static int cx18_s_audio_sampling_freq(struct cx2341x_handler *cxhdl, u32 idx)
{
static const u32 freqs[3] = { 44100, 48000, 32000 };
struct cx18 *cx = container_of(cxhdl, struct cx18, cxhdl);
/* The audio clock of the digitizer must match the codec sample
rate otherwise you get some very strange effects. */
if (idx < ARRAY_SIZE(freqs))
cx18_call_all(cx, audio, s_clock_freq, freqs[idx]);
return 0;
}
static int cx18_s_audio_sampling_freq(struct cx2341x_handler *cxhdl, u32 idx)
{
static const u32 freqs[3] = { 44100, 48000, 32000 };
struct cx18 *cx = container_of(cxhdl, struct cx18, cxhdl);
/*
*/
if (idx < ARRAY_SIZE(freqs))
cx18_call_all(cx, audio, s_clock_freq, freqs[idx]);
return 0;
}
static int cx18_serialized_open(struct cx18_stream *s, struct file *filp)
{
struct cx18 *cx = s->cx;
struct cx18_open_id *item;
CX18_DEBUG_FILE("open %s\n", s->name);
/* Allocate memory */
item = kmalloc(sizeof(struct cx18_open_id), GFP_KERNEL);
if (NULL == item) {
CX18_DEBUG_WARN("nomem on v4l2 open\n");
return -ENOMEM;
}
item->cx = cx;
item->type = s->type;
v4l2_prio_open(&cx->prio, &item->prio);
item->open_id = cx->open_id++;
filp->private_data = item;
if (item->type == CX18_ENC_STREAM_TYPE_RAD) {
/* Try to claim this stream */
if (cx18_claim_stream(item, item->type)) {
/* No, it's already in use */
kfree(item);
return -EBUSY;
}
if (!test_bit(CX18_F_I_RADIO_USER, &cx->i_flags)) {
if (atomic_read(&cx->ana_capturing) > 0) {
/* switching to radio while capture is
in progress is not polite */
cx18_release_stream(s);
kfree(item);
return -EBUSY;
}
}
/* Mark that the radio is being used. */
set_bit(CX18_F_I_RADIO_USER, &cx->i_flags);
/* We have the radio */
cx18_mute(cx);
/* Switch tuner to radio */
cx18_call_all(cx, tuner, s_radio);
/* Select the correct audio input (i.e. radio tuner) */
cx18_audio_set_io(cx);
/* Done! Unmute and continue. */
cx18_unmute(cx);
}
return 0;
}
int cx18_v4l2_close(struct file *filp)
{
struct cx18_open_id *id = filp->private_data;
struct cx18 *cx = id->cx;
struct cx18_stream *s = &cx->streams[id->type];
CX18_DEBUG_IOCTL("close() of %s\n", s->name);
v4l2_prio_close(&cx->prio, &id->prio);
/* Easy case first: this stream was never claimed by us */
if (s->id != id->open_id) {
kfree(id);
return 0;
}
/* 'Unclaim' this stream */
/* Stop radio */
mutex_lock(&cx->serialize_lock);
if (id->type == CX18_ENC_STREAM_TYPE_RAD) {
/* Closing radio device, return to TV mode */
cx18_mute(cx);
/* Mark that the radio is no longer in use */
clear_bit(CX18_F_I_RADIO_USER, &cx->i_flags);
/* Switch tuner to TV */
cx18_call_all(cx, core, s_std, cx->std);
/* Select correct audio input (i.e. TV tuner or Line in) */
cx18_audio_set_io(cx);
if (atomic_read(&cx->ana_capturing) > 0) {
/* Undo video mute */
cx18_vapi(cx, CX18_CPU_SET_VIDEO_MUTE, 2, s->handle,
cx->params.video_mute |
(cx->params.video_mute_yuv << 8));
}
/* Done! Unmute and continue. */
