static int cupid_devices_init(void)
{
uint32_t reg;
gpio_direction_output(GPIO_LCD_ENABLE, 0);
gpio_direction_output(GPIO_LCD_BACKLIGHT, 0);
reg = readl(IMX_CCM_BASE + CCM_RCSR);
/* some fuses provide us vital information about connected hardware */
if (reg & 0x20000000)
nand_info.width = 2; /* 16 bit */
else
nand_info.width = 1; /* 8 bit */
imx35_add_fec(&fec_info);
imx35_add_nand(&nand_info);
devfs_add_partition("nand0", 0x00000, 0x40000, PARTITION_FIXED, "self_raw");
dev_add_bb_dev("self_raw", "self0");
devfs_add_partition("nand0", 0x40000, 0x80000, PARTITION_FIXED, "env_raw");
dev_add_bb_dev("env_raw", "env0");
imx35_add_fb(&ipu_fb_data);
imx35_add_mmc0(NULL);
armlinux_set_bootparams((void *)0x80000100);
armlinux_set_architecture(MACH_TYPE_GUF_CUPID);
return 0;
}
static int pcm049_devices_init(void)
{
i2c_register_board_info(0, i2c_devices, ARRAY_SIZE(i2c_devices));
add_generic_device("i2c-omap", -1, NULL, 0x48070000, 0x1000,
IORESOURCE_MEM, NULL);
add_generic_device("omap-hsmmc", -1, NULL, 0x4809C100, SZ_4K,
IORESOURCE_MEM, NULL);
gpmc_generic_init(0x10);
pcm049_network_init();
gpmc_generic_nand_devices_init(0, 8, OMAP_ECC_BCH8_CODE_HW);
#ifdef CONFIG_PARTITION
devfs_add_partition("nand0", 0x00000, SZ_128K, PARTITION_FIXED, "xload_raw");
dev_add_bb_dev("xload_raw", "xload");
devfs_add_partition("nand0", SZ_128K, SZ_256K, PARTITION_FIXED, "self_raw");
dev_add_bb_dev("self_raw", "self0");
devfs_add_partition("nand0", SZ_128K + SZ_256K, SZ_128K, PARTITION_FIXED, "env_raw");
dev_add_bb_dev("env_raw", "env0");
#endif
armlinux_set_bootparams((void *)0x80000100);
armlinux_set_architecture(MACH_TYPE_PCM049);
return 0;
}
static int nhk8815_devices_init(void)
{
writel(0xC37800F0, NOMADIK_GPIO1_BASE + 0x20);
writel(0x00000000, NOMADIK_GPIO1_BASE + 0x24);
writel(0x00000000, NOMADIK_GPIO1_BASE + 0x28);
writel(readl(NOMADIK_SRC_BASE) | 0x8000, NOMADIK_SRC_BASE);
/* Set up SMCS1 for Ethernet: sram-like, enabled, timing values */
writel(0x0000305b, FSMC_BCR(1));
writel(0x00033f33, FSMC_BTR(1));
add_generic_device("smc91c111", DEVICE_ID_DYNAMIC, NULL, 0x34000300, 16,
IORESOURCE_MEM, NULL);
platform_device_register(&nhk8815_nand_device);
armlinux_set_architecture(MACH_TYPE_NOMADIK);
armlinux_set_bootparams((void *)(0x00000100));
devfs_add_partition("nand0", 0x0000000, 0x040000, DEVFS_PARTITION_FIXED, "xloader_raw");
devfs_add_partition("nand0", 0x0040000, 0x080000, DEVFS_PARTITION_FIXED, "meminit_raw");
devfs_add_partition("nand0", 0x0080000, 0x200000, DEVFS_PARTITION_FIXED, "self_raw");
dev_add_bb_dev("self_raw", "self0");
devfs_add_partition("nand0", 0x7FE0000, 0x020000, DEVFS_PARTITION_FIXED, "env_raw");
dev_add_bb_dev("env_raw", "env0");
return 0;
}
static int at91sam9n12ek_devices_init(void)
{
ek_add_device_spi();
ek_add_device_nand();
ek_add_device_mci();
ek_add_led();
at91_add_device_udc(&ek_udc_data);
ek_add_device_i2c();
ek_add_device_ks8851();
ek_add_device_buttons();
ek_add_device_lcdc();
armlinux_set_architecture(CONFIG_MACH_AT91SAM9N12EK);
devfs_add_partition("nand0", 0x00000, SZ_256K, DEVFS_PARTITION_FIXED, "at91bootstrap_raw");
dev_add_bb_dev("at91bootstrap_raw", "at91bootstrap");
devfs_add_partition("nand0", SZ_256K, SZ_256K + SZ_128K, DEVFS_PARTITION_FIXED, "self_raw");
dev_add_bb_dev("self_raw", "self0");
devfs_add_partition("nand0", SZ_512K + SZ_128K, SZ_128K, DEVFS_PARTITION_FIXED, "env_raw");
dev_add_bb_dev("env_raw", "env0");
devfs_add_partition("nand0", SZ_512K + SZ_256K, SZ_128K, DEVFS_PARTITION_FIXED, "env_raw1");
dev_add_bb_dev("env_raw1", "env1");
return 0;
}
static int tx25_devices_init(void)
{
gpio_fec_active();
imx25_iim_register_fec_ethaddr();
imx25_add_fec(&fec_info);
if (readl(MX25_CCM_BASE_ADDR + MX25_CCM_RCSR) & (1 << 14))
nand_info.width = 2;
imx25_add_nand(&nand_info);
devfs_add_partition("nand0", 0x00000, SZ_512K, DEVFS_PARTITION_FIXED, "self_raw");
