static void em28xx_query_sbutton(struct work_struct *work)
{
/* Poll the register and see if the button is depressed */
struct em28xx *dev =
container_of(work, struct em28xx, sbutton_query_work.work);
int ret;
ret = em28xx_read_reg(dev, EM28XX_R0C_USBSUSP);
if (ret & EM28XX_R0C_USBSUSP_SNAPSHOT) {
u8 cleared;
/* Button is depressed, clear the register */
cleared = ((u8) ret) & ~EM28XX_R0C_USBSUSP_SNAPSHOT;
em28xx_write_regs(dev, EM28XX_R0C_USBSUSP, &cleared, 1);
/* Not emulate the keypress */
input_report_key(dev->sbutton_input_dev, EM28XX_SNAPSHOT_KEY,
1);
/* Now unpress the key */
input_report_key(dev->sbutton_input_dev, EM28XX_SNAPSHOT_KEY,
0);
}
/* Schedule next poll */
schedule_delayed_work(&dev->sbutton_query_work,
msecs_to_jiffies(EM28XX_SBUTTON_QUERY_INTERVAL));
}
/* Write a single register */
int em28xx_write_reg(struct em28xx *dev, u16 reg, u8 val)
{
return em28xx_write_regs(dev, reg, &val, 1);
}
int em28xx_ir_init(struct em28xx *dev)
{
struct em28xx_IR *ir;
struct input_dev *input_dev;
u8 ir_config;
int err = -ENOMEM;
if (dev->board.ir_codes == NULL) {
/* No remote control support */
return 0;
}
ir = kzalloc(sizeof(*ir), GFP_KERNEL);
input_dev = input_allocate_device();
if (!ir || !input_dev)
goto err_out_free;
ir->input = input_dev;
ir_config = EM2874_IR_RC5;
/* Adjust xclk based o IR table for RC5/NEC tables */
if (dev->board.ir_codes->ir_type == IR_TYPE_RC5) {
dev->board.xclk |= EM28XX_XCLK_IR_RC5_MODE;
ir->full_code = 1;
} else if (dev->board.ir_codes->ir_type == IR_TYPE_NEC) {
dev->board.xclk &= ~EM28XX_XCLK_IR_RC5_MODE;
ir_config = EM2874_IR_NEC;
ir->full_code = 1;
}
em28xx_write_reg_bits(dev, EM28XX_R0F_XCLK, dev->board.xclk,
EM28XX_XCLK_IR_RC5_MODE);
/* Setup the proper handler based on the chip */
switch (dev->chip_id) {
case CHIP_ID_EM2860:
case CHIP_ID_EM2883:
ir->get_key = default_polling_getkey;
break;
case CHIP_ID_EM2874:
ir->get_key = em2874_polling_getkey;
em28xx_write_regs(dev, EM2874_R50_IR_CONFIG, &ir_config, 1);
break;
default:
printk("Unrecognized em28xx chip id: IR not supported\n");
goto err_out_free;
}
/* This is how often we ask the chip for IR information */
ir->polling = 100; /* ms */
/* init input device */
snprintf(ir->name, sizeof(ir->name), "em28xx IR (%s)",
dev->name);
usb_make_path(dev->udev, ir->phys, sizeof(ir->phys));
strlcat(ir->phys, "/input0", sizeof(ir->phys));
err = ir_input_init(input_dev, &ir->ir, IR_TYPE_OTHER);
if (err < 0)
goto err_out_free;
input_dev->name = ir->name;
input_dev->phys = ir->phys;
input_dev->id.bustype = BUS_USB;
input_dev->id.version = 1;
input_dev->id.vendor = le16_to_cpu(dev->udev->descriptor.idVendor);
input_dev->id.product = le16_to_cpu(dev->udev->descriptor.idProduct);
input_dev->dev.parent = &dev->udev->dev;
/* record handles to ourself */
ir->dev = dev;
dev->ir = ir;
em28xx_ir_start(ir);
/* all done */
err = ir_input_register(ir->input, dev->board.ir_codes);
if (err)
goto err_out_stop;
return 0;
err_out_stop:
em28xx_ir_stop(ir);
dev->ir = NULL;
err_out_free:
kfree(ir);
return err;
}