cx18_unmute(cx);
cx18_release_stream(s);
} else {
cx18_stop_capture(id, 0);
}
kfree(id);
mutex_unlock(&cx->serialize_lock);
return 0;
}
static void cx18_dualwatch(struct cx18 *cx)
{
struct v4l2_tuner vt;
u32 new_stereo_mode;
const u32 dual = 0x0200;
new_stereo_mode = v4l2_ctrl_g_ctrl(cx->cxhdl.audio_mode);
memset(&vt, 0, sizeof(vt));
cx18_call_all(cx, tuner, g_tuner, &vt);
if (vt.audmode == V4L2_TUNER_MODE_LANG1_LANG2 &&
(vt.rxsubchans & V4L2_TUNER_SUB_LANG2))
new_stereo_mode = dual;
if (new_stereo_mode == cx->dualwatch_stereo_mode)
return;
CX18_DEBUG_INFO("dualwatch: change stereo flag from 0x%x to 0x%x.\n",
cx->dualwatch_stereo_mode, new_stereo_mode);
if (v4l2_ctrl_s_ctrl(cx->cxhdl.audio_mode, new_stereo_mode))
CX18_DEBUG_INFO("dualwatch: changing stereo flag failed\n");
}
static void cx18_dualwatch(struct cx18 *cx)
{
struct v4l2_tuner vt;
u32 new_bitmap;
u32 new_stereo_mode;
const u32 stereo_mask = 0x0300;
const u32 dual = 0x0200;
u32 h;
new_stereo_mode = cx->params.audio_properties & stereo_mask;
memset(&vt, 0, sizeof(vt));
cx18_call_all(cx, tuner, g_tuner, &vt);
if (vt.audmode == V4L2_TUNER_MODE_LANG1_LANG2 &&
(vt.rxsubchans & V4L2_TUNER_SUB_LANG2))
new_stereo_mode = dual;
if (new_stereo_mode == cx->dualwatch_stereo_mode)
return;
new_bitmap = new_stereo_mode
| (cx->params.audio_properties & ~stereo_mask);
CX18_DEBUG_INFO("dualwatch: change stereo flag from 0x%x to 0x%x. "
"new audio_bitmask=0x%ux\n",
cx->dualwatch_stereo_mode, new_stereo_mode, new_bitmap);
h = cx18_find_handle(cx);
if (h == CX18_INVALID_TASK_HANDLE) {
CX18_DEBUG_INFO("dualwatch: can't find valid task handle\n");
return;
}
if (cx18_vapi(cx,
CX18_CPU_SET_AUDIO_PARAMETERS, 2, h, new_bitmap) == 0) {
cx->dualwatch_stereo_mode = new_stereo_mode;
return;
}
CX18_DEBUG_INFO("dualwatch: changing stereo flag failed\n");
}
int cx18_s_ext_ctrls(struct file *file, void *fh, struct v4l2_ext_controls *c)
{
struct cx18_open_id *id = fh;
struct cx18 *cx = id->cx;
int ret;
struct v4l2_control ctrl;
ret = v4l2_prio_check(&cx->prio, id->prio);
if (ret)
return ret;
if (c->ctrl_class == V4L2_CTRL_CLASS_USER) {
int i;
int err = 0;
for (i = 0; i < c->count; i++) {
ctrl.id = c->controls[i].id;
ctrl.value = c->controls[i].value;
err = cx18_s_ctrl(cx, &ctrl);
c->controls[i].value = ctrl.value;
if (err) {
c->error_idx = i;
break;
}
}
return err;
}
if (c->ctrl_class == V4L2_CTRL_CLASS_MPEG) {
static u32 freqs[3] = { 44100, 48000, 32000 };
struct cx18_api_func_private priv;
struct cx2341x_mpeg_params p = cx->params;
int err = cx2341x_ext_ctrls(&p, atomic_read(&cx->ana_capturing),
c, VIDIOC_S_EXT_CTRLS);
unsigned int idx;
if (err)
return err;
if (p.video_encoding != cx->params.video_encoding) {
int is_mpeg1 = p.video_encoding ==
V4L2_MPEG_VIDEO_ENCODING_MPEG_1;
struct v4l2_mbus_framefmt fmt;
/* fix videodecoder resolution */
fmt.width = cx->params.width / (is_mpeg1 ? 2 : 1);
fmt.height = cx->params.height;
