static int cw_init(struct cw_battery *cw_bat)
{
int ret;
int i;
u8 reg_val = MODE_SLEEP;
#if 0
ret = cw_read(cw_bat->client, REG_MODE, ®_val);
if (ret < 0)
return ret;
#endif
if ((reg_val & MODE_SLEEP_MASK) == MODE_SLEEP) {
reg_val = MODE_NORMAL;
ret = cw_write(cw_bat->client, REG_MODE, ®_val);
if (ret < 0)
return ret;
}
ret = cw_read(cw_bat->client, REG_CONFIG, ®_val);
if (ret < 0)
return ret;
if ((reg_val & 0xf8) != ATHD) {
dev_info(&cw_bat->client->dev, "the new ATHD have not set\n");
reg_val &= 0x07; /* clear ATHD */
reg_val |= ATHD; /* set ATHD */
ret = cw_write(cw_bat->client, REG_CONFIG, ®_val);
if (ret < 0)
return ret;
}
ret = cw_read(cw_bat->client, REG_CONFIG, ®_val);
if (ret < 0)
return ret;
if (!(reg_val & CONFIG_UPDATE_FLG)) {
dev_info(&cw_bat->client->dev, "update flag for new battery info have not set\n");
ret = cw_update_config_info(cw_bat);
if (ret < 0)
return ret;
} else {
for(i = 0; i < SIZE_BATINFO; i++) {
ret = cw_read(cw_bat->client, (REG_BATINFO + i), ®_val);
if (ret < 0)
return ret;
if (cw_bat->plat_data->cw_bat_config_info[i] != reg_val)
break;
}
if (i != SIZE_BATINFO) {
dev_info(&cw_bat->client->dev, "update flag for new battery info have not set\n");
ret = cw_update_config_info(cw_bat);
if (ret < 0)
return ret;
}
}
for (i = 0; i < 30; i++) {
ret = cw_read(cw_bat->client, REG_SOC, ®_val);
if (ret < 0)
return ret;
else if (ret != 0xff)
break;
msleep(100);
if (i > 25)
dev_err(&cw_bat->client->dev, "cw2015/cw2013 input unvalid power error\n");
}
return 0;
}
static int cw_get_capacity(struct cw_battery *cw_bat)
{
int ret;
u8 reg_val[2];
struct timespec ts;
long new_run_time;
long new_sleep_time;
long capacity_or_aconline_time;
int allow_change;
int allow_capacity;
static int if_quickstart;
static int jump_flag;
static int jump_flag2;
static int reset_loop;
int charge_time;
u8 reset_val;
ret = cw_i2c_read(cw_bat->client, REG_SOC, reg_val, 2);
if (ret < 0)
return ret;
cw_capacity = reg_val[0];
if ((cw_capacity < 0) || (cw_capacity > 100)) {
dev_err(&cw_bat->client->dev, "get cw_capacity error; cw_capacity = %d\n", cw_capacity);
reset_loop++;
if (reset_loop > 5) {
reset_val = MODE_SLEEP;
ret = cw_i2c_write(cw_bat->client, REG_MODE, &reset_val, 1);
if (ret < 0)
return ret;
reset_val = MODE_NORMAL;
msleep(10);
ret = cw_i2c_write(cw_bat->client, REG_MODE, &reset_val, 1);
if (ret < 0)
return ret;
dev_dbg(&cw_bat->client->dev, "report battery capacity error");
ret = cw_update_config_info(cw_bat);
if (ret)
return ret;
reset_loop = 0;
}
return cw_capacity;
} else {
reset_loop = 0;
}
if (cw_capacity == 0)
dev_dbg(&cw_bat->client->dev, "the cw201x capacity is 0 !!!!!!!, funciton: %s, line: %d\n", __func__, __LINE__);
else
dev_dbg(&cw_bat->client->dev, "the cw201x capacity is %d, funciton: %s\n", cw_capacity, __func__);
ktime_get_ts(&ts);
new_run_time = ts.tv_sec;
get_monotonic_boottime(&ts);
new_sleep_time = ts.tv_sec - new_run_time;
if (((cw_bat->charger_mode > 0) && (cw_capacity <= (cw_bat->capacity - 1)) && (cw_capacity > (cw_bat->capacity - 30/*9*/)))
|| ((cw_bat->charger_mode == 0) && (cw_capacity == (cw_bat->capacity + 1)))) {
if (!(cw_capacity == 0 && cw_bat->capacity <= 2)) {
cw_capacity = cw_bat->capacity;
}
}
if ((cw_bat->charger_mode > 0) && (cw_capacity >= 95) && (cw_capacity <= cw_bat->capacity)) {
capacity_or_aconline_time = (cw_bat->sleep_time_capacity_change > cw_bat->sleep_time_charge_start) ? cw_bat->sleep_time_capacity_change : cw_bat->sleep_time_charge_start;
capacity_or_aconline_time += (cw_bat->run_time_capacity_change > cw_bat->run_time_charge_start) ? cw_bat->run_time_capacity_change : cw_bat->run_time_charge_start;