dev_add_bb_dev("self_raw", "self0");
devfs_add_partition("nand0", SZ_512K, SZ_512K, DEVFS_PARTITION_FIXED, "env_raw");
dev_add_bb_dev("env_raw", "env0");
add_mem_device("sram0", 0x78000000, 128 * 1024,
IORESOURCE_MEM_WRITEABLE);
armlinux_set_bootparams((void *)0x80000100);
armlinux_set_architecture(MACH_TYPE_TX25);
armlinux_set_serial(imx_uid());
return 0;
}
static int pcm049_devices_init(void)
{
i2c_register_board_info(0, i2c_devices, ARRAY_SIZE(i2c_devices));
omap44xx_add_i2c1(NULL);
omap44xx_add_mmc1(NULL);
gpmc_generic_init(0x10);
pcm049_network_init();
omap_add_gpmc_nand_device(&nand_plat);
#ifdef CONFIG_PARTITION
devfs_add_partition("nand0", 0x00000, SZ_128K, DEVFS_PARTITION_FIXED, "xload_raw");
dev_add_bb_dev("xload_raw", "xload");
devfs_add_partition("nand0", SZ_128K, SZ_512K, DEVFS_PARTITION_FIXED, "self_raw");
dev_add_bb_dev("self_raw", "self0");
devfs_add_partition("nand0", SZ_128K + SZ_512K, SZ_128K, DEVFS_PARTITION_FIXED, "env_raw");
dev_add_bb_dev("env_raw", "env0");
#endif
armlinux_set_bootparams((void *)0x80000100);
armlinux_set_architecture(MACH_TYPE_PCM049);
return 0;
}
static int usb_a9260_devices_init(void)
{
usb_a9260_add_device_nand();
usb_a9260_add_device_mci();
usb_a9260_add_device_eth();
usb_a9260_add_spi();
usb_a9260_add_device_usb();
ek_add_device_udc();
ek_add_led();
ek_add_device_button();
usb_a9260_device_dab_mmx();
usb_a9260_set_board_type();
devfs_add_partition("nand0", 0x00000, SZ_128K, DEVFS_PARTITION_FIXED, "at91bootstrap_raw");
dev_add_bb_dev("at91bootstrap_raw", "at91bootstrap");
devfs_add_partition("nand0", SZ_128K, SZ_256K, DEVFS_PARTITION_FIXED, "self_raw");
dev_add_bb_dev("self_raw", "self0");
devfs_add_partition("nand0", SZ_256K + SZ_128K, SZ_128K, DEVFS_PARTITION_FIXED, "env_raw");
dev_add_bb_dev("env_raw", "env0");
devfs_add_partition("nand0", SZ_512K, SZ_128K, DEVFS_PARTITION_FIXED, "env_raw1");
dev_add_bb_dev("env_raw1", "env1");
return 0;
}
static int at91sam9x5ek_devices_init(void)
{
ek_add_device_w1();
ek_add_device_nand();
ek_add_device_eth();
ek_add_device_spi();
ek_add_device_mci();
ek_add_device_usb();
ek_add_led();
ek_add_device_i2c();
ek_add_device_lcdc();
armlinux_set_architecture(CONFIG_MACH_AT91SAM9X5EK);
devfs_add_partition("nand0", 0x00000, SZ_256K, DEVFS_PARTITION_FIXED, "at91bootstrap_raw");
dev_add_bb_dev("at91bootstrap_raw", "at91bootstrap");
devfs_add_partition("nand0", SZ_256K, SZ_256K + SZ_128K, DEVFS_PARTITION_FIXED, "self_raw");
dev_add_bb_dev("self_raw", "self0");
devfs_add_partition("nand0", SZ_512K + SZ_128K, SZ_128K, DEVFS_PARTITION_FIXED, "env_raw");
dev_add_bb_dev("env_raw", "env0");
devfs_add_partition("nand0", SZ_512K + SZ_256K, SZ_128K, DEVFS_PARTITION_FIXED, "env_raw1");
dev_add_bb_dev("env_raw1", "env1");
if (IS_ENABLED(CONFIG_DEFAULT_ENVIRONMENT_GENERIC))
defaultenv_append_directory(defaultenv_at91sam9x5ek);
return 0;
}
static int at91sam9261ek_devices_init(void)
{
ek_add_device_nand();
ek_add_device_dm9000();
ek_add_device_udc();
ek_add_device_buttons();
ek_device_add_leds();
devfs_add_partition("nand0", 0x00000, SZ_128K, DEVFS_PARTITION_FIXED, "at91bootstrap_raw");
devfs_add_partition("nand0", SZ_128K, SZ_256K, DEVFS_PARTITION_FIXED, "self_raw");
dev_add_bb_dev("self_raw", "self0");
devfs_add_partition("nand0", SZ_256K + SZ_128K, SZ_128K, DEVFS_PARTITION_FIXED, "env_raw");
dev_add_bb_dev("env_raw", "env0");
devfs_add_partition("nand0", SZ_512K, SZ_128K, DEVFS_PARTITION_FIXED, "env_raw1");
dev_add_bb_dev("env_raw1", "env1");
armlinux_set_bootparams((void *)(AT91_CHIPSELECT_1 + 0x100));
if (machine_is_at91sam9g10ek())
armlinux_set_architecture(MACH_TYPE_AT91SAM9G10EK);
else
armlinux_set_architecture(MACH_TYPE_AT91SAM9261EK);
return 0;
}
static int imx25_3ds_devices_init(void)
{
#ifdef CONFIG_USB
/* USB does not work yet. Don't know why. Maybe
* the CPLD has to be initialized.