fmt.code = V4L2_MBUS_FMT_FIXED;
v4l2_subdev_call(cx->sd_av, video, s_mbus_fmt, &fmt);
}
priv.cx = cx;
priv.s = &cx->streams[id->type];
err = cx2341x_update(&priv, cx18_api_func, &cx->params, &p);
if (!err &&
(cx->params.stream_vbi_fmt != p.stream_vbi_fmt ||
cx->params.stream_type != p.stream_type))
err = cx18_setup_vbi_fmt(cx, p.stream_vbi_fmt,
p.stream_type);
cx->params = p;
cx->dualwatch_stereo_mode = p.audio_properties & 0x0300;
idx = p.audio_properties & 0x03;
/* The audio clock of the digitizer must match the codec sample
rate otherwise you get some very strange effects. */
if (idx < ARRAY_SIZE(freqs))
cx18_call_all(cx, audio, s_clock_freq, freqs[idx]);
return err;
}
return -EINVAL;
}
static int __devinit cx18_probe(struct pci_dev *pci_dev,
const struct pci_device_id *pci_id)
{
int retval = 0;
int i;
u32 devtype;
struct cx18 *cx;
/* FIXME - module parameter arrays constrain max instances */
i = atomic_inc_return(&cx18_instance) - 1;
if (i >= CX18_MAX_CARDS) {
printk(KERN_ERR "cx18: cannot manage card %d, driver has a "
"limit of 0 - %d\n", i, CX18_MAX_CARDS - 1);
return -ENOMEM;
}
cx = kzalloc(sizeof(struct cx18), GFP_ATOMIC);
if (cx == NULL) {
printk(KERN_ERR "cx18: cannot manage card %d, out of memory\n",
i);
return -ENOMEM;
}
cx->pci_dev = pci_dev;
cx->instance = i;
retval = v4l2_device_register(&pci_dev->dev, &cx->v4l2_dev);
if (retval) {
printk(KERN_ERR "cx18: v4l2_device_register of card %d failed"
"\n", cx->instance);
kfree(cx);
return retval;
}
snprintf(cx->v4l2_dev.name, sizeof(cx->v4l2_dev.name), "cx18-%d",
cx->instance);
CX18_INFO("Initializing card %d\n", cx->instance);
cx18_process_options(cx);
if (cx->options.cardtype == -1) {
retval = -ENODEV;
goto err;
}
retval = cx18_init_struct1(cx);
if (retval)
goto err;
CX18_DEBUG_INFO("base addr: 0x%08x\n", cx->base_addr);
/* PCI Device Setup */
retval = cx18_setup_pci(cx, pci_dev, pci_id);
if (retval != 0)
goto free_workqueues;
/* map io memory */
CX18_DEBUG_INFO("attempting ioremap at 0x%08x len 0x%08x\n",
cx->base_addr + CX18_MEM_OFFSET, CX18_MEM_SIZE);
cx->enc_mem = ioremap_nocache(cx->base_addr + CX18_MEM_OFFSET,
CX18_MEM_SIZE);
if (!cx->enc_mem) {
CX18_ERR("ioremap failed. Can't get a window into CX23418 "
"memory and register space\n");
CX18_ERR("Each capture card with a CX23418 needs 64 MB of "
"vmalloc address space for the window\n");
CX18_ERR("Check the output of 'grep Vmalloc /proc/meminfo'\n");
CX18_ERR("Use the vmalloc= kernel command line option to set "
"VmallocTotal to a larger value\n");
retval = -ENOMEM;
goto free_mem;
}
cx->reg_mem = cx->enc_mem + CX18_REG_OFFSET;
devtype = cx18_read_reg(cx, 0xC72028);
switch (devtype & 0xff000000) {
case 0xff000000:
CX18_INFO("cx23418 revision %08x (A)\n", devtype);
break;
case 0x01000000:
CX18_INFO("cx23418 revision %08x (B)\n", devtype);
break;
default:
CX18_INFO("cx23418 revision %08x (Unknown)\n", devtype);
