            FSL_IMX6UL_USDHC1_ADDR,
            FSL_IMX6UL_USDHC2_ADDR,
        };

        static const int FSL_IMX6UL_USDHCn_IRQ[FSL_IMX6UL_NUM_USDHCS] = {
            FSL_IMX6UL_USDHC1_IRQ,
            FSL_IMX6UL_USDHC2_IRQ,
        };

        object_property_set_bool(OBJECT(&s->usdhc[i]), true, "realized",
                                 &error_abort);

        sysbus_mmio_map(SYS_BUS_DEVICE(&s->usdhc[i]), 0,
                        FSL_IMX6UL_USDHCn_ADDR[i]);

        sysbus_connect_irq(SYS_BUS_DEVICE(&s->usdhc[i]), 0,
                           qdev_get_gpio_in(DEVICE(&s->a7mpcore),
                                            FSL_IMX6UL_USDHCn_IRQ[i]));
    }

    /*
     * SNVS
     */
    object_property_set_bool(OBJECT(&s->snvs), true, "realized", &error_abort);
    sysbus_mmio_map(SYS_BUS_DEVICE(&s->snvs), 0, FSL_IMX6UL_SNVS_HP_ADDR);

    /*
     * Watchdog
     */
    for (i = 0; i < FSL_IMX6UL_NUM_WDTS; i++) {
        static const hwaddr FSL_IMX6UL_WDOGn_ADDR[FSL_IMX6UL_NUM_WDTS] = {
            FSL_IMX6UL_WDOG1_ADDR,
            FSL_IMX6UL_WDOG2_ADDR,
            FSL_IMX6UL_WDOG3_ADDR,
        };

        object_property_set_bool(OBJECT(&s->wdt[i]), true, "realized",
                                 &error_abort);

        sysbus_mmio_map(SYS_BUS_DEVICE(&s->wdt[i]), 0,
                        FSL_IMX6UL_WDOGn_ADDR[i]);
    }

    /*
     * GPR
     */
    object_property_set_bool(OBJECT(&s->gpr), true, "realized",
                             &error_abort);
    sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpr), 0, FSL_IMX6UL_IOMUXC_GPR_ADDR);

    /*
     * SDMA
     */
    create_unimplemented_device("sdma", FSL_IMX6UL_SDMA_ADDR, 0x4000);

    /*
     * APHB_DMA
     */
    create_unimplemented_device("aphb_dma", FSL_IMX6UL_APBH_DMA_ADDR,
                                FSL_IMX6UL_APBH_DMA_SIZE);

    /*
     * ADCs
     */
    for (i = 0; i < FSL_IMX6UL_NUM_ADCS; i++) {
        static const hwaddr FSL_IMX6UL_ADCn_ADDR[FSL_IMX6UL_NUM_ADCS] = {
            FSL_IMX6UL_ADC1_ADDR,
            FSL_IMX6UL_ADC2_ADDR,
        };

        snprintf(name, NAME_SIZE, "adc%d", i);
        create_unimplemented_device(name, FSL_IMX6UL_ADCn_ADDR[i], 0x4000);
    }

    /*
     * LCD
     */
    create_unimplemented_device("lcdif", FSL_IMX6UL_LCDIF_ADDR, 0x4000);

    /*
     * ROM memory
     */
    memory_region_init_rom(&s->rom, NULL, "imx6ul.rom",
                           FSL_IMX6UL_ROM_SIZE, &error_abort);
    memory_region_add_subregion(get_system_memory(), FSL_IMX6UL_ROM_ADDR,
                                &s->rom);

    /*
     * CAAM memory
     */
    memory_region_init_rom(&s->caam, NULL, "imx6ul.caam",
                           FSL_IMX6UL_CAAM_MEM_SIZE, &error_abort);
    memory_region_add_subregion(get_system_memory(), FSL_IMX6UL_CAAM_MEM_ADDR,
                                &s->caam);

    /*
     * OCRAM memory
     */
    memory_region_init_ram(&s->ocram, NULL, "imx6ul.ocram",
                           FSL_IMX6UL_OCRAM_MEM_SIZE,
                           &error_abort);
    memory_region_add_subregion(get_system_memory(), FSL_IMX6UL_OCRAM_MEM_ADDR,
                                &s->ocram);

    /*
     * internal OCRAM (128 KB) is aliased over 512 KB
     */
    memory_region_init_alias(&s->ocram_alias, NULL, "imx6ul.ocram_alias",
                             &s->ocram, 0, FSL_IMX6UL_OCRAM_ALIAS_SIZE);
    memory_region_add_subregion(get_system_memory(),
                                FSL_IMX6UL_OCRAM_ALIAS_ADDR, &s->ocram_alias);
}
示例#4
0
static void
petalogix_s3adsp1800_init(MachineState *machine)
{
    ram_addr_t ram_size = machine->ram_size;
    DeviceState *dev;
    MicroBlazeCPU *cpu;
    DriveInfo *dinfo;
    int i;
    hwaddr ddr_base = MEMORY_BASEADDR;
    MemoryRegion *phys_lmb_bram = g_new(MemoryRegion, 1);
    MemoryRegion *phys_ram = g_new(MemoryRegion, 1);
    qemu_irq irq[32];
    MemoryRegion *sysmem = get_system_memory();

    cpu = MICROBLAZE_CPU(object_new(TYPE_MICROBLAZE_CPU));
    object_property_set_str(OBJECT(cpu), "7.10.d", "version", &error_abort);
    object_property_set_bool(OBJECT(cpu), true, "realized", &error_abort);