*/
imx25_usb_init();
add_generic_usb_ehci_device(DEVICE_ID_DYNAMIC, MX25_USB_OTG_BASE_ADDR + 0x400, NULL);
#endif
imx25_iim_register_fec_ethaddr();
imx25_add_fec(&fec_info);
add_mem_device("sram0", 0x78000000, 128 * 1024, IORESOURCE_MEM_WRITEABLE);
if (readl(MX25_CCM_BASE_ADDR + MX25_CCM_RCSR) & (1 << 14))
nand_info.width = 2;
imx25_add_nand(&nand_info);
devfs_add_partition("nand0", 0x00000, 0x40000, DEVFS_PARTITION_FIXED, "self_raw");
dev_add_bb_dev("self_raw", "self0");
devfs_add_partition("nand0", 0x40000, 0x20000, DEVFS_PARTITION_FIXED, "env_raw");
dev_add_bb_dev("env_raw", "env0");
i2c_register_board_info(0, i2c_devices, ARRAY_SIZE(i2c_devices));
imx25_add_i2c0(NULL);
armlinux_set_architecture(MACH_TYPE_MX25_3DS);
armlinux_set_serial(imx_uid());
return 0;
}
static int at91sam9m10g45ek_devices_init(void)
{
ek_add_device_nand();
ek_add_device_spi();
at91_add_device_eth(0, &macb_pdata);
ek_add_device_mci();
ek_add_device_usb();
ek_device_add_leds();
ek_device_add_keyboard();
ek_add_device_lcdc();
devfs_add_partition("nand0", 0x00000, SZ_128K, DEVFS_PARTITION_FIXED, "at91bootstrap_raw");
dev_add_bb_dev("at91bootstrap_raw", "at91bootstrap");
devfs_add_partition("nand0", SZ_128K, SZ_256K, DEVFS_PARTITION_FIXED, "self_raw");
dev_add_bb_dev("self_raw", "self0");
devfs_add_partition("nand0", SZ_256K + SZ_128K, SZ_128K, DEVFS_PARTITION_FIXED, "env_raw");
dev_add_bb_dev("env_raw", "env0");
devfs_add_partition("nand0", SZ_512K, SZ_128K, DEVFS_PARTITION_FIXED, "env_raw1");
dev_add_bb_dev("env_raw1", "env1");
armlinux_set_bootparams((void *)(AT91_CHIPSELECT_6 + 0x100));
armlinux_set_architecture(MACH_TYPE_AT91SAM9M10G45EK);
ek_set_board_revision();
return 0;
}
static int vincell_devices_init(void)
{
writel(0, MX53_M4IF_BASE_ADDR + 0xc);
console_flush();
imx53_init_lowlevel(1000);
clk_set_rate(clk_lookup("nfc_podf"), 66666667);
imx53_add_nand(&nand_info);
imx51_iim_register_fec_ethaddr();
imx53_add_fec(&fec_info);
imx53_add_mmc0(NULL);
i2c_register_board_info(0, i2c_devices, ARRAY_SIZE(i2c_devices));
imx53_add_i2c0(NULL);
vincell_fec_reset();
armlinux_set_bootparams((void *)0x70000100);
armlinux_set_architecture(3297);
devfs_add_partition("nand0", SZ_1M, SZ_512K, DEVFS_PARTITION_FIXED, "self_raw");
dev_add_bb_dev("self_raw", "self0");
devfs_add_partition("nand0", SZ_1M + SZ_512K, SZ_512K, DEVFS_PARTITION_FIXED, "env_raw");
dev_add_bb_dev("env_raw", "env0");
imx53_bbu_internal_nand_register_handler("nand",
BBU_HANDLER_FLAG_DEFAULT, dcd_entry, sizeof(dcd_entry), 3 * SZ_128K, 0xf8020000);
return 0;
}
static int at91sam9m10ihd_devices_init(void)
{
ek_add_device_w1();
ek_add_device_nand();
ek_add_device_eth();
ek_add_device_mci();
ek_add_device_spi();
ek_add_device_i2c();
ek_add_device_usb();
ek_add_device_lcd();
devfs_add_partition("nand0", 0x00000, SZ_128K, DEVFS_PARTITION_FIXED, "at91bootstrap_raw");
dev_add_bb_dev("at91bootstrap_raw", "at91bootstrap");
devfs_add_partition("nand0", SZ_128K, SZ_256K, DEVFS_PARTITION_FIXED, "self_raw");
dev_add_bb_dev("self_raw", "self0");
devfs_add_partition("nand0", SZ_256K + SZ_128K, SZ_128K, DEVFS_PARTITION_FIXED, "env_raw");
dev_add_bb_dev("env_raw", "env0");
devfs_add_partition("nand0", SZ_512K, SZ_128K, DEVFS_PARTITION_FIXED, "env_raw1");
dev_add_bb_dev("env_raw1", "env1");
/*
* The internal Atmel kernel use the SAM9M10G45EK machine id
* The mainline use DT
*/
armlinux_set_architecture(MACH_TYPE_AT91SAM9M10G45EK);
