static int allocate_divider(I2cDividerType divider)
{
I2cDividerInfo *p_div = &i2c_dividers[divider];
if (p_div->div_num == CY_INVALID_DIVIDER) {
p_div->div_num = cy_clk_allocate_divider(CY_SYSCLK_DIV_8_BIT);
if (p_div->div_num != CY_INVALID_DIVIDER) {
p_div->div_type = CY_SYSCLK_DIV_8_BIT;
} else {
p_div->div_num = cy_clk_allocate_divider(CY_SYSCLK_DIV_16_BIT);
if (p_div->div_num != CY_INVALID_DIVIDER) {
p_div->div_type = CY_SYSCLK_DIV_16_BIT;
}
}
}
if (p_div->div_num != CY_INVALID_DIVIDER) {
// Set up proper frequency;
uint32_t div_value = cy_PeriClkFreqHz / p_div->clk_frequency;
p_div->clk_frequency = cy_PeriClkFreqHz / div_value;
if (Cy_SysClk_PeriphSetDivider(p_div->div_type, p_div->div_num, div_value) == CY_SYSCLK_SUCCESS) {
Cy_SysClk_PeriphEnableDivider(p_div->div_type, p_div->div_num);
} else {
p_div->div_num = CY_INVALID_DIVIDER;
}
}
return (p_div->div_num == CY_INVALID_DIVIDER) ? -1 : 0;
}
static int allocate_divider(spi_obj_t *obj)
{
if (obj->div_num == CY_INVALID_DIVIDER) {
obj->div_type = CY_SYSCLK_DIV_16_BIT;
obj->div_num = cy_clk_allocate_divider(CY_SYSCLK_DIV_16_BIT);
}
return (obj->div_num == CY_INVALID_DIVIDER)? -1 : 0;
}
void pwmout_init(pwmout_t *obj, PinName pin)
{
uint32_t pwm_cnt = 0;
uint32_t pwm_function = 0;
uint32_t abs_cnt_num = 0;
MBED_ASSERT(obj);
MBED_ASSERT(pin != (PinName)NC);
// Allocate and setup clock.
if (pwm_clock_divider == CY_INVALID_DIVIDER) {
pwm_clock_divider = cy_clk_allocate_divider(CY_SYSCLK_DIV_8_BIT);
if (pwm_clock_divider == CY_INVALID_DIVIDER) {
error("PWM clock divider allocation failed.");
return;
}
Cy_SysClk_PeriphSetDivider(CY_SYSCLK_DIV_8_BIT,
pwm_clock_divider,
(CY_CLK_PERICLK_FREQ_HZ / PWMOUT_BASE_CLOCK_HZ) - 1);
Cy_SysClk_PeriphEnableDivider(CY_SYSCLK_DIV_8_BIT, pwm_clock_divider);
}
pwm_cnt = pinmap_peripheral(pin, PinMap_PWM_OUT);
if (pwm_cnt != (uint32_t)NC) {
if (cy_reserve_io_pin(pin)) {
error("PWMOUT pin reservation conflict.");
}
obj->base = (TCPWM_Type*)CY_PERIPHERAL_BASE(pwm_cnt);
obj->pin = pin;
if (obj->base == TCPWM0) {
obj->counter_id = ((PWMName)pwm_cnt - PWM_32b_0) / (PWM_32b_1 - PWM_32b_0);
abs_cnt_num = obj->counter_id;
} else {
// TCPWM1 is used.
obj->counter_id = ((PWMName)pwm_cnt - PWM_16b_0) / (PWM_16b_1 - PWM_16b_0);
abs_cnt_num = obj->counter_id + 8;
}
if (cy_reserve_tcpwm(abs_cnt_num)) {
error("PWMOUT Timer/Counter reservation conflict.");
}
// Configure clock.
pwm_function = pinmap_function(pin, PinMap_PWM_OUT);
obj->clock = CY_PIN_CLOCK(pwm_function);
Cy_SysClk_PeriphAssignDivider(obj->clock, CY_SYSCLK_DIV_8_BIT, pwm_clock_divider);
Cy_TCPWM_PWM_Init(obj->base, obj->counter_id, &pwm_config);
pin_function(pin, pwm_function);
// These will be properly configured later on.
obj->period = 0;
obj->pulse_width = 0;
obj->prescaler = 0;
#if DEVICE_SLEEP && DEVICE_LPTICKER
obj->pm_callback_handler.callback = pwm_pm_callback;
obj->pm_callback_handler.type = CY_SYSPM_DEEPSLEEP;
obj->pm_callback_handler.skipMode = 0;
obj->pm_callback_handler.callbackParams = &obj->pm_callback_params;
obj->pm_callback_params.base = obj->base;
obj->pm_callback_params.context = obj;
if (!Cy_SysPm_RegisterCallback(&obj->pm_callback_handler)) {
error("PM callback registration failed!");
}
#endif // DEVICE_SLEEP && DEVICE_LPTICKER
} else {
error("PWM OUT pinout mismatch.");
}
}