    /* Attach emulated BRAM through the LMB.  */
    memory_region_init_ram(phys_lmb_bram, NULL,
                           "petalogix_s3adsp1800.lmb_bram", LMB_BRAM_SIZE,
                           &error_fatal);
    memory_region_add_subregion(sysmem, 0x00000000, phys_lmb_bram);

    memory_region_init_ram(phys_ram, NULL, "petalogix_s3adsp1800.ram",
                           ram_size, &error_fatal);
    memory_region_add_subregion(sysmem, ddr_base, phys_ram);

    dinfo = drive_get(IF_PFLASH, 0, 0);
    pflash_cfi01_register(FLASH_BASEADDR,
                          NULL, "petalogix_s3adsp1800.flash", FLASH_SIZE,
                          dinfo ? blk_by_legacy_dinfo(dinfo) : NULL,
                          64 * KiB, FLASH_SIZE >> 16,
                          1, 0x89, 0x18, 0x0000, 0x0, 1);

    dev = qdev_create(NULL, "xlnx.xps-intc");
    qdev_prop_set_uint32(dev, "kind-of-intr",
                         1 << ETHLITE_IRQ | 1 << UARTLITE_IRQ);
    qdev_init_nofail(dev);
    sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, INTC_BASEADDR);
    sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0,
                       qdev_get_gpio_in(DEVICE(cpu), MB_CPU_IRQ));
    for (i = 0; i < 32; i++) {
        irq[i] = qdev_get_gpio_in(dev, i);
    }

    xilinx_uartlite_create(UARTLITE_BASEADDR, irq[UARTLITE_IRQ],
                           serial_hd(0));

    /* 2 timers at irq 2 @ 62 Mhz.  */
    dev = qdev_create(NULL, "xlnx.xps-timer");
    qdev_prop_set_uint32(dev, "one-timer-only", 0);
    qdev_prop_set_uint32(dev, "clock-frequency", 62 * 1000000);
    qdev_init_nofail(dev);
    sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, TIMER_BASEADDR);
    sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, irq[TIMER_IRQ]);

    qemu_check_nic_model(&nd_table[0], "xlnx.xps-ethernetlite");
    dev = qdev_create(NULL, "xlnx.xps-ethernetlite");
    qdev_set_nic_properties(dev, &nd_table[0]);
    qdev_prop_set_uint32(dev, "tx-ping-pong", 0);
    qdev_prop_set_uint32(dev, "rx-ping-pong", 0);
    qdev_init_nofail(dev);
    sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, ETHLITE_BASEADDR);
    sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, irq[ETHLITE_IRQ]);

    create_unimplemented_device("gpio", GPIO_BASEADDR, 0x10000);

    microblaze_load_kernel(cpu, ddr_base, ram_size,
                           machine->initrd_filename,
                           BINARY_DEVICE_TREE_FILE,
                           NULL);
}
示例#5
0
文件: aspeed_soc.c 项目: CTU-IIG/qemu
static void aspeed_soc_realize(DeviceState *dev, Error **errp)
{
    int i;
    AspeedSoCState *s = ASPEED_SOC(dev);
    AspeedSoCClass *sc = ASPEED_SOC_GET_CLASS(s);
    Error *err = NULL, *local_err = NULL;

    /* IO space */
    create_unimplemented_device("aspeed_soc.io",
                                ASPEED_SOC_IOMEM_BASE, ASPEED_SOC_IOMEM_SIZE);

    /* CPU */
    object_property_set_bool(OBJECT(&s->cpu), true, "realized", &err);
    if (err) {
        error_propagate(errp, err);
        return;
    }

    /* SRAM */
    memory_region_init_ram(&s->sram, OBJECT(dev), "aspeed.sram",
                           sc->info->sram_size, &err);
    if (err) {
        error_propagate(errp, err);
        return;
    }
    memory_region_add_subregion(get_system_memory(), ASPEED_SOC_SRAM_BASE,
                                &s->sram);

    /* SCU */
    object_property_set_bool(OBJECT(&s->scu), true, "realized", &err);
    if (err) {
        error_propagate(errp, err);
        return;
    }
    sysbus_mmio_map(SYS_BUS_DEVICE(&s->scu), 0, ASPEED_SOC_SCU_BASE);

    /* VIC */
    object_property_set_bool(OBJECT(&s->vic), true, "realized", &err);
    if (err) {
        error_propagate(errp, err);
        return;
    }
    sysbus_mmio_map(SYS_BUS_DEVICE(&s->vic), 0, ASPEED_SOC_VIC_BASE);
    sysbus_connect_irq(SYS_BUS_DEVICE(&s->vic), 0,
                       qdev_get_gpio_in(DEVICE(&s->cpu), ARM_CPU_IRQ));
    sysbus_connect_irq(SYS_BUS_DEVICE(&s->vic), 1,
                       qdev_get_gpio_in(DEVICE(&s->cpu), ARM_CPU_FIQ));

    /* Timer */
    object_property_set_bool(OBJECT(&s->timerctrl), true, "realized", &err);
    if (err) {
        error_propagate(errp, err);
        return;
    }
    sysbus_mmio_map(SYS_BUS_DEVICE(&s->timerctrl), 0, ASPEED_SOC_TIMER_BASE);
    for (i = 0; i < ARRAY_SIZE(timer_irqs); i++) {
        qemu_irq irq = qdev_get_gpio_in(DEVICE(&s->vic), timer_irqs[i]);
        sysbus_connect_irq(SYS_BUS_DEVICE(&s->timerctrl), i, irq);
    }

    /* UART - attach an 8250 to the IO space as our UART5 */
    if (serial_hd(0)) {
        qemu_irq uart5 = qdev_get_gpio_in(DEVICE(&s->vic), uart_irqs[4]);
        serial_mm_init(get_system_memory(),
                       ASPEED_SOC_IOMEM_BASE + ASPEED_SOC_UART_5_BASE, 2,
                       uart5, 38400, serial_hd(0), DEVICE_LITTLE_ENDIAN);
    }

    /* I2C */
    object_property_set_bool(OBJECT(&s->i2c), true, "realized", &err);
    if (err) {
        error_propagate(errp, err);
        return;
    }
    sysbus_mmio_map(SYS_BUS_DEVICE(&s->i2c), 0, ASPEED_SOC_I2C_BASE);
    sysbus_connect_irq(SYS_BUS_DEVICE(&s->i2c), 0,
                       qdev_get_gpio_in(DEVICE(&s->vic), 12));

    /* FMC, The number of CS is set at the board level */
    object_property_set_bool(OBJECT(&s->fmc), true, "realized", &err);
    if (err) {
        error_propagate(errp, err);
        return;
    }
    sysbus_mmio_map(SYS_BUS_DEVICE(&s->fmc), 0, ASPEED_SOC_FMC_BASE);
    sysbus_mmio_map(SYS_BUS_DEVICE(&s->fmc), 1,
                    s->fmc.ctrl->flash_window_base);
    sysbus_connect_irq(SYS_BUS_DEVICE(&s->fmc), 0,
                       qdev_get_gpio_in(DEVICE(&s->vic), 19));