return 0;
}
static int nhk8815_devices_init(void)
{
st8815_add_device_sdram(64 * 1024 *1024);
writel(0xC37800F0, NOMADIK_GPIO1_BASE + 0x20);
writel(0x00000000, NOMADIK_GPIO1_BASE + 0x24);
writel(0x00000000, NOMADIK_GPIO1_BASE + 0x28);
writel(readl(NOMADIK_SRC_BASE) | 0x8000, NOMADIK_SRC_BASE);
/* Set up SMCS1 for Ethernet: sram-like, enabled, timing values */
writel(0x0000305b, FSMC_BCR(1));
writel(0x00033f33, FSMC_BTR(1));
register_device(&nhk8815_network_dev);
register_device(&nhk8815_nand_device);
armlinux_set_architecture(MACH_TYPE_NOMADIK);
armlinux_set_bootparams((void *)(0x00000100));
devfs_add_partition("nand0", 0x0000000, 0x040000, PARTITION_FIXED, "xloader_raw");
devfs_add_partition("nand0", 0x0040000, 0x080000, PARTITION_FIXED, "meminit_raw");
devfs_add_partition("nand0", 0x0080000, 0x200000, PARTITION_FIXED, "self_raw");
dev_add_bb_dev("self_raw", "self0");
devfs_add_partition("nand0", 0x7FE0000, 0x020000, PARTITION_FIXED, "env_raw");
dev_add_bb_dev("env_raw", "env0");
return 0;
}
static int eukrea_cpuimx25_devices_init(void)
{
eukrea_cpuimx25_mmu_init();
mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx25_pads,
ARRAY_SIZE(eukrea_cpuimx25_pads));
register_device(&fec_dev);
nand_info.width = 1;
register_device(&nand_dev);
devfs_add_partition("nand0", 0x00000, 0x40000,
PARTITION_FIXED, "self_raw");
dev_add_bb_dev("self_raw", "self0");
devfs_add_partition("nand0", 0x40000, 0x20000,
PARTITION_FIXED, "env_raw");
dev_add_bb_dev("env_raw", "env0");
register_device(&sdram0_dev);
/* enable LCD */
gpio_direction_output(26, 1);
gpio_set_value(26, 1);
register_device(&imxfb_dev);
armlinux_add_dram(&sdram0_dev);
armlinux_set_bootparams((void *)0x80000100);
armlinux_set_architecture(MACH_TYPE_EUKREA_CPUIMX25);
return 0;
}
static int at91sam9260ek_devices_init(void)
{
ek_add_device_nand();
at91sam9260ek_phy_reset();
at91_add_device_eth(0, &macb_pdata);
at91_add_device_usbh_ohci(&ek_usbh_data);
at91_add_device_udc(&ek_udc_data);
ek_usb_add_device_mci();
ek_add_device_buttons();
ek_add_led();
armlinux_set_bootparams((void *)(AT91_CHIPSELECT_1 + 0x100));
ek_set_board_type();
devfs_add_partition("nand0", 0x00000, SZ_128K, DEVFS_PARTITION_FIXED, "at91bootstrap_raw");
dev_add_bb_dev("at91bootstrap_raw", "at91bootstrap");
devfs_add_partition("nand0", SZ_128K, SZ_256K, DEVFS_PARTITION_FIXED, "self_raw");
dev_add_bb_dev("self_raw", "self0");
devfs_add_partition("nand0", SZ_256K + SZ_128K, SZ_128K, DEVFS_PARTITION_FIXED, "env_raw");
dev_add_bb_dev("env_raw", "env0");
devfs_add_partition("nand0", SZ_512K, SZ_128K, DEVFS_PARTITION_FIXED, "env_raw1");
dev_add_bb_dev("env_raw1", "env1");
return 0;
}
static int tny_a9260_devices_init(void)
{
tny_a9260_add_device_nand();
ek_add_device_macb();
ek_add_device_udc();
armlinux_set_bootparams((void *)(AT91_CHIPSELECT_1 + 0x100));
tny_a9260_set_board_type();
if (machine_is_tny_a9260() || machine_is_tny_a9g20()) {
spi_register_board_info(tny_a9g20_spi_devices,
ARRAY_SIZE(tny_a9g20_spi_devices));
at91_add_device_spi(0, &spi_pdata);
}
devfs_add_partition("nand0", 0x00000, SZ_128K, DEVFS_PARTITION_FIXED, "at91bootstrap_raw");
dev_add_bb_dev("at91bootstrap_raw", "at91bootstrap");
devfs_add_partition("nand0", SZ_128K, SZ_256K, DEVFS_PARTITION_FIXED, "self_raw");
dev_add_bb_dev("self_raw", "self0");
devfs_add_partition("nand0", SZ_256K + SZ_128K, SZ_128K, DEVFS_PARTITION_FIXED, "env_raw");