break;
}
cx18_init_power(cx, 1);
cx18_init_memory(cx);
cx->scb = (struct cx18_scb __iomem *)(cx->enc_mem + SCB_OFFSET);
cx18_init_scb(cx);
cx18_gpio_init(cx);
/* Initialize integrated A/V decoder early to set PLLs, just in case */
retval = cx18_av_probe(cx);
if (retval) {
CX18_ERR("Could not register A/V decoder subdevice\n");
goto free_map;
}
/* Initialize GPIO Reset Controller to do chip resets during i2c init */
if (cx->card->hw_all & CX18_HW_GPIO_RESET_CTRL) {
if (cx18_gpio_register(cx, CX18_HW_GPIO_RESET_CTRL) != 0)
CX18_WARN("Could not register GPIO reset controller"
"subdevice; proceeding anyway.\n");
else
cx->hw_flags |= CX18_HW_GPIO_RESET_CTRL;
}
/* active i2c */
CX18_DEBUG_INFO("activating i2c...\n");
retval = init_cx18_i2c(cx);
if (retval) {
CX18_ERR("Could not initialize i2c\n");
goto free_map;
}
if (cx->card->hw_all & CX18_HW_TVEEPROM) {
/* Based on the model number the cardtype may be changed.
The PCI IDs are not always reliable. */
const struct cx18_card *orig_card = cx->card;
cx18_process_eeprom(cx);
if (cx->card != orig_card) {
/* Changed the cardtype; re-reset the I2C chips */
cx18_gpio_init(cx);
cx18_call_hw(cx, CX18_HW_GPIO_RESET_CTRL,
core, reset, (u32) CX18_GPIO_RESET_I2C);
}
}
if (cx->card->comment)
CX18_INFO("%s", cx->card->comment);
if (cx->card->v4l2_capabilities == 0) {
retval = -ENODEV;
goto free_i2c;
}
cx18_init_memory(cx);
cx18_init_scb(cx);
/* Register IRQ */
retval = request_irq(cx->pci_dev->irq, cx18_irq_handler,
IRQF_SHARED | IRQF_DISABLED,
cx->v4l2_dev.name, (void *)cx);
if (retval) {
CX18_ERR("Failed to register irq %d\n", retval);
goto free_i2c;
}
if (cx->std == 0)
cx->std = V4L2_STD_NTSC_M;
if (cx->options.tuner == -1) {
for (i = 0; i < CX18_CARD_MAX_TUNERS; i++) {
if ((cx->std & cx->card->tuners[i].std) == 0)
continue;
cx->options.tuner = cx->card->tuners[i].tuner;
break;
}
}
/* if no tuner was found, then pick the first tuner in the card list */
if (cx->options.tuner == -1 && cx->card->tuners[0].std) {
cx->std = cx->card->tuners[0].std;
if (cx->std & V4L2_STD_PAL)
cx->std = V4L2_STD_PAL_BG | V4L2_STD_PAL_H;
else if (cx->std & V4L2_STD_NTSC)
cx->std = V4L2_STD_NTSC_M;
else if (cx->std & V4L2_STD_SECAM)
cx->std = V4L2_STD_SECAM_L;
cx->options.tuner = cx->card->tuners[0].tuner;
}
if (cx->options.radio == -1)
cx->options.radio = (cx->card->radio_input.audio_type != 0);
/* The card is now fully identified, continue with card-specific
initialization. */
cx18_init_struct2(cx);
cx18_init_subdevs(cx);
if (cx->std & V4L2_STD_525_60)
cx->is_60hz = 1;
else
cx->is_50hz = 1;
cx2341x_handler_set_50hz(&cx->cxhdl, !cx->is_60hz);
if (cx->options.radio > 0)
cx->v4l2_cap |= V4L2_CAP_RADIO;
if (cx->options.tuner > -1) {
struct tuner_setup setup;
setup.addr = ADDR_UNSET;
setup.type = cx->options.tuner;
setup.mode_mask = T_ANALOG_TV; /* matches TV tuners */
setup.tuner_callback = (setup.type == TUNER_XC2028) ?