    /* SPI */
    for (i = 0; i < sc->info->spis_num; i++) {
        object_property_set_int(OBJECT(&s->spi[i]), 1, "num-cs", &err);
        object_property_set_bool(OBJECT(&s->spi[i]), true, "realized",
                                 &local_err);
        error_propagate(&err, local_err);
        if (err) {
            error_propagate(errp, err);
            return;
        }
        sysbus_mmio_map(SYS_BUS_DEVICE(&s->spi[i]), 0, sc->info->spi_bases[i]);
        sysbus_mmio_map(SYS_BUS_DEVICE(&s->spi[i]), 1,
                        s->spi[i].ctrl->flash_window_base);
    }

    /* SDMC - SDRAM Memory Controller */
    object_property_set_bool(OBJECT(&s->sdmc), true, "realized", &err);
    if (err) {
        error_propagate(errp, err);
        return;
    }
    sysbus_mmio_map(SYS_BUS_DEVICE(&s->sdmc), 0, ASPEED_SOC_SDMC_BASE);

    /* Watch dog */
    for (i = 0; i < sc->info->wdts_num; i++) {
        object_property_set_bool(OBJECT(&s->wdt[i]), true, "realized", &err);
        if (err) {
            error_propagate(errp, err);
            return;
        }
        sysbus_mmio_map(SYS_BUS_DEVICE(&s->wdt[i]), 0,
                        ASPEED_SOC_WDT_BASE + i * 0x20);
    }

    /* Net */
    qdev_set_nic_properties(DEVICE(&s->ftgmac100), &nd_table[0]);
    object_property_set_bool(OBJECT(&s->ftgmac100), true, "aspeed", &err);
    object_property_set_bool(OBJECT(&s->ftgmac100), true, "realized",
                             &local_err);
    error_propagate(&err, local_err);
    if (err) {
        error_propagate(errp, err);
        return;
    }
    sysbus_mmio_map(SYS_BUS_DEVICE(&s->ftgmac100), 0, ASPEED_SOC_ETH1_BASE);
    sysbus_connect_irq(SYS_BUS_DEVICE(&s->ftgmac100), 0,
                       qdev_get_gpio_in(DEVICE(&s->vic), 2));
}
示例#6
0
文件: msf2-soc.c 项目: CTU-IIG/qemu
static void m2sxxx_soc_realize(DeviceState *dev_soc, Error **errp)
{
    MSF2State *s = MSF2_SOC(dev_soc);
    DeviceState *dev, *armv7m;
    SysBusDevice *busdev;
    Error *err = NULL;
    int i;

    MemoryRegion *system_memory = get_system_memory();
    MemoryRegion *nvm = g_new(MemoryRegion, 1);
    MemoryRegion *nvm_alias = g_new(MemoryRegion, 1);
    MemoryRegion *sram = g_new(MemoryRegion, 1);

    memory_region_init_rom(nvm, NULL, "MSF2.eNVM", s->envm_size,
                           &error_fatal);
    /*
     * On power-on, the eNVM region 0x60000000 is automatically
     * remapped to the Cortex-M3 processor executable region
     * start address (0x0). We do not support remapping other eNVM,
     * eSRAM and DDR regions by guest(via Sysreg) currently.
     */
    memory_region_init_alias(nvm_alias, NULL, "MSF2.eNVM",
                             nvm, 0, s->envm_size);

    memory_region_add_subregion(system_memory, ENVM_BASE_ADDRESS, nvm);
    memory_region_add_subregion(system_memory, 0, nvm_alias);

    memory_region_init_ram(sram, NULL, "MSF2.eSRAM", s->esram_size,
                           &error_fatal);
    memory_region_add_subregion(system_memory, SRAM_BASE_ADDRESS, sram);

    armv7m = DEVICE(&s->armv7m);
    qdev_prop_set_uint32(armv7m, "num-irq", 81);
    qdev_prop_set_string(armv7m, "cpu-type", s->cpu_type);
    qdev_prop_set_bit(armv7m, "enable-bitband", true);
    object_property_set_link(OBJECT(&s->armv7m), OBJECT(get_system_memory()),
                                     "memory", &error_abort);
    object_property_set_bool(OBJECT(&s->armv7m), true, "realized", &err);
    if (err != NULL) {
        error_propagate(errp, err);
        return;
    }

    if (!s->m3clk) {
        error_setg(errp, "Invalid m3clk value");
        error_append_hint(errp, "m3clk can not be zero\n");
        return;
    }

    qdev_connect_gpio_out_named(DEVICE(&s->armv7m.nvic), "SYSRESETREQ", 0,
                                qemu_allocate_irq(&do_sys_reset, NULL, 0));

    system_clock_scale = NANOSECONDS_PER_SECOND / s->m3clk;

    for (i = 0; i < MSF2_NUM_UARTS; i++) {
        if (serial_hd(i)) {
            serial_mm_init(get_system_memory(), uart_addr[i], 2,
                           qdev_get_gpio_in(armv7m, uart_irq[i]),
                           115200, serial_hd(i), DEVICE_NATIVE_ENDIAN);
        }
    }

    dev = DEVICE(&s->timer);
    /* APB0 clock is the timer input clock */
    qdev_prop_set_uint32(dev, "clock-frequency", s->m3clk / s->apb0div);
    object_property_set_bool(OBJECT(&s->timer), true, "realized", &err);
    if (err != NULL) {
        error_propagate(errp, err);
        return;
    }
    busdev = SYS_BUS_DEVICE(dev);
    sysbus_mmio_map(busdev, 0, MSF2_TIMER_BASE);
    sysbus_connect_irq(busdev, 0,
                           qdev_get_gpio_in(armv7m, timer_irq[0]));
    sysbus_connect_irq(busdev, 1,
                           qdev_get_gpio_in(armv7m, timer_irq[1]));

    dev = DEVICE(&s->sysreg);
    qdev_prop_set_uint32(dev, "apb0divisor", s->apb0div);
    qdev_prop_set_uint32(dev, "apb1divisor", s->apb1div);
    object_property_set_bool(OBJECT(&s->sysreg), true, "realized", &err);
    if (err != NULL) {
        error_propagate(errp, err);
        return;
    }
    busdev = SYS_BUS_DEVICE(dev);
    sysbus_mmio_map(busdev, 0, MSF2_SYSREG_BASE);

    for (i = 0; i < MSF2_NUM_SPIS; i++) {
        gchar *bus_name;

        object_property_set_bool(OBJECT(&s->spi[i]), true, "realized", &err);
        if (err != NULL) {
            error_propagate(errp, err);
            return;
        }

        sysbus_mmio_map(SYS_BUS_DEVICE(&s->spi[i]), 0, spi_addr[i]);
        sysbus_connect_irq(SYS_BUS_DEVICE(&s->spi[i]), 0,
                           qdev_get_gpio_in(armv7m, spi_irq[i]));