dev_add_bb_dev("env_raw", "env0");
devfs_add_partition("nand0", SZ_512K, SZ_128K, DEVFS_PARTITION_FIXED, "env_raw1");
dev_add_bb_dev("env_raw1", "env1");
return 0;
}
static int pcm049_devices_init(void)
{
i2c_register_board_info(0, i2c_devices, ARRAY_SIZE(i2c_devices));
omap44xx_add_i2c1(NULL);
omap44xx_add_mmc1(NULL);
gpmc_generic_init(0x10);
if (IS_ENABLED(CONFIG_DRIVER_NET_SMC911X))
pcm049_network_init();
omap_add_gpmc_nand_device(&nand_plat);
#ifdef CONFIG_PARTITION
devfs_add_partition("nand0", 0x00000, SZ_128K, DEVFS_PARTITION_FIXED, "xload_raw");
dev_add_bb_dev("xload_raw", "xload");
devfs_add_partition("nand0", SZ_128K, SZ_512K, DEVFS_PARTITION_FIXED, "self_raw");
dev_add_bb_dev("self_raw", "self0");
devfs_add_partition("nand0", SZ_128K + SZ_512K, SZ_128K, DEVFS_PARTITION_FIXED, "env_raw");
dev_add_bb_dev("env_raw", "env0");
#endif
armlinux_set_architecture(MACH_TYPE_PCM049);
if (IS_ENABLED(CONFIG_DRIVER_VIDEO_OMAP))
omap_add_display(&pcm049_fb_data);
return 0;
}
static int pcm043_devices_init(void)
{
uint32_t reg;
char *envstr;
unsigned long bbu_nand_flags = 0;
/* CS0: Nor Flash */
imx35_setup_weimcs(5, 0x22C0CF00, 0x75000D01, 0x00000900);
led_gpio_register(&led0);
reg = readl(MX35_CCM_BASE_ADDR + MX35_CCM_RCSR);
/* some fuses provide us vital information about connected hardware */
if (reg & 0x20000000)
nand_info.width = 2; /* 16 bit */
else
nand_info.width = 1; /* 8 bit */
imx35_add_fec(&fec_info);
/*
* This platform supports NOR and NAND
*/
imx35_add_nand(&nand_info);
/*
* Up to 32MiB NOR type flash, connected to
* CS line 0, data width is 16 bit
*/
add_cfi_flash_device(DEVICE_ID_DYNAMIC, MX35_CS0_BASE_ADDR, 32 * 1024 * 1024, 0);
switch (bootsource_get()) {
case BOOTSOURCE_NAND:
devfs_add_partition("nand0", 0x00000, SZ_512K, DEVFS_PARTITION_FIXED, "self_raw");
dev_add_bb_dev("self_raw", "self0");
devfs_add_partition("nand0", SZ_512K, SZ_256K, DEVFS_PARTITION_FIXED, "env_raw");
dev_add_bb_dev("env_raw", "env0");
envstr = "NAND";
bbu_nand_flags = BBU_HANDLER_FLAG_DEFAULT;
break;
case BOOTSOURCE_NOR:
default:
devfs_add_partition("nor0", 0x00000, SZ_512K, DEVFS_PARTITION_FIXED, "self0"); /* ourself */
devfs_add_partition("nor0", SZ_512K, SZ_128K, DEVFS_PARTITION_FIXED, "env0"); /* environment */
protect_file("/dev/env0", 1);
envstr = "NOR";
break;
}
pr_info("using environment from %s flash\n", envstr);
imx35_add_fb(&ipu_fb_data);
armlinux_set_architecture(MACH_TYPE_PCM043);
imx_bbu_external_nand_register_handler("nand", "/dev/nand0.barebox",
bbu_nand_flags);
return 0;
}
static int tx51_part_init(void)
{
devfs_add_partition("nand0", 0x00000, 0x40000, DEVFS_PARTITION_FIXED, "self_raw");
dev_add_bb_dev("self_raw", "self0");
devfs_add_partition("nand0", 0x40000, 0x80000, DEVFS_PARTITION_FIXED, "env_raw");
dev_add_bb_dev("env_raw", "env0");
return 0;
}
static int f3s_devices_init(void)
{
uint32_t reg;
/* CS0: Nor Flash */
imx35_setup_weimcs(0, 0x0000cf03, 0x10000d03, 0x00720900);
reg = readl(MX35_CCM_BASE_ADDR + MX35_CCM_RCSR);
/* some fuses provide us vital information about connected hardware */
if (reg & 0x20000000)
nand_info.width = 2; /* 16 bit */
else
nand_info.width = 1; /* 8 bit */
/*
* This platform supports NOR and NAND
*/
imx35_add_nand(&nand_info);
add_cfi_flash_device(DEVICE_ID_DYNAMIC, MX35_CS0_BASE_ADDR, 64 * 1024 * 1024, 0);
switch ((reg >> 25) & 0x3) {
case 0x01: /* NAND is the source */
