static int __init
setup_vga_console(struct pcdp_device *dev)
{
#if defined(CONFIG_VT) && defined(CONFIG_VGA_CONSOLE)
u8 *if_ptr;
if_ptr = ((u8 *)dev + sizeof(struct pcdp_device));
if (if_ptr[0] == PCDP_IF_PCI) {
struct pcdp_if_pci if_pci;
/* struct copy since ifptr might not be correctly aligned */
memcpy(&if_pci, if_ptr, sizeof(if_pci));
if (if_pci.trans & PCDP_PCI_TRANS_IOPORT)
vga_console_iobase = if_pci.ioport_tra;
if (if_pci.trans & PCDP_PCI_TRANS_MMIO)
vga_console_membase = if_pci.mmio_tra;
}
if (efi_mem_type(vga_console_membase + 0xA0000) == EFI_CONVENTIONAL_MEMORY) {
printk(KERN_ERR "PCDP: VGA selected, but frame buffer is not MMIO!\n");
return -ENODEV;
}
conswitchp = &vga_con;
printk(KERN_INFO "PCDP: VGA console\n");
return 0;
#else
return -ENODEV;
#endif
}
static int __init
setup_vga_console(struct pcdp_vga *vga)
{
#if defined(CONFIG_VT) && defined(CONFIG_VGA_CONSOLE)
if (efi_mem_type(0xA0000) == EFI_CONVENTIONAL_MEMORY) {
printk(KERN_ERR "PCDP: VGA selected, but frame buffer is not MMIO!\n");
return -ENODEV;
}
conswitchp = &vga_con;
printk(KERN_INFO "PCDP: VGA console\n");
return 0;
#else
return -ENODEV;
#endif
}
void __init
setup_arch (char **cmdline_p)
{
unw_init();
ia64_patch_vtop((u64) __start___vtop_patchlist, (u64) __end___vtop_patchlist);
*cmdline_p = __va(ia64_boot_param->command_line);
strlcpy(saved_command_line, *cmdline_p, COMMAND_LINE_SIZE);
efi_init();
io_port_init();
#ifdef CONFIG_IA64_GENERIC
machvec_init(acpi_get_sysname());
#endif
if (early_console_setup(*cmdline_p) == 0)
mark_bsp_online();
#ifdef CONFIG_ACPI_BOOT
/* Initialize the ACPI boot-time table parser */
acpi_table_init();
# ifdef CONFIG_ACPI_NUMA
acpi_numa_init();
# endif
#else
# ifdef CONFIG_SMP
smp_build_cpu_map(); /* happens, e.g., with the Ski simulator */
# endif
#endif /* CONFIG_APCI_BOOT */
find_memory();
/* process SAL system table: */
ia64_sal_init(efi.sal_systab);
#ifdef CONFIG_SMP
cpu_physical_id(0) = hard_smp_processor_id();
#endif
cpu_init(); /* initialize the bootstrap CPU */
#ifdef CONFIG_ACPI_BOOT
acpi_boot_init();
#endif
#ifdef CONFIG_VT
if (!conswitchp) {
# if defined(CONFIG_DUMMY_CONSOLE)
conswitchp = &dummy_con;
# endif
# if defined(CONFIG_VGA_CONSOLE)
/*
* Non-legacy systems may route legacy VGA MMIO range to system
* memory. vga_con probes the MMIO hole, so memory looks like
* a VGA device to it. The EFI memory map can tell us if it's
* memory so we can avoid this problem.
