C++ (Cpp) dsa_slave_phy_setup示例

示例#1

文件： slave.c 项目： Abioy/kasan

struct net_device *
dsa_slave_create(struct dsa_switch *ds, struct device *parent,
		 int port, char *name)
{
	struct net_device *master = ds->dst->master_netdev;
	struct net_device *slave_dev;
	struct dsa_slave_priv *p;
	int ret;

	slave_dev = alloc_netdev(sizeof(struct dsa_slave_priv), name,
				 NET_NAME_UNKNOWN, ether_setup);
	if (slave_dev == NULL)
		return slave_dev;

	slave_dev->features = master->vlan_features;
	slave_dev->ethtool_ops = &dsa_slave_ethtool_ops;
	eth_hw_addr_inherit(slave_dev, master);
	slave_dev->tx_queue_len = 0;
	slave_dev->netdev_ops = &dsa_slave_netdev_ops;

	SET_NETDEV_DEV(slave_dev, parent);
	slave_dev->dev.of_node = ds->pd->port_dn[port];
	slave_dev->vlan_features = master->vlan_features;

	p = netdev_priv(slave_dev);
	p->dev = slave_dev;
	p->parent = ds;
	p->port = port;

	switch (ds->dst->tag_protocol) {
#ifdef CONFIG_NET_DSA_TAG_DSA
	case DSA_TAG_PROTO_DSA:
		p->xmit = dsa_netdev_ops.xmit;
		break;
#endif
#ifdef CONFIG_NET_DSA_TAG_EDSA
	case DSA_TAG_PROTO_EDSA:
		p->xmit = edsa_netdev_ops.xmit;
		break;
#endif
#ifdef CONFIG_NET_DSA_TAG_TRAILER
	case DSA_TAG_PROTO_TRAILER:
		p->xmit = trailer_netdev_ops.xmit;
		break;
#endif
#ifdef CONFIG_NET_DSA_TAG_BRCM
	case DSA_TAG_PROTO_BRCM:
		p->xmit = brcm_netdev_ops.xmit;
		break;
#endif
	default:
		p->xmit	= dsa_slave_notag_xmit;
		break;
	}

	p->old_pause = -1;
	p->old_link = -1;
	p->old_duplex = -1;

	ret = dsa_slave_phy_setup(p, slave_dev);
	if (ret) {
		free_netdev(slave_dev);
		return NULL;
	}

	ret = register_netdev(slave_dev);
	if (ret) {
		netdev_err(master, "error %d registering interface %s\n",
			   ret, slave_dev->name);
		phy_disconnect(p->phy);
		free_netdev(slave_dev);
		return NULL;
	}

	netif_carrier_off(slave_dev);

	return slave_dev;
}

示例#2

文件： slave.c 项目： andy-shev/linux

int dsa_slave_create(struct dsa_switch *ds, struct device *parent,
		     int port, char *name)
{
	struct net_device *master = ds->dst->master_netdev;
	struct net_device *slave_dev;
	struct dsa_slave_priv *p;
	int ret;

	slave_dev = alloc_netdev(sizeof(struct dsa_slave_priv), name,
				 NET_NAME_UNKNOWN, ether_setup);
	if (slave_dev == NULL)
		return -ENOMEM;

	slave_dev->features = master->vlan_features;
	slave_dev->ethtool_ops = &dsa_slave_ethtool_ops;
	eth_hw_addr_inherit(slave_dev, master);
	slave_dev->priv_flags |= IFF_NO_QUEUE;
	slave_dev->netdev_ops = &dsa_slave_netdev_ops;
	slave_dev->switchdev_ops = &dsa_slave_switchdev_ops;
	SET_NETDEV_DEVTYPE(slave_dev, &dsa_type);

	netdev_for_each_tx_queue(slave_dev, dsa_slave_set_lockdep_class_one,
				 NULL);

