OT_WEAK void dll_beacon_applet(m2session* active) {
/// Beaconing is a Request-TX operation, and the value for Tc is the amount of
/// time to spend in CSMA before quitting the beacon.
ot_queue beacon_queue;
ot_u8 b_params;
ot_u8 cmd_ext;
ot_u8 cmd_code;
b_params = active->extra;
active->extra = 0;
/// Start building the beacon packet:
/// <LI> Calling m2np_header() will write most of the front of the frame </LI>
/// <LI> Add the command byte and optional command-extension byte </LI>
m2np_header(active, M2RT_BROADCAST, M2FI_FRDIALOG);
cmd_ext = (b_params & 0x06); // Normal extension bits
cmd_ext |= (dll.netconf.btemp[2] == 0) << 6; // Announcement No-File bit
cmd_code = 0x20 | (b_params & 1) | ((cmd_ext!=0) << 7);
q_writebyte(&txq, cmd_code);
if (cmd_code) {
q_writebyte(&txq, cmd_ext);
}
/// Setup the comm parameters, if the channel is available:
/// <LI> dll.comm values tx_eirp, cs_rssi, and cca_rssi must be set by the
/// radio module during the CSMA-CA process -- don't set them here.
/// The DASH7 spec requires it to happen in this order. </LI>
/// <LI> Set CSMA-CA parameters, which are used by the radio module </LI>
/// <LI> Set number of redundant TX's we would like to transmit </LI>
/// <LI> Set rx_timeout for Default-Tg or 0, if beacon has no response </LI>
dll_set_defaults(active);
dll.comm.tc = TI2CLK(M2_PARAM_BEACON_TCA);
dll.comm.rx_timeout = (b_params & 0x02) ? \
0 : rm2_default_tgd(active->channel);
dll.comm.csmaca_params |= (b_params & 0x04) | M2_CSMACA_NA2P | M2_CSMACA_MACCA;
dll.comm.redundants = dll.netconf.b_attempts;
q_writebyte(&txq, (ot_u8)dll.comm.rx_timeout);
/// Add the announcement file data if the specified return data != 0 bytes.
/// If the beacon data is missing or otherwise not accessible by the GUEST
/// user, dump the session (thus killing the beacon) and go back to idle.
if (dll.netconf.btemp[2] != 0) {
q_init(&beacon_queue, &dll.netconf.btemp[2], 4);
if (m2qp_isf_call((b_params & 1), &beacon_queue, AUTH_GUEST) < 0) {
session_pop();
dll_idle();
return;
}
}
/// Final step to any packet generation: add footer
m2np_footer();
}
OT_WEAK void dll_scan_applet(m2session* active) {
/// Scanning is a Request-RX operation, so Tc is not important.
ot_long timeout;
ot_u8 scan_code;
dll_set_defaults(active);
scan_code = active->extra;
active->extra = 0;
timeout = otutils_calc_timeout(scan_code);
if (timeout > 65535) {
timeout = 65535;
}
dll.comm.rx_timeout = (ot_u16)timeout;
//dll.comm.csmaca_params = 0;
}
OT_WEAK ot_u16 otapi_open_request(addr_type addr, routing_tmpl* routing) {
/// Set the header if the session is valid. Also conditionally write the header
/// depending on the address type (a parameter).
if (session_notempty()) {
m2session* s_active;
s_active = session_top();
// Set the dll parameters to a safe setting; can be changed later
dll_set_defaults(s_active);
// Unicast/Anycast support routing, so copy the supplied template
if ((addr & M2QUERY_GLOBAL) == 0) {
platform_memcpy((ot_u8*)&m2np.rt, (ot_u8*)routing, sizeof(routing_tmpl));
}
// Load the header
m2np_header(s_active, (ot_u8)addr, M2FI_FRDIALOG);
return 1;
}
return 0;
}
/** External DLL applets <BR>
* ========================================================================<BR>
*/
OT_WEAK void dll_default_applet(m2session* active) {
dll_set_defaults(active);
}
