/**
* Checks that the max transfer size allowed in a host channel is large enough
* to handle the maximum data transfer in a single (micro)frame for a periodic
* transfer.
*
* @param hcd The HCD state structure for the DWC OTG controller.
* @param qh QH for a periodic endpoint.
*
* @return 0 if successful, negative error code otherwise.
*/
static int check_max_xfer_size(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh)
{
int status;
uint32_t max_xfer_size;
uint32_t max_channel_xfer_size;
status = 0;
max_xfer_size = dwc_max_packet(qh->maxp) * dwc_hb_mult(qh->maxp);
max_channel_xfer_size = hcd->core_if->core_params->max_transfer_size;
if (max_xfer_size > max_channel_xfer_size) {
DWC_NOTICE("%s: Periodic xfer length %d > "
"max xfer length for channel %d\n",
__func__, max_xfer_size, max_channel_xfer_size);
status = -ENOSPC;
}
return status;
}
/** Initializes a QH structure.
*
* @param[in] _hcd The HCD state structure for the DWC OTG controller.
* @param[in] _qh The QH to init.
* @param[in] _urb Holds the information about the device/endpoint that we need
* to initialize the QH. */
#define SCHEDULE_SLOP 10
#define SCHEDULE_SPLIT_SLOP 10 /* 1 == 125us, 10 -> 1.25ms, 20 -> 2.5ms, */
void dwc_otg_hcd_qh_init(dwc_otg_hcd_t * _hcd, dwc_otg_qh_t * _qh,
struct urb *_urb)
{
memset(_qh, 0, sizeof(dwc_otg_qh_t));
/* Initialize QH */
switch (usb_pipetype(_urb->pipe)) {
case PIPE_CONTROL:
_qh->ep_type = USB_ENDPOINT_XFER_CONTROL;
break;
case PIPE_BULK:
_qh->ep_type = USB_ENDPOINT_XFER_BULK;
break;
case PIPE_ISOCHRONOUS:
_qh->ep_type = USB_ENDPOINT_XFER_ISOC;
break;
case PIPE_INTERRUPT:
_qh->ep_type = USB_ENDPOINT_XFER_INT;
break;
}
_qh->ep_is_in = usb_pipein(_urb->pipe) ? 1 : 0;
_qh->data_toggle = DWC_OTG_HC_PID_DATA0;
_qh->maxp =
usb_maxpacket(_urb->dev, _urb->pipe, !(usb_pipein(_urb->pipe)));
INIT_LIST_HEAD(&_qh->qtd_list);
INIT_LIST_HEAD(&_qh->qh_list_entry);
_qh->channel = NULL;
/* FS/LS Enpoint on HS Hub
* NOT virtual root hub */
_qh->do_split = 0;
if (((_urb->dev->speed == USB_SPEED_LOW) ||
(_urb->dev->speed == USB_SPEED_FULL)) &&
(_urb->dev->tt) && (_urb->dev->tt->hub)
&& (_urb->dev->tt->hub->devnum != 1)) {
DWC_DEBUGPL(DBG_HCD,
"QH init: EP %d: TT found at hub addr %d, for port %d\n",
usb_pipeendpoint(_urb->pipe),
_urb->dev->tt->hub->devnum, _urb->dev->ttport);
_qh->do_split = 1;
}
if (_qh->ep_type == USB_ENDPOINT_XFER_INT ||
_qh->ep_type == USB_ENDPOINT_XFER_ISOC) {
/* Compute scheduling parameters once and save them. */
hprt0_data_t hprt;
/** @todo Account for split transfers in the bus time. */
int bytecount =
dwc_hb_mult(_qh->maxp) * dwc_max_packet(_qh->maxp);
int usecs = /*FIXME: hardcode to highspeed, to fix Full/Low speed device via Hub*/
usb_calc_bus_time(/*_urb->dev->speed*/USB_SPEED_HIGH, usb_pipein(_urb->pipe),
(_qh->ep_type == USB_ENDPOINT_XFER_ISOC),
bytecount);
_qh->usecs = NS_TO_US(usecs);
/* Start in a slightly future (micro)frame. */
_qh->sched_frame = dwc_frame_num_inc(_hcd->frame_number,
SCHEDULE_SLOP);
_qh->interval = _urb->interval;
#if 0
/* Increase interrupt polling rate for debugging. */
if (_qh->ep_type == USB_ENDPOINT_XFER_INT) {
_qh->interval = 8;
}
#endif
hprt.d32 = dwc_read_reg32(_hcd->core_if->host_if->hprt0);
if ((hprt.b.prtspd == DWC_HPRT0_PRTSPD_HIGH_SPEED) &&
((_urb->dev->speed == USB_SPEED_LOW) ||
(_urb->dev->speed == USB_SPEED_FULL))) {
_qh->interval *= 8;
_qh->sched_frame |= 0x7;
_qh->start_split_frame = _qh->sched_frame;
}
}else{
if(_qh->do_split){
_qh->interval = SCHEDULE_SPLIT_SLOP;
_qh->sched_frame = dwc_frame_num_inc(_hcd->frame_number,
_qh->interval);
};
}
DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD QH Initialized\n");
DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - qh = %p\n", _qh);
DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - Device Address = %d\n",
_urb->dev->devnum);
DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - Endpoint %d, %s\n",
usb_pipeendpoint(_urb->pipe),
usb_pipein(_urb->pipe) == USB_DIR_IN ? "IN" : "OUT");
DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - Speed = %s\n", ( {
char *speed;
switch(_urb->dev->speed) {
case USB_SPEED_LOW:
speed = "low"; break;
case USB_SPEED_FULL:
speed = "full"; break;
case USB_SPEED_HIGH:
speed = "high"; break;
default:
speed = "?"; break;};
speed;})) ;
void dwc_otg_hcd_qh_init(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh, struct urb *urb)
{
char *speed, *type;
memset (qh, 0, sizeof (dwc_otg_qh_t));
/* Initialize QH */
switch (usb_pipetype(urb->pipe)) {
case PIPE_CONTROL:
qh->ep_type = USB_ENDPOINT_XFER_CONTROL;
break;
case PIPE_BULK:
qh->ep_type = USB_ENDPOINT_XFER_BULK;
break;
case PIPE_ISOCHRONOUS:
qh->ep_type = USB_ENDPOINT_XFER_ISOC;
break;
case PIPE_INTERRUPT:
qh->ep_type = USB_ENDPOINT_XFER_INT;
break;
}
qh->ep_is_in = usb_pipein(urb->pipe) ? 1 : 0;
qh->data_toggle = DWC_OTG_HC_PID_DATA0;
qh->maxp = usb_maxpacket(urb->dev, urb->pipe, !(usb_pipein(urb->pipe)));
INIT_LIST_HEAD(&qh->qtd_list);
INIT_LIST_HEAD(&qh->qh_list_entry);
qh->channel = NULL;
/* FS/LS Enpoint on HS Hub
* NOT virtual root hub */
qh->do_split = 0;
if (((urb->dev->speed == USB_SPEED_LOW) ||
(urb->dev->speed == USB_SPEED_FULL)) &&
(urb->dev->tt) && (urb->dev->tt->hub) && (urb->dev->tt->hub->devnum != 1))
{
DWC_DEBUGPL(DBG_HCD, "QH init: EP %d: TT found at hub addr %d, for port %d\n",
usb_pipeendpoint(urb->pipe), urb->dev->tt->hub->devnum,
urb->dev->ttport);
qh->do_split = 1;
}
if (qh->ep_type == USB_ENDPOINT_XFER_INT ||
qh->ep_type == USB_ENDPOINT_XFER_ISOC) {
/* Compute scheduling parameters once and save them. */
hprt0_data_t hprt;
/** @todo Account for split transfers in the bus time. */
int bytecount = dwc_hb_mult(qh->maxp) * dwc_max_packet(qh->maxp);
/* FIXME: work-around patch by Steven */
qh->usecs = NS_TO_US(usb_calc_bus_time(urb->dev->speed,
usb_pipein(urb->pipe),
(qh->ep_type == USB_ENDPOINT_XFER_ISOC),
bytecount));
/* Start in a slightly future (micro)frame. */
qh->sched_frame = dwc_frame_num_inc(hcd->frame_number,
SCHEDULE_SLOP);
qh->interval = urb->interval;
#if 0
/* Increase interrupt polling rate for debugging. */
if (qh->ep_type == USB_ENDPOINT_XFER_INT) {
qh->interval = 8;
}
#endif
hprt.d32 = dwc_read_reg32(hcd->core_if->host_if->hprt0);
if ((hprt.b.prtspd == DWC_HPRT0_PRTSPD_HIGH_SPEED) &&
((urb->dev->speed == USB_SPEED_LOW) ||
(urb->dev->speed == USB_SPEED_FULL))) {
qh->interval *= 8;
qh->sched_frame |= 0x7;
qh->start_split_frame = qh->sched_frame;
}
}
DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD QH Initialized\n");
DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - qh = %p\n", qh);
DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - Device Address = %d\n",
urb->dev->devnum);
DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - Endpoint %d, %s\n",
usb_pipeendpoint(urb->pipe),
usb_pipein(urb->pipe) == USB_DIR_IN ? "IN" : "OUT");
switch(urb->dev->speed) {
case USB_SPEED_LOW:
speed = "low";
break;
case USB_SPEED_FULL:
speed = "full";
break;
case USB_SPEED_HIGH:
speed = "high";
break;
default:
speed = "?";
break;
}
DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - Speed = %s\n", speed);
switch (qh->ep_type) {
case USB_ENDPOINT_XFER_ISOC:
type = "isochronous";
break;
case USB_ENDPOINT_XFER_INT:
type = "interrupt";
break;
case USB_ENDPOINT_XFER_CONTROL:
type = "control";
break;
case USB_ENDPOINT_XFER_BULK:
type = "bulk";
break;
default:
type = "?";
break;
}
DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - Type = %s\n",type);
#ifdef DEBUG
if (qh->ep_type == USB_ENDPOINT_XFER_INT) {
DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - usecs = %d\n",
qh->usecs);
DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - interval = %d\n",
qh->interval);
}
#endif
qh->dw_align_buf = NULL;
return;
}