        /* Alias controller SPI bus to the SoC itself */
        bus_name = g_strdup_printf("spi%d", i);
        object_property_add_alias(OBJECT(s), bus_name,
                                  OBJECT(&s->spi[i]), "spi",
                                  &error_abort);
        g_free(bus_name);
    }

    /* Below devices are not modelled yet. */
    create_unimplemented_device("i2c_0", 0x40002000, 0x1000);
    create_unimplemented_device("dma", 0x40003000, 0x1000);
    create_unimplemented_device("watchdog", 0x40005000, 0x1000);
    create_unimplemented_device("i2c_1", 0x40012000, 0x1000);
    create_unimplemented_device("gpio", 0x40013000, 0x1000);
    create_unimplemented_device("hs-dma", 0x40014000, 0x1000);
    create_unimplemented_device("can", 0x40015000, 0x1000);
    create_unimplemented_device("rtc", 0x40017000, 0x1000);
    create_unimplemented_device("apb_config", 0x40020000, 0x10000);
    create_unimplemented_device("emac", 0x40041000, 0x1000);
    create_unimplemented_device("usb", 0x40043000, 0x1000);
}
示例#7
0
文件: mps2.c 项目: dgibson/qemu
static void mps2_common_init(MachineState *machine)
{
    MPS2MachineState *mms = MPS2_MACHINE(machine);
    MPS2MachineClass *mmc = MPS2_MACHINE_GET_CLASS(machine);
    MemoryRegion *system_memory = get_system_memory();
    MachineClass *mc = MACHINE_GET_CLASS(machine);
    DeviceState *armv7m, *sccdev;

    if (strcmp(machine->cpu_type, mc->default_cpu_type) != 0) {
        error_report("This board can only be used with CPU %s",
                     mc->default_cpu_type);
        exit(1);
    }

    /* The FPGA images have an odd combination of different RAMs,
     * because in hardware they are different implementations and
     * connected to different buses, giving varying performance/size
     * tradeoffs. For QEMU they're all just RAM, though. We arbitrarily
     * call the 16MB our "system memory", as it's the largest lump.
     *
     * Common to both boards:
     *  0x21000000..0x21ffffff : PSRAM (16MB)
     * AN385 only:
     *  0x00000000 .. 0x003fffff : ZBT SSRAM1
     *  0x00400000 .. 0x007fffff : mirror of ZBT SSRAM1
     *  0x20000000 .. 0x203fffff : ZBT SSRAM 2&3
     *  0x20400000 .. 0x207fffff : mirror of ZBT SSRAM 2&3
     *  0x01000000 .. 0x01003fff : block RAM (16K)
     *  0x01004000 .. 0x01007fff : mirror of above
     *  0x01008000 .. 0x0100bfff : mirror of above
     *  0x0100c000 .. 0x0100ffff : mirror of above
     * AN511 only:
     *  0x00000000 .. 0x0003ffff : FPGA block RAM
     *  0x00400000 .. 0x007fffff : ZBT SSRAM1
     *  0x20000000 .. 0x2001ffff : SRAM
     *  0x20400000 .. 0x207fffff : ZBT SSRAM 2&3
     *
     * The AN385 has a feature where the lowest 16K can be mapped
     * either to the bottom of the ZBT SSRAM1 or to the block RAM.
     * This is of no use for QEMU so we don't implement it (as if
     * zbt_boot_ctrl is always zero).
     */
    memory_region_allocate_system_memory(&mms->psram,
                                         NULL, "mps.ram", 0x1000000);
    memory_region_add_subregion(system_memory, 0x21000000, &mms->psram);

    switch (mmc->fpga_type) {
    case FPGA_AN385:
        make_ram(&mms->ssram1, "mps.ssram1", 0x0, 0x400000);
        make_ram_alias(&mms->ssram1_m, "mps.ssram1_m", &mms->ssram1, 0x400000);
        make_ram(&mms->ssram23, "mps.ssram23", 0x20000000, 0x400000);
        make_ram_alias(&mms->ssram23_m, "mps.ssram23_m",
                       &mms->ssram23, 0x20400000);
        make_ram(&mms->blockram, "mps.blockram", 0x01000000, 0x4000);
        make_ram_alias(&mms->blockram_m1, "mps.blockram_m1",
                       &mms->blockram, 0x01004000);
        make_ram_alias(&mms->blockram_m2, "mps.blockram_m2",
                       &mms->blockram, 0x01008000);
        make_ram_alias(&mms->blockram_m3, "mps.blockram_m3",
                       &mms->blockram, 0x0100c000);
        break;
    case FPGA_AN511:
        make_ram(&mms->blockram, "mps.blockram", 0x0, 0x40000);
        make_ram(&mms->ssram1, "mps.ssram1", 0x00400000, 0x00800000);
        make_ram(&mms->sram, "mps.sram", 0x20000000, 0x20000);
        make_ram(&mms->ssram23, "mps.ssram23", 0x20400000, 0x400000);
        break;
    default:
        g_assert_not_reached();
    }

    sysbus_init_child_obj(OBJECT(mms), "armv7m", &mms->armv7m,
                          sizeof(mms->armv7m), TYPE_ARMV7M);
    armv7m = DEVICE(&mms->armv7m);
    switch (mmc->fpga_type) {
    case FPGA_AN385:
        qdev_prop_set_uint32(armv7m, "num-irq", 32);
        break;
    case FPGA_AN511:
        qdev_prop_set_uint32(armv7m, "num-irq", 64);
        break;
    default:
        g_assert_not_reached();
    }
    qdev_prop_set_string(armv7m, "cpu-type", machine->cpu_type);
    qdev_prop_set_bit(armv7m, "enable-bitband", true);
    object_property_set_link(OBJECT(&mms->armv7m), OBJECT(system_memory),
                             "memory", &error_abort);
    object_property_set_bool(OBJECT(&mms->armv7m), true, "realized",
                             &error_fatal);