allow_change = (new_sleep_time + new_run_time - capacity_or_aconline_time) / BATTERY_UP_MAX_CHANGE;
if (allow_change > 0) {
allow_capacity = cw_bat->capacity + allow_change;
cw_capacity = (allow_capacity <= 100) ? allow_capacity : 100;
jump_flag = 1;
} else if (cw_capacity <= cw_bat->capacity) {
cw_capacity = cw_bat->capacity;
}
} else if ((cw_bat->charger_mode == 0) && cw_bat->capacity == 100 && cw_capacity < cw_bat->capacity && jump_flag2 == 0) {
cw_capacity = cw_bat->capacity;
jump_flag2 = 1;
} else if ((cw_bat->charger_mode == 0) && (cw_capacity <= cw_bat->capacity) && (cw_capacity >= 90) && ((jump_flag == 1) || (jump_flag2 == 1))) {
capacity_or_aconline_time = (cw_bat->sleep_time_capacity_change > cw_bat->sleep_time_charge_start) ? cw_bat->sleep_time_capacity_change : cw_bat->sleep_time_charge_start;
capacity_or_aconline_time += (cw_bat->run_time_capacity_change > cw_bat->run_time_charge_start) ? cw_bat->run_time_capacity_change : cw_bat->run_time_charge_start;
allow_change = (new_sleep_time + new_run_time - capacity_or_aconline_time) / BATTERY_DOWN_CHANGE;
if (allow_change > 0) {
allow_capacity = cw_bat->capacity - allow_change;
if (cw_capacity >= allow_capacity) {
jump_flag = 0;
jump_flag2 = 0;
} else {
cw_capacity = (allow_capacity <= 100) ? allow_capacity : 100;
}
} else if (cw_capacity <= cw_bat->capacity) {
cw_capacity = cw_bat->capacity;
}
}
if ((cw_capacity == 0) && (cw_bat->capacity > 1)) {
allow_change = ((new_run_time - cw_bat->run_time_capacity_change) / BATTERY_DOWN_MIN_CHANGE_RUN);
allow_change += ((new_sleep_time - cw_bat->sleep_time_capacity_change) / BATTERY_DOWN_MIN_CHANGE_SLEEP);
allow_capacity = cw_bat->capacity - allow_change;
cw_capacity = (allow_capacity >= cw_capacity) ? allow_capacity : cw_capacity;
dev_dbg(&cw_bat->client->dev, "report GGIC POR happened");
reg_val[0] = MODE_NORMAL;
ret = cw_i2c_write(cw_bat->client, REG_MODE, reg_val, 1);
if (ret < 0)
return ret;
dev_dbg(&cw_bat->client->dev, "report battery capacity jump 0 ");
}
#if 1
if ((cw_bat->charger_mode > 0) && (cw_capacity == 0)) {
charge_time = new_sleep_time + new_run_time - cw_bat->sleep_time_charge_start - cw_bat->run_time_charge_start;
if ((charge_time > BATTERY_DOWN_MAX_CHANGE_RUN_AC_ONLINE) && (if_quickstart == 0)) {
cw_quickstart(cw_bat);
reset_val = MODE_SLEEP;
ret = cw_i2c_write(cw_bat->client, REG_MODE, &reset_val, 1);
if (ret < 0)
return ret;
reset_val = MODE_NORMAL;
msleep(10);
ret = cw_i2c_write(cw_bat->client, REG_MODE, &reset_val, 1);
if (ret < 0)
return ret;
dev_dbg(&cw_bat->client->dev, "report battery capacity error");
ret = cw_update_config_info(cw_bat);
if (ret)
return ret;
dev_dbg(&cw_bat->client->dev, "report battery capacity still 0 if in changing");
if_quickstart = 1;
}
} else if ((if_quickstart == 1) && (cw_bat->charger_mode == 0)) {
if_quickstart = 0;
}
#endif
#ifdef SYSTEM_SHUTDOWN_VOLTAGE
if ((cw_bat->charger_mode == 0) && (cw_capacity <= 20) && (cw_bat->voltage <= SYSTEM_SHUTDOWN_VOLTAGE)) {
if (if_quickstart == 10) {
allow_change = ((new_run_time - cw_bat->run_time_capacity_change) / BATTERY_DOWN_MIN_CHANGE_RUN);
allow_change += ((new_sleep_time - cw_bat->sleep_time_capacity_change) / BATTERY_DOWN_MIN_CHANGE_SLEEP);
allow_capacity = cw_bat->capacity - allow_change;
cw_capacity = (allow_capacity >= 0) ? allow_capacity : 0;
if (cw_capacity < 1) {
cw_quickstart(cw_bat);
if_quickstart = 12;
cw_capacity = 0;
}
} else if (if_quickstart <= 10)
if_quickstart = if_quickstart+2;
dev_dbg(&cw_bat->client->dev, "the cw201x voltage is less than SYSTEM_SHUTDOWN_VOLTAGE !!!!!!!, funciton: %s, line: %d\n", __func__, __LINE__);
} else if ((cw_bat->charger_mode > 0) && (if_quickstart <= 12)) {
if_quickstart = 0;
}
#endif
return cw_capacity;
}