devfs_add_partition("nand0", 0x00000, 0x40000, DEVFS_PARTITION_FIXED, "self_raw");
dev_add_bb_dev("self_raw", "self0");
devfs_add_partition("nand0", 0x40000, 0x80000, DEVFS_PARTITION_FIXED, "env_raw");
dev_add_bb_dev("env_raw", "env0");
break;
case 0x00: /* NOR is the source */
devfs_add_partition("nor0", 0x00000, 0x40000, DEVFS_PARTITION_FIXED, "self0");
devfs_add_partition("nor0", 0x40000, 0x80000, DEVFS_PARTITION_FIXED, "env0");
protect_file("/dev/env0", 1);
break;
}
set_silicon_rev(imx_silicon_revision());
i2c_register_board_info(0, i2c_devices, ARRAY_SIZE(i2c_devices));
imx35_add_i2c0(NULL);
imx35_add_fec(&fec_info);
add_generic_device("smc911x", DEVICE_ID_DYNAMIC, NULL, MX35_CS5_BASE_ADDR, MX35_CS5_SIZE,
IORESOURCE_MEM, NULL);
imx35_add_mmc0(NULL);
imx35_add_fb(&ipu_fb_data);
armlinux_set_bootparams((void *)0x80000100);
armlinux_set_architecture(MACH_TYPE_MX35_3DS);
return 0;
}
static int eukrea_cpuimx25_devices_init(void)
{
mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx25_pads,
ARRAY_SIZE(eukrea_cpuimx25_pads));
led_gpio_register(&led0);
imx25_iim_register_fec_ethaddr();
imx25_add_fec(&fec_info);
nand_info.width = 1;
imx25_add_nand(&nand_info);
devfs_add_partition("nand0", 0x00000, 0x40000,
DEVFS_PARTITION_FIXED, "self_raw");
dev_add_bb_dev("self_raw", "self0");
devfs_add_partition("nand0", 0x40000, 0x20000,
DEVFS_PARTITION_FIXED, "env_raw");
dev_add_bb_dev("env_raw", "env0");
/* enable LCD */
gpio_direction_output(26, 1);
gpio_set_value(26, 1);
/* LED : default OFF */
gpio_direction_output(2 * 32 + 19, 1);
/* Switch : input */
gpio_direction_input(2 * 32 + 18);
imx25_add_fb(&eukrea_cpuimx25_fb_data);
imx25_add_i2c0(NULL);
imx25_add_mmc0(NULL);
#ifdef CONFIG_USB
imx25_usb_init();
add_generic_usb_ehci_device(DEVICE_ID_DYNAMIC, MX25_USB_OTG_BASE_ADDR + 0x400, NULL);
#endif
#ifdef CONFIG_USB_GADGET
/* Workaround ENGcm09152 */
writel(readl(MX25_USB_OTG_BASE_ADDR + 0x608) | (1 << 23), MX25_USB_OTG_BASE_ADDR + 0x608);
add_generic_device("fsl-udc", DEVICE_ID_DYNAMIC, NULL, MX25_USB_OTG_BASE_ADDR, 0x200,
IORESOURCE_MEM, &usb_pdata);
#endif
armlinux_set_bootparams((void *)0x80000100);
armlinux_set_architecture(MACH_TYPE_EUKREA_CPUIMX25SD);
return 0;
}
static int tx53_devices_init(void)
{
const char *envdev;
uint32_t flag_nand = 0;
uint32_t flag_mmc = 0;
if (!of_machine_is_compatible("karo,tx53"))
return 0;
barebox_set_model("Ka-Ro TX53");
barebox_set_hostname("tx53");
switch (bootsource_get()) {
case BOOTSOURCE_MMC:
devfs_add_partition("mmc0", 0x00000, SZ_512K,
DEVFS_PARTITION_FIXED, "self0");
devfs_add_partition("mmc0", SZ_512K, SZ_1M,
DEVFS_PARTITION_FIXED, "env0");
envdev = "MMC";
flag_mmc |= BBU_HANDLER_FLAG_DEFAULT;
break;
case BOOTSOURCE_NAND:
default:
devfs_add_partition("nand0", 0x00000, 0x80000,
DEVFS_PARTITION_FIXED, "self_raw");
dev_add_bb_dev("self_raw", "self0");
devfs_add_partition("nand0", 0x80000, 0x100000,
DEVFS_PARTITION_FIXED, "env_raw");
dev_add_bb_dev("env_raw", "env0");
envdev = "NAND";
flag_nand |= BBU_HANDLER_FLAG_DEFAULT;
break;
}
armlinux_set_architecture(MACH_TYPE_TX53);
/* rev xx30 can boot from nand or USB */
imx53_bbu_internal_nand_register_handler("nand-xx30",
flag_nand, SZ_512K);
/* rev 1011 can boot from MMC/SD, other bootsource currently unknown */
imx53_bbu_internal_mmc_register_handler("mmc-1011",
"/dev/mmc0", flag_mmc);
if (of_machine_is_compatible("karo,tx53-1011"))
imx53_init_lowlevel(1000);