	SET_NETDEV_DEV(slave_dev, parent);
	slave_dev->dev.of_node = ds->pd->port_dn[port];
	slave_dev->vlan_features = master->vlan_features;

	p = netdev_priv(slave_dev);
	p->dev = slave_dev;
	p->parent = ds;
	p->port = port;

	switch (ds->dst->tag_protocol) {
#ifdef CONFIG_NET_DSA_TAG_DSA
	case DSA_TAG_PROTO_DSA:
		p->xmit = dsa_netdev_ops.xmit;
		break;
#endif
#ifdef CONFIG_NET_DSA_TAG_EDSA
	case DSA_TAG_PROTO_EDSA:
		p->xmit = edsa_netdev_ops.xmit;
		break;
#endif
#ifdef CONFIG_NET_DSA_TAG_TRAILER
	case DSA_TAG_PROTO_TRAILER:
		p->xmit = trailer_netdev_ops.xmit;
		break;
#endif
#ifdef CONFIG_NET_DSA_TAG_BRCM
	case DSA_TAG_PROTO_BRCM:
		p->xmit = brcm_netdev_ops.xmit;
		break;
#endif
	default:
		p->xmit	= dsa_slave_notag_xmit;
		break;
	}

	p->old_pause = -1;
	p->old_link = -1;
	p->old_duplex = -1;

	ds->ports[port] = slave_dev;
	ret = register_netdev(slave_dev);
	if (ret) {
		netdev_err(master, "error %d registering interface %s\n",
			   ret, slave_dev->name);
		ds->ports[port] = NULL;
		free_netdev(slave_dev);
		return ret;
	}

	netif_carrier_off(slave_dev);

	ret = dsa_slave_phy_setup(p, slave_dev);
	if (ret) {
		netdev_err(master, "error %d setting up slave phy\n", ret);
		unregister_netdev(slave_dev);
		free_netdev(slave_dev);
		return ret;
	}

	return 0;
}

示例#3

文件： slave.c 项目： Amitabha2001/linux

struct net_device *
dsa_slave_create(struct dsa_switch *ds, struct device *parent,
		 int port, char *name)
{
	struct net_device *master = ds->dst->master_netdev;
	struct net_device *slave_dev;
	struct dsa_slave_priv *p;
	int ret;

	slave_dev = alloc_netdev(sizeof(struct dsa_slave_priv), name,
				 NET_NAME_UNKNOWN, ether_setup);
	if (slave_dev == NULL)
		return slave_dev;

	slave_dev->features = master->vlan_features;
	slave_dev->ethtool_ops = &dsa_slave_ethtool_ops;
	eth_hw_addr_inherit(slave_dev, master);
	slave_dev->tx_queue_len = 0;
	slave_dev->netdev_ops = &dsa_slave_netdev_ops;

	SET_NETDEV_DEV(slave_dev, parent);
	slave_dev->dev.of_node = ds->pd->port_dn[port];
	slave_dev->vlan_features = master->vlan_features;

	p = netdev_priv(slave_dev);
	p->dev = slave_dev;
	p->parent = ds;
	p->port = port;

	switch (ds->dst->tag_protocol) {
#ifdef CONFIG_NET_DSA_TAG_DSA
	case DSA_TAG_PROTO_DSA:
		p->xmit = dsa_netdev_ops.xmit;
		break;
#endif
#ifdef CONFIG_NET_DSA_TAG_EDSA
	case DSA_TAG_PROTO_EDSA:
		p->xmit = edsa_netdev_ops.xmit;
		break;
#endif
#ifdef CONFIG_NET_DSA_TAG_TRAILER
	case DSA_TAG_PROTO_TRAILER:
		p->xmit = trailer_netdev_ops.xmit;
		break;
#endif
#ifdef CONFIG_NET_DSA_TAG_BRCM
	case DSA_TAG_PROTO_BRCM:
		p->xmit = brcm_netdev_ops.xmit;
		break;
#endif
	default:
		p->xmit	= dsa_slave_notag_xmit;
		break;
	}

	p->old_pause = -1;
	p->old_link = -1;
	p->old_duplex = -1;

	dsa_slave_phy_setup(p, slave_dev);

	ret = register_netdev(slave_dev);
	if (ret) {
		printk(KERN_ERR "%s: error %d registering interface %s\n",
				master->name, ret, slave_dev->name);
		free_netdev(slave_dev);
		return NULL;
	}

	netif_carrier_off(slave_dev);

	if (p->phy != NULL) {
		if (ds->drv->get_phy_flags)
			p->phy->dev_flags |= ds->drv->get_phy_flags(ds, port);

		phy_attach(slave_dev, dev_name(&p->phy->dev),
			   PHY_INTERFACE_MODE_GMII);

		p->phy->autoneg = AUTONEG_ENABLE;
		p->phy->speed = 0;
		p->phy->duplex = 0;
		p->phy->advertising = p->phy->supported | ADVERTISED_Autoneg;
	}

	return slave_dev;
}