    create_unimplemented_device("zbtsmram mirror", 0x00400000, 0x00400000);
    create_unimplemented_device("RESERVED 1", 0x00800000, 0x00800000);
    create_unimplemented_device("Block RAM", 0x01000000, 0x00010000);
    create_unimplemented_device("RESERVED 2", 0x01010000, 0x1EFF0000);
    create_unimplemented_device("RESERVED 3", 0x20800000, 0x00800000);
    create_unimplemented_device("PSRAM", 0x21000000, 0x01000000);
    /* These three ranges all cover multiple devices; we may implement
     * some of them below (in which case the real device takes precedence
     * over the unimplemented-region mapping).
     */
    create_unimplemented_device("CMSDK APB peripheral region @0x40000000",
                                0x40000000, 0x00010000);
    create_unimplemented_device("CMSDK peripheral region @0x40010000",
                                0x40010000, 0x00010000);
    create_unimplemented_device("Extra peripheral region @0x40020000",
                                0x40020000, 0x00010000);
    create_unimplemented_device("RESERVED 4", 0x40030000, 0x001D0000);
    create_unimplemented_device("VGA", 0x41000000, 0x0200000);

    switch (mmc->fpga_type) {
    case FPGA_AN385:
    {
        /* The overflow IRQs for UARTs 0, 1 and 2 are ORed together.
         * Overflow for UARTs 4 and 5 doesn't trigger any interrupt.
         */
        Object *orgate;
        DeviceState *orgate_dev;
        int i;

        orgate = object_new(TYPE_OR_IRQ);
        object_property_set_int(orgate, 6, "num-lines", &error_fatal);
        object_property_set_bool(orgate, true, "realized", &error_fatal);
        orgate_dev = DEVICE(orgate);
        qdev_connect_gpio_out(orgate_dev, 0, qdev_get_gpio_in(armv7m, 12));

        for (i = 0; i < 5; i++) {
            static const hwaddr uartbase[] = {0x40004000, 0x40005000,
                                              0x40006000, 0x40007000,
                                              0x40009000};
            /* RX irq number; TX irq is always one greater */
            static const int uartirq[] = {0, 2, 4, 18, 20};
            qemu_irq txovrint = NULL, rxovrint = NULL;

            if (i < 3) {
                txovrint = qdev_get_gpio_in(orgate_dev, i * 2);
                rxovrint = qdev_get_gpio_in(orgate_dev, i * 2 + 1);
            }

            cmsdk_apb_uart_create(uartbase[i],
                                  qdev_get_gpio_in(armv7m, uartirq[i] + 1),
                                  qdev_get_gpio_in(armv7m, uartirq[i]),
                                  txovrint, rxovrint,
                                  NULL,
                                  serial_hd(i), SYSCLK_FRQ);
        }
        break;
    }
    case FPGA_AN511:
    {
        /* The overflow IRQs for all UARTs are ORed together.
         * Tx and Rx IRQs for each UART are ORed together.
         */
        Object *orgate;
        DeviceState *orgate_dev;
        int i;

        orgate = object_new(TYPE_OR_IRQ);
        object_property_set_int(orgate, 10, "num-lines", &error_fatal);
        object_property_set_bool(orgate, true, "realized", &error_fatal);
        orgate_dev = DEVICE(orgate);
        qdev_connect_gpio_out(orgate_dev, 0, qdev_get_gpio_in(armv7m, 12));

        for (i = 0; i < 5; i++) {
            /* system irq numbers for the combined tx/rx for each UART */
            static const int uart_txrx_irqno[] = {0, 2, 45, 46, 56};
            static const hwaddr uartbase[] = {0x40004000, 0x40005000,
                                              0x4002c000, 0x4002d000,
                                              0x4002e000};
            Object *txrx_orgate;
            DeviceState *txrx_orgate_dev;

            txrx_orgate = object_new(TYPE_OR_IRQ);
            object_property_set_int(txrx_orgate, 2, "num-lines", &error_fatal);
            object_property_set_bool(txrx_orgate, true, "realized",
                                     &error_fatal);
            txrx_orgate_dev = DEVICE(txrx_orgate);
            qdev_connect_gpio_out(txrx_orgate_dev, 0,
                                  qdev_get_gpio_in(armv7m, uart_txrx_irqno[i]));
            cmsdk_apb_uart_create(uartbase[i],
                                  qdev_get_gpio_in(txrx_orgate_dev, 0),
                                  qdev_get_gpio_in(txrx_orgate_dev, 1),
                                  qdev_get_gpio_in(orgate_dev, i * 2),
                                  qdev_get_gpio_in(orgate_dev, i * 2 + 1),
                                  NULL,
                                  serial_hd(i), SYSCLK_FRQ);
        }
        break;
    }
    default:
        g_assert_not_reached();
    }

    cmsdk_apb_timer_create(0x40000000, qdev_get_gpio_in(armv7m, 8), SYSCLK_FRQ);
    cmsdk_apb_timer_create(0x40001000, qdev_get_gpio_in(armv7m, 9), SYSCLK_FRQ);

    sysbus_init_child_obj(OBJECT(mms), "dualtimer", &mms->dualtimer,
                          sizeof(mms->dualtimer), TYPE_CMSDK_APB_DUALTIMER);
    qdev_prop_set_uint32(DEVICE(&mms->dualtimer), "pclk-frq", SYSCLK_FRQ);
    object_property_set_bool(OBJECT(&mms->dualtimer), true, "realized",
                             &error_fatal);
    sysbus_connect_irq(SYS_BUS_DEVICE(&mms->dualtimer), 0,
                       qdev_get_gpio_in(armv7m, 10));
    sysbus_mmio_map(SYS_BUS_DEVICE(&mms->dualtimer), 0, 0x40002000);

    sysbus_init_child_obj(OBJECT(mms), "scc", &mms->scc,
                          sizeof(mms->scc), TYPE_MPS2_SCC);
    sccdev = DEVICE(&mms->scc);
    qdev_prop_set_uint32(sccdev, "scc-cfg4", 0x2);
    qdev_prop_set_uint32(sccdev, "scc-aid", 0x00200008);
    qdev_prop_set_uint32(sccdev, "scc-id", mmc->scc_id);
    object_property_set_bool(OBJECT(&mms->scc), true, "realized",
                             &error_fatal);
    sysbus_mmio_map(SYS_BUS_DEVICE(sccdev), 0, 0x4002f000);