printf("Using environment in %s\n", envdev);
return 0;
}
static int eukrea_cpuimx35_devices_init(void)
{
#ifdef CONFIG_USB_GADGET
unsigned int tmp;
#endif
mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx35_pads,
ARRAY_SIZE(eukrea_cpuimx35_pads));
imx35_add_nand(&nand_info);
devfs_add_partition("nand0", 0x00000, 0x40000, DEVFS_PARTITION_FIXED, "self_raw");
dev_add_bb_dev("self_raw", "self0");
devfs_add_partition("nand0", 0x40000, 0x20000, DEVFS_PARTITION_FIXED, "env_raw");
dev_add_bb_dev("env_raw", "env0");
imx35_add_fec(&fec_info);
imx35_add_fb(&ipu_fb_data);
imx35_add_i2c0(NULL);
imx35_add_mmc0(NULL);
/* led default off */
gpio_direction_output(32 * 2 + 29, 1);
/* Switch : input */
gpio_direction_input(32 * 2 + 25);
/* screen default on to prevent flicker */
gpio_direction_output(4, 0);
/* backlight default off */
gpio_direction_output(1, 0);
#ifdef CONFIG_USB
#ifndef CONFIG_USB_GADGET
imx_add_usb((void *)MX35_USB_OTG_BASE_ADDR, 0, &otg_pdata);
#endif
imx_add_usb((void *)MX35_USB_HS_BASE_ADDR, 1, &hs_pdata);
#endif
#ifdef CONFIG_USB_GADGET
/* Workaround ENGcm09152 */
tmp = readl(MX35_USB_OTG_BASE_ADDR + 0x608);
writel(tmp | (1 << 23), MX35_USB_OTG_BASE_ADDR + 0x608);
add_generic_device("fsl-udc", DEVICE_ID_DYNAMIC, NULL, MX35_USB_OTG_BASE_ADDR, 0x200,
IORESOURCE_MEM, &usb_pdata);
#endif
armlinux_set_architecture(MACH_TYPE_EUKREA_CPUIMX35SD);
return 0;
}
static int pcaal1_late_init(void)
{
#ifdef CONFIG_PARTITION
devfs_add_partition("nand0", 0x00000, SZ_128K, DEVFS_PARTITION_FIXED, "x-loader");
dev_add_bb_dev("self_raw", "x_loader0");
devfs_add_partition("nand0", SZ_128K, SZ_512K, DEVFS_PARTITION_FIXED, "self_raw");
dev_add_bb_dev("self_raw", "self0");
devfs_add_partition("nand0", SZ_128K + SZ_512K, SZ_128K, DEVFS_PARTITION_FIXED, "env_raw");
dev_add_bb_dev("env_raw", "env0");
#endif
return 0;
}
static int mini2440_devices_init(void)
{
uint32_t reg;
int i;
/* ----------- configure the access to the outer space ---------- */
for (i = 0; i < ARRAY_SIZE(pin_usage); i++)
s3c_gpio_mode(pin_usage[i]);
reg = readl(S3C_BWSCON);
/* CS#4 to access the network controller */
reg &= ~0x000f0000;
reg |= 0x000d0000; /* 16 bit */
writel(0x1f4c, S3C_BANKCON4);
writel(reg, S3C_BWSCON);
/* release the reset signal to external devices */
reg = readl(S3C_MISCCR);
reg |= 0x10000;
writel(reg, S3C_MISCCR);
add_generic_device("s3c24x0_nand", DEVICE_ID_DYNAMIC, NULL, S3C24X0_NAND_BASE,
0, IORESOURCE_MEM, &nand_info);
add_dm9000_device(0, S3C_CS4_BASE + 0x300, S3C_CS4_BASE + 0x304,
IORESOURCE_MEM_16BIT, &dm9000_data);
#ifdef CONFIG_NAND
/* ----------- add some vital partitions -------- */
devfs_del_partition("self_raw");
devfs_add_partition("nand0", 0x00000, 0x40000, DEVFS_PARTITION_FIXED, "self_raw");
dev_add_bb_dev("self_raw", "self0");
devfs_del_partition("env_raw");
devfs_add_partition("nand0", 0x40000, 0x20000, DEVFS_PARTITION_FIXED, "env_raw");
dev_add_bb_dev("env_raw", "env0");
#endif
add_generic_device("s3c_mci", 0, NULL, S3C2410_SDI_BASE, 0,
IORESOURCE_MEM, &mci_data);
add_generic_device("s3c_fb", 0, NULL, S3C2410_LCD_BASE, 0,
IORESOURCE_MEM, &s3c24x0_fb_data);
add_generic_device("ohci", 0, NULL, S3C2410_USB_HOST_BASE, 0x100,
IORESOURCE_MEM, NULL);
armlinux_set_bootparams((void*)S3C_SDRAM_BASE + 0x100);
armlinux_set_architecture(MACH_TYPE_MINI2440);
return 0;
}
static int at91sam9m10g45ek_devices_init(void)
{
ek_add_device_nand();