*/
if (efi_mem_type(0xA0000) != EFI_CONVENTIONAL_MEMORY)
conswitchp = &vga_con;
# endif
}
#endif
/* enable IA-64 Machine Check Abort Handling unless disabled */
if (!strstr(saved_command_line, "nomca"))
ia64_mca_init();
platform_setup(cmdline_p);
paging_init();
}
void __init
setup_arch (char **cmdline_p)
{
unw_init();
ia64_patch_vtop((u64) __start___vtop_patchlist, (u64) __end___vtop_patchlist);
*cmdline_p = __va(ia64_boot_param->command_line);
strlcpy(saved_command_line, *cmdline_p, COMMAND_LINE_SIZE);
efi_init();
io_port_init();
parse_early_param();
#ifdef CONFIG_IA64_GENERIC
machvec_init(NULL);
#endif
if (early_console_setup(*cmdline_p) == 0)
mark_bsp_online();
#ifdef CONFIG_ACPI
/* Initialize the ACPI boot-time table parser */
acpi_table_init();
# ifdef CONFIG_ACPI_NUMA
acpi_numa_init();
# endif
#else
# ifdef CONFIG_SMP
smp_build_cpu_map(); /* happens, e.g., with the Ski simulator */
# endif
#endif /* CONFIG_APCI_BOOT */
find_memory();
/* process SAL system table: */
ia64_sal_init(__va(efi.sal_systab));
ia64_setup_printk_clock();
#ifdef CONFIG_SMP
cpu_physical_id(0) = hard_smp_processor_id();
cpu_set(0, cpu_sibling_map[0]);
cpu_set(0, cpu_core_map[0]);
check_for_logical_procs();
if (smp_num_cpucores > 1)
printk(KERN_INFO
"cpu package is Multi-Core capable: number of cores=%d\n",
smp_num_cpucores);
if (smp_num_siblings > 1)
printk(KERN_INFO
"cpu package is Multi-Threading capable: number of siblings=%d\n",
smp_num_siblings);
#endif
cpu_init(); /* initialize the bootstrap CPU */
mmu_context_init(); /* initialize context_id bitmap */
#ifdef CONFIG_ACPI
acpi_boot_init();
#endif
#ifdef CONFIG_VT
if (!conswitchp) {
# if defined(CONFIG_DUMMY_CONSOLE)
conswitchp = &dummy_con;
# endif
# if defined(CONFIG_VGA_CONSOLE)
/*
* Non-legacy systems may route legacy VGA MMIO range to system
* memory. vga_con probes the MMIO hole, so memory looks like
* a VGA device to it. The EFI memory map can tell us if it's
* memory so we can avoid this problem.
*/
if (efi_mem_type(0xA0000) != EFI_CONVENTIONAL_MEMORY)
conswitchp = &vga_con;
# endif
}
#endif
/* enable IA-64 Machine Check Abort Handling unless disabled */
if (!nomca)
ia64_mca_init();
platform_setup(cmdline_p);
paging_init();
}
void __init setup_arch(char **cmdline_p)
{
printk(KERN_INFO "Command line: %s\n", saved_command_line);
ROOT_DEV = old_decode_dev(ORIG_ROOT_DEV);
screen_info = SCREEN_INFO;
edid_info = EDID_INFO;
saved_video_mode = SAVED_VIDEO_MODE;
bootloader_type = LOADER_TYPE;
#ifdef CONFIG_BLK_DEV_RAM
rd_image_start = RAMDISK_FLAGS & RAMDISK_IMAGE_START_MASK;
rd_prompt = ((RAMDISK_FLAGS & RAMDISK_PROMPT_FLAG) != 0);
rd_doload = ((RAMDISK_FLAGS & RAMDISK_LOAD_FLAG) != 0);
#endif
#ifdef CONFIG_EFI
if (!strncmp(EFI_LOADER_SIG, "EFIL", 4))
efi_enabled = 1;
#endif
setup_memory_region();
copy_edd();
if (!MOUNT_ROOT_RDONLY)
root_mountflags &= ~MS_RDONLY;
init_mm.start_code = (unsigned long) &_text;
init_mm.end_code = (unsigned long) &_etext;
init_mm.end_data = (unsigned long) &_edata;
init_mm.brk = (unsigned long) &_end;
init_mm.pgd = __va(__pa_symbol(&init_level4_pgt));
code_resource.start = __pa_symbol(&_text);
code_resource.end = __pa_symbol(&_etext)-1;
data_resource.start = __pa_symbol(&_etext);
data_resource.end = __pa_symbol(&_edata)-1;
parse_cmdline_early(cmdline_p);
finish_e820_parsing();
early_identify_cpu(&boot_cpu_data);
/*
* partially used pages are not usable - thus
* we are rounding upwards:
*/
end_pfn = e820_end_of_ram();
num_physpages = end_pfn; /* for pfn_valid */
check_efer();
discover_ebda();
init_memory_mapping(0, (end_pfn_map << PAGE_SHIFT));
if (efi_enabled)
efi_map_memmap();
dmi_scan_machine();
/*
* VMware detection requires dmi to be available, so this
* needs to be done after dmi_scan_machine, for the BP.