    /* In hardware this is a LAN9220; the LAN9118 is software compatible
     * except that it doesn't support the checksum-offload feature.
     */
    lan9118_init(&nd_table[0], 0x40200000,
                 qdev_get_gpio_in(armv7m,
                                  mmc->fpga_type == FPGA_AN385 ? 13 : 47));

    system_clock_scale = NANOSECONDS_PER_SECOND / SYSCLK_FRQ;

    armv7m_load_kernel(ARM_CPU(first_cpu), machine->kernel_filename,
                       0x400000);
}
示例#8
0
文件: fsl-imx7.c 项目: stweil/qemu
static void fsl_imx7_realize(DeviceState *dev, Error **errp)
{
    FslIMX7State *s = FSL_IMX7(dev);
    Object *o;
    int i;
    qemu_irq irq;
    char name[NAME_SIZE];

    if (smp_cpus > FSL_IMX7_NUM_CPUS) {
        error_setg(errp, "%s: Only %d CPUs are supported (%d requested)",
                   TYPE_FSL_IMX7, FSL_IMX7_NUM_CPUS, smp_cpus);
        return;
    }

    for (i = 0; i < smp_cpus; i++) {
        o = OBJECT(&s->cpu[i]);

        object_property_set_int(o, QEMU_PSCI_CONDUIT_SMC,
                                "psci-conduit", &error_abort);

        /* On uniprocessor, the CBAR is set to 0 */
        if (smp_cpus > 1) {
            object_property_set_int(o, FSL_IMX7_A7MPCORE_ADDR,
                                    "reset-cbar", &error_abort);
        }

        if (i) {
            /* Secondary CPUs start in PSCI powered-down state */
            object_property_set_bool(o, true,
                                     "start-powered-off", &error_abort);
        }

        object_property_set_bool(o, true, "realized", &error_abort);
    }

    /*
     * A7MPCORE
     */
    object_property_set_int(OBJECT(&s->a7mpcore), smp_cpus, "num-cpu",
                            &error_abort);
    object_property_set_int(OBJECT(&s->a7mpcore),
                            FSL_IMX7_MAX_IRQ + GIC_INTERNAL,
                            "num-irq", &error_abort);

    object_property_set_bool(OBJECT(&s->a7mpcore), true, "realized",
                             &error_abort);
    sysbus_mmio_map(SYS_BUS_DEVICE(&s->a7mpcore), 0, FSL_IMX7_A7MPCORE_ADDR);

    for (i = 0; i < smp_cpus; i++) {
        SysBusDevice *sbd = SYS_BUS_DEVICE(&s->a7mpcore);
        DeviceState  *d   = DEVICE(qemu_get_cpu(i));

        irq = qdev_get_gpio_in(d, ARM_CPU_IRQ);
        sysbus_connect_irq(sbd, i, irq);
        irq = qdev_get_gpio_in(d, ARM_CPU_FIQ);
        sysbus_connect_irq(sbd, i + smp_cpus, irq);
        irq = qdev_get_gpio_in(d, ARM_CPU_VIRQ);
        sysbus_connect_irq(sbd, i + 2 * smp_cpus, irq);
        irq = qdev_get_gpio_in(d, ARM_CPU_VFIQ);
        sysbus_connect_irq(sbd, i + 3 * smp_cpus, irq);
    }

    /*
     * A7MPCORE DAP
     */
    create_unimplemented_device("a7mpcore-dap", FSL_IMX7_A7MPCORE_DAP_ADDR,
                                0x100000);

    /*
     * GPT1, 2, 3, 4
     */
    for (i = 0; i < FSL_IMX7_NUM_GPTS; i++) {
        static const hwaddr FSL_IMX7_GPTn_ADDR[FSL_IMX7_NUM_GPTS] = {
            FSL_IMX7_GPT1_ADDR,
            FSL_IMX7_GPT2_ADDR,
            FSL_IMX7_GPT3_ADDR,
            FSL_IMX7_GPT4_ADDR,
        };

        s->gpt[i].ccm = IMX_CCM(&s->ccm);
        object_property_set_bool(OBJECT(&s->gpt[i]), true, "realized",
                                 &error_abort);
        sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpt[i]), 0, FSL_IMX7_GPTn_ADDR[i]);
    }

    for (i = 0; i < FSL_IMX7_NUM_GPIOS; i++) {
        static const hwaddr FSL_IMX7_GPIOn_ADDR[FSL_IMX7_NUM_GPIOS] = {
            FSL_IMX7_GPIO1_ADDR,
            FSL_IMX7_GPIO2_ADDR,
            FSL_IMX7_GPIO3_ADDR,
            FSL_IMX7_GPIO4_ADDR,
            FSL_IMX7_GPIO5_ADDR,
            FSL_IMX7_GPIO6_ADDR,
            FSL_IMX7_GPIO7_ADDR,
        };

        object_property_set_bool(OBJECT(&s->gpio[i]), true, "realized",
                                 &error_abort);
        sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpio[i]), 0, FSL_IMX7_GPIOn_ADDR[i]);
    }

    /*
     * IOMUXC and IOMUXC_LPSR
     */
    for (i = 0; i < FSL_IMX7_NUM_IOMUXCS; i++) {
        static const hwaddr FSL_IMX7_IOMUXCn_ADDR[FSL_IMX7_NUM_IOMUXCS] = {
            FSL_IMX7_IOMUXC_ADDR,
            FSL_IMX7_IOMUXC_LPSR_ADDR,
        };

        snprintf(name, NAME_SIZE, "iomuxc%d", i);
        create_unimplemented_device(name, FSL_IMX7_IOMUXCn_ADDR[i],
                                    FSL_IMX7_IOMUXCn_SIZE);
    }

    /*
     * CCM
     */
    object_property_set_bool(OBJECT(&s->ccm), true, "realized", &error_abort);
    sysbus_mmio_map(SYS_BUS_DEVICE(&s->ccm), 0, FSL_IMX7_CCM_ADDR);