cx18_reset_tuner_gpio : NULL;
cx18_call_all(cx, tuner, s_type_addr, &setup);
if (setup.type == TUNER_XC2028) {
static struct xc2028_ctrl ctrl = {
.fname = XC2028_DEFAULT_FIRMWARE,
.max_len = 64,
};
struct v4l2_priv_tun_config cfg = {
.tuner = cx->options.tuner,
.priv = &ctrl,
};
cx18_call_all(cx, tuner, s_config, &cfg);
}
}
/* The tuner is fixed to the standard. The other inputs (e.g. S-Video)
are not. */
cx->tuner_std = cx->std;
if (cx->std == V4L2_STD_ALL)
cx->std = V4L2_STD_NTSC_M;
retval = cx18_streams_setup(cx);
if (retval) {
CX18_ERR("Error %d setting up streams\n", retval);
goto free_irq;
}
retval = cx18_streams_register(cx);
if (retval) {
CX18_ERR("Error %d registering devices\n", retval);
goto free_streams;
}
CX18_INFO("Initialized card: %s\n", cx->card_name);
/* Load cx18 submodules (cx18-alsa) */
request_modules(cx);
return 0;
free_streams:
cx18_streams_cleanup(cx, 1);
free_irq:
free_irq(cx->pci_dev->irq, (void *)cx);
free_i2c:
exit_cx18_i2c(cx);
free_map:
cx18_iounmap(cx);
free_mem:
release_mem_region(cx->base_addr, CX18_MEM_SIZE);
free_workqueues:
destroy_workqueue(cx->in_work_queue);
err:
if (retval == 0)
retval = -ENODEV;
CX18_ERR("Error %d on initialization\n", retval);
v4l2_device_unregister(&cx->v4l2_dev);
kfree(cx);
return retval;
}
int cx18_init_on_first_open(struct cx18 *cx)
{
int video_input;
int fw_retry_count = 3;
struct v4l2_frequency vf;
struct cx18_open_id fh;
v4l2_std_id std;
fh.cx = cx;
if (test_bit(CX18_F_I_FAILED, &cx->i_flags))
return -ENXIO;
if (test_and_set_bit(CX18_F_I_INITED, &cx->i_flags))
return 0;
while (--fw_retry_count > 0) {
/* load firmware */
if (cx18_firmware_init(cx) == 0)
break;
if (fw_retry_count > 1)
CX18_WARN("Retry loading firmware\n");
}
if (fw_retry_count == 0) {
set_bit(CX18_F_I_FAILED, &cx->i_flags);
return -ENXIO;
}
set_bit(CX18_F_I_LOADED_FW, &cx->i_flags);
/*
* Init the firmware twice to work around a silicon bug
* with the digital TS.
*
* The second firmware load requires us to normalize the APU state,
* or the audio for the first analog capture will be badly incorrect.
*
* I can't seem to call APU_RESETAI and have it succeed without the
* APU capturing audio, so we start and stop it here to do the reset
*/
/* MPEG Encoding, 224 kbps, MPEG Layer II, 48 ksps */
cx18_vapi(cx, CX18_APU_START, 2, CX18_APU_ENCODING_METHOD_MPEG|0xb9, 0);
cx18_vapi(cx, CX18_APU_RESETAI, 0);
cx18_vapi(cx, CX18_APU_STOP, 1, CX18_APU_ENCODING_METHOD_MPEG);
fw_retry_count = 3;
while (--fw_retry_count > 0) {
/* load firmware */
if (cx18_firmware_init(cx) == 0)
break;
if (fw_retry_count > 1)
CX18_WARN("Retry loading firmware\n");
}
if (fw_retry_count == 0) {
set_bit(CX18_F_I_FAILED, &cx->i_flags);
return -ENXIO;
}
/*
* The second firmware load requires us to normalize the APU state,
* or the audio for the first analog capture will be badly incorrect.