at91_add_device_eth(&macb_pdata);
ek_add_device_mci();
devfs_add_partition("nand0", 0x00000, 0x80000, PARTITION_FIXED, "self_raw");
dev_add_bb_dev("self_raw", "self0");
devfs_add_partition("nand0", 0x80000, 0x20000, PARTITION_FIXED, "env_raw");
dev_add_bb_dev("env_raw", "env0");
armlinux_set_bootparams((void *)(AT91_CHIPSELECT_6 + 0x100));
armlinux_set_architecture(MACH_TYPE_AT91SAM9M10G45EK);
ek_set_board_revision();
return 0;
}
static int mini2440_devices_init(void)
{
uint32_t reg;
int i;
/* ----------- configure the access to the outer space ---------- */
for (i = 0; i < ARRAY_SIZE(pin_usage); i++)
s3c_gpio_mode(pin_usage[i]);
reg = readl(S3C_BWSCON);
/* CS#4 to access the network controller */
reg &= ~0x000f0000;
reg |= 0x000d0000; /* 16 bit */
writel(0x1f4c, S3C_BANKCON4);
writel(reg, S3C_BWSCON);
/* release the reset signal to external devices */
reg = readl(S3C_MISCCR);
reg |= 0x10000;
writel(reg, S3C_MISCCR);
s3c24xx_add_nand(&nand_info);
add_dm9000_device(0, S3C_CS4_BASE + 0x300, S3C_CS4_BASE + 0x304,
IORESOURCE_MEM_16BIT, &dm9000_data);
#ifdef CONFIG_NAND
/* ----------- add some vital partitions -------- */
devfs_del_partition("self_raw");
devfs_add_partition("nand0", 0x00000, 0x40000, DEVFS_PARTITION_FIXED, "self_raw");
dev_add_bb_dev("self_raw", "self0");
devfs_del_partition("env_raw");
devfs_add_partition("nand0", 0x40000, 0x20000, DEVFS_PARTITION_FIXED, "env_raw");
dev_add_bb_dev("env_raw", "env0");
s3c24x0_bbu_nand_register_handler();
#endif
s3c24xx_add_mci(&mci_data);
s3c24xx_add_fb(&s3c24x0_fb_data);
s3c24xx_add_ohci();
armlinux_set_architecture(MACH_TYPE_MINI2440);
return 0;
}
static int a9m2440_devices_init(void)
{
uint32_t reg;
/* ----------- configure the access to the outer space ---------- */
reg = readl(S3C_BWSCON);
/* CS#5 to access the network controller */
reg &= ~0x00f00000;
reg |= 0x00d00000; /* 16 bit */
writel(0x1f4c, S3C_BANKCON5);
writel(reg, S3C_BWSCON);
#ifdef CONFIG_MACH_A9M2410DEV
a9m2410dev_devices_init();
#endif
/* release the reset signal to external devices */
reg = readl(S3C_MISCCR);
reg |= 0x10000;
writel(reg, S3C_MISCCR);
/* ----------- the devices the boot loader should work with -------- */
s3c24xx_add_nand(&nand_info);
/*
* cs8900 network controller onboard
* Connected to CS line 5 + A24 and interrupt line EINT9,
* data width is 16 bit
*/
add_generic_device("cs8900", DEVICE_ID_DYNAMIC, NULL,
S3C_CS5_BASE + (1 << 24) + 0x300, 16, IORESOURCE_MEM, NULL);
#ifdef CONFIG_NAND
/* ----------- add some vital partitions -------- */
devfs_add_partition("nand0", 0x00000, 0x40000, DEVFS_PARTITION_FIXED, "self_raw");
dev_add_bb_dev("self_raw", "self0");
devfs_add_partition("nand0", 0x40000, 0x20000, DEVFS_PARTITION_FIXED, "env_raw");
dev_add_bb_dev("env_raw", "env0");
#endif
armlinux_set_bootparams((void*)S3C_SDRAM_BASE + 0x100);
armlinux_set_architecture(MACH_TYPE_A9M2440);
return 0;
}
static int pm9g45_devices_init(void)
{
pm_add_device_nand();
pm9g45_add_device_mci();
pm9g45_phy_init();
at91_add_device_eth(0, &macb_pdata);
pm9g45_add_device_usbh();
devfs_add_partition("nand0", 0x00000, 0x80000, PARTITION_FIXED, "self_raw");
dev_add_bb_dev("self_raw", "self0");
devfs_add_partition("nand0", 0x40000, 0x40000, PARTITION_FIXED, "env_raw");
dev_add_bb_dev("env_raw", "env0");
armlinux_set_bootparams((void *)(AT91_CHIPSELECT_6 + 0x100));
armlinux_set_architecture(MACH_TYPE_PM9G45);
return 0;
}