    /*
     * Analog
     */
    object_property_set_bool(OBJECT(&s->analog), true, "realized",
                             &error_abort);
    sysbus_mmio_map(SYS_BUS_DEVICE(&s->analog), 0, FSL_IMX7_ANALOG_ADDR);

    /*
     * GPCv2
     */
    object_property_set_bool(OBJECT(&s->gpcv2), true,
                             "realized", &error_abort);
    sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpcv2), 0, FSL_IMX7_GPC_ADDR);

    /* Initialize all ECSPI */
    for (i = 0; i < FSL_IMX7_NUM_ECSPIS; i++) {
        static const hwaddr FSL_IMX7_SPIn_ADDR[FSL_IMX7_NUM_ECSPIS] = {
            FSL_IMX7_ECSPI1_ADDR,
            FSL_IMX7_ECSPI2_ADDR,
            FSL_IMX7_ECSPI3_ADDR,
            FSL_IMX7_ECSPI4_ADDR,
        };

        static const int FSL_IMX7_SPIn_IRQ[FSL_IMX7_NUM_ECSPIS] = {
            FSL_IMX7_ECSPI1_IRQ,
            FSL_IMX7_ECSPI2_IRQ,
            FSL_IMX7_ECSPI3_IRQ,
            FSL_IMX7_ECSPI4_IRQ,
        };

        /* Initialize the SPI */
        object_property_set_bool(OBJECT(&s->spi[i]), true, "realized",
                                 &error_abort);
        sysbus_mmio_map(SYS_BUS_DEVICE(&s->spi[i]), 0,
                        FSL_IMX7_SPIn_ADDR[i]);
        sysbus_connect_irq(SYS_BUS_DEVICE(&s->spi[i]), 0,
                           qdev_get_gpio_in(DEVICE(&s->a7mpcore),
                                            FSL_IMX7_SPIn_IRQ[i]));
    }

    for (i = 0; i < FSL_IMX7_NUM_I2CS; i++) {
        static const hwaddr FSL_IMX7_I2Cn_ADDR[FSL_IMX7_NUM_I2CS] = {
            FSL_IMX7_I2C1_ADDR,
            FSL_IMX7_I2C2_ADDR,
            FSL_IMX7_I2C3_ADDR,
            FSL_IMX7_I2C4_ADDR,
        };

        static const int FSL_IMX7_I2Cn_IRQ[FSL_IMX7_NUM_I2CS] = {
            FSL_IMX7_I2C1_IRQ,
            FSL_IMX7_I2C2_IRQ,
            FSL_IMX7_I2C3_IRQ,
            FSL_IMX7_I2C4_IRQ,
        };

        object_property_set_bool(OBJECT(&s->i2c[i]), true, "realized",
                                 &error_abort);
        sysbus_mmio_map(SYS_BUS_DEVICE(&s->i2c[i]), 0, FSL_IMX7_I2Cn_ADDR[i]);

        sysbus_connect_irq(SYS_BUS_DEVICE(&s->i2c[i]), 0,
                           qdev_get_gpio_in(DEVICE(&s->a7mpcore),
                                            FSL_IMX7_I2Cn_IRQ[i]));
    }

    /*
     * UART
     */
    for (i = 0; i < FSL_IMX7_NUM_UARTS; i++) {
        static const hwaddr FSL_IMX7_UARTn_ADDR[FSL_IMX7_NUM_UARTS] = {
            FSL_IMX7_UART1_ADDR,
            FSL_IMX7_UART2_ADDR,
            FSL_IMX7_UART3_ADDR,
            FSL_IMX7_UART4_ADDR,
            FSL_IMX7_UART5_ADDR,
            FSL_IMX7_UART6_ADDR,
            FSL_IMX7_UART7_ADDR,
        };

        static const int FSL_IMX7_UARTn_IRQ[FSL_IMX7_NUM_UARTS] = {
            FSL_IMX7_UART1_IRQ,
            FSL_IMX7_UART2_IRQ,
            FSL_IMX7_UART3_IRQ,
            FSL_IMX7_UART4_IRQ,
            FSL_IMX7_UART5_IRQ,
            FSL_IMX7_UART6_IRQ,
            FSL_IMX7_UART7_IRQ,
        };


        qdev_prop_set_chr(DEVICE(&s->uart[i]), "chardev", serial_hd(i));

        object_property_set_bool(OBJECT(&s->uart[i]), true, "realized",
                                 &error_abort);

        sysbus_mmio_map(SYS_BUS_DEVICE(&s->uart[i]), 0, FSL_IMX7_UARTn_ADDR[i]);

        irq = qdev_get_gpio_in(DEVICE(&s->a7mpcore), FSL_IMX7_UARTn_IRQ[i]);
        sysbus_connect_irq(SYS_BUS_DEVICE(&s->uart[i]), 0, irq);
    }

    /*
     * Ethernet
     */
    for (i = 0; i < FSL_IMX7_NUM_ETHS; i++) {
        static const hwaddr FSL_IMX7_ENETn_ADDR[FSL_IMX7_NUM_ETHS] = {
            FSL_IMX7_ENET1_ADDR,
            FSL_IMX7_ENET2_ADDR,
        };

        object_property_set_uint(OBJECT(&s->eth[i]), FSL_IMX7_ETH_NUM_TX_RINGS,
                                 "tx-ring-num", &error_abort);
        qdev_set_nic_properties(DEVICE(&s->eth[i]), &nd_table[i]);
        object_property_set_bool(OBJECT(&s->eth[i]), true, "realized",
                                 &error_abort);

        sysbus_mmio_map(SYS_BUS_DEVICE(&s->eth[i]), 0, FSL_IMX7_ENETn_ADDR[i]);

        irq = qdev_get_gpio_in(DEVICE(&s->a7mpcore), FSL_IMX7_ENET_IRQ(i, 0));
        sysbus_connect_irq(SYS_BUS_DEVICE(&s->eth[i]), 0, irq);
        irq = qdev_get_gpio_in(DEVICE(&s->a7mpcore), FSL_IMX7_ENET_IRQ(i, 3));
        sysbus_connect_irq(SYS_BUS_DEVICE(&s->eth[i]), 1, irq);
    }