*
* I can't seem to call APU_RESETAI and have it succeed without the
* APU capturing audio, so we start and stop it here to do the reset
*/
/* MPEG Encoding, 224 kbps, MPEG Layer II, 48 ksps */
cx18_vapi(cx, CX18_APU_START, 2, CX18_APU_ENCODING_METHOD_MPEG|0xb9, 0);
cx18_vapi(cx, CX18_APU_RESETAI, 0);
cx18_vapi(cx, CX18_APU_STOP, 1, CX18_APU_ENCODING_METHOD_MPEG);
/* Init the A/V decoder, if it hasn't been already */
v4l2_subdev_call(cx->sd_av, core, load_fw);
vf.tuner = 0;
vf.type = V4L2_TUNER_ANALOG_TV;
vf.frequency = 6400; /* the tuner 'baseline' frequency */
/* Set initial frequency. For PAL/SECAM broadcasts no
'default' channel exists AFAIK. */
if (cx->std == V4L2_STD_NTSC_M_JP)
vf.frequency = 1460; /* ch. 1 91250*16/1000 */
else if (cx->std & V4L2_STD_NTSC_M)
vf.frequency = 1076; /* ch. 4 67250*16/1000 */
video_input = cx->active_input;
cx->active_input++; /* Force update of input */
cx18_s_input(NULL, &fh, video_input);
/* Let the VIDIOC_S_STD ioctl do all the work, keeps the code
in one place. */
cx->std++; /* Force full standard initialization */
std = (cx->tuner_std == V4L2_STD_ALL) ? V4L2_STD_NTSC_M : cx->tuner_std;
cx18_s_std(NULL, &fh, &std);
cx18_s_frequency(NULL, &fh, &vf);
return 0;
}
static void cx18_cancel_in_work_orders(struct cx18 *cx)
{
int i;
for (i = 0; i < CX18_MAX_IN_WORK_ORDERS; i++)
cancel_work_sync(&cx->in_work_order[i].work);
}
static int __devinit cx18_probe(struct pci_dev *pci_dev,
const struct pci_device_id *pci_id)
{
int retval = 0;
int i;
u32 devtype;
struct cx18 *cx;
i = atomic_inc_return(&cx18_instance) - 1;
if (i >= CX18_MAX_CARDS) {
printk(KERN_ERR "cx18: cannot manage card %d, driver has a "
"limit of 0 - %d\n", i, CX18_MAX_CARDS - 1);
return -ENOMEM;
}
cx = kzalloc(sizeof(struct cx18), GFP_ATOMIC);
if (cx == NULL) {
printk(KERN_ERR "cx18: cannot manage card %d, out of memory\n",
i);
return -ENOMEM;
}
cx->pci_dev = pci_dev;
cx->instance = i;
retval = v4l2_device_register(&pci_dev->dev, &cx->v4l2_dev);
if (retval) {
printk(KERN_ERR "cx18: v4l2_device_register of card %d failed"
"\n", cx->instance);
kfree(cx);
return retval;
}
snprintf(cx->v4l2_dev.name, sizeof(cx->v4l2_dev.name), "cx18-%d",
cx->instance);
CX18_INFO("Initializing card %d\n", cx->instance);
cx18_process_options(cx);
if (cx->options.cardtype == -1) {
retval = -ENODEV;
goto err;
}
retval = cx18_init_struct1(cx);
if (retval)
goto err;
CX18_DEBUG_INFO("base addr: 0x%08x\n", cx->base_addr);
retval = cx18_setup_pci(cx, pci_dev, pci_id);
if (retval != 0)
goto free_workqueues;
CX18_DEBUG_INFO("attempting ioremap at 0x%08x len 0x%08x\n",
cx->base_addr + CX18_MEM_OFFSET, CX18_MEM_SIZE);
cx->enc_mem = ioremap_nocache(cx->base_addr + CX18_MEM_OFFSET,
CX18_MEM_SIZE);
if (!cx->enc_mem) {