*/
init_hypervisor(&boot_cpu_data);
/*
* init_hypervisor gets called more than one time throughout
* the life of the cpu, but that hurts kvm. We only need it
* once, so we do it explicitly here
*/
if (boot_cpu_data.x86_hyper_vendor == X86_HYPER_VENDOR_KVM)
kvmclock_init();
#ifdef CONFIG_ACPI
/*
* Initialize the ACPI boot-time table parser (gets the RSDP and SDT).
* Call this early for SRAT node setup.
*/
acpi_boot_table_init();
#endif
#ifdef CONFIG_ACPI_NUMA
/*
* Parse SRAT to discover nodes.
*/
acpi_numa_init();
#endif
#ifdef CONFIG_NUMA
numa_initmem_init(0, end_pfn);
#else
contig_initmem_init(0, end_pfn);
#endif
/* Reserve direct mapping */
reserve_bootmem_generic(table_start << PAGE_SHIFT,
(table_end - table_start) << PAGE_SHIFT,
BOOTMEM_DEFAULT);
/* reserve kernel */
reserve_bootmem_generic(__pa_symbol(&_text),
__pa_symbol(&_end) - __pa_symbol(&_text),
BOOTMEM_DEFAULT);
/*
* reserve physical page 0 - it's a special BIOS page on many boxes,
* enabling clean reboots, SMP operation, laptop functions.
*/
reserve_bootmem_generic(0, PAGE_SIZE, BOOTMEM_DEFAULT);
/* reserve ebda region */
if (ebda_addr)
reserve_bootmem_generic(ebda_addr, ebda_size,
BOOTMEM_DEFAULT);
#ifdef CONFIG_SMP
/* Reserve SMP trampoline */
reserve_bootmem_generic(SMP_TRAMPOLINE_BASE, 2*PAGE_SIZE,
BOOTMEM_DEFAULT);
#endif
#ifdef CONFIG_ACPI_SLEEP
/*
* Reserve low memory region for sleep support.
*/
acpi_reserve_bootmem();
#endif
#ifdef CONFIG_X86_LOCAL_APIC
/*
* Find and reserve possible boot-time SMP configuration:
*/
find_smp_config();
#endif
#ifdef CONFIG_BLK_DEV_INITRD
if (LOADER_TYPE && INITRD_START) {
if (INITRD_START + INITRD_SIZE <= (end_pfn << PAGE_SHIFT)) {
reserve_bootmem_generic(INITRD_START, INITRD_SIZE,
BOOTMEM_DEFAULT);
initrd_start =
INITRD_START ? INITRD_START + PAGE_OFFSET : 0;
initrd_end = initrd_start+INITRD_SIZE;
}
else {
printk(KERN_ERR "initrd extends beyond end of memory "
"(0x%08lx > 0x%08lx)\ndisabling initrd\n",
(unsigned long)(INITRD_START + INITRD_SIZE),
(unsigned long)(end_pfn << PAGE_SHIFT));
initrd_start = 0;
}
}
#endif
#ifdef CONFIG_KEXEC
if ((crashk_res.start < crashk_res.end) &&
(crashk_res.end <= (end_pfn << PAGE_SHIFT))) {
if (reserve_bootmem_generic(crashk_res.start,
crashk_res.end - crashk_res.start + 1,
BOOTMEM_EXCLUSIVE) < 0) {
printk(KERN_ERR "crashkernel reservation failed - "
"memory is in use\n");
crashk_res.start = crashk_res.end = 0;
}
}
else {
printk(KERN_ERR "Memory for crash kernel (0x%lx to 0x%lx) not"
"within permissible range\ndisabling kdump\n",
crashk_res.start, crashk_res.end);
crashk_res.end = 0;
crashk_res.start = 0;
}
#endif
reserve_ibft_region();
paging_init();
check_ioapic();
/*
* set this early, so we dont allocate cpu0
* if MADT list doesnt list BSP first
* mpparse.c/MP_processor_info() allocates logical cpu numbers.
*/
cpu_set(0, cpu_present_map);
#ifdef CONFIG_ACPI
/*
* Read APIC and some other early information from ACPI tables.
*/
acpi_boot_init();
#endif
init_cpu_to_node();
#ifdef CONFIG_X86_LOCAL_APIC
/*
* get boot-time SMP configuration:
*/
if (smp_found_config)
get_smp_config();
init_apic_mappings();
#endif
/*
* Request address space for all standard RAM and ROM resources
* and also for regions reported as reserved by the e820.