    /*
     * USDHC
     */
    for (i = 0; i < FSL_IMX7_NUM_USDHCS; i++) {
        static const hwaddr FSL_IMX7_USDHCn_ADDR[FSL_IMX7_NUM_USDHCS] = {
            FSL_IMX7_USDHC1_ADDR,
            FSL_IMX7_USDHC2_ADDR,
            FSL_IMX7_USDHC3_ADDR,
        };

        static const int FSL_IMX7_USDHCn_IRQ[FSL_IMX7_NUM_USDHCS] = {
            FSL_IMX7_USDHC1_IRQ,
            FSL_IMX7_USDHC2_IRQ,
            FSL_IMX7_USDHC3_IRQ,
        };

        object_property_set_bool(OBJECT(&s->usdhc[i]), true, "realized",
                                 &error_abort);

        sysbus_mmio_map(SYS_BUS_DEVICE(&s->usdhc[i]), 0,
                        FSL_IMX7_USDHCn_ADDR[i]);

        irq = qdev_get_gpio_in(DEVICE(&s->a7mpcore), FSL_IMX7_USDHCn_IRQ[i]);
        sysbus_connect_irq(SYS_BUS_DEVICE(&s->usdhc[i]), 0, irq);
    }

    /*
     * SNVS
     */
    object_property_set_bool(OBJECT(&s->snvs), true, "realized", &error_abort);
    sysbus_mmio_map(SYS_BUS_DEVICE(&s->snvs), 0, FSL_IMX7_SNVS_ADDR);

    /*
     * SRC
     */
    create_unimplemented_device("src", FSL_IMX7_SRC_ADDR, FSL_IMX7_SRC_SIZE);

    /*
     * Watchdog
     */
    for (i = 0; i < FSL_IMX7_NUM_WDTS; i++) {
        static const hwaddr FSL_IMX7_WDOGn_ADDR[FSL_IMX7_NUM_WDTS] = {
            FSL_IMX7_WDOG1_ADDR,
            FSL_IMX7_WDOG2_ADDR,
            FSL_IMX7_WDOG3_ADDR,
            FSL_IMX7_WDOG4_ADDR,
        };

        object_property_set_bool(OBJECT(&s->wdt[i]), true, "realized",
                                 &error_abort);

        sysbus_mmio_map(SYS_BUS_DEVICE(&s->wdt[i]), 0, FSL_IMX7_WDOGn_ADDR[i]);
    }

    /*
     * SDMA
     */
    create_unimplemented_device("sdma", FSL_IMX7_SDMA_ADDR, FSL_IMX7_SDMA_SIZE);


    object_property_set_bool(OBJECT(&s->gpr), true, "realized",
                             &error_abort);
    sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpr), 0, FSL_IMX7_GPR_ADDR);

    object_property_set_bool(OBJECT(&s->pcie), true,
                             "realized", &error_abort);
    sysbus_mmio_map(SYS_BUS_DEVICE(&s->pcie), 0, FSL_IMX7_PCIE_REG_ADDR);

    irq = qdev_get_gpio_in(DEVICE(&s->a7mpcore), FSL_IMX7_PCI_INTA_IRQ);
    sysbus_connect_irq(SYS_BUS_DEVICE(&s->pcie), 0, irq);
    irq = qdev_get_gpio_in(DEVICE(&s->a7mpcore), FSL_IMX7_PCI_INTB_IRQ);
    sysbus_connect_irq(SYS_BUS_DEVICE(&s->pcie), 1, irq);
    irq = qdev_get_gpio_in(DEVICE(&s->a7mpcore), FSL_IMX7_PCI_INTC_IRQ);
    sysbus_connect_irq(SYS_BUS_DEVICE(&s->pcie), 2, irq);
    irq = qdev_get_gpio_in(DEVICE(&s->a7mpcore), FSL_IMX7_PCI_INTD_IRQ);
    sysbus_connect_irq(SYS_BUS_DEVICE(&s->pcie), 3, irq);


    for (i = 0; i < FSL_IMX7_NUM_USBS; i++) {
        static const hwaddr FSL_IMX7_USBMISCn_ADDR[FSL_IMX7_NUM_USBS] = {
            FSL_IMX7_USBMISC1_ADDR,
            FSL_IMX7_USBMISC2_ADDR,
            FSL_IMX7_USBMISC3_ADDR,
        };

        static const hwaddr FSL_IMX7_USBn_ADDR[FSL_IMX7_NUM_USBS] = {
            FSL_IMX7_USB1_ADDR,
            FSL_IMX7_USB2_ADDR,
            FSL_IMX7_USB3_ADDR,
        };

        static const int FSL_IMX7_USBn_IRQ[FSL_IMX7_NUM_USBS] = {
            FSL_IMX7_USB1_IRQ,
            FSL_IMX7_USB2_IRQ,
            FSL_IMX7_USB3_IRQ,
        };

        object_property_set_bool(OBJECT(&s->usb[i]), true, "realized",
                                 &error_abort);
        sysbus_mmio_map(SYS_BUS_DEVICE(&s->usb[i]), 0,
                        FSL_IMX7_USBn_ADDR[i]);

        irq = qdev_get_gpio_in(DEVICE(&s->a7mpcore), FSL_IMX7_USBn_IRQ[i]);
        sysbus_connect_irq(SYS_BUS_DEVICE(&s->usb[i]), 0, irq);

        snprintf(name, NAME_SIZE, "usbmisc%d", i);
        create_unimplemented_device(name, FSL_IMX7_USBMISCn_ADDR[i],
                                    FSL_IMX7_USBMISCn_SIZE);
    }

    /*
     * ADCs
     */
    for (i = 0; i < FSL_IMX7_NUM_ADCS; i++) {
        static const hwaddr FSL_IMX7_ADCn_ADDR[FSL_IMX7_NUM_ADCS] = {
            FSL_IMX7_ADC1_ADDR,
            FSL_IMX7_ADC2_ADDR,
        };

        snprintf(name, NAME_SIZE, "adc%d", i);
        create_unimplemented_device(name, FSL_IMX7_ADCn_ADDR[i],
                                    FSL_IMX7_ADCn_SIZE);
    }

    /*
     * LCD
     */
    create_unimplemented_device("lcdif", FSL_IMX7_LCDIF_ADDR,
                                FSL_IMX7_LCDIF_SIZE);
}