CX18_ERR("ioremap failed, perhaps increasing __VMALLOC_RESERVE in page.h\n");
CX18_ERR("or disabling CONFIG_HIGHMEM4G into the kernel would help\n");
retval = -ENOMEM;
goto free_mem;
}
cx->reg_mem = cx->enc_mem + CX18_REG_OFFSET;
devtype = cx18_read_reg(cx, 0xC72028);
switch (devtype & 0xff000000) {
case 0xff000000:
CX18_INFO("cx23418 revision %08x (A)\n", devtype);
break;
case 0x01000000:
CX18_INFO("cx23418 revision %08x (B)\n", devtype);
break;
default:
CX18_INFO("cx23418 revision %08x (Unknown)\n", devtype);
break;
}
cx18_init_power(cx, 1);
cx18_init_memory(cx);
cx->scb = (struct cx18_scb __iomem *)(cx->enc_mem + SCB_OFFSET);
cx18_init_scb(cx);
cx18_gpio_init(cx);
retval = cx18_av_probe(cx);
if (retval) {
CX18_ERR("Could not register A/V decoder subdevice\n");
goto free_map;
}
cx18_call_hw(cx, CX18_HW_418_AV, core, init, 0);
if (cx->card->hw_all & CX18_HW_GPIO_RESET_CTRL) {
if (cx18_gpio_register(cx, CX18_HW_GPIO_RESET_CTRL) != 0)
CX18_WARN("Could not register GPIO reset controller"
"subdevice; proceeding anyway.\n");
else
cx->hw_flags |= CX18_HW_GPIO_RESET_CTRL;
}
CX18_DEBUG_INFO("activating i2c...\n");
retval = init_cx18_i2c(cx);
if (retval) {
CX18_ERR("Could not initialize i2c\n");
goto free_map;
}
if (cx->card->hw_all & CX18_HW_TVEEPROM) {
cx18_process_eeprom(cx);
}
if (cx->card->comment)
CX18_INFO("%s", cx->card->comment);
if (cx->card->v4l2_capabilities == 0) {
retval = -ENODEV;
goto free_i2c;
}
cx18_init_memory(cx);
cx18_init_scb(cx);
retval = request_irq(cx->pci_dev->irq, cx18_irq_handler,
IRQF_SHARED | IRQF_DISABLED,
cx->v4l2_dev.name, (void *)cx);
if (retval) {
CX18_ERR("Failed to register irq %d\n", retval);
goto free_i2c;
}
if (cx->std == 0)
cx->std = V4L2_STD_NTSC_M;
if (cx->options.tuner == -1) {
for (i = 0; i < CX18_CARD_MAX_TUNERS; i++) {
if ((cx->std & cx->card->tuners[i].std) == 0)
continue;
cx->options.tuner = cx->card->tuners[i].tuner;
break;
}
}
if (cx->options.tuner == -1 && cx->card->tuners[0].std) {
cx->std = cx->card->tuners[0].std;
if (cx->std & V4L2_STD_PAL)
cx->std = V4L2_STD_PAL_BG | V4L2_STD_PAL_H;
else if (cx->std & V4L2_STD_NTSC)
cx->std = V4L2_STD_NTSC_M;
else if (cx->std & V4L2_STD_SECAM)
cx->std = V4L2_STD_SECAM_L;
cx->options.tuner = cx->card->tuners[0].tuner;
}
if (cx->options.radio == -1)
cx->options.radio = (cx->card->radio_input.audio_type != 0);
cx18_init_struct2(cx);
cx18_init_subdevs(cx);
if (cx->std & V4L2_STD_525_60)
cx->is_60hz = 1;
else
cx->is_50hz = 1;
cx->params.video_gop_size = cx->is_60hz ? 15 : 12;
if (cx->options.radio > 0)
cx->v4l2_cap |= V4L2_CAP_RADIO;
if (cx->options.tuner > -1) {
struct tuner_setup setup;
setup.addr = ADDR_UNSET;
setup.type = cx->options.tuner;
setup.mode_mask = T_ANALOG_TV;
setup.tuner_callback = (setup.type == TUNER_XC2028) ?