*/
probe_roms();
e820_reserve_resources();
e820_mark_nosave_regions();
request_resource(&iomem_resource, &video_ram_resource);
{
unsigned i;
/* request I/O space for devices used on all i[345]86 PCs */
for (i = 0; i < STANDARD_IO_RESOURCES; i++)
request_resource(&ioport_resource, &standard_io_resources[i]);
}
e820_setup_gap();
#ifdef CONFIG_VT
#if defined(CONFIG_VGA_CONSOLE)
if (!efi_enabled || (efi_mem_type(0xa0000) != EFI_CONVENTIONAL_MEMORY))
conswitchp = &vga_con;
#elif defined(CONFIG_DUMMY_CONSOLE)
conswitchp = &dummy_con;
#endif
#endif
}
void __init
setup_arch (char **cmdline_p)
{
extern unsigned long ia64_iobase;
unsigned long phys_iobase;
unw_init();
ia64_patch_vtop((u64) __start___vtop_patchlist, (u64) __end___vtop_patchlist);
*cmdline_p = __va(ia64_boot_param->command_line);
strlcpy(saved_command_line, *cmdline_p, sizeof(saved_command_line));
efi_init();
#ifdef CONFIG_ACPI_BOOT
/* Initialize the ACPI boot-time table parser */
acpi_table_init();
# ifdef CONFIG_ACPI_NUMA
acpi_numa_init();
# endif
#else
# ifdef CONFIG_SMP
smp_build_cpu_map(); /* happens, e.g., with the Ski simulator */
# endif
#endif /* CONFIG_APCI_BOOT */
find_memory();
/* process SAL system table: */
ia64_sal_init(efi.sal_systab);
#ifdef CONFIG_IA64_GENERIC
machvec_init(acpi_get_sysname());
#endif
/*
* Set `iobase' to the appropriate address in region 6 (uncached access range).
*
* The EFI memory map is the "preferred" location to get the I/O port space base,
* rather the relying on AR.KR0. This should become more clear in future SAL
* specs. We'll fall back to getting it out of AR.KR0 if no appropriate entry is
* found in the memory map.
*/
phys_iobase = efi_get_iobase();
if (phys_iobase)
/* set AR.KR0 since this is all we use it for anyway */
ia64_set_kr(IA64_KR_IO_BASE, phys_iobase);
else {
phys_iobase = ia64_get_kr(IA64_KR_IO_BASE);
printk(KERN_INFO "No I/O port range found in EFI memory map, falling back "
"to AR.KR0\n");
printk(KERN_INFO "I/O port base = 0x%lx\n", phys_iobase);
}
ia64_iobase = (unsigned long) ioremap(phys_iobase, 0);
/* setup legacy IO port space */
io_space[0].mmio_base = ia64_iobase;
io_space[0].sparse = 1;
num_io_spaces = 1;
#ifdef CONFIG_SMP
cpu_physical_id(0) = hard_smp_processor_id();
#endif
cpu_init(); /* initialize the bootstrap CPU */
#ifdef CONFIG_ACPI_BOOT
acpi_boot_init();
#endif
#ifdef CONFIG_SERIAL_8250_HCDP
if (efi.hcdp) {
void setup_serial_hcdp(void *);
setup_serial_hcdp(efi.hcdp);
}
#endif
#ifdef CONFIG_SERIAL_8250_CONSOLE
/*
* Without HCDP, we won't discover any serial ports until the serial driver looks
* in the ACPI namespace. If ACPI claims there are some legacy devices, register
* the legacy COM ports so serial console works earlier. This is slightly dangerous
* because we don't *really* know whether there's anything there, but we hope that
* all new boxes will implement HCDP.
*/
{
extern unsigned char acpi_legacy_devices;
if (!efi.hcdp && acpi_legacy_devices)
setup_serial_legacy();
}
#endif
#ifdef CONFIG_VT
# if defined(CONFIG_DUMMY_CONSOLE)
conswitchp = &dummy_con;
# endif
# if defined(CONFIG_VGA_CONSOLE)
/*
* Non-legacy systems may route legacy VGA MMIO range to system
* memory. vga_con probes the MMIO hole, so memory looks like
* a VGA device to it. The EFI memory map can tell us if it's
* memory so we can avoid this problem.
*/
if (efi_mem_type(0xA0000) != EFI_CONVENTIONAL_MEMORY)
conswitchp = &vga_con;
# endif
#endif
#ifdef CONFIG_IA64_MCA
/* enable IA-64 Machine Check Abort Handling */
ia64_mca_init();
#endif
platform_setup(cmdline_p);
paging_init();
}