cx18_reset_tuner_gpio : NULL;
cx18_call_all(cx, tuner, s_type_addr, &setup);
if (setup.type == TUNER_XC2028) {
static struct xc2028_ctrl ctrl = {
.fname = XC2028_DEFAULT_FIRMWARE,
.max_len = 64,
};
struct v4l2_priv_tun_config cfg = {
.tuner = cx->options.tuner,
.priv = &ctrl,
};
cx18_call_all(cx, tuner, s_config, &cfg);
}
}
cx->tuner_std = cx->std;
retval = cx18_streams_setup(cx);
if (retval) {
CX18_ERR("Error %d setting up streams\n", retval);
goto free_irq;
}
retval = cx18_streams_register(cx);
if (retval) {
CX18_ERR("Error %d registering devices\n", retval);
goto free_streams;
}
CX18_INFO("Initialized card: %s\n", cx->card_name);
return 0;
free_streams:
cx18_streams_cleanup(cx, 1);
free_irq:
free_irq(cx->pci_dev->irq, (void *)cx);
free_i2c:
exit_cx18_i2c(cx);
free_map:
cx18_iounmap(cx);
free_mem:
release_mem_region(cx->base_addr, CX18_MEM_SIZE);
free_workqueues:
destroy_workqueue(cx->in_work_queue);
destroy_workqueue(cx->out_work_queue);
err:
if (retval == 0)
retval = -ENODEV;
CX18_ERR("Error %d on initialization\n", retval);
v4l2_device_unregister(&cx->v4l2_dev);
kfree(cx);
return retval;
}
int cx18_init_on_first_open(struct cx18 *cx)
{
int video_input;
int fw_retry_count = 3;
struct v4l2_frequency vf;
struct cx18_open_id fh;
fh.cx = cx;
if (test_bit(CX18_F_I_FAILED, &cx->i_flags))
return -ENXIO;
if (test_and_set_bit(CX18_F_I_INITED, &cx->i_flags))
return 0;
while (--fw_retry_count > 0) {
if (cx18_firmware_init(cx) == 0)
break;
if (fw_retry_count > 1)
CX18_WARN("Retry loading firmware\n");
}
if (fw_retry_count == 0) {
set_bit(CX18_F_I_FAILED, &cx->i_flags);
return -ENXIO;
}
set_bit(CX18_F_I_LOADED_FW, &cx->i_flags);
cx18_vapi(cx, CX18_APU_START, 2, CX18_APU_ENCODING_METHOD_MPEG|0xb9, 0);
cx18_vapi(cx, CX18_APU_RESETAI, 0);
cx18_vapi(cx, CX18_APU_STOP, 1, CX18_APU_ENCODING_METHOD_MPEG);
fw_retry_count = 3;
while (--fw_retry_count > 0) {
if (cx18_firmware_init(cx) == 0)
break;
if (fw_retry_count > 1)
CX18_WARN("Retry loading firmware\n");
}
if (fw_retry_count == 0) {
set_bit(CX18_F_I_FAILED, &cx->i_flags);
return -ENXIO;
}
cx18_vapi(cx, CX18_APU_START, 2, CX18_APU_ENCODING_METHOD_MPEG|0xb9, 0);
cx18_vapi(cx, CX18_APU_RESETAI, 0);
cx18_vapi(cx, CX18_APU_STOP, 1, CX18_APU_ENCODING_METHOD_MPEG);
v4l2_subdev_call(cx->sd_av, core, load_fw);
vf.tuner = 0;
vf.type = V4L2_TUNER_ANALOG_TV;
vf.frequency = 6400;
if (cx->std == V4L2_STD_NTSC_M_JP)
vf.frequency = 1460;
else if (cx->std & V4L2_STD_NTSC_M)
vf.frequency = 1076;
video_input = cx->active_input;
cx->active_input++;
cx18_s_input(NULL, &fh, video_input);
cx->std++;
cx18_s_std(NULL, &fh, &cx->tuner_std);
cx18_s_frequency(NULL, &fh, &vf);
return 0;
}
static void cx18_cancel_in_work_orders(struct cx18 *cx)
{
int i;
for (i = 0; i < CX18_MAX_IN_WORK_ORDERS; i++)
cancel_work_sync(&cx->in_work_order[i].work);
}
